| 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...weiterlesen 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. verkürzen | |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| BLS® 1328 | Mayzo, Inc. | BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, ...weiterlesen BLS® 1328 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation, helping to preserve the original appearance and physical integrity. BLS® 1328 is used in organic pigments, protective coatings, automotive coating substrates, urethane solvents, thermosetting acrylic clear topcoats, and adhesives. verkürzen | |
| BLS® 1710 | Mayzo, Inc. | BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organ...weiterlesen BLS® 1710 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity. BLS® 1710 is used in adhesives and organic pigments. verkürzen | |
| BLS® 292 | Mayzo, Inc. | BLS® 292 is a liquid hindered amine light stabilizer (HALS). It provides outstanding light stability and long term stability. BLS® 292 is used in coil coatings, automotive coatings, radiation curable coatings, paints, inks, and wood stains. | |
| BLS® 292HP | Mayzo, Inc. | BLS® 292HP is a fused mass (liquid) hindered amine light stabilizer (HALS) that is a higher purity than the regular BLS® 292. It provides outstanding light stability and long term stability. BLS® 292HP is used in coil coatings, automotive coatings, radiat...weiterlesen BLS® 292HP is a fused mass (liquid) hindered amine light stabilizer (HALS) that is a higher purity than the regular BLS® 292. It provides outstanding light stability and long term stability. BLS® 292HP is used in coil coatings, automotive coatings, radiation curable coatings, paints, inks, and wood stains. verkürzen | |
| BLS® 5411 | Mayzo, Inc. | BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used i...weiterlesen BLS® 5411 is a benzotriazole type ultraviolet light absorber (UVA), imparting good light stability. It protects organic pigments from UV radiation helping to preserve the original appearance and physical integrity of polymeric systems. BLS® 5411 is used in coatings (particularly thermo sets where low volatility is a concern), photographic products, sealants, and glazing materials for window lighting, signs, marine, and auto applications. verkürzen | |
| EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...weiterlesen EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. verkürzen | Request Sample |
| GENOCURE* EMK | Rahn USA Corp. | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...weiterlesen GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. verkürzen | Request Sample |
| GENOMER* 5271 | Rahn USA Corp. | GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...weiterlesen GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. verkürzen | Request Sample |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| INT A81 UV | Intech Synthetic Materials | INT A81 UV posses a unique function of preventing the polymerization reaction among monomers in UV-curable coatings and printing ink systems, which results in a desirable gel-resistance.As a synthetic resin, INT A81 UV is the condensation of urea and alip...weiterlesen INT A81 UV posses a unique function of preventing the polymerization reaction among monomers in UV-curable coatings and printing ink systems, which results in a desirable gel-resistance.As a synthetic resin, INT A81 UV is the condensation of urea and aliphatic aldehydes, colorlessly crystal or slightly yellow, soluble in most paint solvents except water and widely compatible with coating raw materials.it is inactive in chemistry and doesn't take part in UV-curing reaction,but when used for UV coating and ink's production,it performs satisfctorily to help film forming process thanks to its low viscosity. verkürzen | |
| Light Stabilizer 123 | North Wanxing Chemical Co., Ltd. | Light Stabilizer 123 is a low basicity hindered amine light stabilizer with a clear, slightly yellow liquid appearance and radical scavenging properties. This product is designed to promote light stabilization and prevent surfaces from blowing-out, peelin...weiterlesen Light Stabilizer 123 is a low basicity hindered amine light stabilizer with a clear, slightly yellow liquid appearance and radical scavenging properties. This product is designed to promote light stabilization and prevent surfaces from blowing-out, peeling-off, or chalking. Common applications include high solid automotive and industrial coatings, printing ink, and polyurethane lacquers. verkürzen | |
| S-381-N5 (Carnauba / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | S-381-N5 is a carnauba and polyethylene micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommended for liquid inks. | |
| TEGO® Twin 4200 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This prod...weiterlesen TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This product also offers enhanced reduction of surface tension and high compatibility. verkürzen | Request Sample |
| TINOPAL® OB CO | BASF Dispersions & Resins | A fluorescent optical brightener for coating and printing ink applications. | |
| TINOPAL® SFP | BASF Dispersions & Resins | Tinopal® SFP is a fluorescent optical brightener for photographic color developer baths or as fluorescent tracers. | |
