UL Prospector

Success!

Successfully saved your search
50 Results
Activated Carbons - Air Treatment JACOBI GROUP Activated carbon is a proven, simple solution to the control emissions of volatile organic compounds to the atmosphere. It can remove a wide range of organic compounds and is widely used in cost-effective filtration systems. The EcoSorb™ range can effecti...view more Activated carbon is a proven, simple solution to the control emissions of volatile organic compounds to the atmosphere. It can remove a wide range of organic compounds and is widely used in cost-effective filtration systems. The EcoSorb™ range can effectively eliminate BTEX, aliphatic, aromatic, halogenated and ketone pollutants. Jacobi offers granular, extruded and powdered activated carbon versions, for use dependent on the individual process conditions. view less
Activated Carbons - Flue Gas Mercury Treatment JACOBI GROUP Unwanted, and potentially damaging, impurities and contaminants must be prevented from entering the environment following incineration. Jacobi can provide an effective solution with our activated carbon products, designed to adsorb unwelcome airborne comp...view more Unwanted, and potentially damaging, impurities and contaminants must be prevented from entering the environment following incineration. Jacobi can provide an effective solution with our activated carbon products, designed to adsorb unwelcome airborne compounds from flue gases. Products from Jacobi’s Addsorb™ series are ideal for removing mercury. Different grades of products are available for gas and liquid phase applications. view less
Activated Carbons - Food Sweeteners / Oleochemicals / Chemicals JACOBI GROUP Jacobi’s activated carbon products can remove unwanted byproducts, odours, flavours and colours from various food products and chemicals, including: edible oils, fruit juice, wine and vinegar, cane sugar, glucose, fructose syrups, citric acid, gelatic, MS...view more Jacobi’s activated carbon products can remove unwanted byproducts, odours, flavours and colours from various food products and chemicals, including: edible oils, fruit juice, wine and vinegar, cane sugar, glucose, fructose syrups, citric acid, gelatic, MSG, glycerine, and during the brewing and bottling of soft drinks. view less
Activated Carbons - Home Water Filters JACOBI GROUP Jacobi supplies high quality activated carbon to manufacturers of both point of use and point of entry water filter systems. Activated carbon and Actitex can remove a variety of pollutants (including pesticides, industrial chemicals and pharmaceutical byp...view more Jacobi supplies high quality activated carbon to manufacturers of both point of use and point of entry water filter systems. Activated carbon and Actitex can remove a variety of pollutants (including pesticides, industrial chemicals and pharmaceutical byproducts following disinfection) that may be present in potable water supplied from the waterworks. AquaSorb™ grade is among one of only a few materials compliant with CA Proposition 65 requirements for heavy metal leaching. view less
Activated Carbons - Industrial Water Treatment JACOBI GROUP Using lab testing and deploying pilot equipment, Jacobi can recommend the correct activated carbon grade from our AquaSorb™ range to treat industrial wastewater, reducing toxicity and allowing safe discharge. These products can remove organics, BTEX, phen...view more Using lab testing and deploying pilot equipment, Jacobi can recommend the correct activated carbon grade from our AquaSorb™ range to treat industrial wastewater, reducing toxicity and allowing safe discharge. These products can remove organics, BTEX, phenols, colours, pesticides, AOX, surfactants and other chemicals, and can also be used for demineralisation or extensive purification in production of process or ultra-pure water. view less
Activated Carbons - Municipal Water Treatment JACOBI GROUP Jacobi Carbons provides solutions for municipalities needing to treat water to make it safe for the public to drink and use, ensuring full compliance with regulations and certifications. Products from the AquaSorb™ range can purify drinking water by remov...view more Jacobi Carbons provides solutions for municipalities needing to treat water to make it safe for the public to drink and use, ensuring full compliance with regulations and certifications. Products from the AquaSorb™ range can purify drinking water by removing contaminants including pesticides, organic matter, taste and odour components, VOCs, man made chemicals and more. AquaSorb™ products can also treat municipal wastewater to allow safe release back into the environment. view less
Activated Carbons - Oil & Gas Power JACOBI GROUP Oil and gas by-products are widely used in modern life, both in industry and in our day-to-day lives. Using activated carbon is a proven and effective way of removing contaminants and producing a pure product. Jacobi's carbon products can also be used to ...view more Oil and gas by-products are widely used in modern life, both in industry and in our day-to-day lives. Using activated carbon is a proven and effective way of removing contaminants and producing a pure product. Jacobi's carbon products can also be used to prevent damage to industrial equipment and recycle resources that can be reused later down the line. view less
