| EPOSOL AP 100 | Benasedo | EPOSOL AP 100 is a special additive improving the adhesion and the elasticity in baking enamel for metal substrates. It is stable in colour and doesn’t have any influence on weather resistance properties of the paints. | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g....weiterlesen Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". verkürzen | |
| Hartben 405 | Benasedo | Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...weiterlesen Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. verkürzen | |
| Hartben 75 PS-T | Benasedo | Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75...weiterlesen Hartben 75 P/ST is an aromatic polyisocianate adduct endowed with high body, brightness and flexibility. It is suggested, alone or combined with other polyisocianate polymers, as crosslinker for hydroxylated binders in two – components systems. Hartben 75 P/ST allows to produce sealers and finishes for furniture, floors and metals, when a good yellowing resistance is not particularly requested. verkürzen | |
| Hartben A 75 | Benasedo | Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This pro...weiterlesen Hartben A 75 is used in two-component non-yellowing clear or pigmented finishes for wood and metals. It has high mechanical performance and durability. It is an Aliphatic polyisocyanurate, with a Xylene / M.P.A. solvent, and a 75% solids content. This product has a viscosity of D-I, a free monomer of < 0.5%, and NCO of 14.5-16.5, and a colour [G.H.] maximum of 1. verkürzen | |
| Hartben AM 29 | Benasedo | Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethan...weiterlesen Hartben AM 29 is an Aliphatic-aromatic polyisocyanurate, with a butyl acetate solvent, and 60% solids. It has a free monomer of < 0.5%, an NCO of 10.4-10.8%, a colour [G.H.] maximum of 3, and a viscosity [G.H.] of O-R. Hartben AM 29 is used in polyurethane coatings with good colour retention, gloss, toughness and hardness. It is recommended for metals and wood. verkürzen | |
| Hartben E 23 | Benasedo | Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast...weiterlesen Hartben E 23 is an Aromatic polyisocyanurate, with a butyl aacetate solvent, and a 50% solids content. This product has an NCO of 7.8-8.2%, a viscosity [G.H.] of H-J, a colour [G.H.] maximum of 2, and a free monomer of < 0.5%. Hartben E 23 is used in fast-curing two-component sealers and finishes, by spray or curtain coating machine application, with good "pot-life" and lifting resistance. It has a wide compatibility with nitrocellulose. verkürzen | |
| Hartben MC 53 | Benasedo | Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G....weiterlesen Hartben MC 53 is used in one-pack glossy and mat lacquers for parquets and concrete floors. This product is a moisture-curing aromatic prepolymer, with a Xylene/M.P.A. solvent and a 60% solids level. This product as a viscosity [G.H.] of K-O, a colour [G.H.] maximum of 3, an NCO of 6.0-6.5%, and a free monomer of 1% maximum. verkürzen | |
| Hartben SV 100 | Benasedo | Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of ...weiterlesen Hartben SV 100 is used in very fast-curing sealers with easy hand or mechanical sandability or plasticizing by adding Hartben 75 P/ST. This product is an Aliphatic polyisocyanurate, and contains 100% solids. It has an NCO of 21.5-22.0%, a free monomer of < 0.3%, a color [G.H.] maximum of 1, and a viscosity [G.H.] of Z-Z3. verkürzen | |
| Hydroxypropyl Aistarch Phosphate | Beijing Entrepreneur Science &Trading Co., Ltd. | Hydroxypropyl Aistarch Phosphate is a fine white to off white powder with a characteristic odor. This product has good cutting resistance, good acid and alkali resistance, and high viscosity. It is used it as thickening agent in wallpaper adhesive. | |
| Idroben 130 | Benasedo | Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH l...weiterlesen Idroben 130 is used in industrial air-drying or bake enamels for tinting paste vehicles. IT has bake and catalyze applications. This product is made of drying fatty acids, is solvent in water, and has a 20% oil content. It has a white milky colour, a pH level of 6.5-7.5, and a viscosity [Brookf.] m Pa.s of 3000. verkürzen | |
| Idroben 178 | Benasedo | Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 3...weiterlesen Idroben 178 is used in very fast air-drying industrial finishes endowed with good mechanical characteristics. It has air and bake applications. It is an alkyd dispersion and contains special fatty acids, it is solvent in water, and has an oil content of 33%. This product has a viscosity [Brookf.] m Pa.s of 700-1300, a pH level of 7.3-7.8, and a white milky colour. verkürzen | |
| Idroben 180 | Benasedo | Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a w...weiterlesen Idroben 180 is used in industrial anticorrosive primers and fast drying finishes with good adhesion and mechanical characteristics. This product is an alkyd dispersion, contains drying fatty acids, is solvent in water, and has a 20% oil content. It is a white milky colour, has a pH level of 7.0-8.0, a solids content of 44%, and a viscosity [Brookf.] m Pa.s of 700-1000. verkürzen | |