| TINUVIN® 1130 | BASF Dispersions & Resins | Tinuvin® 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. ...weiterlesen Tinuvin® 1130 is a liquid UV absorber of the hydroxyphenyl benzotriazole class specifically developed for industrial coating applications. Its high temperature and extraction resistance makes it especially suitable for industrial and automotive coatings. Because of its broad UV absorption, it also provides efficient protection to light sensitive substrates such as wood and plastics. Tinuvin® 1130 can be used in waterborne and solvent borne coating applications. verkürzen | |
| TINUVIN® 123 | BASF Dispersions & Resins | Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate sy...weiterlesen Tinuvin® 123 is a liquid hindered amine light stabilizer (HALS) based on an amino-ether functionality. It has been developed especially for high solids, acid catalyzed automotive and industrial coatings, such as two-coat metallic thermosetting acrylate systems or one-coat opaque thermosetting acrylate and polyester coatings. Its low basicity prevents possible interactions with acidic paint ingredients such as catalysts. Its efficiency provides significant improvement in coatings performance by minimizing paint defects such as cracking and gloss reduction for clear coats as well as chalking for pigmented paints. verkürzen | |
| TINUVIN® 292 | BASF Dispersions & Resins | Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to soli...weiterlesen Tinuvin® 292 is a liquid hindered amine light stabilizer especially developed for coatings. It is an almost pure mixture of the two active ingredients below. It is this combination that keeps the product liquid, unlike the pure diester which tends to solidify, even at room temperature. The efficiency of Tinuvin® 292 provides significantly extended lifetime to coatings by minimizing paint defects such as cracking and loss of gloss. The dispersion of Tinuvin® 292 in waterborne coatings may be facilitated by dilution with a watermiscible solvent such as butylcarbitol. The performance of Tinuvin® 292 can be significantly improved when used in combination with a UV absorber such as recommended below. These synergistic combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination and color change. verkürzen | |
| TINUVIN® 384-2 | BASF Dispersions & Resins | Tinuvin® 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental con...weiterlesen Tinuvin® 384-2 is a liquid UV absorber of the hydroxyphenylbenzotriazole class developed for coatings. Its very high thermal stability and environmental permanence makes it suitable for coatings exposed to high bake cycles and/or extreme environmental conditions. It has been designed to fulfill the high performance and durability requirements of automotive and industrial high quality finishes. Its broad UV absorption allows efficient protection of light sensitive base coats or substrates such as wood and plastics. Since its absorption spectrum does not tail significantly into the visible region, it is an ideal UV absorber for those systems where initial yellowing must be kept to a minimum. verkürzen | |
| TINUVIN® 400-DW (N) | BASF Dispersions & Resins | Tinuvin® 400-DW is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill...weiterlesen Tinuvin® 400-DW is an aqueous white to light beige liquid dispersion of a 2-hydroxy-phenyl-s-triazine (HPT) UV absorber (UVA). It is a versatile light stabilizer which can be used in a variety of waterborne coating systems. It has been designed to fulfill the high cost/performance and durability requirements of interior and exterior industrial, decorative and automotive coatings. The high thermal stability and photo-permanence makes it suitable for coatings exposed to high bake temperatures and/or to extreme environmental conditions. verkürzen | |
| TINUVIN® 460 | BASF Dispersions & Resins | Tinuvin® 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silve...weiterlesen Tinuvin® 460 is a UV light absorber of the hydroxyphenyl-triazine class. Due to its extremely high extinction, it provides outstanding protection to coatings and light sensitive substrates and materials. It is therefore especially suited for use in silver halide photographic papers or overprint varnishes. This product is a slightly yellow powder. verkürzen | |
| TINUVIN® 477 | BASF Dispersions & Resins | Tinuvin® 477 is a liquid, high performance UV absorber developed for solventborne and liquid UV curable coatings. Based on a red shifted Tris-Resorcinol-Triazine chromophore, it is suited for the protection of UVA range sensitive substrates or ingredients...weiterlesen Tinuvin® 477 is a liquid, high performance UV absorber developed for solventborne and liquid UV curable coatings. Based on a red shifted Tris-Resorcinol-Triazine chromophore, it is suited for the protection of UVA range sensitive substrates or ingredients. verkürzen | |
