| ACRIBEN RF 450 | Benasedo | ACRIBEN RF 450 is a low hydroxyl content binder suitable to be crosslinked both with aliphatic and aromatic isocyanates, when producing enamels for metals or for plastic substrates, to be cured at room temperature or in the oven. | |
| ACRIBEN SA 338 | Benasedo | ACRIBEN SA 338 is a self crosslinking acrylic polymer endowed with very good transparency, good chemical resistance, and non-yellowing properties. It is suitable to formulate fast drying clear and pigmented water based top-coats for furniture. | |
| ACRIBEN SA 437 | Benasedo | ACRIBEN SA 437 is a self crosslinking acrylic polymer. It is suitable to formulate fast drying clear and pigmented water based sealers for furniture. | |
| ACRIBEN SA 5302 | Benasedo | ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast...weiterlesen ACRIBEN SA 5302 is a self crosslinking acrylic polymer endowed with high blocking resistance, good early water resistance, good alkaline resistance, very good transparency, and non yellowing properties. It is suitable to formulate clear and pigmented fast drying and fast blocking resistant coatings for Joinery, suitable both for interior and exterior applications. verkürzen | |
| BENALAC 5660 | Benasedo | BENALAC 5660 is an air-dryng long-oil alkyd resin specially designed for “off-set inks”. It is endowed with good setting and drying characteristics, excellent wetting power, colour development and scuff resistance, flow and non- yellowing properties. | |
| BENALAC UR 81 | Benasedo | BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance....weiterlesen BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance. Due to its excellent pigments wetting properties is particularly suitable as grinding vehicle. It is also suitable for interior and exterior clear varnishes and for wood stains in compliance with CE 2004 – 42 requirements for the VOC reduction. verkürzen | |
| Benasol 1804 | Benasedo | Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to mari...weiterlesen Benasol 1804 is a Linseed - Tung Phenolic oil, with a 68% oil content. It contains 70% solids, Z1-Z2 visc. [G.H], 6-12 A.V. solids, and a 9 color [G.H.] max. It is used in anticorrosive primers, enamels and clear finishes with excellent resistance to marine corrosion. verkürzen | |
| BENASOL 4377 | Benasedo | BENASOL 4377 is a low viscosity, plasticizing, non yellowing alkyd resin suitable to produce nitrocellulose wood lacquers, endowed with very fast solvent release, high build-up flow, gloss and lifting resistance. | |
| Benasol 4V | Benasedo | Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment. | |
| Benasol 5097 in White Spirit | Benasedo | Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of...weiterlesen Benasol 5097 in White Spirit is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. It is made from Linseed - Tung Phenolic oil and has an oil content of 42%. This product contains 50% solids, a viscosity [G.H.] of X-Z, an A.V. solids amount of 6-15, and a color [G.H] max. of 9. Its application is for air. verkürzen | |
| Benasol 5097 in Xylene | Benasedo | Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its applic...weiterlesen Benasol 5097 in Xylene is used in quick air-drying primers and enamels with excellent chemical and outdoor resistance. This product has an oil content of 42%, a solids amount of 50%, an A.V. solids amount of 6-15, and a viscosity [G.H.] of U-W. Its application is for air. verkürzen | |
| BENASOL A 240 | Benasedo | BENASOL A 240 is a very fast curing binder suitable for two pack wood lacquers, sealers and top coats, where it shows good sandability hardness and filling properties. It has excellent lifting resistance and good compatibility with nitrocellulose. | |
| Benasol AS 280 | Benasedo | Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H...weiterlesen Benasol AS 280 is used in fast air-drying and low-bake enamels with excellent chemical resistance. It is made from soya oil and has a 28% oil content. It contains 60% solids, has a viscosity [G.H.] of Y-Z1, an A.V. solids amount of 6-15, and a colour [G.H.] maximum of 5. This product has applications for air, bake, nitro and catalyze. verkürzen | |
| BENASOL AS 308 in XYLENE | Benasedo | BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlor...weiterlesen BENASOL AS 308 in XYLENE is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | |
| BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) | Benasedo | BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in ...weiterlesen BENASOL AS 308 in XYLENE /WHITE SPIRIT (30/15) is a medium-oil non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce enamels for building and industrial applications, also in combination with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | |
| BENASOL AS 3716 | Benasedo | BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...weiterlesen BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. verkürzen | |