Activated Carbons - Pharma and Medical JACOBI GROUP Activated carbon is an effective way to tackle problems during pharmaceutical manufacturing and meet the industry’s strict regulations. With extensive knowledge of the challenges faced by pharmaceutical companies, Jacobi not only supplies carbon, but can ...view more Activated carbon is an effective way to tackle problems during pharmaceutical manufacturing and meet the industry’s strict regulations. With extensive knowledge of the challenges faced by pharmaceutical companies, Jacobi not only supplies carbon, but can also advise on the most suitable products for your needs. As well as providing carbon for use in manufacturing, Jacobi also provides carbon to be used as an ingredient in human and veterinary medicines. view less
ASC Automatic Sample Changer Anton Paar Viscosity & Rheology ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less
Cenomic™ 1 Bühler AG Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 1 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less
Cenomic™ 15 Bühler AG Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler ...view more Cenomic™ 15 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less
Cenomic™ 3 Bühler AG Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 3 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less
Cenomic™ 6 Bühler AG Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler S...view more Cenomic™ 6 is a horizontal full volume agitated bead mill - ideal for pass operation, in many cases highly suitable for economic recirculation mode. Conveying EcoMizer™-discs guarantee highest energy efficiency. Bead separation is accomplished by Bühler SCS™ (Superior Centrifugal Separation), consisting of a highly effective deflector with integrated EcoMizer™-function. Protected from wear a discharge screen is located within the deflector. Cenomic™ is highly recommended for products like protective coatings, paints, gravure inks and many more. view less
FRS1600 Furnace Rheometer System Anton Paar Viscosity & Rheology FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less
High-Throughput Rheometer HTR 301 Anton Paar Viscosity & Rheology High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less
Ion Exchange Resins - Cabin Air Treatment JACOBI GROUP Jacobi supplies activated carbon and ion exchange resins to manufacturers of cabin air filters, used to clean air making its way inside cars from outside. Their high quality activated carbons help to purify the air by removing unwanted odours and various ...view more Jacobi supplies activated carbon and ion exchange resins to manufacturers of cabin air filters, used to clean air making its way inside cars from outside. Their high quality activated carbons help to purify the air by removing unwanted odours and various other unpleasant/harmful substances that can cause strain on the lungs. Jacobi's products can help manufacturers comply with the strict cabin air quality requirements, and they can advise on the best carbon for your needs. view less
Ion Exchange Resins - Food Sweeteners / Oleochemicals / Chemicals JACOBI GROUP Resinex has a dedicated food grade product line to support breweries, producers of juice, wine and spirits, and any other bottled consumable liquids. Ion exchange resins from Resinex are highly effective in the areas of water filtration, decolourisation, ...view more Resinex has a dedicated food grade product line to support breweries, producers of juice, wine and spirits, and any other bottled consumable liquids. Ion exchange resins from Resinex are highly effective in the areas of water filtration, decolourisation, deashing/demineralisation, fractionation, as well as taste and odour removal. Resinex products are designed for this use in the following areas: beet sugar, corn sugar, cane sugar, purification, chromatography, raw water and demineralisation. view less
Ion Exchange Resins - Gold Recovery / Metal Processing JACOBI GROUP Ion exchange resins are important components in a variety of mining applications. In addition to wastewater treatment, they are also useful for extraction of various metals such as gold, uranium and copper. Resinex is ready with a full assortment of resin...view more Ion exchange resins are important components in a variety of mining applications. In addition to wastewater treatment, they are also useful for extraction of various metals such as gold, uranium and copper. Resinex is ready with a full assortment of resins for mining applications. Resinex products are designed for use in recovery and surface waters treatment. view less
