| Gasil® 23F | PQ Corporation | Gasil® 23F is a high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented, water based coatings and printing inks. | |
| Gasil® HP39 | PQ Corporation | Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and...weiterlesen Gasil® HP39 is a large particle, high performance silica gel specifically designed as an effective matting agent for high solids, low VOC, pigmented water based coatings. It provides excellent matting efficiency combined with minimal effect on clarity and mechanical film properties. verkürzen | |
| Colanyl Extender MS 530 - Filler | Clariant Plastics and Coatings (Dispersions) | Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC...weiterlesen Colanyl Extender MS 530 is an aqueous binder-free pigment preparation based on a colorless inorganic extender and manufactured without using alkyl phenol ethoxylated (APEO) additives. This aqueous pigment preparation is compatible with water-based low VOC and VOC-free decorative coatings.* verkürzen | Request Sample |
| Polyplate® P | KaMin Solutions | Polyplate® P is a high brightness, delaminated clay intended for use in latex paints, water flexography inks, water-based adhesives or water-based systems where increased hiding, tinting strength and improved hold out are desirable. | Request Sample |
| ImerPrint™ 02K | Imerys Kaolin | ImerPrint™ 02K is a pulverised ultrafine hydrous kaolin for use in both water-based and solvent-based inks. | |
| Polyplate® HMT | KaMin Solutions | Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crac...weiterlesen Polyplate® HMT is a high brightness, very high aspect ratio, delaminated kaolin, intended for use in water-borne coatings, adhesives, and sealants. The large, platy structure of Polyplate® HMT imparts increased hide, tinting strength, enamel holdout, crack resistance, and reinforcement properties in water based systems. verkürzen | Request Sample |
| OptiGloss™ | Imerys Kaolin | OptiGloss™ is an ultrafine hydrous kaolin extender designed specifically for use in water-based decorative gloss paints. | |
| OptiGloss™ XD | Imerys Kaolin | OptiGloss™ XD is an ultrafine hydrous kaolin extender, pre-dispersed for universal use in both water-based and solvent-based paints and coatings. | |
| Hydrite® PXNLC | Imerys Kaolin | Hydrite® PXNLC is a low conductivity hydrous kaolin (china clay) providing edge protection in solvent and water based industrial coating applications. | |
| Kamin® HG90 | KaMin Solutions | Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints.Kamin® HG90 is ideally suited for water-borne paint and ink applications, w...weiterlesen Kamin® HG90 is a high brightness, ultra-fine particle size, platy kaolin with moderate water demand providing good tinting strength, TiO2 extension and gloss in water based paints.Kamin® HG90 is ideally suited for water-borne paint and ink applications, where high brightness and whiteness are important. It has the physical form of spray dried beads or slurry. verkürzen | Request Sample |
| Gasil® HP230 | PQ Corporation | Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks ...weiterlesen Gasil® HP230 is a synthetic amorphous silica. It is used as a matting agent for thin film industrial coatings, inks and high transparency water-based coatings. Gasil® HP230 is a fine, light powder and care should be taken to avoid inhaling it. Face masks should be worn during handling and exhaust ventilation used if available. The material is neither silicotic nor acutely toxic, but safety requires sensible handling to minimise the creation of dust and build up of static electricity. verkürzen | |
| MICA-MU™ M2/1 | Imerys Performance Additives | MICA-MU™ M2/1 is a white, micronised mica. This product is used in water based decorative paints, solvent based decorative paints, protective and OEM coatings, as well as sealant primer applications. | |
| BENTONE® MA | Elementis | BENTONE® MA is a rheological additive based on a purified hectorite clay that imparts thixotropy and good anti-settling properties to water-borne systems. | Request Sample |
| Kamin® 35B | KaMin Solutions | Kamin® 35B is a general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used principally in water-based adhesives, paints, inks or where low surface area is important. | Request Sample |
| BURGESS NO. 10 | Burgess Pigment Company | BURGESS NO. 10 is a fine particle size, medium brightness hydrous kaolin clay. This product exhibits dispersion in water based, acid pH, alkyd, or solvent based coatings and inks, electrodeposition body primers, as well as EIFS. | |
| SYLOID® W 300 Matting Agent | GRACE | SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface ...weiterlesen SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface appearance and high film clarity. It is also characterized by improved mar and burnishing resistance, resistance to overgrind and sheen reduction. verkürzen | |
| SYLOID® W 300 Matting Agent | Univar Solutions | SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface ...weiterlesen SYLOID® W 300 Matting Agent is an amorphous silica appearing as a white free flowing powder. It is a matting or gloss control designed for use in water-based systems and thin films. This product exhibits low dust, ease of incorporation, excellent surface appearance and high film clarity. It is also characterized by improved mar and burnishing resistance, resistance to overgrind and sheen reduction. verkürzen | Request Sample |
