| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 1040 | BYK | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | Request Sample |
| AQUACER 8075 | Univar Solutions | AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio o...weiterlesen AQUACER 8075 improves the mechanical resistance, increases filling capacity and produces an anti-slip effect. The above mentioned properties are generated by mixing the product with polymers in a ratio of 3:1 (solid wax to solid polymer). A mixing ratio of 1:6 increases the water- and alcohol-resistance, the protection against heel marks (= foot traffic resistance), and the dirt repellency. AQUACER 8075 is compatible with all known polymer dispersions and plasticizers. verkürzen | Request Sample |
| Chlorinated Polyolefin-YURON CP 20 | Yuron New Material | YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings. | |
| Dispurez 101 | Incorez Ltd. | Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with ...weiterlesen Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films derived from Dispurez 101 exhibit excellent water and chemical resistance. The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries. It is particularly suitable as a hard coating for rigid plastic substrates. verkürzen | |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...weiterlesen FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. verkürzen | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...weiterlesen FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. verkürzen | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...weiterlesen FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. verkürzen | |
| Flexonic™ 37 A | Lawter | Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal ...weiterlesen Flexonic™ 37 A is a nonionic, high-density polyethylene wax emulsion that functions as an additive in coatings and water-based inks where rub resistance, slip and block resistance and/or hardness are required. It can be used as an additive in wood, metal and paper coatings and in overprint varnishes where hardness and slip are needed, without much degradation of gloss. verkürzen | |
| High Chlorinated Polyethylene-YURON HCPE | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...weiterlesen High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. verkürzen | |
| High Chlorinated Polyethylene-YURON HCPE-M | Yuron New Material | High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...weiterlesen High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. verkürzen | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1305 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...weiterlesen High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. verkürzen | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1505 | Yuron New Material | YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...weiterlesen YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. verkürzen | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1510 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...weiterlesen High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. verkürzen | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1515 | Yuron New Material | High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...weiterlesen High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. verkürzen | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...weiterlesen HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. verkürzen | |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...weiterlesen Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. verkürzen | Request Sample |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems an...weiterlesen Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. verkürzen | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...weiterlesen Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. verkürzen | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...weiterlesen Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. verkürzen | |
| PE Wax Sunax 316 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can impro...weiterlesen PE Wax Sunax 316 is a kind of polyethylene wax. It has uniform particle size, with very good dispersability and gloss control, and is an excellent additive for high gloss coatings. It is suitable for solvent-based flexo inks and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. verkürzen | |
| PE Wax Sunax 375 | Yantai Suny Chem International Co., Ltd. | PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure...weiterlesen PE Wax Sunax 375 is a kind of polyethylene wax. It has uniform particle size, is easy to disperse, and is an excellent additive for high performance coatings. Sunax 375 is suitable for offset printing ink, and solvent based flexo printing ink, and gravure inks. It can improve the abrasion resistance, and reduce the coefficient of friction of solvent-based inks. It makes the ink of the benzene soluble and alcohol-soluble ink to have good ester adaptability. verkürzen | |
| POLYBATCH® CRR 3971 | ICO Polymers | POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the ...weiterlesen POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the substrate. POLYBATCH® CRR 3971 is used in extrusion lamination, coextrusion coating, and for coatings on different substrates such as kraft, board and paper, aluminum foil, and flexible films. It is also used in extrusion coating applications where chill roll adhesion occurs under normal circumstances, and at very high line speeds featuring high chill roll temperatures and use of a glossy chill roll finish. verkürzen | |
