UL Prospector

Success!

Successfully saved your search
Request Sample ACULYN™ Excel Dow Chemical - Home and Personal Care
  • INCI Name:
    Acrylates Copolymer
ACULYN™ Excel is a thickener and suspension aid for cleansing formulation. It is efficient at suspending both beads and bubbles at low pH values and is compatible with a variety of surfactants. This product is recommended for body washes and exfoliating b...view more ACULYN™ Excel is a thickener and suspension aid for cleansing formulation. It is efficient at suspending both beads and bubbles at low pH values and is compatible with a variety of surfactants. This product is recommended for body washes and exfoliating body washes, facial washes, exfoliating facial cleansers, liquid hand soaps, shampoos, and conditioning shampoos. view less
Compliance Highlights Available
BALANCE® CR Polymer Nouryon
  • INCI Name:
    Acrylates Copolymer
BALANCE® CR polymer is an acrylate emulsion resin designed for low VOC aerosol systems. Whether you need low VOC to comply with local regulations or to reduce cost, BALANCE® CR polymer can provide you with excellent hold and formulation latitude. It was p...view more BALANCE® CR polymer is an acrylate emulsion resin designed for low VOC aerosol systems. Whether you need low VOC to comply with local regulations or to reduce cost, BALANCE® CR polymer can provide you with excellent hold and formulation latitude. It was primarily designed as a hair fixative for aerosol hair spray systems. The polymer has been developed to provide hard holding performance and clear films from high water systems. BALANCE® CR polymer uses AkzoNobel’s low corrosion technology, which reduces the level of corrosion that is typically associated with emulsion polymers. view less
Compliance Highlights Unavailable
BE SQUARE™ 175 Amber Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
BE SQUARE™ 175 Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this produc...view more BE SQUARE™ 175 Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 81.7°- 87.2° C. view less
Compliance Highlights Available
BE SQUARE™ 175 Black Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
BE SQUARE™ 175 Black Wax is a black microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product...view more BE SQUARE™ 175 Black Wax is a black microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 78.9°- 87.8° C. view less
Compliance Highlights Available
BE SQUARE™ 175 White Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
BE SQUARE™ 175 White Wax is a white microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product...view more BE SQUARE™ 175 White Wax is a white microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 81.7°- 87.2° C. view less
Compliance Highlights Available
Benecel™ E4M polymer Ashland
  • INCI Name:
    Hydroxypropyl Methylcellulose
Benecel™ E4M polymer is a rheological and sensorial polymer for personal care formulations. It is supplied as a white to ivory powder. This product delivers improved foam creaminess and foam stability, improved skin feel, enhanced viscosity, reduced irrit...view more Benecel™ E4M polymer is a rheological and sensorial polymer for personal care formulations. It is supplied as a white to ivory powder. This product delivers improved foam creaminess and foam stability, improved skin feel, enhanced viscosity, reduced irritation potential of surfactant systems, efficacy at low use levels, and improved slip. It is recommended for shampoo, body wash, conditioner, creams/lotions, and shaving creams/gels. view less
Compliance Highlights Available
Benzoin Absolute Van Aroma Benzoin Absolute is a brown to dark brown crystal solid. It is insoluble in water and composed of Benzoic Acid and Benzyl Alcohol.
Compliance Highlights Available
Benzoin Crystals 100% Van Aroma Benzoin Crystals 100% is a brown to dark brown crystal solid. It is insoluble in water and composed of Benzoic Acid and Benzyl Alcohol.
Compliance Highlights Available
Benzoin Resinoid 35% BB Van Aroma Benzoin Resinoid 35% BB is brown to dark brown, and thick at room temperature. It has a balsamic odor.
Compliance Highlights Available
Benzoin Resinoid 40% BB Van Aroma Benzoin Resinoid 40% BB is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and Benzyl Benzoate.
Compliance Highlights Available
Benzoin Resinoid 50% BB Van Aroma Benzoin Resinoid 50% BB is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid and Benzyl Alcohol.
Compliance Highlights Available
Benzoin Resinoid 50% DEP Van Aroma Benzoin Resinoid 50% DEP is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and Diethyl Phthalate.
Compliance Highlights Available
Benzoin Resinoid 50% DPG Van Aroma Benzoin Resinoid 50% DPG is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and DiPropylene Glycol.
Compliance Highlights Available
Benzoin Resinoid 50% Ethanol Van Aroma Benzoin Resinoid 50% Ethanol is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and Ethyl Alcohol.
Compliance Highlights Available
Benzoin Resinoid 50% PG Van Aroma Benzoin Resinoid 50% PG is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and Propylene Glycol.
Compliance Highlights Available
Benzoin Resinoid 60% DPG Van Aroma Benzoin Resinoid 60% DPG is a brown to dark brown viscous liquid at room temperature. It is insoluble in water and composed of Benzoic Acid, Benzyl Alcohol, and Dipropylene Glycol.
Compliance Highlights Available
Benzoin Sumatra - Kasar size Van Aroma Benzoin Sumatra - Kasar size is a dark brown to blackish, oily liquid with a natural roasted coffee odor.
Compliance Highlights Available
Benzoin Sumatra - Sugar Size Van Aroma Benzoin Sumatra - Sugar Size is a brown to dark brown, solid. It is insoluble in water and composed of Benzoic Acid and Benzyl Alcohol.
Compliance Highlights Available
Bio.Acetum Balsâmico Aqia
  • INCI Name:
    Vinegar (and) Vitis Vinifera (Grape) Fruit Extract (and) Water (and) Fructose (and) Glucose (and) Gluconic Acid (and) Gluconolactone (and) Caesalpinia Spinosa Gum (and) Commiphora Myrrha Resin Extract (and) Myroxylon Balsamum (Balsam Tolu) Resin (and) Styrax Benzoin Resin Extract
Bio.Acetum Balsâmico is a balanced composition of balsamic vinegar, alpha and polyhydroxy acids, sugars and polysaccharides that rebalance the pH of the hair fiber, seal the cuticles and promote intense hydration.
