| Pluracare® E 200 | BASF Personal Care |
|
Pluracare® E 200 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a density of approx. 1.12 g/cm^3, a clear melting point of approx. -40°C, and a flash ...weiterlesen
Pluracare® E 200 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a density of approx. 1.12 g/cm^3, a clear melting point of approx. -40°C, and a flash point of approx. > 170°C. It is a water-soluble polyether alcohol that can be employed as a solubilizer and viscosity control agent in a variety of applications. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 300 | BASF Personal Care |
|
Pluracare® E 300 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry, as it is a clear, colorless liquid at 23°C. It has a density (60°C) of approx. 1.12 g/cm^3, a...weiterlesen
Pluracare® E 300 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry, as it is a clear, colorless liquid at 23°C. It has a density (60°C) of approx. 1.12 g/cm^3, a clear melting point of approx. -10°C, and a flash point of approx. > 200°C. It is a water-soluble polyether alcohol that can be employed as a solubilizer and viscosity control agent in a variety of applications. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 400 | BASF Personal Care |
|
Pluracare® E 400 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a density of approx. 1.13 g/cm^3, a clear melting point of approx. 0°C, and a flash po...weiterlesen
Pluracare® E 400 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a density of approx. 1.13 g/cm^3, a clear melting point of approx. 0°C, and a flash point of approx. > 250°C. It is a water-soluble polyether alcohol that can be employed as a solubilizer and viscosity control agent in a variety of applications. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 400 NF PEG FLEX | BASF Personal Care |
|
Pluracare® E 400 NF PEG FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA; a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suit...weiterlesen
Pluracare® E 400 NF PEG FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA; a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 600 | BASF Personal Care |
|
Pluracare® E 600 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a setting point of approx. 20°C, a density of approx. 1.14 g/cm^3, a clear melting poi...weiterlesen
Pluracare® E 600 is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. It has a setting point of approx. 20°C, a density of approx. 1.14 g/cm^3, a clear melting point of approx. 20°C, and a flash point of approx. > 250°C. It is a water-soluble polyether alcohol that can be employed as a solubilizer and viscosity control agent in a variety of applications. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 600 NF PEG FLEX | BASF Personal Care |
|
Pluracare® E 600 NF PEG FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA; a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suit...weiterlesen
Pluracare® E 600 NF PEG FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA; a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® E 8000 Flakes | BASF Personal Care |
|
Pluracare® E 8000 Flakes is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry, and is supplied in flakes. It has a density (70°C) of approx. 1.09 g/cm^3, a clear me...weiterlesen
Pluracare® E 8000 Flakes is a polyethylene glycol that conforms to the general formula HO(CH2CH2O)nH, and is especially suited for the demands of the cosmetics industry, and is supplied in flakes. It has a density (70°C) of approx. 1.09 g/cm^3, a clear melting point of approx. 63°C, and a flash point of approx. > 300°C. It is a water-soluble polyether alcohol that can be employed as a solubilizer and viscosity control agent in a variety of applications. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® F 108 NF Prill | BASF Personal Care |
|
Pluracare® F 108 NF Prill is a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. This product has an aver...weiterlesen
Pluracare® F 108 NF Prill is a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. This product has an average molecular weight of 14,600, a viscosity of 2,800 cP, and a pour/melt point of 57°C. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® F 127 NF Prill | BASF Personal Care |
|
Pluracare® F 127 NF Prill is a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. This product has an aver...weiterlesen
Pluracare® F 127 NF Prill is a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. This product has an average molecular weight of 12,600, a viscosity of 3,100 cP, and a pour/melt point of 56°C. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® F 127 NF Prill FLEX | BASF Personal Care |
|
Pluracare® F 127 NF Prill FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA. a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants...weiterlesen
Pluracare® F 127 NF Prill FLEX is a new alternative to an existing product that offers guaranteed low 1,4-Dioxane levels, certified at batch level on every COA. a copolymer of ethylene oxide and propylene oxide and has general functionality of surfactants, emulsifiers, solubilizers and stabilizers in preparations where the quality of poloxamer may be required. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® L 1220 | BASF Personal Care |