| Benasol AS 379 | Benasedo | Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12,...weiterlesen Benasol AS 379 is used in fast air-drying white and coloured enamels for industrial applications. It is made from special fatty acids with 43% oil content and 60% solids content. This product has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-12, and a color [G.H.] maximum of 5. It has application for air. verkürzen | |
| BENASOL AS 452 | Benasedo | BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| BENASOL AS 453 | Benasedo | BENASOL AS 453 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations. | |
| Benasol B1 | Benasedo | Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has ...weiterlesen Benasol B1 is used in urethane two-component mat finishes and sealers with high reactivity and easy sandability, and it has nitro and catalyze applications. This product contains vegetable fatty acids, with 30% oil content and a 50% solids amount. It has a viscosity [G.H.] of X-Y, an A.V. solids amount of 6-15, a color [G.H.] max. of 5, and an OH solids of 2.6-2.8%. verkürzen | |
| Benasol C 300 | Benasedo | Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of...weiterlesen Benasol C 300 is used in non-yellowing baking enamels, polyurethane finishes and nitrocellulose lacquers. It contains coconut fatty acids, with a 33% oil content. This product has a 60% solids content, a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, and an OH solids of 2.8-3.0%. Benasol C 300 has bake, nitro and catalyze applications. verkürzen | |
| BENASOL CO 34 | Benasedo | BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol ena...weiterlesen BENASOL CO 34 is an alkyd resin with a particular molecular structure,endowed with very fast drying properties, good performances in adhesion,hardness and through-dry. It is suggested to formulate industrial sealer and finishes, i.e. machinery,aerosol enamels,traffic-paints. verkürzen | |
| Benasol CO 35 in Xylene | Benasedo | Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6...weiterlesen Benasol CO 35 in Xylene is used in very fast air-drying enamels for industrial applications and traffic-paints. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z4, a 60% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 8. This product has air applications. verkürzen | |
| Benasol CO 35 in Xylene/Butylacetate | Benasedo | Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65...weiterlesen Benasol CO 35 in Xylene/Butylacetate is used in very fast air-drying enamels for industrial applications and traffic-paints, and also has air applications. It is made using soya fatty acids, with a 44% oil content. It has a viscosity [G.H.] of Z2-Z3, a 65% solids amount, an A.V. solids content of 6-15, and a colour [G.H.] of maximum 4. verkürzen | |
| Benasol CO 37 in BUTYL ACETATE | Benasedo | Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% ...weiterlesen Benasol CO 37 in BUTYL ACETATE is used in very fast non-yellowing air-drying enamels for exterior applications, particularly farm equipment. It is made using special fatty acids and Urethane Aliphatic, and has a 37% oil content. This product contains 65% solids, a viscosity [G.H.] of Z1-Z2, an A.V. solids content of 5-12, and a color [G.H.] maximum of 4. This product has air applications. verkürzen | |
| Benasol E 114 | Benasedo | Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This ...weiterlesen Benasol E 114 is used in clear and pigmented finishes for metals and wood. It has a large compatibility with acrylics, polyesters, alkyds, film-forming vehicles and universal tinting-systems. It contains synthetic fatty acids, with a 25% oil amount. This product has a viscosity [G.H.] of Z3-Z5, a colour max. of 3, an OH solids amount of 5.4-5.6, and solids amount of 75%. Benasol E 114 has bake, nitro, and catalyze applications. verkürzen | |
| Benasol E 184 | Benasedo | Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocell...weiterlesen Benasol E 184 is made using synthetic fatty acids, with an oil content of 28% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3, an OH solids amount of 2.3-2.5, and a colour [G.H.] maximum of 3. It is used in non-yellowing nitrocellulose lacquers for automotive finishes, bake and two-component polyurethane enamels. Benasol E 184 has bake, nitro and catalyze applications. verkürzen | |
| Benasol F 71 | Benasedo | Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. T...weiterlesen Benasol F 71 is used in two-component polyurethane gloss or mat finishes and sealers endowed with high transparence, and has catalyze applications. This product is made using hydrogenated castor oil and vegetable fatty acids, with an oil content of 41%. This product has an OH solids amount of 4.4-4.6, an A.V. solids level of 15-20, a colour [G.H.] maximum of 4, and a viscosity of Z1-Z2. verkürzen | |