| Nyacol® AL20SD | Nyacol Nano Technology | Nyacol® AL20SD is an alumina powder with a particle size of 60-90nm, a high-temperature coating/binder, that is dispersible in either water or ethylene glycol. This product is used in coating/binder applications where a water-based system cannot be used. | |
| BURGESS NO. 28 | Burgess Pigment Company | BURGESS NO. 28 is an ultra fine particle size, higher brightness hydrous kaolin clay. This product is used to extend TiO2 while maintaining tint strength and gloss. It is used extensively in water based satin and semigloss coating systems. | |
| Prizmalite P2011SL | Prizmalite Industries Inc. | Prizmalite P2011SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 3 to 6 microns. Prizmalite P2011SL can be used in solvent and water-based paint applications. | |
| SYLOID® ED 5 | Univar Solutions | SYLOID® ED 5 Matting Agent is a synthetic amorphous silica appearing as white free flowing powder. It has a remarkable high matting efficiency and is, therefore, mainly used for pigmented industrial and trade sales coatings, coil coatings, water-based sys...weiterlesen SYLOID® ED 5 Matting Agent is a synthetic amorphous silica appearing as white free flowing powder. It has a remarkable high matting efficiency and is, therefore, mainly used for pigmented industrial and trade sales coatings, coil coatings, water-based systems, and unsaturated UV-polyester finishes.5 verkürzen | Request Sample |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| DORVALIT® WSP | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | DORVALIT® WSP is a new functional material for water-based wood coatings. The product prevents staining and bleeding. DORVALIT® WSP is a green product without labelling requirements, it replaces organometallic systems currently in use and improves the ef...weiterlesen DORVALIT® WSP is a new functional material for water-based wood coatings. The product prevents staining and bleeding. DORVALIT® WSP is a green product without labelling requirements, it replaces organometallic systems currently in use and improves the effectiveness of anti-stain coatings. verkürzen | |
| BURGESS NO. 98 | Burgess Pigment Company | BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss...weiterlesen BURGESS NO. 98 is an ultra fine particle size, higher brightness hydrous kaolin clay that exhibits excellent tint strength and dispersion. This product is a well ground, premium extender of TiO2 in water based, solvent or alkyd semigloss, satin, and gloss paints. verkürzen | |
| Kamin® 80 | KaMin Solutions | Kamin® 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications. This product comes in the form of a white, milled f...weiterlesen Kamin® 80 is an economical, general purpose water-washed kaolin, with intermediate brightness. It is suitable for use in water-borne, solvent-borne and solvent-free paint, ink, and adhesive applications. This product comes in the form of a white, milled fine powder. verkürzen | Request Sample |
| Kamin® HG | KaMin Solutions | Kamin® HG is a kaolin clay is an economical, general purpose, water-washed kaolin with fine particle size and intermediate brightness. It is suitable for water borne paint, ink and adhesive applications. | Request Sample |
| SYLOID® W 500 Matting Agent | GRACE | SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and b...weiterlesen SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and burnishing resistance and resistance to overgrind. verkürzen | |
| SYLOID® W 500 Matting Agent | Univar Solutions | SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and b...weiterlesen SYLOID® W 500 Matting Agent is an amorphous, synthetic silica appearing as white, free flowing powder. It is a matting or gloss control agent designed for use in water-based systems. Its key features are low dust, ease of incorporation, improved mar and burnishing resistance and resistance to overgrind. verkürzen | Request Sample |
| Prizmalite P2050SL | Prizmalite Industries Inc. | Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coating...weiterlesen Prizmalite P2050SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 35 to 45 microns. Prizmalite P2050SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. verkürzen | |
| Prizmalite P2075SL | Prizmalite Industries Inc. | Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coating...weiterlesen Prizmalite P2075SL are solid soda lime glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 65 to 75 microns. Prizmalite P2075SL can be used in textile and vinyl coatings, solvent and water-based coatings, and tactile coatings. verkürzen | |
| Hanos TW01 | Hanwha Chemical Corporation | Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...weiterlesen Hanos TW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. verkürzen | |
| Hanos SW01 | Hanwha Chemical Corporation | Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications ...weiterlesen Hanos SW01 is a water-based CNT ink that has excellent surface resistance on film. Eco-friendly, it can impart electrostatic resistance, thermal and added strength to many products. It is well suited for use as a filler in various industrial applications such as conductive films or inks for chip trays. verkürzen | |
| RHODOLINE® OTE 600 | Univar Solutions | RHODOLINE® OTE 600 is an ecolabel compliant APE-free, low VOC and SVOC open time extender for waterborne coating formulations, which allows for improved applicability, flow and leveling, and film appearance. | Request Sample |