|
Pluracare® L 1220 copolymer is the product of the reaction between ethylene oxide (EO) and propylene oxide (PO). It is used as a solubilizer for flavors and fragrances in aqueous and hydro-alcoholic systems such as mouthwashes. It enhances whitening effic...weiterlesen
Pluracare® L 1220 copolymer is the product of the reaction between ethylene oxide (EO) and propylene oxide (PO). It is used as a solubilizer for flavors and fragrances in aqueous and hydro-alcoholic systems such as mouthwashes. It enhances whitening efficacy and provides binding, retention to tooth surface, and stain prevention benefits. This product is often used in combination with Pluracare® L 4370 to form anhydrous bases for personal care formulations, including toothpastes. verkürzen
Compliance Highlights Unavailable
|
Request Sample |
| Pluracare® L 4370 | BASF Personal Care |
|
Pluracare® L 4370 copolymer is the product of the reaction between ethylene oxide (EO) and propylene oxide (PO). It has a neutral taste profile. It enhances whitening efficacy and provides binding, retention to tooth surface, and stain prevention benefits...weiterlesen
Pluracare® L 4370 copolymer is the product of the reaction between ethylene oxide (EO) and propylene oxide (PO). It has a neutral taste profile. It enhances whitening efficacy and provides binding, retention to tooth surface, and stain prevention benefits. This product is often used in combination with Pluracare® L 1220 to form anhydrous bases for personal care formulations. verkürzen
Compliance Highlights Available
|
Request Sample |
| Pluracare® L 64 | BASF Personal Care |
|
Pluracare® L 64 is a block copolymer of ethylene glycol and propylene glycol that is used as an emulsifier in a wide variety of areas from cosmetics to oral care products. It has a cloud point of 58-62°C, an average molecular weight of approx. 2,900, and ...weiterlesen
Pluracare® L 64 is a block copolymer of ethylene glycol and propylene glycol that is used as an emulsifier in a wide variety of areas from cosmetics to oral care products. It has a cloud point of 58-62°C, an average molecular weight of approx. 2,900, and a viscosity of approx. 850 mPas. This block copolymer is anhydrous and non-corrosive. Therefore, mild steel can be used for storage tanks, piping and conventional process equipment. verkürzen
Compliance Highlights Available
|
Request Sample |
| ULTRAPEG® 1000 | Indorama Ventures |
|
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...weiterlesen
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 1500 F | Indorama Ventures |
|
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value...weiterlesen
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value of 70-83mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, textiles, and paints. ULTRAPEG® 1500 F may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps, products for makeup (lipsticks, shadows, foundations) and toothpastes. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 200 | Indorama Ventures |
|
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...weiterlesen
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 300 | Indorama Ventures |
|
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...weiterlesen
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 400 | Indorama Ventures |
|
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 2...weiterlesen
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 267-295mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, rubber, ceramic, leathers, lubricants, textiles, and paints. ULTRAPEG® 400 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, soaps and hair spray. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 4000 F | Indorama Ventures |
|
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value ...weiterlesen
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value of 25-315mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, rubber, ceramic, leathers, detergents and paints. ULTRAPEG® 4000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, deodorant, products for skin treatment and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 600 | Indorama Ventures |
|
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 17...weiterlesen
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 178-197mg KOH/g, and a water content of 0.25% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, leathers, detergents, lubricants, personal care, textiles, and paints. ULTRAPEG® 600 may also be used in creams, lotions and moisturizers, products for skin treatment, hair spray and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 6000 F | Indorama Ventures |
|
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...weiterlesen
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. verkürzen
Compliance Highlights Available
|
|
| ULTRAPEG® 8000 | Indorama Ventures |
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...weiterlesen
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). verkürzen
Compliance Highlights Available
|