Compliance Highlights Unavailable
Bio.Acetum Frutas Ácidas Aqia
  • INCI Name:
    Vinegar (and) Pyrus Malus (Apple) Fruit Extract (and) Water (and) Fructose (and) Glucose (and) Gluconic Acid (and) Gluconolactone (and) Caesalpinia Spinosa Gum (and) Citrus Limon (Lemon) Fruit Extract (and) Tamarindus Indica Fruit Extract
Bio.Acetum Frutas Ácidas is a balanced composition of acidic vinegar (apple, lemon and tamarind), alpha and polyhydroxy acids, sugars and polysaccharides that rebalance the pH of the hair fiber, seal the cuticles and promote intense hydration.
Compliance Highlights Unavailable
Bio.Acetum Maçã Aqia
  • INCI Name:
    Vinegar (and) Pyrus Malus (Apple) Fruit Extract (and) Water (and) Fructose (and) Glucose (and) Gluconic Acid (and) Gluconolactone (and) Caesalpinia Spinosa Gum
Bio.Acetum Maçã is a balanced composition of apple vinegar, alpha and polyhydroxy acids, sugars and polysaccharides that rebalance the pH of the hair fiber, seal the cuticles and promote intense hydration.
Compliance Highlights Unavailable
Request Sample Black charcoal bead Spec-Chem Industry Inc. 南京斯拜科生化实业有限公司
  • INCI Name:
    Charcoal Powder (and) Sucrose (and) Zea Mays (Corn) Starch (and) Hydroxypropyl Methylcellulose (and) Polyvinyl Alcohol
Black charcoal bead is made by active charcoal powder. It features the ability to absorb oil and bad odor, deliver active carbon instantly, is soft and easy to be dispersed, and can be used in face wash or toothpaste.
Compliance Highlights Available
CELOPRO® H2000 Celotech Chemical Co., Ltd. CELOPRO® H2000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily solub...view more CELOPRO® H2000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily soluble in water and can be used to prepare solutions with a wide range of viscosities. CELOPRO® H2000 is ideal for use in hair coloring, body lotion, sun care products, liquid make-ups, and toothpaste. view less
Compliance Highlights Unavailable
CELOPRO® H300 Celotech Chemical Co., Ltd. CELOPRO® H300 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily solubl...view more CELOPRO® H300 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily soluble in water and can be used to prepare solutions with a wide range of viscosities. CELOPRO® H300 is ideal for use in hair coloring, body lotion, sun care products, and liquid make-ups. view less
Compliance Highlights Unavailable
CELOPRO® H30000 Celotech Chemical Co., Ltd. CELOPRO® H30000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily solu...view more CELOPRO® H30000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily soluble in water and can be used to prepare solutions with a wide range of viscosities. CELOPRO® H30000 is ideal for use in shampoo, toothpaste, and body lotion. view less
Compliance Highlights Unavailable
CELOPRO® H6000 Celotech Chemical Co., Ltd. CELOPRO® H6000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily solub...view more CELOPRO® H6000 is a white powder made of hydroxyethyl cellulose. It is a non-ionic, water-soluble material that can thicken, suspend, bind, emulsify, form films, stabilize, disperse, retain water, and provide protective colloid action. It is readily soluble in water and can be used to prepare solutions with a wide range of viscosities. CELOPRO® H6000 is ideal for use in hair coloring, body lotion, sun care products, liquid make-ups, toothpaste, mascara, and shampoo. view less
Compliance Highlights Unavailable
Carbopol® Aqua SF-1 OS Polymer Lubrizol
  • INCI Name:
    Acrylates Copolymer
Carbopol® Aqua SF-1 OS Polymer is a new grade of acrylates copolymer targeting skin and sun care applications. This polymer is capable of giving formulators the ability to offer emulsion stability and desired aesthetic properties in systems containing pig...view more Carbopol® Aqua SF-1 OS Polymer is a new grade of acrylates copolymer targeting skin and sun care applications. This polymer is capable of giving formulators the ability to offer emulsion stability and desired aesthetic properties in systems containing pigments and electrolytes at levels required to deliver efficacy from the product to the consumer. It is recommended for use in formulation products such as facial lotions and creams with pigments and/or optical modifiers, skin lightening lotions and creams with physical lightening pigments, sun care, and color cosmetic products. view less
Compliance Highlights Unavailable
Carfil® 9121NP Wanhua Chemical Group Co., Ltd. 万华化学集团股份有限公司
  • INCI Name:
    Acrylates Copolymer
Carfil® 9121NP is an Acrylates Copolymer. Acrylates Copolymer has good film-forming properties, especially in eye make-up products. It has excellent water-resistance and anti-smudge properties, and is of low cost.
Compliance Highlights Unavailable
Celopre® ME30M Celotech Chemical Co., Ltd.
  • INCI Name:
    Hydroxypropyl Methylcellulose
Celopre® ME30M is a type of Hydroxypropyl methylcellulose (HPMC) with high viscosity and gels at a temperature of 58℃-64℃. Being a physiologically harmless cosmetic additive, Celopre offers a multitude of applications in the field of personal care. Hydrox...view more Celopre® ME30M is a type of Hydroxypropyl methylcellulose (HPMC) with high viscosity and gels at a temperature of 58℃-64℃. Being a physiologically harmless cosmetic additive, Celopre offers a multitude of applications in the field of personal care. Hydroxyethyl celluloses are the most widely used Celopre-grades in the cosmetics field. view less
Compliance Highlights Available
Request Sample Covacryl A15 PE1 Sensient Cosmetic & Fragrances
  • INCI Name:
    Acrylates Copolymer (and) Aqua (and) Phenoxyethanol (and) Caprylyl Glycol
Covacryl A15 PE1 is an emulsion containing acrylic copolymer with a polar group. It is surfactant and paraben free. It is ideal for use in eyeliner, mascara, water-based foundation, and water-based sunscreen.