| Kamin® 35 | KaMin Solutions | Kamin® 35 is a general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used primarily in adhesives, paints, inks, or where low binder demand is important. This product provides holdout, barrier properties, reduc...weiterlesen Kamin® 35 is a general purpose, medium brightness, coarse particle size filler with low oil and water demand. It's used primarily in adhesives, paints, inks, or where low binder demand is important. This product provides holdout, barrier properties, reduced sheen, and minimal viscosity increase to coatings and inks. It's suitable for solvent, solvent-free and water based systems. verkürzen | Request Sample |
| Gasil® XE3100 | PQ Corporation | Gasil® XE3100 is a synthetic amorphous silica. It is used as an ultra high efficient silica matting agent. This product is suitable for wood, coil, and general industrial coatings. It performs well in waterbased formulations. | |
| BURGESS OPTIWHITE MX® | Burgess Pigment Company | BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based ...weiterlesen BURGESS OPTIWHITE MX® is a flash calcined clay exhibiting GE Brightness and extension of TiO2, whiteness, touchup, and tint strength. This product is used extensively in flat or low sheen interior/exterior trade sales water-based, alkyd, or solvent-based coatings by reducing the amount of TiO2 and lowering raw material costs while maintaining opacity, whiteness, and tint strength. verkürzen | |
| IMSIL® A-10 | Sibelco | IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability ov...weiterlesen IMSIL® A-10 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, it is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 2.4 microns. verkürzen | |
| Kamin® 611 | KaMin Solutions | Kamin® 611 is a high brightness, fine particle size, “naturally delaminated” kaolin clay with moderate water demand. Kamin® 611 is ideally suited for water-borne paint, ink, and adhesive applications where high gloss, holdout, and controlled rheology are ...weiterlesen Kamin® 611 is a high brightness, fine particle size, “naturally delaminated” kaolin clay with moderate water demand. Kamin® 611 is ideally suited for water-borne paint, ink, and adhesive applications where high gloss, holdout, and controlled rheology are important. verkürzen | Request Sample |
| Kamin® 80B | KaMin Solutions | Kamin® 80B is an economical, general purpose water washed kaolin, with intermediate brightness. It is suitable for use in water-borne paint, ink, and adhesive applications. This product comes in the physical form of spray dried beads or slurry. | Request Sample |
| Talkron® STYL | Provencale S.A. | Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust...weiterlesen Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust the gloss and whiteness of the end product. verkürzen | |
| SSAWB | PCI Group, Inc. | SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, san...weiterlesen SSAWB is a milky white additive allowing the formulator to create a sanding sealer from existing top coat products. It allows the wood to be sealed and filled completely prior to a finishing top coat. It provides a product which reduces grain raising, sands easily and is compatible with most water based topcoats. verkürzen | |
| EDAPLAN® 395 | Munzing Chemie | EDAPLAN® 395 is a liquid yellow, clear solution of high-molecular anionic copolymer in water. It is an anionic dispersing agent with low foam tendencies that are suitable for various aqueous systems. It is commonly used for common pigments and fillers. | |
| Stockalite™ | Imerys Kaolin | Stockalite™ is a specially predispersed china clay. This hydrous kaolin (china clay) has an alkaline pH and as the term predispersed implies, will disperse readily in aqueous media without the need for deflocculant addition. | |
| Devolite™ | Imerys Kaolin | Devolite™ is a specially predispersed china clay. This hydrous kaolin (china clay) has an alkaline pH and as the term predispersed implies, will disperse readily in aqueous media without the need for deflocculant addition. | |
| Prizmalite P2453BTA | Prizmalite Industries Inc. | Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coating...weiterlesen Prizmalite P2453BTA are hemispherically aluminum coated barium titanate glass microspheres. It is a fully inorganic product produced in a furnace and has an average diameter of 40 to 50 microns. Prizmalite P2453BTA can be used in textile and vinyl coatings, solvent and water-based coatings, reflective plastisol inks, tactile coatings, and reflective powder coatings. verkürzen | |
| IMSIL® 1240 | Sibelco | IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durabi...weiterlesen IMSIL® 1240 is silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 9.2 microns. verkürzen | |
| IMSIL® A-15 | Sibelco | IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, dura...weiterlesen IMSIL® A-15 is a silica filler produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. It is easily wetted and dispersed in either solvent or water-based systems, and is selected for its excellent tint retention, durability over prolonged exposure and resistance to dirt and weathering. This product has a median particle size of 3.5 microns. verkürzen | |
