UL Prospector

Success!

Successfully saved your search
246 Results
2- ethyl Aluminum Hexahydric Zhejiang Zhongming Chemical Science and Technology Co., Ltd. 2- ethyl Aluminum Hexahydric is a white and light powder that is odorless, non-toxic, and inexplosive. It is insoluble in water, but soluble in organic hydrocarbon solvents. This product can be used as a thickener in printing inks and stabilizer in paints...view more 2- ethyl Aluminum Hexahydric is a white and light powder that is odorless, non-toxic, and inexplosive. It is insoluble in water, but soluble in organic hydrocarbon solvents. This product can be used as a thickener in printing inks and stabilizer in paints. view less
Acetylated Distarch Ddipate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive.
Acetylated Distarch Phosphate Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significan...view more Acetylated Distarch Phosphate is a fine white to off white powder with characteristic starch taste and odor. Compared with the original starch, the solubility, swelling power and transparency were significantly increased, the aging tendency was significantly decreased, and the freezing stability was improved. This product is heat-resistant and acid-resistant. It is used it as thickening agent in wallpaper adhesive. view less
ADDAPT® AS 400 ADDAPT Chemicals BV ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings.
ADDITOL® VXW 6360 Allnex ADDITOL® VXW 6360 is a polyurethane thickener for air-drying, aqueous coating systems. It has excellent rheologic properties, resulting in improved flow and leveling, film-build and brushability. Request Sample
ADDITOL® VXW 6388 Allnex ADDITOL® VXW 6388 is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints and anti-corrosive pain...view more ADDITOL® VXW 6388 is a polyurethane thickener for air-drying, aqueous coating systems. It is used for thickening and modification of flow properties of waterborne paints in the middle shear area e.g. gloss paints, dispersion paints and anti-corrosive paints. view less Request Sample
ADDITOL® XL 280 Allnex ADDITOL® XL 280 is a modified montmorrilonite clay rheology control/thickener additive. Request Sample
ADDITOL® XL 6557 Allnex Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...view more Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. view less Request Sample
AERODISP® W 7330 N Evonik Operations GmbH, BL Coating Additives AERODISP® W 7330 N is a water-based dispersion of AEROSIL® fumed silica with a high solids content and an alkaline pH value. It is used in clear and pigmented waterborne sealants: efficient rheology control and reinforcement agent while maintaining high t...view more AERODISP® W 7330 N is a water-based dispersion of AEROSIL® fumed silica with a high solids content and an alkaline pH value. It is used in clear and pigmented waterborne sealants: efficient rheology control and reinforcement agent while maintaining high transparency, excellent dispersant for pigments, mixes easily with arylic, polyurethane and other waterborne latexes. view less Request Sample
AEROSIL® 200 Evonik Operations GmbH, BL Coating Additives AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking chara...view more AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g. With this product, rheology and thixotropy control of liquid systems, binders, and polymers is possible easily. It is also used to improve free flow and anti-caking characteristics of powders as well as an anti-settling, thickening, and anti-sagging agent. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica' and holds a COSMOS certification. view less Request Sample
AEROSIL® 300 Evonik Operations GmbH, BL Coating Additives AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of ap...view more AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g. AEROSIL® 300 has shown excellent transparency and rheology and thixotropy control of liquids, binders, and polymers. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less Request Sample
AEROSIL® 380 Evonik Operations GmbH, BL Coating Additives AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and a...view more AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g. AEROSIL® 380 has excellent transparency and can be used for rheology and thixotropy control of liquids, binders, and polymers. It can also be used for reinforcement and as flow aid. As ingredient it can be used in a broad variety of applications, like lipsticks, sulfate-free shampoos, mascara. The product is listed with the INCI-name 'Silica'. view less Request Sample
AEROSIL® MOX 80 Evonik Operations GmbH, BL Coating Additives AEROSIL® MOX 80 is a cofumed oxide consisting of silicon dioxide and approximately 1 % aluminium oxide, manufactured using the AEROSIL®-process. Request Sample