| TINUVIN® 477-DW (N) | BASF Dispersions & Resins | Tinuvin® 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high he...weiterlesen Tinuvin® 477-DW (N) is an aqueous UV absorber dispersion developed for waterborne coatings. Based on a red shifted hydroxyphenyl-s-trizine chromophore, it is suited for coatings and substrates requiring strong UVA range wavelength protection. Its high heat stability and excellent photo-permanence provide superior UV stabilization and fulfill the requirements of high performance industrial, decorative, and wood coatings. verkürzen | |
| TINUVIN® 479 | BASF Dispersions & Resins | Tinuvin® 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal ca...weiterlesen Tinuvin® 479 is a hydroxyphenyl-triazine (HPT) UV absorber designed to fulfill the high performance and durability needs for automotive and industrial finishes. It has been developed as an interaction free UV absorber to be used in amine and / or metal catalyzed coating systems or in coatings applied on base coats containing such catalysts. Its high extinction coefficient allows the formulation of coatings with reduced UV absorber levels and / or thin film applications. Combinations especially with other HPT UV absorbers and the newest generation photoinitiators makes it an excellent choice for UV curing coatings. Tinuvin® 479 is recommended for automotive OEM and refinish systems, UV cured coatings, and industrial finishes where long life performance is essential. Due to the high extinction coefficient and superior photostability applications specifically include thin film applications. Depending on the application, the spectral coverage can be further broadened through combinations with other UV absorbers of the hydroxyphenyl-triazine or hydroxyphenyl-benzotriazole class such as Tinuvin® 400 or Tinuvin® 928. verkürzen | |
| TINUVIN® 5050 | BASF Dispersions & Resins | Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne in...weiterlesen Tinuvin® 5050 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings. The broad UV absorbance of Tinuvin® 5050 makes it suitable for a wide range of coatings for wood, plastics and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| TINUVIN® 5060 | BASF Dispersions & Resins | Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborn...weiterlesen Tinuvin® 5060 is a solvent-free, liquid blend of a 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a non-basic hindered amine light stabilizer (HALS) designed to fulfill the high cost/performance and durability requirements of exterior solventborne industrial and decorative coatings and is especially suited for oxidative drying and acid catalyzed systems. The broad UV absorbance of the used UVA of Tinuvin® 5060 makes it suitable for a wide range of coatings for wood, plastics, and metal. The non-basic character of the used NOR HALS prevents possible interactions with acidic paint ingredients such as catalysts, biocides, and pigments. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| TINUVIN® 5151 | BASF Dispersions & Resins | Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solven...weiterlesen Tinuvin® 5151 is a liquid blend of a hydrophilic 2-(2-hydroxyphenyl)-benzotriazole UV absorber (UVA) and a basic hindered amine light stabilizer (HALS) designed to fulfill high cost/performance and durability requirements of exterior waterborne and solventborne industrial and decorative coatings. The broad UV absorbance of the used UVA of Tinuvin® 5151 makes it suitable for a wide range of coatings for wood, plastics, and metal. The synergistic combination imparts superior coating protection against gloss reduction, cracking, blistering, delamination, and color change and provides full substrate protection. verkürzen | |
| TINUVIN® 5333-DW (N) | BASF Dispersions & Resins | Tinuvin® 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of ...weiterlesen Tinuvin® 5333-DW (N) is an aqueous dispersion of a blend of UV absorbers (UVA) and a hindered amine light stabilizer (HALS) for coatings, adhesives, sealants, and printing inks. It was also designed to meet high performance and durability requirements of exterior water-based industrial and architectural coatings including energy curable systems (UV, electron beam). This product is a slightly yellow dispersion. verkürzen | |
| TINUVIN® 928 | BASF Dispersions & Resins | Tinuvin® 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excel...weiterlesen Tinuvin® 928 is UV absorber of the hydroxyphenyl benzotriazole class developed specially for high performance coating applications. Its characteristic broadband absorption provides efficient protection to coatings and light sensitive substrates. Its excellent solubility and high thermal and environmental permanence makes it particularly suitable for coatings exposed to high temperature curing processes, such as powder and coil coatings, or high environmental stress. It may be used in combination with a light stabilizer of the sterically hindered amine or aminoether class (HALS) such as recommended below. These combinations give coatings superior protection against gloss reduction, cracking, blistering, delamination, and color change. The light stabilizers may be added in two-coat automotive finishes to the base and clear coat. verkürzen | |
| TINUVIN® 9945-DW (N) | BASF Dispersions & Resins | Tinuvin® 9945-DW (N) is a solvent-free, aqueous UV absorber dispersion for high performance industrial and decorative waterborne coating applications. |
