| 1-Vinylimidazole, VIM | BASF SE, Intermediates Division 巴斯夫中间体 | 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on...view more 1-Vinylimidazole, VIM is reactive diluent for UV coatings (inks, adhesives, general coatings). A monomer for water soluble specialty polymers (oilfield and cosmetics). It has high reactivity for radical polymerization and improves wetting and adhesion on plastic. view less | |
| 1,2-Dimethylimidazole, Lupragen DMI | BASF SE, Intermediates Division 巴斯夫中间体 | 1,2-Dimethylimidazole, Lupragen DMI is a selective catalyst for epoxy and urethanes reactions. 1,2-Dimethylimidazole is used for two components epoxy systems and for modification of epoxy resins and for preparation of polyurethanes. | |
| 1,3-Diaminopropane | BASF SE, Intermediates Division 巴斯夫中间体 | 1,3-Diaminopropane is a cross linker for epoxy resins, building block for polyamides. 1,3-Diaminopropane is frequently used in epoxy coatings, epoxy composites and epoxy adhesives. | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...view more 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. view less | |
| 1,4-Butanediol, BDO | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for...view more 1,4-Butanediol, BDO is a building block for unsaturated polyesters, saturated polyesters and polyurethanes. It's suitable for flexible furniture coatings and repair putties and is used for flexible solvent borne paints, plasticizers and soft segments for polyurethanes. view less | |
| 1,4-Cyclohexane dimethanol divinyl ether, CHDM di | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Cyclohexane dimethanol divinyl ether, CHDM di is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives, release coatings and artificial marble. | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division 巴斯夫中间体 | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl po...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,5-Pentanediol, PDO | BASF SE, Intermediates Division 巴斯夫中间体 | 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil co...view more 1,5-Pentanediol, PDO is a building block for saturated polyesters, unsaturated polyesters and polyurethanes, solvent for inkjet ink formulations. It's suitable for polyesters for solvent-borne paints (stoving enamels, two-components paints, can & coil coatings), polyester plasticizers and for soft segments for polyurethanes. view less | |
| 1,6-Hexanediol | Perstorp | 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications. | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division 巴斯夫中间体 | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division 巴斯夫中间体 | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| 2-(2-Aminoethoxy) ethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 2-(2-Aminoethoxy) ethanol is a building block for the modification of epoxy resins. 2-(2-Aminoethoxy) ethanol modified epoxy resins are suited for cationic electro deposition coatings. | |
| 2-Acrymido-2-Methyl Propane Sulfuric Acid (AMPS) | Beijing RBL Chemicals Co., Ltd. | 2-Acrymido-2-Methyl Propane Sulfuric Acid (AMPS) is a monomer that has unique structure containing the sulfonic acid group. This product appears as a white powder, and can be used in adhesives, paper coatings, and architectural and industrial coatings. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| 2-Ethylhexanol | Perstorp | 2-Ethylhexanol is a clear, colorless liquid acrylic monomer. This product provides flexibility, water resistance and exterior durability in decorative and industrial paint applications. | |
| 2-Ethylhexylvinylether, EHVE | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating co...view more 2-Ethylhexylvinylether, EHVE is a monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Copolymers with 2-Ethylhexyl vinyl ether are used for solvent based anti-corrosion coatings. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. view less | |
| 2-Ethylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Ethylimidazole is a selective catalyst for epoxy and urethanes reactions. 2-Ethylimidazole is used for two components epoxy systems; for modification of epoxy resins and for preparation of polyurethanes. | |
| 2-Mercaptoethanol | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Mercaptoethanol application fields include, tin type of stabilizer, chain transfer agent in polymerization processes, and anti-corrosion systems for oilfields. Mercaptoethanol is used in acrylic resin production of water-borne coatings. | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...view more 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. view less | |
| 2-Methylimidazole | BASF SE, Intermediates Division 巴斯夫中间体 | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| 2,2-Dimeththylol Propionic Acid | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | 2,2-Dimeththylol Propionic Acid, in the form of a white crystalline powder, is a pharmaceutical intermediate. This product can be used in coatings and adhesives. Its density is 1.331 g/cm3 and its flash point is 189.7 degrees Celsius. | |