| Benasol F 73 | Benasedo | Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. soli...weiterlesen Benasol F 73 is used in high-quality clear and pigmented polyurethane finishes for wood, and has catalyze applications. It uses hydrogenated castor oil, with a 43% oil and 60% solids content. This product has a 4.5-4.7% OH solids amount, a 15-23 A.V. solids level, and a Y-Z viscosity [G.H.]. verkürzen | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and dryin...weiterlesen BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. verkürzen | |
| BENASOL FL 40 | Benasedo | BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for seale...weiterlesen BENASOL FL 40 is a non yellowing, slightly thixotropic high-molecular weight alkyd resin, endowed with very good flow, fast drying and wide compatibility with medium-long-oil alkyd resins. In combination with medium-oil alkyd resins, is suitable for sealers, matt and semi-glossy paints employed in building and costruction industries endowed with good outdoor resistance properties. verkürzen | |
| Benasol FX 97 | Benasedo | Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as...weiterlesen Benasol FX 97 is a new Alkyd Resin with 98% solid content, which allows the formulators to stay below the requested limits. Benasol FX 97 is easy to apply by brush and widely compatible with different types of resins; due to its properties, can be used as grinding vehicle and can be completed with a wide range of Long Oil Alkyd Resins. It is also suggested to improve gloss and build-up of conventional paints. verkürzen | |
| Benasol FX66 | Benasedo | Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with ...weiterlesen Benasol FX66 is used in high performance non-yellowing paints for interior and exterior, for building industry and "do-it-yourself". It provides very good colour retention, and has air applications. This product uses special unsaturated fatty acids, with a 67% oil and 70% solids content. This product has a colour [G.H.] maximum of 3, an A.V. solids amount of 6-10, and a viscosity [G.H.] of Z1-Z2. verkürzen | |
| BENASOL GEL 220 | Benasedo | BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes ...weiterlesen BENASOL GEL 220 is a soft-gel fast drying thixotropic alkyd resin, endowed with very good flow , body and color ritention. It is employed alone or combined with medium-long oil alkyd resins to formulate enamels, glossy paints, flat one-coat wall finishes or pigmented sealers for wood and “do it Your self”, applied by brush or roller. verkürzen | |
| BENASOL HS 120 | Benasedo | BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compat...weiterlesen BENASOL HS 120 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. verkürzen | |
| BENASOL HS 6922 | Benasedo | BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...weiterlesen BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. verkürzen | |
| BENASOL HS 7100 | Benasedo | BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...weiterlesen BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. verkürzen | |
| BENASOL HS 7380 | Benasedo | BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and f...weiterlesen BENASOL HS 7380 is a non yellowing alkyd resin with a particular molecular structure, endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance in compliance with the CE 2004 – 42 requirements for the VOC reduction . verkürzen | |
| BENASOL HS 75 | Benasedo | BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured a...weiterlesen BENASOL HS 75 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness and ease of brush application. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. verkürzen | |
| BENASOL HS 753 | Benasedo | BENASOL HS 753 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| Benasol HS 754 | Benasedo | Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. | |
| BENASOL HS 86 | Benasedo | BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ai...weiterlesen BENASOL HS 86 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. verkürzen | |
| BENASOL L 50 AV | Benasedo | BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...weiterlesen BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. verkürzen | |
| BENASOL L 65 | Benasedo | BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented p...weiterlesen BENASOL L 65 is a long oil, low viscosity alkyd resin,endowed with a very good,trough dryng properties also in thick film, gloss and color retention, hardness,built and brushability. It is suggested for formulating sinthetic enamels, clear and pigmented paints for “ Do it Yourself “ and maintenance, alone or combined with oils urethane modified binders. verkürzen | |
| Benasol R 126 | Benasedo | Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G....weiterlesen Benasol R 126 is used in polyurethane clear finishes and lacquers for wood and metals, with nitro and catalyze applications. It is made using castor oil, with a 53% oil and 60% solids content. This product has an OH solids amount of 5.4-5.6%, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. verkürzen | |