| GRANUCOL® Conduct 2.0 | Gebrüder Dorfner GmbH & Co. Kaolin- und Kristallquarzsand-Werke KG | GRANUCOL® Conduct 2.0 is a conductive quartz sand coated with synthetic resin. GRANUCOL® Conduct 2.0 enables a formulation of conductive, anti-static coatings with an electrical resistance of <109 Ω. It can be used with several binders, including EP, PU, ...weiterlesen GRANUCOL® Conduct 2.0 is a conductive quartz sand coated with synthetic resin. GRANUCOL® Conduct 2.0 enables a formulation of conductive, anti-static coatings with an electrical resistance of <109 Ω. It can be used with several binders, including EP, PU, PMMA, UP, acrylates, and other water based systems. Dorfner recommends testing for resin compatibility prior to use. verkürzen | |
| BURGESS OPTIWHITE® | Burgess Pigment Company | BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention...weiterlesen BURGESS OPTIWHITE® is a premium whiteness flash calcined extender for TiO2 exhibiting GE brightness used extensively in First Line interior/exterior flat or low sheen water based and alkyd paint systems. This product exhibits excellent whiteness retention and hiding when embedded in coatings and polymers. It can provide excellent dispersion, high hiding, and improved film properties. verkürzen | |
| Kamin® 90B | KaMin Solutions | Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of ...weiterlesen Kamin® 90B is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for water-borne applications where high gloss, holdout and controlled rheology are important. Kamin® 90B has the physical form of spray dried beads or slurry. verkürzen | Request Sample |
| Kamin® TEK 2001 | KaMin Solutions | Kamin® TEK 2001 is an ultra-fine particle size, high brightness water-washed kaolin clay, designed as an excellent TiO2 extender for paints, coatings and inks. It is easily dispersible in water-based systems using high-speed dispersers. The uniform, narro...weiterlesen Kamin® TEK 2001 is an ultra-fine particle size, high brightness water-washed kaolin clay, designed as an excellent TiO2 extender for paints, coatings and inks. It is easily dispersible in water-based systems using high-speed dispersers. The uniform, narrow particle size distribution and excellent color makes it the preferred extender for gloss latex paints where optimum TiO2 spacing is desired without adverse effect on gloss. verkürzen | Request Sample |
| Polyplate® P01 | KaMin Solutions | Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel h...weiterlesen Polyplate® P01 is a milled, high brightness, large particle size delaminated kaolin, intended for use in solvent and water-borne coatings, inks, and adhesives. The high aspect ratio of the large platy particles provides improved tinting strength, enamel holdout, and crack resistance. verkürzen | Request Sample |
| Kamin® 90 | KaMin Solutions | Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. K...weiterlesen Kamin® 90 is a high brightness, fine particle size, general-purpose filler with moderate water demand. It is ideally suited for solvent and water-borne paint, ink and adhesive applications where high gloss, holdout and controlled rheology are important. Kamin® 90 comes in the form of a white, milled fine powder. verkürzen | Request Sample |
| SYLOID® ED 30 Matting Agent | GRACE | SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coating...weiterlesen SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-borne furniture coatings; DIY wood finishes; artificial and natural leather coatings; and coatings for automotive plastic parts. verkürzen | |
| SYLOID® ED 30 Matting Agent | Univar Solutions | SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coating...weiterlesen SYLOID® ED 30 Matting Agent is a synthetic amorphous silica with special organic treatment, appearing as white free flowing powder. It is a wax-treated, high efficiency, high clarity, matting or gloss control agent designed for use in: UV -curable coatings; high quality water-borne and solvent-borne furniture coatings; DIY wood finishes; artificial and natural leather coatings; and coatings for automotive plastic parts. verkürzen | Request Sample |
| Kamin® 2000C | KaMin Solutions | Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 ex...weiterlesen Kamin® 2000C is KaMin's highest brightness, finest particle size, calcined kaolin clay. It has high oil absorption and water demand. It incorporates readily into solvent and water-borne coatings and inks, where it imparts sheen control and maximum TiO2 extension, tint strength, and brightness (whiteness). Its typical uses include inks and flat architectural coatings. verkürzen | Request Sample |
| Polygloss® 90 | KaMin Solutions | Polygloss® 90 is an ultra-fine particle size, high brightness kaolin, designed to provide ease of dispersion and improved gloss in both aqueous and solvent-borne coatings and inks. Polygloss® 90 specialty kaolin contributes to improved opacity through eff...weiterlesen Polygloss® 90 is an ultra-fine particle size, high brightness kaolin, designed to provide ease of dispersion and improved gloss in both aqueous and solvent-borne coatings and inks. Polygloss® 90 specialty kaolin contributes to improved opacity through efficient TiO2 spacing. It can be loaded to higher PVC values than standard extender pigments, without decreasing gloss and with minimal effect on viscosity. verkürzen | Request Sample |