| 3-Chloropropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties,...view more 3-Chloropropylmethyldimethoxysilane is a chloro / ethoxy -functional coupling agent which boils between 70-72°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropylmethyldimethoxysilane is also the raw materials for other Organo-functional silanes with methyldimethoxy. view less | Request Sample |
| 3-Chloropropyltriethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as c...view more 3-Chloropropyltriethoxysilane is a chloro / ethoxy -functional coupling agent which boils at 220°C. It is a colorless or light yellowish liquid used in epoxy resins and halogenated rubber for treated filers in order to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltriethoxysilane is also the key intermediate for other Organo-functional silanes with triethoxy. view less | Request Sample |
| 3-Chloropropyltrimethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimetho...view more 3-Chloropropyltrimethoxysilane is a chloro / methoxy -functional coupling agent which boils at 192°C. It is a colorless or light yellowish liquid used in epoxy resins to promote the properties, or used as crosslinking agent for RTV. 3-Chloropropyltrimethoxysilane is also a key intermediate for the preparation of a variety of amino-, mercapto- and methacryloyloxyorganosilanes which are used as silane coupling agents. view less | Request Sample |
| 3-(Cyclohexylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves ...view more 3-(Cyclohexylamino) propylamine is a cross linker for epoxy resins. 3-Cyclohexylaminopropylamine is suitable for two-component epoxy coatings and for epoxy-based plastic parts. 3-Cyclohexylaminopropylamine is very compatible with co-resins and improves resistance against humidity during film formation. view less | |
| 3-(Dimethylamino) propylamine | BASF SE, Intermediates Division 巴斯夫中间体 | 3-(Dimethylamino) propylamine is a building block for modification of epoxy resins. 3-(Dimethylamino) propylamine modified epoxy resins are used for cationic electro deposition coatings. | |
| 3-Methacryloxypropylmethyldimethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | 3-Methacryloxypropylmethyldimethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropylmethyldimethoxysilane is used as a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3-Methacryloxypropyltriethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | 3-Methacryloxypropyltriethoxysilane is a comonomer in radical cured resins, such as acrylic, polyester, methacrylate, and PVC. 3-Methacryloxypropyltriethoxysilane is a coupling agent for reinforced and filled polyester and acrylics. | Request Sample |
| 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan | BASF SE, Intermediates Division 巴斯夫中间体 | 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives a...view more 3,3'-Dimethyl-4,4'-diamino-dicyclohexyl-methan is a cross linker for epoxy resins, building block for polyamides and polyurethanes. 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine)is suitable for two-component epoxy coatings, for epoxy-based adhesives and epoxy composites. The hydrophobic structure of 2,2'-Dimethyl-4,4'-methylene bis(cyclohexylamine) improves the hydrolytical resistance, increases reactivity and compatibility in epoxy coatings. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division 巴斯夫中间体 | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunction...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 4,4'-Diaminodicyclo-hexylmethane | BASF SE, Intermediates Division 巴斯夫中间体 | 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balanc...view more 4,4'-Diaminodicyclo-hexylmethane is a cross linker for epoxy resins, building block for polyamides. Diaminodicyclo-hexylmethane is used for two-component epoxy coatings and for epoxy-based adhesives. Diaminodicyclo-hexylmethane ensures an optimal balance of hardness and flexibility. view less | |
| 4,4'-Methylenedianiline, MDA | BASF SE, Intermediates Division 巴斯夫中间体 | 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for elect...view more 4,4'-Methylenedianiline, MDA is a building block for polyimides, polyamideimides, polyesterimides, special cross linker agent for epoxy resins. Polyimides, polyamideinmides, and polyesterimides resins based on 4,4'-Methylenedianiline can be used for electro insulation coatings, 4,4'-Methylenedianiline is also used as epoxy cross linker for special epoxy powder coatings. view less | |