Compliance Highlights Available
Request Sample Covacryl E 14 PF Sensient Cosmetic & Fragrances
  • INCI Name:
    Aqua (and) Acrylates Copolymer (and) Pentylene Glycol (and) Caprylyl Glycol (and) Decylene Glycol (and) Butylene Glycol (and) Caprylhydroxamic Acid (and) 1,2-Hexanediol (and) Ethylhexylglycerin
Covacryl E 14 PF is an emulsion containing acrylic copolymer with a polar group. This off white liquid has a characteristic odor. It is ideal for use in eyeliner, mascara, water-based foundation, and water-based sunscreen.
Compliance Highlights Available
DERMACRYL® AQF Film Forming Polymer Nouryon
  • INCI Name:
    Acrylates Copolymer
DERMACRYL® AQF Film Forming Polymer is well suited for use as a water resistant film former in emulsion sunscreen formulations. It is a virtually universal ingredient, suited for formulating spray emulsions as well as traditional creams and lotions. The D...view more DERMACRYL® AQF Film Forming Polymer is well suited for use as a water resistant film former in emulsion sunscreen formulations. It is a virtually universal ingredient, suited for formulating spray emulsions as well as traditional creams and lotions. The DERMACRYL® AQF polymer works well in systems that contain organic UV actives, inorganic actives, or combinations of the two. In addition, both UVA and UVB filters may be incorporated into these formulations, thereby allowing the formulation of systems that offer broad- spectrum protection. view less
Compliance Highlights Unavailable
DERMACRYL® C Nouryon
  • INCI Name:
    Acrylates Copolymer
DERMACRYL® C film forming polymer is an innovative film forming polymer technology designed especially for color cosmetics applications. DERMACRYL® C film forming polymer is particularly well suited for use in O/W mascara and eye liner formulations. This...view more DERMACRYL® C film forming polymer is an innovative film forming polymer technology designed especially for color cosmetics applications. DERMACRYL® C film forming polymer is particularly well suited for use in O/W mascara and eye liner formulations. This polymer offers a number of consumer friendly benefits because it forms clear, substantive, flexible films which can improve resistance to wear, enhance water resistance, build volume, and give a soft natural feel. Although substantive, the DERMACRYL® C polymer films are easily removed with warm soapy water or standard make-up removers. view less
Compliance Highlights Unavailable
DERMACRYL® X Nouryon
  • INCI Name:
    Acrylates Copolymer
DERMACRYL® X provides market leading water and rub-off resistance for reliable high SPF systems with pleasing aesthetics in both inorganic and organic systems delivered from an emulsion base. This polymer also requires no heat or neutralization and can be...view more DERMACRYL® X provides market leading water and rub-off resistance for reliable high SPF systems with pleasing aesthetics in both inorganic and organic systems delivered from an emulsion base. This polymer also requires no heat or neutralization and can be easily incorporated into emulsion-based sunscreens to help simplify the formulation process. view less
Compliance Highlights Unavailable
Daitosol 5000AD Daito Kasei Kogyo Co., Ltd.
  • INCI Name:
    Acrylates Copolymer
Daitosol 5000AD is a transparent, glossy film in the Daitosol Product Series for cosmetic products. This product has the greatest resistance to moisture absorption, has the greatest film hardness, and has good adhesiveness on the the skin.
Compliance Highlights Unavailable
Easyliance® Givaudan Active Beauty
  • INCI Name:
    Acacia Senegal Gum (and) Hydrolyzed Rhizobian Gum
Easyliance® is a powerful combination of high hydrolyzed biopolymer and Acacia gum. This natural tightener is approved by Ecocert and offers a cosmetic lifting to the skin, with fast and visible results.
Compliance Highlights Unavailable
Fantasy Gold FM3081 Sandream Impact
  • INCI Name:
    Mica (and) CI 77491 (and) Silica (and) Acrylates Copolymer (and) Aluminum Powder
Fantasy Gold FM3081 is a free flowing gold powder with a particle size of 10-60 µm. The Fantasy series has concentrated color backgrounds with reflective holographic pearls that produce rainbow spectra effects.
Compliance Highlights Available
Fantasy Midnight FS6335 Sandream Impact
  • INCI Name:
    Ferric Ferrocyanide (and) Synthetic Fluorphlogopite (and) Titanium Dioxide (and) Acrylates Copolymer (and) Iron Oxides (and) Aluminum Powder
Fantasy Midnight FS6335 is a free flowing dark blue powder with a particle size of 10-100μm. The Fantasy series has concentrated color backgrounds with reflective holographic pearls that produce rainbow spectra effects.