| Benasol R 127 | Benasedo | Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2...weiterlesen Benasol R 127 is used in polyurethane high build-up clear finishes and lacquers endowed with good adhesion and flexibility for metals and wood. It is made using castor oil, with a 59% oil and 60% solids content. This product has an OH solids amount of 5.2-5.4%, a colour [G.H.] maximum of 5, a viscosity [G.H.] of W-Y, and an A.V. solids level of 6-15. Benasol R 127 has catalyze and nitro applications. verkürzen | |
| BENASOL R 40 D | Benasedo | BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to...weiterlesen BENASOL R 40 D is an alkyd resin having good properties of adhesion and flexibility, gloss and colour retention, build – up and flow. It is suitable to produce low temperature bake enamels crosslinked with amino resins. BENASOL R 40 D is also suggested to formulate clear and pigmented acid- curing coatings and nitrocellulose lacquers. verkürzen | |
| Benasol RC 45 | Benasedo | Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids...weiterlesen Benasol RC 45 is used in polyurethane sealers and mat finishes for wood as well as for nitrocellulose lacquers, and can be used in bake, nitro and catalyze applications. This product uses castor and vegetable fatty acids oil, with a 41% oil and 60% solids content. Benasol RC 45 as a viscosity [G.H.] of Z1-Z3, an A.V. solids amount of 6-15, and an OH solids level of 4.2-4.4%. verkürzen | |
| Benasol RC 75 | Benasedo | Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids...weiterlesen Benasol RC 75 is used in high-gloss polyurethane finishes and vehicles to improve the general performances of wood systems, with nitro and catalyze applications. It uses castor oil type, with a 78% oil and 80% solids content. This product has an OH solids amount of 5.8-6.0%, an A.V. solids amount of 6-10, a colour [G.H.] maximum 5, and a viscosity [G.H.] of X-Y. verkürzen | |
| Benasol RT 43 | Benasedo | Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and ...weiterlesen Benasol RT 43 is a vehicle to be used alone or combined with other Benasol for polyurethane sealers or mat finishes. It is endowed with high-body and fast drying, and has catalyze applications. This product contains castor and Talloil, with a 43% oil and 60% solids amount. It has a viscosity [G.H.] of Z1-Z2, an A.V. solids amount of 6-15, a color [ G.H.] maximum of 6, and an OH solids levle of 4.0-4.2%. verkürzen | |
| BENASOL S 50 | Benasedo | BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...weiterlesen BENASOL S 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. verkürzen | |
| BENASOL S 60 | Benasedo | BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades...weiterlesen BENASOL S 60 s an air - drying alkyd resin showing high wetting power and large compatibility with pigments; it provides good gloss and flow, colour retention, exterior durability and excellent brushability. It is suitable for making white or light shades architectural enamels for interior and exterior, as well as for marine paints. verkürzen | |
| BENASOL SI 25 | Benasedo | BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and p...weiterlesen BENASOL SI 25 is a hydroxylated non–drying alkid resin for two components polyurethane topcoats endowed with excellent hardeness, build-up, solvent resistance and very good hadesion and flexibility. It is particularly suggested for formulating clear and pigmented topcoats for wood forniture with high characteristics of mar resistance and high glossy also after polishing , applied in very fast curing cycle by courtain coating or spray. verkürzen | |
| BENASOL SI 32 | Benasedo | BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy t...weiterlesen BENASOL SI 32 is an hydroxylated alkyd resin, endowed with good build–up, easy sandability, high reactivity and good chemical resistances. It is suggested for formulating fast drying glossy two components topcoats both for spray or curtain coating, easy to be polished and piled in a very short time. It’s especially recommended for wood coating applications verkürzen | |
| BENASOL SI 83 | Benasedo | BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compati...weiterlesen BENASOL SI 83 is an air – dryng, non yellowing, long-oil alkyd resin with a particular molecular structure, endowed with fast air drying, good gloss, colour retention, good flow and superficial hardness. It’s easy to apply by brush and it’s widely compatible with different types of resins, showing excellent wetting properties. Due to its properties, it can be used as grinding vehicle and to produce tinting pastes. It is also suggested to improve gloss and build-up of conventional paints. verkürzen | |