| 4,7,10-Trioxatridecan- 1,13-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for po...view more 4,7,10-Trioxatridecan- 1,13-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,7,10-Trioxatridecan-1,13-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 4,9-Dioxadodecan- 1,12-diamine | BASF SE, Intermediates Division 巴斯夫中间体 | 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coa...view more 4,9-Dioxadodecan- 1,12-diamine is a cross linker for epoxy resins, building block for polyurethanes and polyureas. 4,9-Dioxadodecan-1,12-diamine is suitable for two-component epoxy coatings and can be combined with polyisocyanate adducts for polyurea coatings. It also improves the flexibility of coatings. view less | |
| 63% DVB Monomer | Deltech Corporation | 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins wher...view more 63% DVB Monomer is a reactive monomer composed of divinylbenzene (62-65%) and ethylvinylbenzene (34-37%) isomers. Primary applications have been in synthesis of ion-exchange resins and the production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, insulting varnishes, and unsaturated polyesters. view less | |
| 80% DVB Monomer | Deltech Corporation | 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resin...view more 80% DVB Monomer is a reactive monomer composed primarily of divinylbenzene (80-83%) and ethylvinylbenzene (16-20%) isomers. Primary applications have been in synthesis of ion-exchange resins and production of unsaturated polyester resins and casting resins where DVB is used as a cross-linking agent to provide rigidity. Other applications include use in coatings, adhesives, films, and insulting varnishes. view less | |
| Acryloyl Morpholine (ACMO) | Beijing RBL Chemicals Co., Ltd. | Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and so...view more Acryloyl Morpholine (ACMO) is a homopolymer that has good retention and elongation stability. This product appears as a colorless or slightly yellow, clear liquid that is soluble in various solvents. It can provide good resistance to alkali, acids, and solvents, and be used in adhesives, UV printing inks, and industrial coatings. view less | |
| Adipic Acid | Penpet Petrochemical Trading GmbH | Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the syn...view more Adipic Acid, in the form of a white crystalline powder, is a dicarbon acid and an intermediate in the production of nylon. It can be used in adhesives, plasticizers, and as a dyestuff or coloring agent. This product is a primary intermediate for the synthesis of polyetherpolyole for polyurethane systems and for thermoplastic polyurethane. view less | |
| Alkoxylated 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and...view more Alkoxylated 2-Methyl-1,3-Propanediol is produced by Alkoxylation of 2-Methyl-1,3-Propanediol and Alkoxide. It is a colorless liquid with two primary hydroxyls. Alkoxylated 2-Methyl-1,3-Propanediol is used as a raw material in printing inks, adhesives, and paints. view less | |
| Baymedix® AP501 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® AP501 is an aliphatic NCO-terminated prepolymer based on hexamethylene diisocyanate. | |
| Baymedix® FP503 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Benzylamine | BASF SE, Intermediates Division 巴斯夫中间体 | Benzylamine is a building block for crystalline ureas. Crystalline ureas based on benzylamine act as sag control agents for stoving enamels. | |
| BEPD | Perstorp | BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less | |
| Bisomer® BDDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (M...view more Bisomer® BDDMA (1,4 Butanediol Dimethacrylate) is a low viscosity, low odour dimethacrylate monomer. It is non-toxic, non-irritating and not a sensitiser. It is free of all R risk phrases and ideal in label-free systems. This product has an inhibitor (MEHQ) content of 300-500ppm, a colour number of 100 Pt/Co max., a total polymerisable monomers amount of 99.0% min., and a molecular weight (av) of 226g/mol. Bisomer® BDDMA is an excellent reactive diluent in UV curable wood coatings due to its low viscosity. It is ideal in peroxide cured applications such as a co-agent for PP, PE, nitrile, EPDM rubbers and PVC. It offers excellent properties with PMMA, especially in acrylic flooring and synthetic marble. Bisomer® BDDMA is used in photopolymers, wire and cable coatings, adhesives and sealants. It also offers excellent compatibility with unsaturated polyesters for gel-coats, chemical fixings and anchor bolts. view less | |