Ion Exchange Resins - Home Water Filters JACOBI GROUP Ion exchange resins are used to effectively remove hazardous contaminants from drinking water and are especially effective when used in consumer POE/POU water treatment systems. Resinex products are designed for use for both purification and demineralisat...view more Ion exchange resins are used to effectively remove hazardous contaminants from drinking water and are especially effective when used in consumer POE/POU water treatment systems. Resinex products are designed for use for both purification and demineralisation. view less
Ion Exchange Resins - Industrial Water Treatment JACOBI GROUP Resinex offers a cost-effective solution with a complete portfolio of ion exchange resins to handle water treatment on an industrial scale. Resinex products are designed for use in process water, demineralisation, condensate treatment, wastewater and puri...view more Resinex offers a cost-effective solution with a complete portfolio of ion exchange resins to handle water treatment on an industrial scale. Resinex products are designed for use in process water, demineralisation, condensate treatment, wastewater and purification. view less
Ion Exchange Resins - Municipal Water Treatment JACOBI GROUP Resinex offers a cost-effective solution and a complete portfolio of ion exchange resins to handle municipal water treatment applications. Resinex products are designed for use in drinking water and wastewater for nitrate, heavy metals removal and softnen...view more Resinex offers a cost-effective solution and a complete portfolio of ion exchange resins to handle municipal water treatment applications. Resinex products are designed for use in drinking water and wastewater for nitrate, heavy metals removal and softnening. view less
Ion Exchange Resins - Oil & Gas Power JACOBI GROUP Resinex products are highly efficient and are used to achieve excellent results and ensure the highest profitability in oil and gas processes. For example, in purification, demineralisation and condensate treatment.
Ion Exchange Resins - Pharma and Medical JACOBI GROUP A wide range of ion exchange resins from Resinex are highly effective at removing impurities created by the various processing stages (water, chemicals, pharmaceuticals, proteins and much more) and can control purity levels in processing streams. Our Resi...view more A wide range of ion exchange resins from Resinex are highly effective at removing impurities created by the various processing stages (water, chemicals, pharmaceuticals, proteins and much more) and can control purity levels in processing streams. Our Resinex products are designed for this purpose in chloralkaline, process water and purification. view less
Lovis 2000 M/ME Rolling-Ball Viscometer Anton Paar Viscosity & Rheology Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less
MacroMedia™ Bühler AG MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform prop...view more MacroMedia™ is unique to the market because of its combination of a high-performance pump and small-volume grinding unit. Thanks to improved process control in the pre-grinding stage, fluctuating raw-material qualities can be balanced out and uniform properties achieved for the pre-ground intermediate products. This produces optimum results in fine grinding and consequently increases the quality of the end product. At the same time, the system reduces production costs due to an improved material yield and optimized energy efficiency compared with other pre-grinding solutions. view less
MCR Rheometer Series Anton Paar Viscosity & Rheology MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less
MicroMedia™ L Bühler AG MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMe...view more MicroMedia™ L is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ L-C Bühler AG MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micro...view more MicroMedia™ L-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ P1-C Bühler AG MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...view more MicroMedia™ P1-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ P2-C Bühler AG MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The Micr...view more MicroMedia™ P2-C is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ X1 Bühler AG MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X1 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ X2 Bühler AG MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X2 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ X3 Bühler AG MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X3 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
MicroMedia™ X4 Bühler AG MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroM...view more MicroMedia™ X4 is a small volume annular agitated bead mill with variable power density from 0.1 to 4 kW/l. Designed for reliable use of micro-beads. The beads are concentrated in eddied outer ring layer through which the product flows axially. The MicroMedia™ excels by an intense cooling at the outer stator and in the annular discharge duct between inner rotor and inner stator. The upstream multiple separation steps prevent beads from loading the micro protection screen located within the rotor head. view less