Compliance Highlights Available
Gantrez™ AN-169 PVM/MA copolymer Ashland
  • INCI Name:
    PVM/MA Copolymer
Gantrez™ AN-169 is a copolymer of methyl vinyl ether and maleic anhydride. It is a water-insoluble white powder that can be easily dispersed in water where the polymeric anhydride hydrolyzes to produce a transparent solution of the free acid. The diacid ...view more Gantrez™ AN-169 is a copolymer of methyl vinyl ether and maleic anhydride. It is a water-insoluble white powder that can be easily dispersed in water where the polymeric anhydride hydrolyzes to produce a transparent solution of the free acid. The diacid form is available as Gantrez S-97 PVM/MA copolymer that cans be directly added to toothpaste, mouthwash and hair care formulations. Gantrez AN-169 copolymer is used as a base polymer for making bioadhesives for denture adhesives. view less
Compliance Highlights Unavailable
Gantrez™ MS-955 calcium/sodium PVM/MA polymer Ashland
  • INCI Name:
    Calcium/Sodium PVM/MA Copolymer
Gantrez™ MS-955 polymer is a mixed sodium and calcium salt of PVM/MA copolymer in a white to off-white powder form. The calcium/sodium PVM/MA copolymer is slowly soluble in water resulting in amber-colored solutions with high viscosity and adhesivity. Thi...view more Gantrez™ MS-955 polymer is a mixed sodium and calcium salt of PVM/MA copolymer in a white to off-white powder form. The calcium/sodium PVM/MA copolymer is slowly soluble in water resulting in amber-colored solutions with high viscosity and adhesivity. This product is used as a bioadhesive in denture and ostomy adhesives, and as a mucoadhesive for drug delivery to mucous membranes. view less
Compliance Highlights Available
Gantrez™ S-96 BF Solution ST PVM/MA polymer Ashland
  • INCI Name:
    PVM/MA Copolymer
Gantrez™ S-96 BF Solution ST PVM/MA copolymer helps control the formation and growth of tartar, is effective in delivery and retention of active ingredients including antimicrobials, flavors, coolants, and medicants in toothpaste and mouthwash application...view more Gantrez™ S-96 BF Solution ST PVM/MA copolymer helps control the formation and growth of tartar, is effective in delivery and retention of active ingredients including antimicrobials, flavors, coolants, and medicants in toothpaste and mouthwash applications. These water-soluble PVM/MA copolymers comprise methyl vinyl ether and maleic acid moieties. Gantrez™ S-96 BF Solution ST PVM/MA polymer is in 13% aqueous solution form. view less
Compliance Highlights Unavailable
Gantrez™ S-97 BF PVM/MA polymer Ashland
  • INCI Name:
    PVM/MA Copolymer
Gantrez™ S-97 BF PVM/MA copolymer is the free acid form of the copolymer of methyl vinyl ether and maleic anhydride. These polymers serve as excellent film formers and mucosal bio-adhesives. Gantrez™ S-97 BF PVM/MA copolymer is a powder form for use in h...view more Gantrez™ S-97 BF PVM/MA copolymer is the free acid form of the copolymer of methyl vinyl ether and maleic anhydride. These polymers serve as excellent film formers and mucosal bio-adhesives. Gantrez™ S-97 BF PVM/MA copolymer is a powder form for use in hair care, toothpaste and mouthwash applications. In toothpaste and mouthwash, Gantrez™ S-97 BF PVM/MA copolymer helps control formation and growth of tartar, protects enamel from dietary acid and retains active ingredients, including antimicrobials and flavors, in the mouth. view less
Compliance Highlights Unavailable
HEC CF-G Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Hydroxyethylcellulose
HEC CF-G, Hydroxy Ethyl Cellulose, is a yellowish powder ideal for use in shampoos, rinses, and cleansing formulations. Aqueous solutions of HEC have excellent characteristics for application as thickeners, water-retention agents.
Compliance Highlights Unavailable
HEC CF-V Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Hydroxyethylcellulose
HEC CF-V, Hydroxy Ethyl Cellulose, is a yellowish powder ideal for use in shampoos, rinses, and cleansing formulations. Aqueous solutions of HEC have excellent characteristics for application as thickeners, water-retention agents.
Compliance Highlights Unavailable
HEC CF-W Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Hydroxyethylcellulose
HEC CF-W, Hydroxy Ethyl Cellulose, is a yellowish powder ideal for use in shampoos, rinses, and cleansing formulations. Aqueous solutions of HEC have excellent characteristics for application as thickeners, water-retention agents.
Compliance Highlights Unavailable
HEC CF-X Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Hydroxyethylcellulose
HEC CF-X, Hydroxy Ethyl Cellulose, is a yellowish powder ideal for use in shampoos, rinses, and cleansing formulations. Aqueous solutions of HEC have excellent characteristics for application as thickeners, water-retention agents.
Compliance Highlights Unavailable
HEC CF-Y Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Hydroxyethylcellulose
HEC CF-Y, Hydroxy Ethyl Cellulose, is a yellowish powder ideal for use in shampoos, rinses, and cleansing formulations. Aqueous solutions of HEC have excellent characteristics for application as thickeners, water-retention agents.
Compliance Highlights Unavailable
KLEASOL TST Rheolab Ltd
  • INCI Name:
    Acrylates Copolymer
KLEASOL TST is a cross-linked aqueous anionic acrylic copolymer emulsion. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly surfactant based products where viscosity, high ...view more KLEASOL TST is a cross-linked aqueous anionic acrylic copolymer emulsion. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly surfactant based products where viscosity, high transparency or suspension is required. This product is designed for clear formulations. view less
Compliance Highlights Unavailable
KLEASOL TVN Rheolab Ltd
  • INCI Name:
    Acrylates Copolymer
KLEASOL TVN is a medium/highly cross-linked aqueous anionic acrylic copolymer emulsion. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly where high viscosity or high trans...view more KLEASOL TVN is a medium/highly cross-linked aqueous anionic acrylic copolymer emulsion. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly where high viscosity or high transparency is required. This product is designed for clear formulations. view less
Compliance Highlights Unavailable
KLEASOL TVNX Rheolab Ltd
  • INCI Name:
    Acrylates Copolymer
KLEASOL TVNX is a highly efficient, cross-linked aqueous anionic acrylic copolymer thickener. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly where high viscosity or high...view more KLEASOL TVNX is a highly efficient, cross-linked aqueous anionic acrylic copolymer thickener. Its prime function is as a rheological control additive for applications within the toiletries and cosmetic industries, particularly where high viscosity or high transparency is required. This product is designed for clear formulations. view less
Compliance Highlights Unavailable
Request Sample Lexorez® 100 MB INOLEX Incorporated
  • INCI Name:
    Adipic Acid/Diglycol Crosspolymer
Lexorez® 100 MB is a film-forming polymer used in sunscreens to provide waterproofing and water resistance. It is a 100% active liquid and it is dispersible in most organic UV absorbers and emollients. It can also be used in color cosmetics (lipsticks, ma...view more Lexorez® 100 MB is a film-forming polymer used in sunscreens to provide waterproofing and water resistance. It is a 100% active liquid and it is dispersible in most organic UV absorbers and emollients. It can also be used in color cosmetics (lipsticks, mascara, foundations) to provide transfer resistance. It can be used for suncreens and all suncare products, lipsticks, mascara, and foundations. view less
Compliance Highlights Available
Request Sample Lexorez® 200 MB INOLEX Incorporated
  • INCI Name:
    Trimethylpentanediol/Adipic Acid/Glycerin Crosspolymer
Lexorez® 200 MB is a film-forming polymer used in sunscreens to provide waterproofing and water resistance. It can also be used in color cosmetics (lipsticks, mascara, foundations) to provide transfer resistance. It is dispersible in all oils, and can be ...view more Lexorez® 200 MB is a film-forming polymer used in sunscreens to provide waterproofing and water resistance. It can also be used in color cosmetics (lipsticks, mascara, foundations) to provide transfer resistance. It is dispersible in all oils, and can be completely soluble in highly polar emollients and UV absorbers. It can be used in suncreens and all suncare products, lipsticks, mascara, foundations. view less
Compliance Highlights Available
Request Sample Lexorez® TL-8 INOLEX Incorporated
  • INCI Name:
    Trimethylpentanediol/Adipic Acid Copolymer
Lexorez® TL-8 is used in sunless tanning products as a delivery system for DHA (dihydroxyacetone). It is also effective in anti-aging, anti-acne, and skin lightening products, or any formulation where the controlled delivery of an active is required. Lexo...view more Lexorez® TL-8 is used in sunless tanning products as a delivery system for DHA (dihydroxyacetone). It is also effective in anti-aging, anti-acne, and skin lightening products, or any formulation where the controlled delivery of an active is required. Lexorez® TL-8 acts as a reservoir for actives by entrapping them within the matrix. The result is a longer lasting, deeper tan from tanning products, and less irritation from anti-aging actives. It can be used in sunless tanning or self-tanning formulations, and anti-aging, anti-acne, and skin lightening formulations. view less
Compliance Highlights Available
Luviflex® Soft BASF
  • INCI Name:
    Acrylates Copolymer
Luviflex® Soft is a styling agent suitable for various hair care products, especially hair mousses.