AEROSIL® R 812 S Evonik Operations GmbH, BL Coating Additives AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be use...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. AEROSIL® R 812 S can be applied in nail polish systems as an anti-settling agent, for the stabilization of pigments. In the personal care industry the AEROSIL® R 812 S can be used as a free flow agent and rheology controller. It is well known in products like styling agents (dry water) and dry shampoos. Using AEROSIL® R 812 S is also recommended for sprays (e.g. antiperspirant) and powder-to-cream applications (e.g. lipsticks). Its INCI-name is 'Silica silylate' view less Request Sample
AEROSIL® R 812 S Evonik Operations GmbH, BL Coating Additives AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. It is used in paints and coatings, adhesives and sealants, and silicone rubber. AEROSIL® R 812 S can be applied in coatings asystems as an anti-settling agent, for the stabilizat...view more AEROSIL® R 812 S fumed silica after treated with HMDS based on AEROSIL® 300. It is used in paints and coatings, adhesives and sealants, and silicone rubber. AEROSIL® R 812 S can be applied in coatings asystems as an anti-settling agent, for the stabilization of pigments, and to enhance the effect of corrosion protection. It also can be easily be incorporated into silicone rubber formulations and improves their mechanical and optical properties. view less Request Sample
AEROSIL® R 816 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed...view more AEROSIL® R 816 is hydrophilic and hydrophobic at the same time, and is a PEG-free way to stabilize (oil-in-water) emulsions. It is even bringing some more benefits in sensory modification like reduced gloss, improved spreadability, less tackiness, delayed dry feel. AEROSIL® R 816 is PCPC-listed as 'Silica cetyl silylate'. view less Request Sample
AEROSIL® R 972 Evonik Operations GmbH, BL Coating Additives A hydrophobic fumed silica aftertreated with dimethyldichlorosilane based on a hydrophilic fumed silica with a specific surface area of 130 m²/g. Request Sample
AEROSIL® R 972 V Evonik Operations GmbH, BL Coating Additives AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. Request Sample
AO-4-1 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-4-1 is a light yellow transparent liquid that has an aluminum content of 7.2±0.2%. This product is combustible, odorless, and easily soluble in benzene, xylene, toluene, etc. It is often used as a gelling agent in printing inks.
AO-4-2 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-4-2 is a light yellow transparent liquid that has an aluminum content of 5.7±0.2%. This product is combustible, odorless, and easily soluble in benzene, xylene, toluene, etc. It is often used as a gelling agent in printing inks.
AO-5-1 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-5-1 is a light yellow transparent liquid that has an aluminum content of 9.0±0.3%. This product is non-toxic, odorless, and easily soluble in alcohol, ketone, etc. It is often used as a gelling agent in printing inks.
AO-5-2 Zhejiang Zhongming Chemical Science and Technology Co., Ltd. AO-5-2 is a light yellow transparent liquid that has an aluminum content of 8.0±0.3%. This product is non-toxic, odorless, and easily soluble in alcohol, ketone, etc. It is often used as a gelling agent in printing inks.
AT-152 Antex Chemicals (Zhongshan) Limited AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is ...view more AT-152 is a high-performance modified acrylic polymer that appears as a milky, white liquid. This product is an alkali swellable associate urethane thickener emulsion that can be used as a co-thickener in thickening applications where reduction in sag is desired, particularly in paint, pigment printing and paper printing applications. view less
AT-166 Antex Chemicals (Zhongshan) Limited AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation indus...view more AT-166 is an acid-containing, modified acrylic polymer with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coatings, pigment printing, and adhesive reformation industries. view less
AT-288 Antex Chemicals (Zhongshan) Limited AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation ...view more AT-288 is an acid-containing, all acrylic copolymer emulsion with very low viscosity that appears as a milky, white liquid. This product can be used as a thickening agent in emulsion paint, textile back coating, pigment printing, and adhesive reformation industries. view less
BENATHIX® Elementis 海名斯特殊化学 BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mix...view more BENATHIX® rheological additive is an extremely efficient, modified bentonite clay for solventborne unsaturated polyester paint and coating systems. This organoclay is developed to impart thixotropy and drainage control and does not require high-shear mixing equipment unlike conventional organoclays. view less
BENGEL® 434 Elementis 海名斯特殊化学 BENGEL® 434 rheological additive is a general purpose solvent organoclay (tetra-alkyl ammonium bentonite) designed for low to medium polarity aliphatic and aromatic coating systems. It also works fine in selective high polarity systems.