Performix™ HSD-15 Bühler AG Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...view more Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa view less
Performix™ HSD-20 Bühler AG Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...view more Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa view less
Performix™ HSD-30 Bühler AG Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...view more Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa view less
Performix™ HSD-40 Bühler AG Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Availabl...view more Performix™ is excellently suited for the pre-mixing of a wide variety of products; for example, liquid inks, paints, coatings or other suspensions. The system is designed for manual production processes and is easy to operate, handle and clean. *Available in the regions Latin America, Asia, Middle East and Africa view less
PML 2 Bühler AG The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true gr...view more The PML 2 is the optimal solution for the development of innovative wet grinding processes. The core piece is a robust and powerful drive and control unit which can be combined with different process units tailored to specific applications. If for true grinding applications, metal-free dispersion of electronic materials or nano applications – the PML 2 is the right solution. view less
PML easy Bühler AG PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specif...view more PML easy is a universal bead mill platform for lab-scaled process development has a modular design and offers unmatched flexibility. Its core piece is a resistant and powerful drive which can be combined with two different process units tailored to specific applications. *Available in the regions Latin America, Asia, Middle East and Africa view less
RheoLabQC Quality Control Rheometer Anton Paar Viscosity & Rheology RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less
Rheometer Measuring Head Anton Paar Viscosity & Rheology Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less
RheoPlus Rheometer Software Anton Paar Viscosity & Rheology RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less
SMARTPAVE / SMARTPAVE PLUS ASPHALT RHEOMETER Anton Paar Viscosity & Rheology The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-b...view more The SmartPave dynamic shear rheometer (DSR) is based on the technology of MCR rheometers with the established EC motor system. SmartPave incorporates innovative features like the Toolmaster™, a Peltier temperature device for dry sample heating, and step-by-step instructions for measuring procedures according to AASHTO T315. The SmartPave rheometer takes asphalt rheology to previously unattained levels of accuracy, comfort, and ease of use. view less
Trias™ 300 Bühler AG Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less
Trias™ 600 Bühler AG Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less
Trias™ 800 Bühler AG Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international st...view more Reliability, high raw material yield and gentle dispersion of contamination- and temperature-sensitive products are key properties of Bühler three-roll mills. Different roll materials and concepts permit clean room production according to international standards. The camberless VIVA™ roll technology guarantees even product quality independent of the roll pressure. view less
Trinomic™ 1300 Bühler AG Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...view more Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning view less
Trinomic™ 600 Bühler AG Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative...view more Trinomic™ is a fully hydraulic three-roll mill that can be used for many different applications. It is especially designed for products from high to very high viscosity, e.g. materials for electronics, all kinds of printing inks, industrial and decorative paints, toners, coatings and lubricants, but also for materials for the cosmetics industries. The three-roll mill is designed for meeting high quality demands and at the same time enables convenient, easy operation and quick cleaning view less
WERCS Studio - SDS Authoring and Hazcom Labeling Software UL WERCS Studio WERCS Studio compliance software is designed to help you efficiently manage your Environmental Health & Safety (EHS) initiatives and mitigate risks of non-compliance. This hazard communication (Hazcom) and chemical data management software is comprised of...view more WERCS Studio compliance software is designed to help you efficiently manage your Environmental Health & Safety (EHS) initiatives and mitigate risks of non-compliance. This hazard communication (Hazcom) and chemical data management software is comprised of 30+ scalable modules that provide the most comprehensive and flexible automated solutions available, including Safety Data Sheet (SDS) Authoring, Labeling, and MSDS management. view less