| Bisomer® C13MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) ...view more Bisomer® C13MA (Isotridecyl Methacrylate) is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and excellent as a flexibilising and plasticising monomer. This product has a total polymerisable monomers (mass) of > 99.0%, a molecular weight (av) of 268g/mol, and an inhibitor (MEHQ) content of 75-125ppm. It is extremely hydrophobic and offers a low Glass Transition Temperature (Tg), hence it is an excellent flexibilising co-monomer in adhesive and sealant applications. Bisomer® C13MA is a particularly useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants and high solids acrylic polyols for automotive coatings and industrial coatings. It offers a low viscosity and low odour combined with low shrinkage on polymerisation. view less | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® DALP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This pro...view more Bismoer® DALP is a stable ester of high purity, capable of undergoing polymerisation at moderate temperatures to yield thermosetting or thermoplastic resins. It possesses valuable properties for adhesives, coatings, casting and potting compounds. This product has an ester of 99% min., an iodine number of 196gl^2/100g min., and a density @ 20°C of 1.115 to 1.121kg/l. It may also be copolymerised with a variety of common monomers, or used as a “reactive diluent”. When used as a partial replacement for styrene in cross-linking polyesters, Bisomer® DALP produces materials showing up to 25% less shrinkage on cure. Bisomer® DALP may also be employed in self-priming PVC organosols for steel coating or incorporated into EPDM rubber to improve the adhesive strength. view less | |
| Bisomer® DEGDMA HI | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters...view more Bisomer® DEGDMA HI (Diethyleneglycol Dimethacrylate) is a low viscosity aliphatic dimethacrylate monomer ideal as a co-monomer for improving hardness and mechanical properties of numerous plastics, adhesives, sealants and especially unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a refractive index @ 20°C of 1.455-1.460, a residual solvent amount of 0.8% max., and an inhibitor (MEHQ) content of 650-850ppm. It is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® DEGDMA HI is also excellent for use in the manufacture of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® DEGDMA HI offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| Bisomer® EP 100 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This ...view more Bisomer® EP 100 DMA is the dimethacrylate ester of a specifically designed block polyalkyleneglycol. Based around a 12 unit propylene oxide (PO) backbone, both ends of the chain are capped with 3 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 90-110mg KOH/g, an inhibitor (MEHQ) content of 90-120ppm, and a molecular weight (av) of 1114g/mol. Bisomer® EP100 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP100 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® EP 150 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, bo...view more Bisomer® EP 150 DMA is a dimethacrylate ester of a specifically designed block polyalkyleneglycol which has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Based around a 7 unit propylene oxide (PO) backbone, both ends of the chain are capped with 2 moles of ethylene oxide (EO) prior to esterification. This product has a saponification value of 140-160mg KOH/g, an inhibitor (MEHQ) content of 70-100ppm, and a molecular weight (av) of 736g/mol. Bisomer® EP150 DMA has the inherent ability to modify the hydrophobic / hydrophilic balance in formulated systems. Other interesting applications for Bisomer® EP150 DMA include its incorporation into electronic photoresists, photopolymer printing plates, coatings in general and most notably adhesives and sealants. Low shrinkage on polymerisation and improvement in impact strength are amongst its major advantages. view less | |
| Bisomer® HEMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an...view more Bisomer® HEMA (Hydroxyethyl Methacrylate) is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings, it is non-toxic and non-yellowing. This product has a diester (EGDMA) of 97.0%, an inhibitor (MEHQ) content of 200-240ppm, and an acid number of < 1.0mg KOH/g. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. It may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HEMA is also the major raw material for the production of long-term wear and disposable contact lenses and in turn is an ideal starting point in formulating biomedical hydrogels. view less | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...view more Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. view less | |
| Bisomer® HPMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. Thi...view more Bisomer® HPMA (Hydroxypropyl Methacrylate) monomer for special polymers. Bisomer® HPMA is used extensively in the production of acrylic polyols for automotive OEM and refinish coatings as well as industrial coatings. It is non-toxic and non-yellowing. This product has a molecular weight (av) 144g/mol, a diester (PGDMA) of 0.2% max., and a colour number of 10 Pt/Co max. It is also used as a co-monomer in styrene based unsaturated polyesters, PMMA based acrylic resins and vinyl ester formulations in anchor bolts and chemical fixings. Bisomer® HPMA may also be used in the production of emulsion polymers in combination with other commodity methacrylates and acrylates, notably for textile coatings and textile sizes. Bisomer® HPMA is particularly useful as a hydrophobic hydroxy monomer in the production of vacuum impregnation sealants for cast aluminium components. It is also extensively used in the production of flexible, UV curable photopolymer printing plates. view less | |