| Kamin® 70C | KaMin Solutions | Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub ...weiterlesen Kamin® 70C is a high brightness, medium particle size, calcined kaolin. It has moderate oil absorption and water demand. Kamin® 70C incorporates readily into solvent and water-borne coatings, where it imparts TiO2 extension, brightness (whiteness), scrub resistance and sheen control. It is the workhorse of the industry with typical uses in flat and low sheen architectural coatings. verkürzen | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...weiterlesen LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. verkürzen | Request Sample |
| NeoGen® MX | Imerys Kaolin | NeoGen® MX is an engineered calcined kaolin designed to provide excellent optical performance in flat/low sheen interior and exterior architectural coating applications. The key features of NeoGen® MX include high brightness, improved tint strength, excel...weiterlesen NeoGen® MX is an engineered calcined kaolin designed to provide excellent optical performance in flat/low sheen interior and exterior architectural coating applications. The key features of NeoGen® MX include high brightness, improved tint strength, excellent touch-up and mechanical performance. Recommended for use in both solvent and water-borne flat/low sheen interior and exterior architectural coating applications. verkürzen | |
| SYLOID® 7000 Matting Agent | Univar Solutions | SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and sol...weiterlesen SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and solventborne furniture coatings; DIY wood finishes; natural and artificial leather coatings; coatings for automotive plastic parts; coatings for foils and laminates; and UV curable coatings. verkürzen | Request Sample |
| SYLOID® 7000 Matting Agent | GRACE | SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and sol...weiterlesen SYLOID® 7000 Matting Agent is an amorphous synthetic silica, with a special organic treatment, appearing as a white, free-flowing powder. It a wax-treated high efficiency, matting or gloss control agent designed for use in: high quality waterborne and solventborne furniture coatings; DIY wood finishes; natural and artificial leather coatings; coatings for automotive plastic parts; coatings for foils and laminates; and UV curable coatings. verkürzen | |
| Acti-Gel® 208 | Active Minerals | Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and hom...weiterlesen Acti-Gel® 208 purified attapulgite is a high quality, self-dispersing hydrated magnesium aluminosilicate intended for high performance use as a binder, thixotrope, reinforcement additive and anti-settling agent. This unique formulary tool suspends and homogeneously disperses other particles in liquid systems creating a very stable mixture yet enables higher loadings of solids without increasing viscosity. Acti-Gel 208 additive can be a simple fix for syneresis, pigment float & flooding and sedimentation problems in a wide range of water-based coatings. Its low dosage, and extremely low residue makes it a quick “post-add” solution for stability problems in existing coating formulas without changing its rheology, paint formula or packaging label. verkürzen | Request Sample |
| AKTISIL AM | Hoffmann Mineral | An activated SILLITIN Z 86, produced by modifying the surface with amino silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| LA-300 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...weiterlesen LA-300, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (22). LA-300 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. verkürzen | |
| LA-350 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...weiterlesen LA-350, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (23). LA-350 has a specific gravity of 2.45, a bulk density of 50 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. verkürzen | |
| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...weiterlesen LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. verkürzen | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...weiterlesen LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. verkürzen | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...weiterlesen LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. verkürzen | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...weiterlesen LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. verkürzen | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...weiterlesen LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. verkürzen | |
| SYLOID® RAD 2005 Matting Agent | Univar Solutions | SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2005 silica provides consistent gloss over varying coating weights and excellent gloss and viscosity stability. It is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. This product may also be suitable for other types of solvent and waterborne...weiterlesen SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2005 silica provides consistent gloss over varying coating weights and excellent gloss and viscosity stability. It is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. This product may also be suitable for other types of solvent and waterborne coatings. verkürzen | Request Sample |
| SYLOID® RAD 2005 Matting Agent | GRACE | SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2005 silica provides consistent gloss over varying coating weights and excellent gloss and viscosity stability. It is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. This product may also be suitable for other types of solvent and waterborne...weiterlesen SYLOID® RAD 2005 Matting Agent is an amorphous synthetic silica with a special organic treatment. It appears as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2005 silica provides consistent gloss over varying coating weights and excellent gloss and viscosity stability. It is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. This product may also be suitable for other types of solvent and waterborne coatings. verkürzen | |