BENGEL® 818 Elementis 海名斯特殊化学 BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufac...view more BENGEL® 818 is a solvent that demonstrates excellent dispersibility compared to conventional organoclay. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, will provide great flexibility in manufacturing process. view less
BENGEL® 828 Elementis 海名斯特殊化学 BENGEL® 828 is a rheological additive greatly simplifies the formulation and manufacture of paint systems contain moderate to high polarity solvents such as ketones, esters, glycol ethers, ether esters, alcohol.
BENGEL® 958 Elementis 海名斯特殊化学 BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufactu...view more BENGEL® 958 is a solvent that demonstrates easier dispersibility compared to conventional organoclays. It provides good thixothropy, sag resistance, and anti settling properties. It is an easy dispersible grade, and provides great flexibility in manufacturing procedures. view less
BENGEL® 988 Elementis 海名斯特殊化学 BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate ...view more BENGEL® 988 rheological additive is an organic derivative of a bentonite clay. It is designed for use in low to high polarity systems containing aliphatic solvents, aromatic solvents, ketones, esters, glycol ethers and alcohols. It is easy to incorporate and can be added dry to the pigment grinding process without chemical activator or the preparation of a pregel. view less
BENTONE® 27 Elementis 海名斯特殊化学 BENTONE® 27 rheological additive is an organic solvent derivative of a hectorite clay. It is designed for moderate to high-polarity organic systems and for synthetic binders.
BENTONE® 34 Elementis 海名斯特殊化学 BENTONE® 34 is an organic solvent derivative of a bentonite clay. This rheological additive is designed for low to intermediate polarity organic systems.
BENTONE SD® -1 Elementis 海名斯特殊化学 BENTONE SD®-1 rheological additive is an organic derivative of a bentonite clay. It is a very easily dispersible additive for systems containing primarily aliphatic and other non-polar to medium-polarity solvents.
BENTONE SD® -2 Elementis 海名斯特殊化学 BENTONE SD®-2 rheological additive is an organic derivative of a bentonite clay. It is designed for use in moderate to high polarity systems containing solvents such a ketones, esters, glycol ethers and alcohols.
BK®-127 Hangzhou Jingyi Chemical Co., Ltd. BK®-127 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, primer paint, and ink...view more BK®-127 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, primer paint, and ink applications. view less
BK-127 LUKEM D.O.O. BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...view more BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. view less
BK®-138 Hangzhou Jingyi Chemical Co., Ltd. BK®-138 is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, alkyd paint, inks, and adhesive applications.
BK®-283 Hangzhou Jingyi Chemical Co., Ltd. BK®-283 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in ink and adhesive applications.
BK®-388 Hangzhou Jingyi Chemical Co., Ltd. BK®-388 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.85 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in decorative paint, industrial paint, and ink applications.
BK®-500 Hangzhou Jingyi Chemical Co., Ltd. BK®-500 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.5 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, ink, and adhesive applications.
BK®-500A Hangzhou Jingyi Chemical Co., Ltd. BK®-500A is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.8 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, and ink applications...view more BK®-500A is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.8 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, and ink applications. view less
BK®-500B Hangzhou Jingyi Chemical Co., Ltd. BK®-500B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.85 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in decorative paint, industrial paint, and ink applications.
BK®-883 Hangzhou Jingyi Chemical Co., Ltd. BK®-883 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, ink, and adhesive applications.