| Benasol T 35 | Benasedo | Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids leve...weiterlesen Benasol T 35 is used in general industrial baking enamels and hammer bake coatings, and it has nitro and bake applications. This product uses Talloil, with a 35% oil and 50% solids content. This product has a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 6-15, and an OH solids amount of 4.5-4.7%. verkürzen | |
| Benasol T 68 | Benasedo | Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an ...weiterlesen Benasol T 68 is used in high-solids enamels for building industry and in clear finishes and impregnating vehicles for wood, and has air applications. This product uses Talloil, with a 68% oil and 75% solids amount. It has a colour [G.H.] maximum of 9, an A.V. solids level of 6-15, and a viscosity [G.H.] of Z-Z1. verkürzen | |
| Benasol UR 4984 | Benasedo | Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This pr...weiterlesen Benasol UR 4984 is used in non-yellowing clear and pigmented coatings with excellent properties of through-dry, hardness, adhesion, chemical and marine resistance as well as in premium quality finishes for yachts and "do-it-yourself" applications. This product uses Safflower oil, with a 65% oil content. It has a modification of Aliphatic isocyanate and a white spirit solvent. Benasol UR 4984 has a solids content of 60%, a viscosity [G.H.] of Z1-Z3, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 4. verkürzen | |
| Benasol UR 59 in XILENE | Benasedo | Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocyn...weiterlesen Benasol UR 59 in XILENE is used in one-component sanding sealers and fast-drying mat finishes for wooden frames. It is compatible with nitrocellulose and vinyl copolymers. This product contains vegetable oil, with a 56% oil content. It has aromatic isocynate modification and Xylene solvent, with a 50% solids content. Benasol UR 59 in XILENE has a viscosity [G.H.] of Z2-Z4, a colour [G.H.] maximum of 6, and an A.V. solids level of 1-3. verkürzen | |
| Benasol UR 59 WHITE SPIRIT AROMATIC FREE | Benasedo | Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and w...weiterlesen Benasol UR 59 WHITE SPIRIT AROMATIC FREE is used in one-component air-drying glossy and flat finishes, suggested for floors, window and door frames. This product uses vegetable oils, with a 58% oil content. It has an Aromatic isocyanate modification and white spirit solvent. Benasol UR 59 WS has a solids content of 50%, a viscosity [G.H.] of Z2-Z4, an A.V. solids level of 1-3, and a colour [G.H.] maximum of 6. verkürzen | |
| Benasol UR 60 | Benasedo | Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aroma...weiterlesen Benasol UR 60 is used in one-component fast-drying clear varnishes with good resistance to industrial and marine environment as well as in coatings for floors, wooden frames and "do-it-yourself" applications. This product uses vegetable oils, has an aromatic isocyanate modification and Xylene solvent, with a 65% oil and 60% solids content. Benasol UR 60 has an A.V. solids content of 1-3, a viscosity [G.H.] of Z2-Z4, and a colour [G.H.] maximum of 6. verkürzen | |
| BENASOL UR 6005 | Benasedo | BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for...weiterlesen BENASOL UR 6005 is an air - drying, non yellowing, oil, modified with aliphatic isocyanate, endowed with very good colour and gloss retention, hardness, flexibility, flow and easy brushability. It is suggested to formulate clear and pigmented finishes for interior and exterior, when good weatherability and chemical or marine resistance are required, as for yachting paints. verkürzen | |
| BENASOL UR 61 | Benasedo | BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is ...weiterlesen BENASOL UR 61 is a fast air drying alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is suggested for clear and pigmented finishes, easy to be applied by brush and showing good exterior durability, high gloss, flow and drying. verkürzen | |
| Benasol UR 64 | Benasedo | Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil...weiterlesen Benasol UR 64 is an alkyd-urethane resin endowed with outdoor resistance, suggested to formulate clear or pigmented finishes for wood and metals. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 61% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 1-3, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of X-Y. verkürzen | |
| Benasol UR 65 | Benasedo | Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids cont...weiterlesen Benasol UR 65 is used in non-yellowing varnishes and paints endowed with high-gloss retention, hardness and chalk-resistance. It uses soya fatty acids, has an Aliphatic isocyanate modification and a white spirit solvent, with a 58% oil and 55% solids content. Benasol UR 64 has an A.V. solids level of 2-6, a colour [G.H.] maximum of 5, and a viscosity [G.H.] of Z1-Z3. verkürzen | |