| SYLOID® RAD 2105 Matting Agent | Univar Solutions | SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2105 silica provides consistent gloss over small varying coating weights and excellent gloss and viscosity stability. This product is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. SYLOID® RAD 2105 silica matting agent may also be suitable for other types of solvent and waterborne...weiterlesen SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2105 silica provides consistent gloss over small varying coating weights and excellent gloss and viscosity stability. This product is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. SYLOID® RAD 2105 silica matting agent may also be suitable for other types of solvent and waterborne coatings. verkürzen | Request Sample |
| SYLOID® RAD 2105 Matting Agent | GRACE | SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2105 silica provides consistent gloss over small varying coating weights and excellent gloss and viscosity stability. This product is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. SYLOID® RAD 2105 silica matting agent may also be suitable for other types of solvent and waterborne...weiterlesen SYLOID® RAD 2105 Matting Agent is an amorphous synthetic silica with a special organic treatment, appearing as a white, free-flowing powder. It is an easily dispersible matting agent specially designed for radiation-cured systems. With its controlled particle size distribution and novel surface treatment, it exhibits a high matting efficiency together with a low thickening effect. SYLOID® RAD 2105 silica provides consistent gloss over small varying coating weights and excellent gloss and viscosity stability. This product is mainly suitable for UV-cured systems, EB-cured systems and soft-feel coatings. SYLOID® RAD 2105 silica matting agent may also be suitable for other types of solvent and waterborne coatings. verkürzen | |
| Gasil® HP380 | PQ Corporation | Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on...weiterlesen Gasil® HP380 is a new PQ matting agent specially designed for the effective gloss reduction of Wood and Plastic Coatings. Formulations based on resins dissolved in organic solvents, dispersed in water or UV curable are all used in this sector depending on the performance requirements of the final coated component, its cost and the local legislation. Gasil® HP380 has displayed excellent weight effectiveness in most systems in which it has been tested. verkürzen | |
| Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...weiterlesen Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. verkürzen | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...weiterlesen AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. verkürzen | |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...weiterlesen AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). verkürzen | |
| ADDAPT® SilStab HL+ | ADDAPT Chemicals BV | ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preserva...weiterlesen ADDAPT® SilStab HL+ is a solvent-free, stabilized potassium silicate solution with a hydrophobic component in water. It is added to textured masonry coatings and interior paints. This product improves scrub resistance, is non-foaming, and free of preservatives. verkürzen | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| ADDAPT® SilStab L 50 | ADDAPT Chemicals BV | ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...weiterlesen ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. verkürzen | |
| Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...weiterlesen Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. verkürzen | |
| 3M™ Glass Bubbles S28HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...weiterlesen 3M™ Glass Bubbles S28HS are hollow glass spheres with a typical density of 0.28 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K1 | 3M Advanced Materials Division | 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...weiterlesen 3M™ Glass Bubbles K1 are hollow glass spheres with a typical density of 0.125 g/cc and an isostatic crush strength of 250 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S15 | 3M Advanced Materials Division | 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....weiterlesen 3M™ Glass Bubbles S15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S22 | 3M Advanced Materials Division | 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths...weiterlesen 3M™ Glass Bubbles S22 are hollow glass spheres with a typical density of 0.22 g/cc and an isostatic crush strength of 400 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K20 | 3M Advanced Materials Division | 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....weiterlesen 3M™ Glass Bubbles K20 are hollow glass spheres with a typical density of 0.20 g/cc and an isostatic crush strength of 500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S32 | 3M Advanced Materials Division | 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...weiterlesen 3M™ Glass Bubbles S32 are hollow glass spheres with a typical