BK-883 LUKEM D.O.O. BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...view more BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. view less
BK®-883B Hangzhou Jingyi Chemical Co., Ltd. BK®-883B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive appli...view more BK®-883B is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications. view less
BK®-884 Hangzhou Jingyi Chemical Co., Ltd. BK®-884 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, road paint, inks, and adhesive applicat...view more BK®-884 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, road paint, inks, and adhesive applications. view less
BK®-884A Hangzhou Jingyi Chemical Co., Ltd. BK®-884A is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, wooden paint, inks, and adhesive applications...view more BK®-884A is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, wooden paint, inks, and adhesive applications. view less
BK–884A LUKEM D.O.O. BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...view more BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. view less
BK®-886 Hangzhou Jingyi Chemical Co., Ltd. BK®-886 is an organoclay that appears as a light white, free-flowing powder. This product has a density of 1.67 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, baking paint, inks, and adhesive applications.
BK®-886B Hangzhou Jingyi Chemical Co., Ltd. BK®-886B is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in alkyd paint, wooden paint, and ink applications.
BK®-886C Hangzhou Jingyi Chemical Co., Ltd. BK®-886C is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive appli...view more BK®-886C is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications. view less
BK®-886D Hangzhou Jingyi Chemical Co., Ltd. BK®-886D is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, inks, and adhesive applica...view more BK®-886D is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.65 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, industrial paint, inks, and adhesive applications. view less
BK®-922 Hangzhou Jingyi Chemical Co., Ltd. BK®-922 is an organoclay that appears as a white, free-flowing powder. This product has a density of 1.6 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, primer paint, inks, and adhesive applications.
BK®-923 Hangzhou Jingyi Chemical Co., Ltd. BK®-923 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, baking paint, inks, and adhesive applic...view more BK®-923 is an organoclay that appears as a light yellow, free-flowing powder. This product has a density of 1.7 g/cm3 and a moisture content of ≤3.5%. It is most commonly used as an additive in anti-corrosion paint, baking paint, inks, and adhesive applications. view less
BK-923 LUKEM D.O.O. BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is ...view more BK-923 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, bituminous, anti-corosion, silica, baking, chlorinated rubber, marine, and solvent epoxy. It is also used in inks, adhesives, putties, sealants, varnishes, and nitro lacquer. view less
BP®-183 Zhejiang Huate New Material Co., Ltd. BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also comm...view more BP®-183 is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low and middle polar solvent systems. It is also commonly used in mixed paints, paint fillers, sealants, and printing inks. view less
BP®-183B Zhejiang Huate New Material Co., Ltd. BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is al...view more BP®-183B is a solvent based organoclay additive with rheological properties that appears as a light yellow, free flowing powder. This product provides desirable compatibility and thickening abilities in low, middle and high polar solvent systems. It is also commonly used in mixed paints, bitumen paints, chlorinated rubber paints, anticorrosion paints, epoxy paints, sealants, and printing inks. view less
BP®-184 Zhejiang Huate New Material Co., Ltd. BP®-184 is a solvent based organoclay additive with rheological properties that appears as a white, free flowing powder in appearance. This product is easy to disperse, and is commonly used in sealants, high-grade paints, and printing inks.
BP®-186 Zhejiang Huate New Material Co., Ltd. BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and print...view more BP®-186 is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. view less
BP®-186B Zhejiang Huate New Material Co., Ltd. BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and prin...view more BP®-186B is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems and appears as a white, free flowing powder. It is also commonly used in sealants, transparent paints, and printing inks. view less
BP®-186C Zhejiang Huate New Material Co., Ltd. BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, an...view more BP®-186C is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a light yellow, free flowing powder. It is also commonly used in sealants, furniture paints, and printing inks. view less
BP®-186D Zhejiang Huate New Material Co., Ltd. BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing in...view more BP®-186D is a solvent based organoclay additive with rheological properties. This product is applicable to low and middle polar solvent systems, and appears as a white, free flowing powder. It is commonly used in sealants, superior paints, and printing inks. view less
BP®-188L Zhejiang Huate New Material Co., Ltd. BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white,...view more BP®-188L is a water-based bentonite rheological additive created from specially processed high purity hydrophilic montmorillonite. This product has high heat resistance and bio-stability in addition to thixotropic properties, and appears as a light white, free-flowing powder. It is commonly used in water-based ink, water-based coatings, and emulsion paints. view less
BP®-283 Zhejiang Huate New Material Co., Ltd. BP®-283 is a tetraallkyl ammonium bentonite based organoclay used in solvent-based systems of low to medium polarity. This product is also used as an anti-sagging agent in inks and adhesives.