| Bisomer® IDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. Th...view more Bisomer® IDMA is a hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and therefore an excellent flexibilising and plasticising monomer. It is also an excellent co-monomer in adhesive and sealant applications. This product acidity (methacrylic acid) of 0.01% max., an inhibitor (MEHQ) content of 75-125ppm, and an assay (GC) of 97.0% min. Bisomer® IDMA is a useful monomer in applications such as anaerobic adhesives, vacuum impregnation sealants, high solids acrylic polyols for automotive coatings and industrial coatings. It offers low viscosity and low odour combined with low shrinkage on polymerisation. It is non-toxic, non-irritating and is not a suspected sensitiser. view less | |
| Bisomer® LMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active ...view more Bisomer® LMA hydrophobic, monofunctional methacrylate monomer with a low Glass Transition Temperature (Tg) and is excellent as a flexibiliser and plasticiser. This product has a water content of 0.1% max., a colour number of 100 Pt/Co max., and an active monomer of 97.0%. Bisomer® LMA is based on a natural form of lauryl alcohol; as C12 lauryl methacrylate the content is around 65-70 %. Bisomer® LMA is mostly used in the automotive industry for viscosity modification of lubricating oils. However, due to its hydrophobic nature and flexibilising properties, Bisomer® LMA is also extensively used in anaerobic adhesives, vacuum impregnation of aluminium castings, sealants and pressure sensitive adhesives (PSAs). view less | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponific...view more Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). view less | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecula...view more Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. view less | |
| Bisomer® PEG 200 DMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsa...view more Bisomer® PEG 200 DMA (Polyethyleneglycol 200 Dimetha-crylate) is a low viscosity aliphatic dimethacrylate monomer ideally used as a co-monomer for improving mechanical properties and chemical resistance of plastics, polyolefins, adhesives, sealants, unsaturated polyesters and especially acrylic polymers such as acrylic sheet and acrylic flooring. This product has an inhibitor (MEHQ) content of 300-500 ppm, an active monomer of 99.0%, and a molecular weight (ac) of 338g/mol. Bisomer® PEG 200 DMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and a non-irritant. It is ideal in dibenzoyl peroxide (BPO) cured applications. Bisomer® PEG 200 DMA is also excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings and is also an essential component in many anaerobic adhesives and sealants. Bisomer® PEG 200 DMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties wh...view more Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). view less | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...view more Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. view less | |
| Bisomer® TEGDMA | GEO Specialty Chemicals, Inc. TRIMET Products Group | Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of ...view more Bisomer® TEGDMA is a low viscosity aliphatic dimethacrylate monomer that is ideal as a co-monomer for improving hardness and mechanical properties in plastics, polyolefins, adhesives and sealants. It is especially used to improve mechanical properties of unsaturated polyesters and acrylic polymers such as acrylic sheet and acrylic flooring. This product has a total polymerisable monomers of 99% min., a molecular weight (av) of 286g/mol, and an inhibitor (MEHQ) content of 250-400ppm. Bisomer® TEGDMA is an excellent reactive diluent in peroxide curable formulations due to its low viscosity and ease of handling. It is non-toxic, non-sensitising and non-irritating. It is ideal in dibenzoyl peroxide (BPO) cured applications and excellent for use in the production of UV cured photopolymers such as flexographic printing plates. It is widely used in photopolymers, wire and cable coatings, adhesives and sealants. Bisomer® TEGDMA offers excellent compatibility with unsaturated polyesters for chemical fixings and anchor bolts. view less | |
| Brassylic Acid (DC13T) | Cathay Industrial Biotechnology | Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high ...view more Brassylic Acid (DC13T), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)11COOH. It has recommended applications in high performance polyamides/nylon, hot melt adhesives, and more. view less | |