| Idroben 201 | Benasedo | Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains ...weiterlesen Idroben 201 is used in film-forming resins, that are very fast-drying, suggested for flexible sealers and finishes for wood, metals and plastics. No coalescent is required. It is a poliurethane dispersion and contains water solvent. This product contains 35% solids, has a viscosity [Brookf.] m Pa.s of 50-70, and has a pH level of 7.0=8.0. This product has bake and air applications. verkürzen | |
| Idroben 202 | Benasedo | Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% sol...weiterlesen Idroben 202 is used in film-forming resins for sanding sealers and finishes for wood, metals and plastics. It has air and bake applications and no coalescent is required. This product is a poliurethane acrylic dispersion with a water solvent and a 37% solids content. It has a viscosity [Brookf.] m Pa.s of 50-70, and a pH level of 7.0-8.0. verkürzen | |
| IDROBEN 2026 | Benasedo | IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle f...weiterlesen IDROBEN 2026 is a water-borne, non-yellowing saturated polyester, endowed with very good properties of reactivity, flexibility, build-up and adhesion. It is suggested, combined with amino-resins in oven industrial applications(130°C – 180°C), as vehicle for primers and top-coats, when high mechanical properties are required, like the in can-coating field. verkürzen | |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...weiterlesen Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. verkürzen | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| IDROBEN 3519 | Benasedo | IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube...weiterlesen IDROBEN 3519 is a saturated polyester resin, water dilutable when neutralized with amines, endowed with very good properties of high build-up, gloss value, flow and hardness. It is suggested for oven industrial applications as vehicle for collapsible tube and can enamels. verkürzen | |
| Idroben 4705 | Benasedo | Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with ...weiterlesen Idroben 4705 is a high – solids, non-yellowing water-dilutable alkyd,endowed with good mechanical characteristics and gloss retention. It allows wide industrial applications, like air – drying primers and finishes or bake – coatings when crosslinked with amino - resins. verkürzen | |
| Idroben 4913 | Benasedo | Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This produ...weiterlesen Idroben 4913 is an acrylic emulsion used for clear and pigmented systems for indoor and outdoor, endowed with high body and glossy, particularly suggested for wood stains with good impregnating characteristics. It has air and bake applications. This product is an oil modified acrylic emulsion. It is a milky white colour, contains a solvent of water and butyl glycol, and has a 42% solids amount. Idroben 4913 has a pH level of 8,0-8.5, a viscosity [Brookf.] m Pa.s of < 250, and an MFT of 0℃. verkürzen | |
| Idroben 827 | Benasedo | Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying...weiterlesen Idroben 827 is a fast air-drying, non-yellowing alkyd resin, water-dilutable when neutralized, endowed with good mechanical properties and gloss retention. It is suggested for formulating primers and topcoats for industrial equipments, applied by spraying or dipping. verkürzen | |
| Idroben 828 | Benasedo | Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids ...weiterlesen Idroben 828 is used in non-yellowing, air-drying or baking enamels with high mechanical performance for stoving undercoats and primers. It has air and bake applications. This product is an alkyd special fatty acid, with a 30% oil content and a 75% solids amount. Idroben 828 has a viscosity [G.H.] of Z4-Z6, an A.V. solids content of 37-44, and a colour [G.H.] maximum of 3. verkürzen | |
| Idroben 878 | Benasedo | Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (6...weiterlesen Idroben 878 is used in baking-curing primers or finishes with high characteristics of adhesion, flow and hardness. It is epoxy ester drying fatty acids, with an oil content of 48% and a solids amount of 70%. This product has a viscosity [G.H.] of Z1-Z3 (60%) BG, a colour [G.H.] maximum, and an A.V. solids amount of 45-55. This product has bake applications. verkürzen | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Idroben EP 5595 | Benasedo | Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. Thi...weiterlesen Idroben EP 5595 is an epoxy ester, acryl modified, drying fatty acid used for fast air and baking - curing primers or finishes with high characteristics of adhesion, flow and hardness. It contains 38% oil, 68% solids, and has a solvent of butylglycol. This product has a colour [G.H.] maximum of 12, an A.V. solids content of 45-55, and a viscosity [G.H.] of Z-Z2. verkürzen | |