BP®-286 Zhejiang Huate New Material Co., Ltd. BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks...view more BP®-286 is a solvent based organoclay with rheological properties. This product appears as a white, free flowing powder, and provides strong thickening capabilities in addition to high transparency. It is commonly used in superior paints and printing inks. view less
BP®-500 Zhejiang Huate New Material Co., Ltd. BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is co...view more BP®-500 is a solvent based organoclay with rheological properties. This product is used to dissolve solvents and increase viscosity and thixotropy in resin systems. It provides a light color and high transparency in addition to colloid fineness, and is commonly applied in paints, coatings, inks, and adhesives. view less
BP®-923 Zhejiang Huate New Material Co., Ltd. BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, a...view more BP®-923 is a solvent based organoclay with rheological properties that is applied in low, middle and high polar solvent systems. This product provides anti-flowing and thixotropic effects in addition to high dispersion. It is applicable to epoxy paints, anti-corrosion paints, and inks. view less
CAB-O-SIL® EH5 Cabot Corporation - Additives CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less
CAB-O-SIL® TS610 Cabot Corporation - Additives CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective ...view more CAB-O-SIL® TS610 is a low surface area fumed silica that has been surface modified with dimethyldichlorosilane. As a thickener, this product is well suited for use in non-polar to medium polarity inks, coatings, and adhesives. It is also highly effective as free-flow additive for moisture-sensitive powder systems. view less
CAB-O-SPERSE® PG001 Cabot Corporation - Additives CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product ...view more CAB-O-SPERSE® PG001 is a specialty fumed silica dispersion. It is formulated to provide a microporous coating for inkjet media. It can be used on both porous and non-porous media, is fast drying, has good mechanical integrity and good gloss. This product is well suited for use in inkjet inks. view less
Carboxymethyl Cellulose (CMC) Shijiazhuang Metal Billion Import&Export Co., Ltd. Carboxymethyl Cellulose (CMC), in the form of a white powder, is a binding agent. This product can be used in paints and printing applications. It can also be used as a coagulant and as an agent to retain water.
CLAYTONE 34 BYK 毕克 CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...view more CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. view less
CLAYTONE® 40 BYK 毕克 CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...view more CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. view less
CLAYTONE® AF BYK 毕克 CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...view more CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. view less
CLAYTONE® APA BYK 毕克 CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and ...view more CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. view less
CLAYTONE® HT BYK 毕克 CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...view more CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. view less
CLAYTONE® HY BYK 毕克 CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting ...view more CLAYTONE® HY is a modified montmorillonite designed for use in low to medium polarity printing inks. CLAYTONE® HY demonstrates high gelling efficiency, increases the viscosity and yield value, prevents pigment agglomeration, and settling, reduces misting and allows the ink manufacturer to control tack viscosity. view less
CLAYTONE-40 BYK 毕克 CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior.
CLAYTONE-EM BYK 毕克 CLAYTONE-EM is a high efficiency rheological additive suitable for use in synthetic base fluids and all-oil systems to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-ER BYK 毕克 CLAYTONE-ER is a high efficiency rheological additive suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE-IMG 400 BYK 毕克 CLAYTONE-IMG 400 is a general purpose rheological additive for diesel and mineral oil based drilling fluids to increase the carrying capacity and hole cleaning capabilities.
