AMIN GC95F | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN GC95F is an amino-acid type surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). Creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after was...view more
AMIN GC95F is an amino-acid type surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). Creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after washing without feeling taut.
Product properties include no irritation or hypersusceptibility, has outstanding foamability and good biodegradation. It can be applied in body wash for sensitive skin, shampoo for damaged hair, facial cleanser, baby products, shaving product, O/W co-emulsifier and toothpaste. It’s widely used in shampoo, facial cleanser, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
AMIN GCK30 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN GCK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, and no hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It is widely ...view more
AMIN GCK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, and no hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It is widely applied in body washes for sensitive skin, shampoo for damaged hair, facial cleanser, soft soap, shaving products, O/W Co-emulsifiers, toothpaste and baby shampoo. view less
Compliance Highlights Available
|
|
AMIN GCNa | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN GCNa is an amino-acid-derivative surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). This creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin...view more
AMIN GCNa is an amino-acid-derivative surfactant made from coconut fatty acid and glycine (an essential component of human skin collagen). This creamy and resilient foam is obtained in neutral to alkaline conditions. It leaves a fresh feeling on the skin after washing without feeling taut. It is a very mild and hypoallergenic and has good biodegradation. It is widely applied in toothpaste, body wash for sensitive skin, shampoo for damaged hair, facial cleanser, shaving products, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
AMIN LG30 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LG30 is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applie...view more
AMIN LG30 is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in body washs for sensitive skin, shampoos for damaged hair, facial cleansers, shaving products, soft soaps and baby shampoos. view less
Compliance Highlights Available
|
|
AMIN LGK30 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LGK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely appli...view more
AMIN LGK30 is an extremely mild amino-acid surfactant, with outstanding foamability. Good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in shampoos for damaged hair, body washs for sensitive skin, shaving products, facial cleansers, soft soaps and baby shampoos. view less
Compliance Highlights Available
|
|
AMIN LGNa | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LGNa is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applie...view more
AMIN LGNa is an extremely mild amino-acid surfactant, with outstanding foamability, good biodegradation, no irritation, no-hypersusceptibility. It can reduce irritation and leftover of anionic surfactant such as SLS and fatty acid soap. It’s widely applied in body wash for sensitive skin, shampoo for damaged hair, facial cleanser, shaving products, toothpaste, soft soap and baby shampoo. view less
Compliance Highlights Available
|
|
AMIN LS | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LS is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product has good resistance to salty-water ...view more
AMIN LS is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product has good resistance to salty-water and hard-water and leaves hair feel soft with manageability. It’s widely applied in hand soaps, body washes, shampoos, shaving products, oral cleansers, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
AMIN LS30 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LS30 is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamability. This product is milder then SLES by 7 times w...view more
AMIN LS30 is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamability. This product is milder then SLES by 7 times with good resistance to salty-water and hard-water. Applications include hand soap, body wash, shampoo, shaving cream, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
AMIN LSNa | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AMIN LSNa is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product stabilizes in pH 5.5 to alkali an...view more
AMIN LSNa is an extremely mild amino-acid surfactant, with high foamability. It can reach excellent synergistic effect when combined with other surfactants, meanwhile reduce irritation and improve foamabilty. This product stabilizes in pH 5.5 to alkali and impart hair soft-feeling and manageability to hair. It’s widely applied in hand soaps, body washes, shampoos, shaving products, oral cleansers, facial cleanser and other personal care products. view less
Compliance Highlights Available
|
|
AQUAGEL 35 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AQUAGEL 35 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. This product maintains viscosity under UV radiation and resists shearing for a long t...view more
AQUAGEL 35 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. This product maintains viscosity under UV radiation and resists shearing for a long time. Applications include creams, lotions, creamy gels, make-up foundation, sunscreen cream, formulas containing polar solvents, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
AQUAGEL 45 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AQUAGEL 45 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allow you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. It is re...view more
AQUAGEL 45 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allow you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. It is recommended to be applied in cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
AQUAGEL 55 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AQUAGEL 55 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. This pr...view more
AQUAGEL 55 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil and disperse pigment and physical sunscreen. This product will maintain viscosity under UV radiation while resisting shearing for a long amount of time. It is recommended to be applied in cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
AQUAGEL 65 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
AQUAGEL 65 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil. Ideal for application in styling gel, cream, lotion...view more
AQUAGEL 65 is a rheology modifier, stabilizer, thickener and emulsifier. It swells fast and allows you to create gel or cream immediately without neutralization or heat. It can emulsify all kinds of oil. Ideal for application in styling gel, cream, lotion, creamy gel, make-up foundation, sunscreen cream, formulas containing polar solvent, alcohol, polyol and formulas containing silicone or AHA. view less
Compliance Highlights Available
|
|
Biomethics® AF O/W | The Innovation Company® |
|
Biomethics® AF O/W is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do.