| BENASOL UR 85 | Benasedo | BENASOL UR 85 is a high solid urethane modified alkyd resin with very good exterior resistance, color and gloss retention. It is suggested for clear and pigmented topcoats, both for glossy and, especially, matt products. | |
| BENCRYL PU 137 | Benasedo | BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BENCRYL PU 139 | Benasedo | BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is...weiterlesen BENCRYL PU 139 is an acrili oligomer, with a urethane aromatic modification, with good hardness and flexibility. It is indicated for paper, wood and plastic substrates, where adhesion and, especially, abrasion resi stance are requested. BENCRYL PU 139 is curable thorugh EB or UV radiations, when used in combination with photoinitiators. verkürzen | |
| BENCRYL PU 141 | Benasedo | BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition o...weiterlesen BENCRYL PU 141 is a non-yellowing aliphatic urethane acrylated oligomer. It is suggested for formulating enamels for wood, plastic and paper endowed with good flexibility, very good abrasion and chemical resistances. UV curing is achived by the addition of photoinitiators whit small amounts of photoactivator (acrylated amine) verkürzen | |
| BENCRYL PU 1515 | Benasedo | BENCRYL PU 1515 is a linear aromatic urethane acrylated oligomer endowed with good flexibility, very good chemicals resistances, hardness and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings. | |
| BENDA-LUTZ® 10082 | Benda-Lutz | BENDA-LUTZ® 10082 is a leafing aluminum paste. BENDA-LUTZ® 10082 has an average particle size of 10 and a metal content of 66. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...weiterlesen BENDA-LUTZ® 10082 is a leafing aluminum paste. BENDA-LUTZ® 10082 has an average particle size of 10 and a metal content of 66. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 10082 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. verkürzen | |
| BENDA-LUTZ® 1014 | Benda-Lutz | BENDA-LUTZ® 1014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1014 has an average particle size of 55 and a metal content of 70. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1014 has an average particle size of 55 and a metal content of 70. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1014 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1031 | Benda-Lutz | BENDA-LUTZ® 1031 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1031 has an average particle size of 23 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1031 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1031 has an average particle size of 23 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1031 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1041 | Benda-Lutz | BENDA-LUTZ® 1041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1041 has an average particle size of 18 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1041 has an average particle size of 18 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1041 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1051 | Benda-Lutz | BENDA-LUTZ® 1051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1051 has an average particle size of 16 and a metal content of 66. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1051 has an average particle size of 16 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1051 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1081 | Benda-Lutz | BENDA-LUTZ® 1081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1081 has an average particle size of 9 and a metal content of 66. The accumulation of aluminum pigment is designed to protect ...weiterlesen BENDA-LUTZ® 1081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1081 has an average particle size of 9 and a metal content of 66. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1081 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 12062 | Benda-Lutz | BENDA-LUTZ® 12062 is a leafing aluminum paste. BENDA-LUTZ® 12062 has an average particle size of 14 and a metal content of 73. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...weiterlesen BENDA-LUTZ® 12062 is a leafing aluminum paste. BENDA-LUTZ® 12062 has an average particle size of 14 and a metal content of 73. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 12062 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. verkürzen | |
| BENDA-LUTZ® 12082 | Benda-Lutz | BENDA-LUTZ® 12082 is a leafing aluminum paste. BENDA-LUTZ® 12082 has an average particle size of 10 and a metal content of 60. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired...weiterlesen BENDA-LUTZ® 12082 is a leafing aluminum paste. BENDA-LUTZ® 12082 has an average particle size of 10 and a metal content of 60. It is branded as high performance and intended to be used in situations where brightness, opacity, and chrome optics are desired to be high quality. BENDA-LUTZ® 12082 is used in printing inks, aerosols, high heat resistance paints, and chrome effect paints. verkürzen | |
