ADDITOL® P 824 | Allnex | ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is co...weiterlesen ADDITOL® P 824 is a 15% active flow promoter masterbatch on an outdoor resistant hydroxylated polyester matrix that can be used in the manufacture of powder coatings. An addition of 3-5%, by weight to a powder coating formulation increases gloss and is compatible with nearly all powder coating systems. verkürzen | Request Sample |
ADDITOL® P 891 | Allnex | ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the m...weiterlesen ADDITOL® P 891 is a flow promoter masterbatch suitable for use in clear powder coatings. ADDITOL® P 891 contains approximately 5% active substance in an outdoor resistant carboxylated polyester matrix.The addition of 7-10% on binder is suggested for the manufacture of haze-free clear coatings with very good flow. verkürzen | Request Sample |
ADDITOL® P 896 | Allnex | ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formula...weiterlesen ADDITOL® P 896 is a flow promoter master batch suitable for use in pigmented powder coatings. It contains approximately 15% active substance in an outdoor resistant hydroxylated polyester carrier. The addition of 3-5% by weight to a powder coating formulation is recommended to improve flow while maintaining good compatibility with nearly all powder coating systems. verkürzen | Request Sample |
ADDITOL® VXL 4930 N | Allnex | ADDITOL® VXL 4930 N -flow/leveling/levelling- is a modified silicone for improvement of levelling and surface smoothness of solvent containing and aqueous paints. | Request Sample |
ADDITOL® VXW 6396 | Allnex | ADDITOL® VXW 6396 is a flow and leveling agent for waterborne paint systems, without silicone addition. It's a fluorene modified acrylic resin copolymer, neutralized with amine, and improves leveling and substrate wetting. | Request Sample |
ADDITOL® VXW 6503 N | Allnex | ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling wi...weiterlesen ADDITOL® VXW 6503 N -flow/leveling/levelling- is a levelling and substrate wetting agent based on a polyether modified polysiloxan for waterborne paint systems. Because of strong reduction in surface tension, it improves substrate wetting and levelling without foam stabilisation. verkürzen | Request Sample |
ADDITOL® XL 109/50LG | Allnex | ADDITOL® XL 109/50LG is a specific antioxidizing agent for oxidizing paint systems and inhibits or retards the crosslinking reactions initiated by air oxygen in the surface of paint films. | Request Sample |
ADDITOL® XL 121 N | Allnex | ADDITOL® XL 121 N -flow/leveling/levelling- is a paint additive to enhance mar resistance and levelling of air drying and stoving paints, particularly for silicone modified air drying and stoving alkyd resins. | Request Sample |
ADDITOL® XL 123 N | Allnex | Additol® XL 123 N is a flow agent and defoamer based on a modified silicone oil, for air drying and stoving coatings systems. | Request Sample |
ADDITOL® XL 480 | Allnex | Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc...weiterlesen Additol® XL 480 is a leveling agent without addition of silicone, amine resin modified acrylic copolymer. It may be used with any type of paint material, e.g. on the basis of alkyd/melamine systems, acrylics, polyurethane systems, oil-free polyesters, etc. It also prevents surface defects of paint films. verkürzen | Request Sample |
ADDITOL® XL 481 | Allnex | ADDITOL® XL 481 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, industrial coatings and wood finishes. It is compatible with a variety of resin chemistries including, but not limit...weiterlesen ADDITOL® XL 481 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, industrial coatings and wood finishes. It is compatible with a variety of resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 481 contains no silicone ingredients. verkürzen | Request Sample |
ADDITOL® XL 482 | Allnex | ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC...weiterlesen ADDITOL® XL 482 is a cost effective flow modifier developed for use in a wide range of solvent-borne applications including coil coatings, OEM & vehicle refinish, industrial coatings and wood finishes. At 100% solids, it is a perfect companion for low VOC coatings as well as sensitive compositions that require specific solvents. It is effective with most resin chemistries including, but not limited to, high solids alkyds, polyesters, and acrylics. ADDITOL XL 482 contains no silicone ingredients. verkürzen | Request Sample |
ADDITOL® XL 490 | Allnex | Additol® XL 490 is a levelling and anticrater agent for enhancing the surface quality of paint film, without silicon addition. | Request Sample |
ADDITOL® XW 390 | Allnex | Additol® XW 390 is a flow and wetting agent without silicone addition for waterborne coating systems. It prevents flow defects in all waterborne coating systems and promotes substrate wetting. | Request Sample |
ADDITOL® XW 395 | Allnex | Additol® XW 395 is a levelling, wetting and antifloating agent, for waterborne paint systems. | Request Sample |
ADDITOL® XW 6580 | Allnex | ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam...weiterlesen ADDITOL® XW 6580 flow/leveling/levelling- is a leveling and substrate wetting agent based on a polyether modified siloxane for waterborne and solventborne paint systems. Strong surface tension reduction improves substrate wetting and leveling without foam stabilization. verkürzen | Request Sample |
MODAFLOW® 2100 | Allnex | Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion. | Request Sample |
MODAFLOW® 9200 | Allnex | Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion. | Request Sample |
MODAFLOW® AQ 3000 | Allnex | MODAFLOW® AQ 3000 -flow/leveling/levelling- is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
MODAFLOW® AQ 3025 | Allnex | Modaflow® AQ 3025 is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries. | Request Sample |
MODAFLOW® EPSILON | Allnex | Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and...weiterlesen Modaflow® Epsilon is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces defects, and improves substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. verkürzen | Request Sample |
MODAFLOW® Lambda | Allnex | MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. I...weiterlesen MODAFLOW® Lambda -flow/leveling/levelling- is an acryl-silicone hybrid flow promoter. It is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulations and outperforms surface characteristics such as gloss, DOI, sharpness and brilliancy, and anti orange-peel effect. verkürzen | Request Sample |
MODAFLOW® Powder 6000 | Allnex | MODAFLOW® Powder 6000 resin modifier developed to control surface defects in powder coating systems. MODAFLOW® Powder 6000 performs well in all typical thermoset powder coating chemistries. The addition can significantly improve the surface properties of ...weiterlesen MODAFLOW® Powder 6000 resin modifier developed to control surface defects in powder coating systems. MODAFLOW® Powder 6000 performs well in all typical thermoset powder coating chemistries. The addition can significantly improve the surface properties of unmodified resins to improved flow and leveling, reduced pinholes, fisheyes, craters, and orange peel, and broaden cross-compatibility between powder formulations. verkürzen | Request Sample |
MODAFLOW® Resin | Allnex | Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. T...weiterlesen Modaflow® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion. verkürzen | Request Sample |