Compliance Highlights Available
Mastic Gum Lalilab, Inc. Mastic Gum is a free flowing powder that can be used in a wide range of applications in both the food and beverage and personal care industries.
Compliance Highlights Unavailable
NKY® MVE Technical Grade Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司 NKY® MVE Technical Grade is Methoxyethylene, Vinyl methyl ether;1-Methoxethylene.
Compliance Highlights Available
OHlan™ Lubrizol
  • INCI Name:
    Hydroxylated Lanolin
OHlan™ lanolin derivative is hydroxylated lanolin. It is 100% active, and is supplised as a yellow-ambed to pale tan, waxy solid. This product is an excellent water in oil emulsifier for a wide range of applications. Its adhesion properties coupled with...view more OHlan™ lanolin derivative is hydroxylated lanolin. It is 100% active, and is supplised as a yellow-ambed to pale tan, waxy solid. This product is an excellent water in oil emulsifier for a wide range of applications. Its adhesion properties coupled with its pigment dispersion properties make it ideally suited for long wear color cosmetic products. view less
Compliance Highlights Available
OraRez™ AN-100P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ AN-100P is an alternating co-polymer of methyl vinyl ether and maleic anhydride in the form of powder. In oral care products it can serve as mucosal adhesive resins for toothpaste , mouthwash , denture adhesive , etc.
Compliance Highlights Available
OraRez™ AN-20P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ AN-20P is an alternating copolymer of methyl vinyl ether and maleic anhydride In the form of powder. In oral care products it can serve as mucosal adhesive resins for toothpaste , mouthwash , denture adhesive , etc.
Compliance Highlights Available
OraRez™ AN-30P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ AN-30P is a white to off-white free flowing powder of alternating co-polymer of methyl vinyl ether and maleic anhydride.
Compliance Highlights Available
OraRez™ AN-50P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ AN-50P is an white to off-white free flowing powder of alternating co-polymer of methyl vinyl ether and maleic anhydride.
Compliance Highlights Available
OraRez™ AN-70P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ AN-70P is a white to off-white free flowing powder of alternating co-polymer of methyl vinyl ether and maleic anhydride.
Compliance Highlights Available
OraRez™ W-100L12 Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ W-100L12 is a free acid of the co-polymer of methyl vinyl ether and maleic anhydride in the form of 12% water solution. In oral care products it can serve as mucosal adhesive resins for toothpaste , mouthwash , denture adhesive , etc.
Compliance Highlights Available
OraRez™ W-100P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ W-100P is a free acid of the co-polymer of methyl vinyl ether and maleic anhydride In the form of powder. In oral care products it can serve as mucosal adhesive resins for toothpaste , mouthwash , denture adhesive , etc.
Compliance Highlights Available
OraRez™ W-20L20 Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ W-20L20 is a free acid of the copolymer of methyl vinyl ether and maleic anhydride In the form of 20% water solution. In oral care products it can serve as mucosal adhesive resins for toothpaste , mouthwash , denture adhesive , etc.
Compliance Highlights Available
OraRez™ W-20P Boai NKY Pharmaceuticals Ltd. 博爱新开源制药股份有限公司
  • INCI Name:
    PVM/MA Copolymer
OraRez™ W-20P is a free acid of the co-polymer of methyl vinyl ether and maleic anhydride In the form of powder. In oral care products it can serve as mucosal adhesive resins for toothpaste, mouthwash, denture adhesive, etc.
Compliance Highlights Available
Request Sample Paracera® N 101 Paramelt
  • INCI Name:
    Polyethylene
Paracera® N 101 is a blend of Polyethylene and Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate. It is recommended for cosmetic and pharmaceutical preparations.
Compliance Highlights Available
Request Sample Paracera® N 106 Paramelt
  • INCI Name:
    Polyethylene
Paracera® N 106 is a blend of Polyethylene and Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate. It is recommended for cosmetic and pharmaceutical preparations.