| BENDA-LUTZ® 1214 | Benda-Lutz | BENDA-LUTZ® 1214 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1214 has an average particle size of 55 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1214 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1214 has an average particle size of 55 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1214 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1241 | Benda-Lutz | BENDA-LUTZ® 1241 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1241 has an average particle size of 23 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1241 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1241 has an average particle size of 23 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1241 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1251 | Benda-Lutz | BENDA-LUTZ® 1251 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1251 has an average particle size of 15 and a metal content of 73. The accumulation of aluminum pigment is designed to protect...weiterlesen BENDA-LUTZ® 1251 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1251 has an average particle size of 15 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1251 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 1281 | Benda-Lutz | BENDA-LUTZ® 1281 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1281 has an average particle size of 9 and a metal content of 73. The accumulation of aluminum pigment is designed to protect ...weiterlesen BENDA-LUTZ® 1281 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 1281 has an average particle size of 9 and a metal content of 73. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 1281 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 20082 UV | Benda-Lutz | BENDA-LUTZ® 20082 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20082 UV has an average particle size of 10. This product is intended to be used for UV-curable offset in...weiterlesen BENDA-LUTZ® 20082 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20082 UV has an average particle size of 10. This product is intended to be used for UV-curable offset inks, UV-curable rotogravure and flexographic inks, and UV-curable paints and coatings. verkürzen | |
| BENDA-LUTZ® 20092 UV | Benda-Lutz | BENDA-LUTZ® 20092 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20092 UV has an average particle size of 5. This product is intended to be used for UV-curable offset ink...weiterlesen BENDA-LUTZ® 20092 UV is an aluminum pigment powder intended to stabilize one-component UV paints and inks to allow them to be UV-curable. BENDA-LUTZ® 20092 UV has an average particle size of 5. This product is intended to be used for UV-curable offset inks, UV-curable rotogravure and flexographic inks, and UV-curable paints and coatings. verkürzen | |
| BENDA-LUTZ® 2014 | Benda-Lutz | BENDA-LUTZ® 2014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2014 has an average particle size of 55. The accumulation of aluminum pigment is designed to protect the paint film against al...weiterlesen BENDA-LUTZ® 2014 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2014 has an average particle size of 55. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2014 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 2041 | Benda-Lutz | BENDA-LUTZ® 2041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2041 has an average particle size of 23. The accumulation of aluminum pigment is designed to protect the paint film against al...weiterlesen BENDA-LUTZ® 2041 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2041 has an average particle size of 23. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2041 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 2051 | Benda-Lutz | BENDA-LUTZ® 2051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2051 has an average particle size of 15. The accumulation of aluminum pigment is designed to protect the paint film against al...weiterlesen BENDA-LUTZ® 2051 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2051 has an average particle size of 15. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2051 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 2081 | Benda-Lutz | BENDA-LUTZ® 2081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081 has an average particle size of 9. The accumulation of aluminum pigment is designed to protect the paint film against alt...weiterlesen BENDA-LUTZ® 2081 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081 has an average particle size of 9. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2081 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 2081FS | Benda-Lutz | BENDA-LUTZ® 2081FS is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081FS has an average particle size of 8. The accumulation of aluminum pigment is designed to protect the paint film against...weiterlesen BENDA-LUTZ® 2081FS is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2081FS has an average particle size of 8. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2081FS is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 2091 | Benda-Lutz | BENDA-LUTZ® 2091 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2091 has an average particle size of 5. The accumulation of aluminum pigment is designed to protect the paint film against alt...weiterlesen BENDA-LUTZ® 2091 is an aluminum leafing pigment with a high surface tension that migrates to the paint film surface. BENDA-LUTZ® 2091 has an average particle size of 5. The accumulation of aluminum pigment is designed to protect the paint film against alteration, UV rays, abrasion and corrosion while also creating a reflective metal layer that can appear mirror-like. BENDA-LUTZ® 2091 is used in corrosion paints, reflection paints, ship paints, roof coatings, heat and high-heat resistant paints, chrome effect paints, and aerosols. verkürzen | |
| BENDA-LUTZ® 3030 | Benda-Lutz | BENDA-LUTZ® 3030 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3030 has an average particle size of 19. This product is ...weiterlesen BENDA-LUTZ® 3030 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3030 has an average particle size of 19. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. verkürzen | |
| BENDA-LUTZ® 3041 | Benda-Lutz | BENDA-LUTZ® 3041 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3041 has an average particle size of 23. This product is ...weiterlesen BENDA-LUTZ® 3041 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3041 has an average particle size of 23. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. verkürzen | |
| BENDA-LUTZ® 3051 | Benda-Lutz | BENDA-LUTZ® 3051 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3051 has an average particle size of 15. This product is ...weiterlesen BENDA-LUTZ® 3051 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3051 has an average particle size of 15. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. verkürzen | |
| BENDA-LUTZ® 3081 | Benda-Lutz | BENDA-LUTZ® 3081 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3081 has an average particle size of 9. This product is i...weiterlesen BENDA-LUTZ® 3081 is a non-dusting aluminum powder. It is embedded in a matrix built by maximum .2% of a micro-net forming chemically inert additive designed to minimize easy dispersion. BENDA-LUTZ® 3081 has an average particle size of 9. This product is intended for use in 2-component epoxy coating solvent-free, floor coating systems, and corrosion protection paints. verkürzen | |
| BENDA-LUTZ® 6000 | Benda-Lutz | BENDA-LUTZ® 6000 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6000 is intended for use in printing inks conta...weiterlesen BENDA-LUTZ® 6000 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6000 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. verkürzen | |
| BENDA-LUTZ® 6001 | Benda-Lutz | BENDA-LUTZ® 6001 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6001 is intended for use in printing inks conta...weiterlesen BENDA-LUTZ® 6001 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6001 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. verkürzen | |
| BENDA-LUTZ® 6002 | Benda-Lutz | BENDA-LUTZ® 6002 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6002 is intended for use in printing inks conta...weiterlesen BENDA-LUTZ® 6002 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6002 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. verkürzen | |
| BENDA-LUTZ® 6003 | Benda-Lutz | BENDA-LUTZ® 6003 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6003 is intended for use in printing inks conta...weiterlesen BENDA-LUTZ® 6003 is an aluminum-pigment suspension, manufactured by vacuum evaporation of aluminum. The product's smooth surface enables chrome-effects to achieved without metalizing the objects. BENDA-LUTZ® 6003 is intended for use in printing inks containing solvents and those diluted in water: rotogravure, flexographic and screen printing. It is also intended for use in coatings containing solvents and those diluted in water: wheel rim lacquering, reflectors, auto accessories, kitchen and furniture handles, sport and leisure equipment, exclusive household devices, and decorative stones. verkürzen | |
| BENDA-LUTZ® 6031 | Benda-Lutz | BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 6...weiterlesen BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. verkürzen | |
| BENDA-LUTZ® 6040 TB/SN | Benda-Lutz | BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primaril...weiterlesen BENDA-LUTZ® 6040 TB/SN is a non-leafing aluminum pigment. The TB/SN stands for Testbenzin/Solventnaphtha which is the solvent used in this product. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6040 TB/SN has an average particle size of 20 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. verkürzen |