| IDROBEN PD 7051 | Benasedo | IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulat...weiterlesen IDROBEN PD 7051 is a solvent free hydroxylated aliphatic polyurethane dispersion. It is particularly indicated for formulating clear and pigmented waterborne enamels. Hydrophobic types could be also used to improve the overall performances of the formulations. verkürzen | |
| IDROBEN PD 717 | Benasedo | IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plas...weiterlesen IDROBEN PD 717 is a special air-drying polyurethane resin with very fast drying properties. The addition of metallic dryers helps to improve the film properties. It is suggested for formulating clear and pigmented industrial primers and top coats for plastics (ABS.Polystyrene etc.), glass and metals, endowed with very good hardness, good resistance to organic solvents like gasoline and ethanol. verkürzen | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...weiterlesen IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. verkürzen | |
| IDROBEN PD 723 40% W | Benasedo | IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Pol...weiterlesen IDROBEN PD 723 40% W s a special fast air-drying polyurethane resin, modified with non yellowing drying Fatty Acids. It is suggested for formulating clear and pigmented enamels used in the General industrial and Decorative fields or for plastics (ABS, Polystyrene etc.) wood and metal substrates, endowed with Flexibility, adhesion, very good water and out door resistance. verkürzen | |
| IDROBEN UV 737G | Benasedo | IDROBEN UV 737G shows good reactivity, balanced hardness and flexibility, matched with very good chemical and scratch resistance properties. The resin is characterized by very high gloss and body. It can be used in dual curing systems. | |
| Idroben UV 747 | Benasedo | Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on w...weiterlesen Idroben UV 747 shows high reactivity good chemical resistance, balanced hardness and flexibility properties. The binder is particularly recommended for sealers and topcoats, though suitable for white pigmented sealers. The binders shows good adhesion on wood and MDF substartes and, in particolar cases, could be also used for metal. verkürzen | |
| Idroben UV 76 | Benasedo | Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be ...weiterlesen Idroben UV 76 is suitable for pigmented formulations due to its very high final hardness and good reactivity. This binder is tack free before the UV lamps. This product shows good reactivity with colours like yellow, red and black, and is difficult to be cured under UV lamps. It also shows a very good yellowing resistance, so that it’s really suitable for white pigmented paints. Idroben UV 76 shows very good chemical resistances and could be also used for clear matte paints. verkürzen | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| ISOBEN 10 | Benasedo | ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss ...weiterlesen ISOBEN 10 is an hydroxylated polyester resin suitable to be crosslinked with isocyanate prepolymers. It is considered a peculiar binder for wood top coats, metals and papers endowed with excellent colour retention, outdoor resistances, flexibility, gloss and build up. verkürzen | |
| ISOBEN 11 | Benasedo | ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce...weiterlesen ISOBEN 11 is a hydroxylated saturated polyester resin, endowed with high characteristics of reactivity in two-components polyurethane systems, with very good mechanical and chemical resistances. It is suggested, also combined with other Isoben, to produce wood coatings for frames or parquets. verkürzen | |
| ISOBEN 15 | Benasedo | ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended f...weiterlesen ISOBEN 15 is a non yellowing hydroxilated polyester resin endowed with very good body, adhesion and flexibility properties. It’s designed for 2K glossy applications. It shows a very good compatibility with acrylic resins, so that it could be recommended for car refinishing, industrial and wood paints also for marine outdoor applications, combined with aliphatic isocyanates. verkürzen | |
| ISOBEN 168 | Benasedo | ISOBEN 168 is a high–solids non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. It is suggested for polyurethane lacquers for marine automotive industry, enamels for wood and metals with outdoor resistance. | |
| ISOBEN 5 | Benasedo | ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pig...weiterlesen ISOBEN 5 is a saturated branched polyester with high hydroxyl content, suggested in two-component systems when adhesion, color and gloss retention, mechanical, outdoor and chemical resistances are particularly required. It is suggested for formulating pigmented or clear finishes, for metals, in automotive industry, marine superstructures and concrete manucfatures . verkürzen | |