Compliance Highlights Available
Request Sample Paracera® N 96 Paramelt
  • INCI Name:
    Polyethylene
Paracera® N 96 is a highly controlled, narrow molecular weight distribution of primarily linear hydrocarbons that has high performance property impact at low addition levels. The sharp phase change properties are very effective at increasing temperature s...view more Paracera® N 96 is a highly controlled, narrow molecular weight distribution of primarily linear hydrocarbons that has high performance property impact at low addition levels. The sharp phase change properties are very effective at increasing temperature stability and preventing premature softening of the finished product. view less
Compliance Highlights Available
Peroxydone™ hydrogen peroxide and PVP polymer complexes Ashland
  • INCI Name:
    PVP (and) Hydrogen Peroxide
Peroxydone™ complexes are solid powder complexes of pharmaceutical grade PVP with hydrogen peroxide. Three grades are available: Peroxydone™ K-30, K-90, and XL-10 The grades differ by the PVP base polymer. They are stable in a wide range of solvent s...view more Peroxydone™ complexes are solid powder complexes of pharmaceutical grade PVP with hydrogen peroxide. Three grades are available: Peroxydone™ K-30, K-90, and XL-10 The grades differ by the PVP base polymer. They are stable in a wide range of solvent systems. The complexes deliver hydrogen peroxide on contact with water or saliva in the mouth to provide teeth whitening. Peroxydone™ complexes are used in tooth whitening strips, paint-on whitening gels, tablets and films. view less
Compliance Highlights Unavailable
Plasdone™ S-630 pharmaceutical grade VP/VA copolymer Ashland
  • INCI Name:
    VP/VA Copolymer
Plasdone™ S-630 VP/VA copolymer is a 60:40 linear, random copolymer of N-vinyl-2-pyrolidone (PVP) and vinyl acetate. Plasdone™ S-630 VP/VA copolymer acts as a tablet binder in denture cleanser tablets.
Compliance Highlights Available
PrimaFlo™ MP3295A polymer Ashland
  • INCI Name:
    Hydroxypropyl Methylcellulose
PrimaFlo™ MP3295A polymer is a rheological and sensorial polymer for personal care formulations. It is supplied as a liquid dispersion, ivory white. This product delivers improved foam creaminess and foam stability, improved skin feel, enhanced viscosity,...view more PrimaFlo™ MP3295A polymer is a rheological and sensorial polymer for personal care formulations. It is supplied as a liquid dispersion, ivory white. This product delivers improved foam creaminess and foam stability, improved skin feel, enhanced viscosity, reduced irritation potential of surfactant systems, efficacy at low use levels, and improved slip. It is recommended for shampoo, body wash, conditioner, creams/lotions, and shaving creams/gels. view less
Compliance Highlights Available
RFCB Daito Kasei Kogyo Co., Ltd.
  • INCI Name:
    Rayon
RFCB is a part of Daito's Fiber Series. This product is a rayon fiber that is black in color, round in shape, and composed of Rayon, Silica, Black 2 (CI77266), and DK Black No. 2. Various thickness and lengths are available for this product.
Compliance Highlights Unavailable
RHEOSTYL™ 100 Coatex an Arkema Group
  • INCI Name:
    Acrylates Copolymer
RHEOSTYL™ 100 is a rheology modifier highly efficient to thicken and suspend particles in all type of surfactant and soap-based cleansing formulas. RHEOSTYL™ 100 provides elegant texture with smooth flow and high clarity from neutral pH to alkaline pH. RH...view more RHEOSTYL™ 100 is a rheology modifier highly efficient to thicken and suspend particles in all type of surfactant and soap-based cleansing formulas. RHEOSTYL™ 100 provides elegant texture with smooth flow and high clarity from neutral pH to alkaline pH. RHEOSTYL™ 100 is a low viscosity aqueous liquid emulsion easily incorporated in any type of formulations. view less
Compliance Highlights Unavailable
RHEOSTYL™ 85 L Coatex an Arkema Group
  • INCI Name:
    Acrylates Copolymer
RHEOSTYL™ 85 L is a rheology modifier specifically designed to provide excellent clarity, suspension and thickening to low pH cleansing products formulated with natural preservatives. RHEOSTYL™ 85 L is versatile and easy to formulate with a one step neutr...view more RHEOSTYL™ 85 L is a rheology modifier specifically designed to provide excellent clarity, suspension and thickening to low pH cleansing products formulated with natural preservatives. RHEOSTYL™ 85 L is versatile and easy to formulate with a one step neutralization process and no need for the back-acid technique. view less
Compliance Highlights Unavailable
RHEOSTYL™ UP Coatex an Arkema Group
  • INCI Name:
    Acrylates Copolymer
RHEOSTYL™ UP is a rheology modifier dedicated to skin care, sun care and color cosmetics applications. It is a highly efficient suspending agent to stabilize oil in water emulsions and suspend mineral particles, pigments or capsules in fluid formulations....view more RHEOSTYL™ UP is a rheology modifier dedicated to skin care, sun care and color cosmetics applications. It is a highly efficient suspending agent to stabilize oil in water emulsions and suspend mineral particles, pigments or capsules in fluid formulations. RHEOSTYL™ UP is a low viscosity aqueous liquid polymer easily incorporated in cold process formulations. view less
Compliance Highlights Unavailable
SCA-Y25E Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of t...view more SCA-Y25E (3-Isocyanatopropyltriethoxysilane) is unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. SCA-Y25E can be used in a number of applications. view less
Compliance Highlights Available
SCA-Y25M Beijing Entrepreneur Science &Trading Co., Ltd. 北京安特普纳科贸有限公司 SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion o...view more SCA-Y25M (3-Isocyanatopropyltrimethoxysilane) is a unique isocyanate functional silane.The isocyanate functionality exhibits the typical reactivity of an alkyl isocyanate and will react with most reactive hydrogen containing compounds.The silane portion of these products can then crosslink with each other or be used to adhere to a variety of substrates. It can be used in a number of applications. view less
Compliance Highlights Available
SPHERICAL THERMOPLASTIC POWDER CL-2080 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER CL-2080 features a superb feel due to its excellent particle size distribution and perfectly spherical shape, making them ideal for cosmetics. CL-2080 is often used in cosmetic foundations.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER CL-2507 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER CL-2507 is a low-density polyethylene (LDPE). With a larger particle size than most SPHERICAL THERMOPLASTIC POWDER ranges, it is applied in scrubs and facial cleansers.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER CL-3080 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER CL-3080 features a superb feel due to its excellent particle size distribution and perfectly spherical shape, making them ideal for cosmetics. CL-3080 is often used in cosmetic foundations.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER CL-5007 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER CL-5007 is a low-density polyethylene (LDPE). With a larger particle size than most SPHERICAL THERMOPLASTIC POWDER ranges, it is applied in scrubs and facial cleansers.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER CL-8007 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER CL-8007 is a low-density polyethylene (LDPE). With a larger particle size than most SPHERICAL THERMOPLASTIC POWDER ranges, it is applied in scrubs and facial cleansers.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER EA-209 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Ethylene/Acrylic Acid Copolymer
SPHERICAL THERMOPLASTIC POWDER EA-209 is a white powdered ethylene-acrylic acid copolymer (EAA). It shows a hydrophilicity, as well as an affinity with the polarity compound. EA-209 is often used in cosmetic foundations.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER HE-3040 Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Polyethylene
SPHERICAL THERMOPLASTIC POWDER HE-3040 is a fine particle of high-density polyethylene featuring excellent heat resistance. HE-3040 is often used in cosmetic foundations.