| C-2090 | Qingdao Xinyutian Chemical Co., Ltd. | C-2090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, cold weather resistance, hydrolysis resistance, transparency and mechanical properties commonly used in oil seal materials. | |
| C-2390 | Qingdao Xinyutian Chemical Co., Ltd. | C-2390 is a prepolymer with a 80 Shore A hardness. This product has strong weatherability, high temperature resistance, hydrolysis resistance and mechanical properties commonly used in oil seal materials. | |
| C-3090 | Qingdao Xinyutian Chemical Co., Ltd. | C-3090 is a prepolymer with a 90 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| C-6090 | Qingdao Xinyutian Chemical Co., Ltd. | C-6090 is a prepolymer with a 90-95 Shore A hardness. This product has strong weatherability, high temperature resistance, oil resistivity and mechanical properties commonly used in oil seal materials. | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–10 A | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products...view more Capromer™ PD1–10 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD1–20 A | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO product...view more Capromer™ PD1–20 A offers low color, good hydrolytic stability and weatherability. During manufacturing, PolyCLO provides an improved processability due to the low viscosity, high purity, exact functionality, and consistent reactivity. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division 巴斯夫中间体 | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| Charmor™ PM15 | Perstorp | Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for pl...view more Charmor™ PM15 a white super-micronized Pentaerythritol derivative in powder form.This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM15 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. view less | |
| Charmor™ PM40 | Perstorp | Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PM40 is a whiter polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 98%. view less | |
| Charmor™ Pro DP40 C40 | Perstorp | Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It ha...view more Charmor™ Pro DP40 C40 offers a rich carbon source for intumescent coatings and plastics. Charmor™ Pro DP40 C40 is a micronized pentaerythritol partly based on renewable raw material based on a traceable mass-balance concept certified with ISCC PLUS. It has the same quality and technical properties as the standard Charmor™ PM40. view less | |
| Charmor™ PT40 | Perstorp | Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for ...view more Charmor™ PT40 is a white polyhydric alcohol in powder form that is rich in carbon. This product is a component in the formation of a thick fire resistant char barrier when intumescent coatings are exposed to high temperatures. In intumescent systems for plastics, Charmor™ PM40 is used as carbon source for halogen free systems demanding lower smoke release and non-toxic fumes. This product has a minimum monopentaerythritol content of 87%. view less | |
| Cyclohexyl vinyl ether, CHVE | BASF SE, Intermediates Division 巴斯夫中间体 | Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vin...view more Cyclohexyl vinyl ether, CHVE monomer for copolymers with vinyl chlorides (Laroflex®) or TFCE 1,1,2-trifluoro-2-chloroethene. Vinyl ethers form alternating copolymers via charge transfer-complex polymerization with electron-deficient monomers, such as vinyl chlorides, maleic anhydride, TFCE, resulting in better solubility and flexibility. Copolymers with Cyclohexyl vinyl ether are used for solvent based anti-corrosion coatings. view less | |
| Desmocap® 11 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmocap® 11 has a viscosity at 23℃ of 100,000 ± 25,000. It is a branched polymer with ether and urethane groups, used as a raw material for use in the flexiblization of epoxy resins and the formulation of flexible coatings and sealing compounds. Desmocap...view more Desmocap® 11 has a viscosity at 23℃ of 100,000 ± 25,000. It is a branched polymer with ether and urethane groups, used as a raw material for use in the flexiblization of epoxy resins and the formulation of flexible coatings and sealing compounds. Desmocap® 11 can be used to formulate curable, liquid, solvent-free polyurethane systems. The polyamines normally used with epoxy resins are suitable curing agents. view less | |
| Desmocap® 12 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmocap® 12 is a linear polymer with ether and urethane groups, used as a raw material for the flexiblization of epoxy resins and in the formulation of flexible coatings and sealants. This product has a viscosity at 23°C of 40,000 ± 12,000. Desmocap® 12 ...view more Desmocap® 12 is a linear polymer with ether and urethane groups, used as a raw material for the flexiblization of epoxy resins and in the formulation of flexible coatings and sealants. This product has a viscosity at 23°C of 40,000 ± 12,000. Desmocap® 12 can be used to formulate curable, liquid, solvent-free polyurethane systems. The polyamines normally used with epoxy resins are suitable curing agents. view less | |