| ISOBEN 6 | Benasedo | ISOBEN 6 is a non–yellowing saturated polyester, endowed with high–body, brightness, adhesion and flexibility. In combination with aliphatic polyisocianates, provides films having very good gloss and colour retention. | |
| ISOBEN 87 | Benasedo | ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain ...weiterlesen ISOBEN 87 is a non–yellowing saturated polyester, endowed with high-body, brightness, adhesion and flexibility. It is suggested for formulating pigmented or clear finishes, for wood, easyly polishing; crosslinked with aliphatic polyisocianates, to obtain high–quality enamels for metals, suitable both for interior and exterior applications. verkürzen | |
| Methyltriethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silico...weiterlesen Methyltriethoxysilane is an industrial grade colorless, transparent liquid. It is used as water repellent to improve fillers dispersibility and reduces their sedimentation tendency. It can also be used as an important component for sol-gel coating, silicone resins and silicone rubber,silicone resins and silicone rubber. verkürzen | |
| Methyltrimethoxysilane | Beijing Entrepreneur Science &Trading Co., Ltd. | Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainl...weiterlesen Methyltrimethoxysilane is a colorless, low-viscosity liquid, regarded as trifunctional since all three alkoxy groups are able to participate in this reaction. Additionally it contains a methyl group that adds organic character to the products. It is mainly used as the crosslinking agent of room temperature vulcanized silicone rubber, as well as the glass fiber surface treatment agent and reinforced plastic laminate treatment agent, in order to improve the mechanical strength of products, heat resistance, moisture resistance. verkürzen | |
| Modified Starch - Compound Active Printing Paste | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological pro...weiterlesen Modified Starch - Compound Active Printing Paste is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. verkürzen | |
| Modified Starch - High End | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holdi...weiterlesen Modified Starch - High End is ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. verkürzen | |
| Modified Starch - Mid Range | Beijing Entrepreneur Science &Trading Co., Ltd. | Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, ...weiterlesen Modified Starch - Mid Range is the ideal product to replace the sodium alginate in the textile printing industry. This printing paste has not only the advantages of high yield of forming thickening agent, but also good rheological properties, thixotropy, holding water capacity, screening, dilution resistance, alkali and salt resistance. It also overcomes the disadvantages of the traditional sodium alginate printing paste in the printing process such as the low color yield and brilliance, bad screening and short retention time of the original paste. The performance/price ratio of this paste is much higher than the sodium alginate and it is the most advanced printing paste products at present. verkürzen | |
| Nano Silver Powder TFNP-30 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-30 is a moderate tap density,high dispersion, spherical nanometer silver powder. TFNP-30 is ideal for low-temperature sintering paste, low silver content and high conductive paste, and touchscreen slurry. | |
| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| POLIFEN 2090 | Benasedo | POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric ...weiterlesen POLIFEN 2090 is suitable both for interior gold varnishes used both for food contact paints and for chemical resistant enamels used in the general industry field. The recommended stoving temperature ranges from 180°C to 220°C. Small amounts of phosphoric acid catalyst are helpful to achieve a fully cured polymer. verkürzen | |
| Polifen 365 | Benasedo | Polifen 365 is a Water soluble Phenolic Resin to be combined with Epoxy resins for interior clear and pigmented enamels used in the Can Coating fields. It is suitable for food contact paints, according to FDA 21 CFR175.300. | |
| Polifen 410 | Benasedo | Polifen 410 is yellow brown resin suitable for interior gold lacquers used in the can coating field. It is in compliance with FDA 21 CFR 175.300, so that it could be used for food contact paints. | |
| POLIFEN 6120 | Benasedo | POLIFEN 6120 is a BPA and BADGE free binder endowed with high solid content. It is suitable to formulate food contact interior can coating paints, according to FDA 21 CFR 175.300. POLIFEN 6120 is endowed with very good flexibility, adhesion and chemical ...weiterlesen POLIFEN 6120 is a BPA and BADGE free binder endowed with high solid content. It is suitable to formulate food contact interior can coating paints, according to FDA 21 CFR 175.300. POLIFEN 6120 is endowed with very good flexibility, adhesion and chemical resistance properties. verkürzen | |