Compliance Highlights Unavailable
SPHERICAL THERMOPLASTIC POWDER SE-3107A Sumitomo Seika Chemicals Co., Ltd.
  • INCI Name:
    Ethylene/Methacrylate Copolymer
SPHERICAL THERMOPLASTIC POWDER SE-3107A is a white powdered ethylene methyl methacrylate copolymer (EMMA). SE-3107A & SE-3207B are softer than the other grades of SPHERICAL THERMOPLASTIC POWDER, and are often used in cosmetic foundations.
Compliance Highlights Unavailable
SurfaThix™ N Polymer Ashland
  • INCI Name:
    Acrylates Copolymer (and) Water
SurfaThix™ N Polymer is a slightly hydrophobic acrylic based polymer which provides rheology modification to surfactant based skin and hair care formulations. It is supplied as an easy to use 30% dispersion that thickens upon neutralization. A multi-funct...view more SurfaThix™ N Polymer is a slightly hydrophobic acrylic based polymer which provides rheology modification to surfactant based skin and hair care formulations. It is supplied as an easy to use 30% dispersion that thickens upon neutralization. A multi-functional robust polymer, SurfaThix™ N may be used in clear and opaque skin and hair rinse-off formulations to achieve excellent clarity, superior thickening and comparable suspension to benchmark polymer. Single step neutralization allows continuous processing during manufacturing. An all-in-one solution, the polymer enables manufacturers to produce various surfactant bases, high salt and cationic rinse-off formulations more easily and efficiently without formulation trade-offs. view less
Compliance Highlights Unavailable
ULTRAFLEX™ Amber Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
ULTRAFLEX™ Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, c...view more ULTRAFLEX™ Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 76.7- 87.8° C. view less
Compliance Highlights Available
VICTORY™ Amber Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
VICTORY™ Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, cre...view more VICTORY™ Amber Wax is an amber microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 76.7 - 82.2° C. view less
Compliance Highlights Available
VICTORY™ Lite Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
VICTORY™ Lite Wax is a lite microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creati...view more VICTORY™ Lite Wax is a lite microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 73.9 - 79.4° C. view less
Compliance Highlights Available
VICTORY™ White Wax New Phase Technologies
  • INCI Name:
    Microcrystalline Wax
VICTORY™ White Wax is a white microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, crea...view more VICTORY™ White Wax is a white microcrystalline wax that is much less crystalline than either paraffin waxes or hard microcrystalline waxes, due to a higher concentration of branched hydrocarbons. These small crystals are interspersed in this product, creating a matrix of amorphous domain which plasticize and improve flexibility of the material. This product has a melting point of 73.9 - 79.4° C. view less
Compliance Highlights Available
Request Sample White charcoal bead Spec-Chem Industry Inc. 南京斯拜科生化实业有限公司
  • INCI Name:
    Charcoal Powder (and) Silica (and) Titanium Dioxide (and) Sucrose (and) Zea Mays (Corn) Starch (and) Hydroxypropyl Methylcellulose (and) Polyvinyl Alcohol
White charcoal bead is made by active charcoal powder. The black charcoal cores are coated by a white or colored shell. It features the ability to deliver active carbon instantly, is soft and easy to be dispersed, and can be used in face wash or toothpast...view more White charcoal bead is made by active charcoal powder. The black charcoal cores are coated by a white or colored shell. It features the ability to deliver active carbon instantly, is soft and easy to be dispersed, and can be used in face wash or toothpaste. view less
Compliance Highlights Available
WorléeAqua Thix 100 Worlée Chemie GmbH
  • INCI Name:
    Acrylates Crosspolymer
WorléeAqua Thix 100 is a liquid acrylic dispersion designed to thicken, suspend and stabilize cleansing products containing low and high levels of surfactants or electrolytes. It offer emulsion stability and suspending of pigments in skin and sun care pro...view more WorléeAqua Thix 100 is a liquid acrylic dispersion designed to thicken, suspend and stabilize cleansing products containing low and high levels of surfactants or electrolytes. It offer emulsion stability and suspending of pigments in skin and sun care products and enhances pigment distribution in color cosmetics resulting in pleasant aesthetics and high coverage. It is a cost-effective and easy to handle product with numerous benefits. view less
Compliance Highlights Unavailable
WorléeAqua Thix 150 Worlée Chemie GmbH
  • INCI Name:
    Acrylates Copolymer
WorléeAqua Thix 150 is a liquid acrylic dispersion designed to thicken, suspend and stabilize products containing low and high levels of surfactants or electrolytes. It is a costeffective and easy to handle product with numerous benefits. The formulator c...view more WorléeAqua Thix 150 is a liquid acrylic dispersion designed to thicken, suspend and stabilize products containing low and high levels of surfactants or electrolytes. It is a costeffective and easy to handle product with numerous benefits. The formulator can create sophisticated cleansing products with different textures ranging from clear formulations with suspended particles to pearlescent systems and oil-rich shower creams. view less
Compliance Highlights Unavailable
WorléeAqua Thix 200 Worlée Chemie GmbH
  • INCI Name:
    Acrylates Copolymer