CLAYTONE-MPZ BYK 毕克 CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...view more CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. view less
CLAYTONE-SF BYK 毕克 CLAYTONE-SF is an ultra high efficiency rheological suitable for use in mineral oil and synthetic base fluids to increase the carrying capacity and hole cleaning capabilities. The product is also an effective suspension agent for polymer slurries.
CLAYTONE®-VZ BYK 毕克 CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally ...view more CLAYTONE®-VZ is a rheology additive in powder form based on an organophilic phyllosilicate especially for polar as well as for medium-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE®-VZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. Using the additive produces thixotropic flow behavior, and therefore results in significant improvement to the anti-sagging properties while at the same time maintaining good leveling. This also optimizes storage stability, and prevents pigments and fillers from settling. view less
DA-40A Antex Chemicals (Zhongshan) Limited DA-40A is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste.
DA-40N Antex Chemicals (Zhongshan) Limited DA-40N is an ammonium-based, all acrylic copolymer that appears as a yellowish solution. This product can be used as a dispersant in the paint industry, and exhibits excellent dispersant properties for pigment paste.
Decoflux DP R 12 Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease visco...view more Decoflux DP R 12 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. view less
Decoflux DP R 24 Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosi...view more Decoflux DP R 24 is an auxiliary for adjusting the rheology and printing properties of ink media. This product is solvent-based and insoluble in water. It can be used to protect against drying inks out, even at high temperatures, and will decrease viscosity variations in the end product. view less
DeuRheo 201P Elementis 海名斯特殊化学 DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks...view more DeuRheo 201P is used as a dispersed polyethylene wax slurry, convenient and easy to disperse as an anti-settling agent. Application areas are alkyd / amine baking, acrylic acid / amine baking, epoxy resin, vinyl, polyurethane coatings, solvent-based inks and aluminum paint. view less
DeuRheo 229 Elementis 海名斯特殊化学 DeuRheo 229 is pre-dispersed in a solvent of polyethylene amine wax, and has anti-settling of pigments and fillers in the coating system with a anti-sagging effect.
DeuRheo WT-102 Elementis 海名斯特殊化学 DeuRheo WT-102 is an aqueous associative thickener based on polyurethane. It provides higher viscosity at low shear rate.
DeuRheo WT-105A Elementis 海名斯特殊化学 DeuRheo WT-105A is an aqueous associative thickener based on polyurethane. Provide thickening and flowing.
DeuRheo WT-108 Elementis 海名斯特殊化学 DeuRheo WT-108 is a non-ionic associative thickener (NiSAT) suitable for use in aqueous systems. It provides medium shear viscosity and is compatible with fluidity. This product is designed to be free of tin, APEO and organic solvents.
DeuRheo WT-108F Elementis 海名斯特殊化学 DeuRheo WT-108F is a nonionic synthetic associative thickener (NiSAT) for aqueous applications to increase medium shear viscosity and provide good flowing. It is designed to be free of Tin, APEO and organic solvents.
Dimer Acid Anhui Elite Industrial Co., Ltd Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhe...view more Dimer Acid is a non-toxic, non-volatile, viscous, transparent acid which can dissolve in most organic solvents, but is water insoluble. This product has a viscosity between 6000 and 8500 and a density of 0.932 g/cm3. Dimer Acid provides viscosity and adhesion to plastic bump version of printing inks. view less
DISPERBYK®-2013 BYK 毕克 DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...view more DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. view less
FR50 Sino-American Pigment Systems, Inc. FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...view more FR50, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 50 and 52 degrees Celsius. view less
FR52 Sino-American Pigment Systems, Inc. FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...view more FR52, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 52 and 54 degrees Celsius. view less
FR54 Sino-American Pigment Systems, Inc. FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low o...view more FR54, in the form of a white solid at ambient temperature, is a fully refined paraffin wax. This product is thermoplastic in nature and can be used in art waxes. It has a clearly defined crystal structure and a tendency to be hard and brittle with low oil content and good stability. Its melting point is between 54 and 56 degrees Celsius. view less