| Polyvinyl Alcohol | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl alcohol is an important chemical raw materials for the manufacture of polyvinyl acetal, resistance to gasoline pipelines and vinylon synthetic fibers, fabric treatment agents, emulsifiers, paper coatings, adhesives, glues and so on. | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...weiterlesen Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. verkürzen | |
| PVB | Beijing Entrepreneur Science &Trading Co., Ltd. | Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PV...weiterlesen Polyvinyl butyral (PVB) with hydrochloric acid as catalyst, is made from polyvinyl alcohol and butyl aldehyde. The abbreviate is PVB. High gloss, high transparent, non-toxic, smell-less, fast dissolve, etc. It’s good soluble with pigments and dyes. The PVB has high transparency, good cold resistance, water resistance, film forming properties and impact resistance, widely used in middle film of glass, ceramic flower paper, metal protective paint, tipping paper, aluminum foil, insulation paint, fiber treatment agent, finished parts, printing inks, dyes and so on. verkürzen | |
| SandGel B | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness ...weiterlesen SandGel B, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel B, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. verkürzen | |
| SandGel BL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and i...weiterlesen SandGel BL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BL, is supplied as a white powder with optimize purity, whiteness and is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. verkürzen | |
| SandGel BN | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspensi...weiterlesen SandGel BN, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel BN, disperses easily and hydrates rapidly, has superior suspension and thixotropy, can be added as powder or blend with other ingredient in aqueous system. verkürzen | |
| SandGel C | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrol...weiterlesen SandGel C, a selectively mined, water-washed, ultrafine crushed and surface modified product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel C, is cellulose modified product, and has excellent anti electrolyte performance, water-retaining property and rheological property, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. verkürzen | |
| SandGel HL | Beijing Entrepreneur Science &Trading Co., Ltd. | SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, ...weiterlesen SandGel HL, a selectively mined, specially processed and water-washed smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. SandGel HL, has higher viscosity in low solid content and superior thixotropy, can be used as thickener, thixotropy, suspending agent, adhesive, latex stabilizer, etc. It has the value to improve the storage stability, workability, and to prevent subsidence and drainage phenomenon. verkürzen | |
| SCA-Y25E | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...weiterlesen SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. verkürzen | |
| SCA-Y25M | Beijing Entrepreneur Science &Trading Co., Ltd. | SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...weiterlesen SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. verkürzen | |
| Silane ATPN-1100 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to ...weiterlesen Silane ATPN-1100 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. verkürzen | |
| Silane ATPN-1110 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion an...weiterlesen Silane ATPN-1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It can improve the dispersion and wet ability of filler in the high molecular materials. ATPN-1110 is an excellent promoter of adhesion and sealant (such as polyurethane, epoxy, and phenol). In the glass wool and FRP products, it can be added into phenol resins to improve the wet resistance and mechanical performance. verkürzen | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of...weiterlesen Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. verkürzen | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...weiterlesen Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. verkürzen | |
| Silane ATPN-187 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass ...weiterlesen Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. verkürzen | |