WorléeAqua Thix 200 is a rheology modifier and thickener to provide superior clarity and stable suspension of particles for naturally preserved low ph cleansing formulations. WorléeAqua Thix 200 is a cost-effective all-in-one polymer designed for use in f...view more WorléeAqua Thix 200 is a rheology modifier and thickener to provide superior clarity and stable suspension of particles for naturally preserved low ph cleansing formulations. WorléeAqua Thix 200 is a cost-effective all-in-one polymer designed for use in formulations with pH 4.0-9.0 and to create sophisticated cleansing products with different textures ranging from clear formulations with suspended particles to pearlescent systems and oil-rich shower creams. WorléeAqua Thix 200 shows an excellent compatibility with classical as well as mild and sulfate-free anionic and non-ionic surfactants. view less
Compliance Highlights Unavailable
WorléeMicromer C50/25 Worlée Chemie GmbH
  • INCI Name:
    Ammonium Acrylates Copolymer
Worlée Micromer C50/25 is a film former and supplied as a clear solution in water. It is free of surfactants and PEG. It forms highly transparent and glossy films. This product is primarily used as a basic polymer in decorative cosmetic preparations. It f...view more Worlée Micromer C50/25 is a film former and supplied as a clear solution in water. It is free of surfactants and PEG. It forms highly transparent and glossy films. This product is primarily used as a basic polymer in decorative cosmetic preparations. It facilitates pigment incorporation and increases the hold and durability of formulations after application. WorléeMicromer C50/25 is ideally suited as a dispersing medium for pigments. It can be used, as hair fixative polymer for use in clear, hard holding hair gels, mousses, and other styling aids. It shows a very good compatibility with alcohols. view less
Compliance Highlights Unavailable
WorléeMicromer C60/42 Worlée Chemie GmbH
  • INCI Name:
    Ammonium Acrylates Copolymer
WorléeMicromer C60/42 is a hydrophobic acrylic copolymer. Because the polymer is inherently moisture resistant, WorléeMicromer C60/42 can be used in waterproof formulations like eyeliners, mascara, sunscreens, foundations as well as a variety of creams an...view more WorléeMicromer C60/42 is a hydrophobic acrylic copolymer. Because the polymer is inherently moisture resistant, WorléeMicromer C60/42 can be used in waterproof formulations like eyeliners, mascara, sunscreens, foundations as well as a variety of creams and lotions. The film forming polymer help maintain active ingredients on the site of application by imparting resistance to abrasion or rub-off. It forms clear and flexible films and has been shown to significantly improve durability. It is supplied as dispersion in water. view less
Compliance Highlights Unavailable
WorléeMicromer C70/61 Worlée Chemie GmbH
  • INCI Name:
    Ammonium Acrylates Copolymer
WorléeMicromer C70/61 is a hydrophobic film forming polymer. It provide good flexibility and adhesion to form clear, glossy, transparent and non-tacky films. Thanks to the special manufacturing process, the polymers exhibit a high film hardness with lower...view more WorléeMicromer C70/61 is a hydrophobic film forming polymer. It provide good flexibility and adhesion to form clear, glossy, transparent and non-tacky films. Thanks to the special manufacturing process, the polymers exhibit a high film hardness with lower MFT (minimum film formation temperature). Due to the additional self-crosslinking of the polymer film during drying, its resistance increases over time. In a nail polish the polymer dry quickly on the nail and build a touch-dry in under a minute. WorléeMicromer C70/61 can also be used in waterproof formulations like eyeliners, mascara etc. view less
Compliance Highlights Unavailable
WorléeMicromer C80/50 Worlée Chemie GmbH
  • INCI Name:
    Ammonium Acrylates Copolymer
WorléeMicromer C80/50 is a hydrophobic film forming polymer and free from preservatives. It provides good flexibility and adhesion to form clear, glossy, transparent and fast drying film. The polymer is inherently moisture resistant and can be used in wat...view more WorléeMicromer C80/50 is a hydrophobic film forming polymer and free from preservatives. It provides good flexibility and adhesion to form clear, glossy, transparent and fast drying film. The polymer is inherently moisture resistant and can be used in waterproof formulations like eyeliners, mascara, sunscreens and foundations as well as a variety of creams and lotions. The film forming polymer help maintain active ingredients on the site of application by imparting resistance to abrasion or rub-off. It forms clear and flexible films and has been shown to significantly improve durability. Very suitable for peel-off formulations. view less
Compliance Highlights Unavailable
iActive Lifting Cosphatech LLC
  • INCI Name:
    Aqua (and) Butylene Glycol (and) Glycerin (and) Acetyl Hexapeptide-8 (and) Tamarindus Indica Seed Gum (and) Phenoxyethanol (and) Cucumis Sativus (Cucumber) Fruit Extract (and) Oryza Sativa (Rice) Extract (and) Honey Extract (and) Fucus Vesiculosus Extract (and) Adenosine (and) Ethylhexylglycerin (and) Cellulose Gum (and) Chondrus Crispus Powder (and) Ammonium Acryloyldimethyltaurate/VP Copolymer (and) PVP (and) 1,2-Hexanediol
iActive Lifting is a smart combination of different actives that will work on the wrinkle. Acetyl Hexapeptide-8, known as a Botox peptide due to its muscle relaxation properties, promotes the absorption of adenosine, a potent anti-wrinkle and energizer ac...view more iActive Lifting is a smart combination of different actives that will work on the wrinkle. Acetyl Hexapeptide-8, known as a Botox peptide due to its muscle relaxation properties, promotes the absorption of adenosine, a potent anti-wrinkle and energizer active. iActive Lifting also form an elastic film on the skin made of a fine net structure that smooth the wrinkles in a short period of time. view less
Compliance Highlights Available