| PTFE Wax Sunax PTFE204 | Yantai Suny Chem International Co., Ltd. | PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make th...weiterlesen PTFE Wax Sunax PTFE204 is a kind of PTFE wax. It has color white appearance, is ultra fine with evenly distributed particles, more delicate texture, and dispersed in good case for great scratch resistance properties. In coating application, it can make the product have a very low coefficient of friction, and provides excellent abrasion and scratch resistance. Its main role on coating is to improve the lubrication of the paint, as well as the abrasion and corrosion resistance. verkürzen | |
| Regalflex™ E1003 | Univar Solutions | Regalflex™ E1003 is a copolymer of propylene and ethylene, having a melt viscosity of 6000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1016PL-1 | Univar Solutions | Regalflex™ E1016PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. | Request Sample |
| Regalflex™ E1060 | Univar Solutions | Regalflex™ E1060 is a copolymer of propylene and ethylene, having a melt viscosity of 6000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1060PL | Univar Solutions | Regalflex™ E1060PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 5,700 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1060PL-1 | Univar Solutions | Regalflex™ E1060PL-1 is a copolymer of propylene and ethylene, pelletized and coated with a low-density polyethylene powder, having a melt viscosity of 6,000 mPa·s at 190°C. | Request Sample |
| Regalflex™ E1200PL | Univar Solutions | Regalflex™ E1200PL is a copolymer of propylene and ethylene, pelletized and coated with a polypropylene powder, having a melt viscosity of 17,000 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1018PL-1 | Univar Solutions | Regalflex™ M1018PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1025 | Univar Solutions | Regalflex™ M1025 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a polyethylene powder. The resulting blend has a melt viscosity of 1,800 mPa·s at 190°C. | Request Sample |
| Regalflex™ M1030PL-1 | Univar Solutions | Regalflex™ M1030PL-1 is a blend of propylene homopolymer and copolymers of propylene and ethylene, pelletized and coated with a low-density polyethylene powder. The resulting blend has a melt viscosity of 3,000 mPa·s at 190°C. | Request Sample |
| Rezimac® 73-7358 | Polynt Composites | Rezimac® 73-7358 is a water reducible modified polyolefin resin for penetrating stains on vertical wood surfaces, coatings that exhibit excellent application characteristics, HAPs-free. | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...weiterlesen SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. verkürzen | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...weiterlesen SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. verkürzen | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...weiterlesen SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. verkürzen | |
| Stirinol™ 350 A | Lawter | Stirinol™ 350 A is a coatable polyethylene and PTFE heatset compound to give good gloss retention, rub resistance and slip in heatset inks. It resists re-crystallization at ink-processing temperature. Stirinol™ 350 A is suitable for use in heatset inks. | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...weiterlesen Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. verkürzen | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...weiterlesen Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. verkürzen | |
| Ultrapoly™ 211 A | Lawter | Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects...weiterlesen Ultrapoly™ 211 A is a sheet-fed polyethylene and PTFE compound blend dispersed in a hard drying binder and is recommended in instances where heat resistance, abrasion and a high degree of slip are required. It is fast setting and non-volatile and protects film in the earliest phases of the printing process. Ultrapoly™ 211 A is suitable for use in sheet-fed offset inks and in UV, OPV inks. verkürzen | |
| Ultrapoly™ 213 A | Lawter | Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed ...weiterlesen Ultrapoly™ 213 A is a sheet-fed polyethylene and PTFE compound that is dispersed in a non-volatile, hard-drying binder. It boasts gloss retention and lubricity, with abrasion and mar resistance as added features. Ultrapoly™ 213 A can be used in sheet-fed and heatset inks, in UV and metal decorating inks. verkürzen | |
| Ultrapoly™ 215 A | Lawter | Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film ...weiterlesen Ultrapoly™ 215 A is a blend of sheet-fed polyethylene and PTFE compounds in instances where a high degree of lubricity is called for and where mar, heat and abrasion resistance are also necessary. It is fast-setting and non-volatile and protects the film in the earliest phase of the printing cycle. Ultrapoly™ 215 A can be used in sheet-fed offset inks and metal decorating inks. verkürzen | |
| Ultrapoly™ 2300 A | Lawter | Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip a...weiterlesen Ultrapoly™ 2300 A is a sheet-fed polyethylene compound with a soft body in a high performance blend of polyethylene which is dispersed in a hard-drying binder. It is useful in situations where mar and abrasion resistance, along with pumpability and slip are needed. The product is fast-setting and non-volatile and protects film in the earliest phase of printing while developing toughness over time. Ultrapoly™ 2300 A is considered ideal for use in sheet-fed offset inks and in UV and OPV metal decorating inks. verkürzen |