| Silane Coupling Agent Si-69 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strengt...weiterlesen Silane Coupling Agent Si-69 is a kind of multifunctional silane coupling agent that has been used successfully in the rubber industry. It is used to improve physical and mechanical properties of vulcanizates. It is able to markedly improve tensile strength, tearing strength and abrasive resistance and reduce compression set of vulcanizates. In addition, it can reduce the viscosity and improve the processability of rubber products. Si-69 is especially suitable to improve the reinforcing properties of fillers that contain hydroxyl groups in all unsaturated polymers having double bonds or their blends. verkürzen | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...weiterlesen SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. verkürzen | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...weiterlesen SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. verkürzen | |
| Silver Coated Copper Powder | Beijing Entrepreneur Science &Trading Co., Ltd. | Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechani...weiterlesen Silver Coated Copper Powder has Good electrical conductivity, high electrical conductivity and it is not easy to be oxidized, it is a promising good conductive material. It is a good conductive material, it is widely used in the electronic, electromechanical, communication, printing, aerospace, etc. verkürzen | |
| Sulfolane Anhydrous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...weiterlesen Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. verkürzen | |
| Sulfolane Aqueous | Beijing Entrepreneur Science &Trading Co., Ltd. | Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromati...weiterlesen Sulfolane is a colorless and tasteless solid at room temperature, melted at 27.8℃. Most industrial products are colorless and light yellow liquid. Sulfolane has high solubility property and selectivity. It is soluble in water and easily soluble in aromatics and alcohol, but has little solubility in paraffin and olefin hydrocarbon. Sulfolane has high stability with hot acid and alkali. It doesn’t react with acid, alkali, sulfur, oralcohol at room temperature, and also doesn’t decompose and polymerize. When the temperature is higher than 240℃, the sulfolane will decompose SO2. Sulfolane has stable chemical property, it will not appear polyreaction and decomposition under common condition with the existence of acid and alkali. verkürzen | |
| UVB2000 Special Tertiary Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side an...weiterlesen UVB2000 Special Tertiary Amine Acrylate is a difunctional amine coinitiator which, when used in conjunction with a photosensitizer such as benzophenone, promotes rapid curing under UV light. Additional benefits include reduced odors, both at press side and in the cured film, and reduced blooming. It is ideal for use in a wide range of applications. verkürzen | |
| UVB2200 Reactive Amine Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of...weiterlesen UVB2200 Reactive Amine Acrylate is a very low viscosity, highly reactive amine modified polyetheracrylate oligomer for use in UV and EB curing systems. UVB2200 can be used as the sole binder or with monomer diluents. It is ideal for use in a wide range of applications. verkürzen | |
| UVE3216 Modified Epoxy Acrylate | Beijing Entrepreneur Science &Trading Co., Ltd. | UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide...weiterlesen UVE3216 Modified Epoxy Acrylate is a high molecular weight, acid modified epoxy acrylate. It blended with 10% tripropylene glycol diacrylate. It allows high gloss, fast cure response, higher flexibility and low shrikage. UVE3216 is ideal for use in a wide range of applications. verkürzen | |
| UVU 6451 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU 6451 is a tetrafunctional aliphatic urethane acrylate oligomer developed for UV/EB-cured coatings and inks. It imparts hardness, very fast cure response, and non-yellowing characteristics to these applications. | |
| UVU6219 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of appli...weiterlesen UVU6219 is an aliphatic polyester based urethane diacrylate oligomer blended with 20% TPGDA, tripropylene glycol diacrylate. It is a flexible oligomer offering good weatherability, and low skin irritation. UVU6219 is ideal for use in a wide range of applications. verkürzen | |
| UVU6305 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of ...weiterlesen UVU6305 is a trifunctional aliphatic polyester urethane acrylate oligomer developed for use in UV and EB cured inks and coatings. Weatherability, low viscosity, and fast cure are among the key attributes of UVU6305. It is ideal for use in a wide range of applications. verkürzen | |
| UVU6609 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6609 is a hexafunctional aliphatic urethane acrylate oligomer. It offers low viscosity and good abrasion and heat resistance. UVU6609 is ideal for use in a wide range of applications. | |
| UVU6906 | Beijing Entrepreneur Science &Trading Co., Ltd. | UVU6906 is a multifunctional urethane acrylate oligomer that imparts chemical resistance, fast cure response, weatherability, and abrasion resistance to radiation-cure coatings. It is ideal for use in a wide range of applications. |