density of 0.32 g/cc and an isostatic crush strength of 2,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K46 | 3M Advanced Materials Division | 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...weiterlesen 3M™ Glass Bubbles SK46 are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K15 | 3M Advanced Materials Division | 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....weiterlesen 3M™ Glass Bubbles K15 are hollow glass spheres with a typical density of 0.15 g/cc and an isostatic crush strength of 300 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K25 | 3M Advanced Materials Division | 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths....weiterlesen 3M™ Glass Bubbles K25 are hollow glass spheres with a typical density of 0.25 g/cc and an isostatic crush strength of 750 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S35 | 3M Advanced Materials Division | 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...weiterlesen 3M™ Glass Bubbles S35 are hollow glass spheres with a typical density of 0.35 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S42XHS | 3M Advanced Materials Division | 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...weiterlesen 3M™ Glass Bubbles S42XHS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 8,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles XLD3000 | 3M Advanced Materials Division | 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush str...weiterlesen 3M™ Glass Bubbles XLD3000 are hollow glass spheres with a typical density of 0.23 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S38 | 3M Advanced Materials Division | 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengt...weiterlesen 3M™ Glass Bubbles S38 are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 4,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K42HS | 3M Advanced Materials Division | 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...weiterlesen 3M™ Glass Bubbles K42HS are hollow glass spheres with a typical density of 0.42 g/cc and an isostatic crush strength of 7,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles iM16K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...weiterlesen 3M™ Glass Bubbles iM16K are hollow glass spheres with a typical density of 0.46 g/cc and an isostatic crush strength of 16,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles iM30K | 3M Advanced Materials Division | 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stren...weiterlesen 3M™ Glass Bubbles iM30K are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 27,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S60 | 3M Advanced Materials Division | 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...weiterlesen 3M™ Glass Bubbles S60 are hollow glass spheres with a typical density of 0.6 g/cc and an isostatic crush strength of 6,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S60HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush stre...weiterlesen 3M™ Glass Bubbles S60HS are hollow glass spheres with a typical density of 0.60 g/cc and an isostatic crush strength of 18,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles K37 | 3M Advanced Materials Division | 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strength...weiterlesen 3M™ Glass Bubbles K37 are hollow glass spheres with a typical density of 0.37 g/cc and an isostatic crush strength of 3,000 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| 3M™ Glass Bubbles S38HS | 3M Advanced Materials Division | 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush streng...weiterlesen 3M™ Glass Bubbles S38HS are hollow glass spheres with a typical density of 0.38 g/cc and an isostatic crush strength of 5,500 psi. 3M™ Glass Bubbles are lightweight hollow glass microspheres with a broad range of densities, particle sizes and crush strengths. These general purpose spheres offer very good strength-to-density ratio and making them suitable for a variety of uses in the paints and coatings industry. These microspheres are used in applications from specialty architectural and industrial paints to lightweight spackling, caulks, adhesives and roof coatings. Manufacturers use 3M glass bubbles for their ability to help reduce weight, improve reflectivity, reduce shrinkage, enhance surface appearance and help reduce overall material costs. verkürzen | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior p...weiterlesen MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. verkürzen | |
| CoatForce® CF10 | Lapinus Fibres BV | CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. Th...weiterlesen CoatForce® CF10 is a high quality engineered mineral fibre. Its fibre length results in an excellent dispersion in various matrix materials e.g. water and solvent based resins, bitumen. CoatForce® CF10 has an off-white colour and very low shot content. The off-white colour makes it especially suitable for decorative applications. CoatForce® exhibits excellent performance at elevated temperatures. It will not contribute to a fire but act as a blocking medium and reduce the spread of flame. It can be used at temperatures up to 700 ºC for CoatForce®. CoatForce® provides reinforcement and dimensional stability to a composite. Well-dispersed fibres form a reinforcing network in the paint layer, significantly enhancing resistance to cracking, impact, chipping and wear. verkürzen | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. |