| Desmodur® E 1160 MPA/X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity...view more Desmodur® E 1160 MPA/X is an aromatic polyisocyanate prepolymer based on toluene diisocyanate used in the formulation of moisture-curing, one-pack polyurethane coatings. It has an NCO content of 5.4 ± 0.3%, a non-volatile matter of 60.0 ± 2.0, a viscosity (23°C) of 550 ± 200, and a color (Iodine) of ≤ 3. Desmodur® E 1160 MPA/X is suitable for use in the following applications: wood coatings, e.g. for parquet flooring, wall and ceiling paneling, boats and furniture; impregnating agents for mineral building material. Clear impregnating systems based on Desmodur® E 1160 MPA/X provide surfaces with long-term protection against moisture, oil, fuels, aggressive chemicals and mechanical damage. view less | |
| Desmodur® E 22 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible a...view more Desmodur® E 22 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. It can be used in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, roof and concrete sealers and rubber granules. This product has an NCO content of 8.6 ± 0.3%, a viscosity at 23°C of 2,800 ± 400 mPa·s, and an equivalent weight of 472-506. Desmodur® E 22 is suitable for the flexibilization of Desmodur® E 21/E 23 or similar products and as a binder for rubber granules. Desmodur® E 22 is also suitable for use in the formulation of solvent-free moisture-curing one-component adhesives or in combination with Baycoll to formulate two-component adhesives. These can be used to bond many materials, e.g. wood, metal and plastic. view less | |
| Desmodur® E 3265 MPA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile...view more Desmodur® E 3265 MPA/SN is an aliphatic polyisocyanate prepolymer based on hexamethylene diisocyanate (HDI). It is ideal for use in the formulation of moisture-curing, one-component polyurethane coatings with good weather stability. It has an non-volatile content of 65.0 ± 2.0%, a color value (Iod) of ≤ 4, and a monomeric HDI of < 0.5%. Desmodur® E 3265 MPA/SN is suitable for use in the formulation of weather-stable and colorfast outdoor coatings with very good resistance to solvents, abrasion and chemicals. view less | |
| Desmodur® LS 2424 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 ...view more Desmodur® LS 2424 is a monomeric diphenylmethane diisocyanate with high 2,4'-isomer content. It is used in the formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Desmodur® LS 2424 is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature (Desmodur® 44 M, Desmodur® 44 MC). This product has a vapor pressure at 20°C (MDI) of < 10^-5 hPa, a phenyl isocyanate content of max. 10ppm, and a degree of purity (MG 250) of min. 99.5% by wt. view less | |
| Desmodur® XP 2617 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2617 is a largely linear NCO prepolymer based on hexamethylene diisocyanate. It is used in combination with suitable polyether polyols as a co-reactant for polyurethane reactive systems when polyfunctional (branched) and aromatic isocyanate c...view more Desmodur® XP 2617 is a largely linear NCO prepolymer based on hexamethylene diisocyanate. It is used in combination with suitable polyether polyols as a co-reactant for polyurethane reactive systems when polyfunctional (branched) and aromatic isocyanate components cannot be used. Care must be taken during compounding, transfer, etc. to exclude moisture as even the slightest traces of moisture adversely affect storage stability. It must be ensured that the containers including those that are empty are kept sealed. Above all, contact with water must be prevented as it reacts with Desmodur® XP 2617 to form polyureas and carbon dioxide. view less | |
| Diacetone Acrylamide (DAAM) | Beijing RBL Chemicals Co., Ltd. | Diacetone Acrylamide (DAAM) is a monomer capable of forming polymers and copolymers with exceptional ease, because of its reactivity and solubility characteristics. This product appears as a white powder or crystalline flake, and it can be used in water-b...view more Diacetone Acrylamide (DAAM) is a monomer capable of forming polymers and copolymers with exceptional ease, because of its reactivity and solubility characteristics. This product appears as a white powder or crystalline flake, and it can be used in water-borne coatings and adhesives. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division 巴斯夫中间体 | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| Dicyclopentadiene High Purity | Zibo Luhua Hongjin New Material Co., Ltd. | Dicyclopentadiene High Purity is a colorless liquid. This product is most commonly used in polyester resin applications. | |
| Diethanolamine, pure | BASF SE, Intermediates Division 巴斯夫中间体 | Diethanolamine, pure is a neutralisation agent for water based coatings, building block for the modification of epoxy resins and polyurethanes. Diethanolamine modified epoxy resins are used for cationic electro deposition coatings. | |
| Diethylene triamine | BASF SE, Intermediates Division 巴斯夫中间体 | Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic ele...view more Diethylene triamine is a cross linker for epoxy resins, building block to modify epoxy resins. Diethylene triamine is used for two-component epoxy coatings and for epoxy composites. Modified epoxy resins with diethylene triamine are used for cationic electro deposition coatings (CED-coating). view less | |
| Diethyleneglycol divinyl ether, DVE-2 | BASF SE, Intermediates Division 巴斯夫中间体 | Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based ...view more Diethyleneglycol divinyl ether is a reactive diluent for unsaturated poly-esters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Diethyleneglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. with no labeling, no risk phrases . view less | |
| Diisopropanolamine | BASF SE, Intermediates Division 巴斯夫中间体 | Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisoprop...view more Diisopropanolamine is a neutralization agent for anionic stabilized resins, building block for polyurethanes. Diisopropanolamine is suitable for waterborne stoving enamels based on polyesters, alkyds and acrylic resins (secondary dispersions). Diisopropanolamine supports the film forming of stoving enamels. view less | |
| Dipropylene Glycol Diacrylate (DPGDA) | Beijing RBL Chemicals Co., Ltd. | Dipropylene Glycol Diacrylate (DPGDA) is an acrylate monomer that has low viscosity, low volatility, fast curing, and good dilution. This product appears as a clear liquid, and it can be used in adhesives, inks, and coatings. | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc. TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| Dynasylan® 40 | Evonik Operations GmbH, BL Silanes | Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt...view more Dynasylan® 40 is a ethyl silicate with a silicon dioxide content of approximately 40 - 42 % upon complete hydrolysis (the Si content of Dynasylan® 40 is calculated as SiO2). Dynasylan® 40 is formed in the presence of water from tetraethyl silicate (Si[OEt]4) by partial hydrolysis of the ethoxy groups to hydroxyl groups and subsequent condensation with formation of siloxane bonds (-Si-O-Si-). Dynasylan® 40 is a colorless, low-viscosity liquid with an SiO2 content of 40% (the Si content of Dynasylan® 40 is calculated as SiO2). The polysilicic acids still have a sufficient content of ethoxy groups which can be activated by acid- or base-catalyzed hydrolysis. Condensation starts even during hydrolysis, with the formation of relatively large polymeric molecules. During storage of these hydrolysates, condensation continues until a gel is formed, where the rate depends on the degree of hydrolysis. The action of the hydrolysates as binders is based on the continuation of the hydrolysis with subsequent gelation and dehydration to give polymeric SiO2 structures. view less | |
| Dynasylan® A | Evonik Operations GmbH, BL Silanes | Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-...view more Dynasylan® A is the ethyl ester of orthosilicic acid. In the literature it is frequently also referred to under the name TEOS (tetraethoxysilane). Dynasylan® A is a colourless, low-viscosity liquid with SiO2 content of 28.5%. Use requires acid- or alkali-catalysed hydrolysis. Since all 4 ethoxy groups are able to participate in this reaction, Dynasylan® A is regarded as tetrafunctional. Hydrolysis leads to silanol groups which, in a subsequent condensation reaction, form very stable siloxane bonds (-Si-O-Si-). Condensation starts before hydrolysis is complete. During storage of these hydrolysates condensation, continues until a gel is formed. The rate of gelation depends on the concentration of water. view less | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less | |
| Empeyol E1000/2E1000 | Manali Petrochemical Ltd. | Empeyol E1000/2E1000 is a clear viscous liquid dihydroxy polyether polyol. This product is used in elastomers, coatings, adhesives, sealants, prepolymers and one shot formulations. This product has a hydroxyl value range of 105-115 mgKOH/g and a maximum v...view more Empeyol E1000/2E1000 is a clear viscous liquid dihydroxy polyether polyol. This product is used in elastomers, coatings, adhesives, sealants, prepolymers and one shot formulations. This product has a hydroxyl value range of 105-115 mgKOH/g and a maximum viscosity of 180 cps at 25°C. view less |