Compliance Highlights Available
|
|
Biomethics® CPS O/W | The Innovation Company® |
|
Biomethics® CPS O/W is a natural emulsifier designed for either cold or hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where low viscosity stable formulations ar...view more
Biomethics® CPS O/W is a natural emulsifier designed for either cold or hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where low viscosity stable formulations are desired. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also with the preservative system of customer's choice. view less
Compliance Highlights Available
|
|
Biomethics® CPS W/O | The Innovation Company® |
|
Biomethics® CPS W/O is a natural emulsifier designed for either cold or hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where low viscosity stable formulations ar...view more
Biomethics® CPS W/O is a natural emulsifier designed for either cold or hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where low viscosity stable formulations are desired. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also with the preservative system of customer's choice. view less
Compliance Highlights Available
|
|
Biomethics® Emulisifer Solanum W/O | The Innovation Company® |
|
Biomethics® Emulisifer Solanum W/O is based on natural ingredients and brings excellent softness to emulsions. As they do not contain traditional surfactants and PEGs, they do not disrupt the skin’s natural barrier in the same way as traditional emulsifie...view more
Biomethics® Emulisifer Solanum W/O is based on natural ingredients and brings excellent softness to emulsions. As they do not contain traditional surfactants and PEGs, they do not disrupt the skin’s natural barrier in the same way as traditional emulsifiers do. Biomethics® emulsifiers can be used as traditional hot process emulsifiers and the range offers alternatives for cold processing (CPS). view less
Compliance Highlights Available
|
|
Biomethics® Emulsifier Solanum CPS W/O | The Innovation Company® |
|
Biomethics® Emulsifier Solanum CPS W/O is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifier...view more
Biomethics® Emulsifier Solanum CPS W/O is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do. view less
Compliance Highlights Available
|
|
Biomethics® Emulsifier Solanum O/W | The Innovation Company® |
|
Biomethics® Emulsifier Solanum O/W is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do...view more
Biomethics® Emulsifier Solanum O/W is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do. view less
Compliance Highlights Available
|
|
Biomethics® HVO CPS O/W | The Innovation Company® |
|
Biomethics® HVO CPS O/W is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do.
Compliance Highlights Available
|
|
Biomethics® HVO CPS W/O | The Innovation Company® |
|
Biomethics® HVO CPS W/O is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do.
Compliance Highlights Available
|
|
Biomethics® HVO O/W | The Innovation Company® |
|
Biomethics® HVO O/W is an emulsifier that is based on natural ingredients and brings excellent softness to emulsions. It does not contain traditional surfactants and PEGs so it does not disrupt the skin’s natural barrier in the same way as traditional emu...view more
Biomethics® HVO O/W is an emulsifier that is based on natural ingredients and brings excellent softness to emulsions. It does not contain traditional surfactants and PEGs so it does not disrupt the skin’s natural barrier in the same way as traditional emulsifiers do. view less
Compliance Highlights Available
|
|
Biomethics® HVO W/O | The Innovation Company® |
|
Biomethics® HVO W/O is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do.
Compliance Highlights Available
|
|
Biomethics® LHS | The Innovation Company® |
|
Biomethics® Emulsifier LHS is a natural emulsifier for hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. It is ideal for luxurious skin care applications, and colour care applications like mascaras. The emulsifier...view more
Biomethics® Emulsifier LHS is a natural emulsifier for hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. It is ideal for luxurious skin care applications, and colour care applications like mascaras. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also with the preservative system of customer's choice. view less
Compliance Highlights Available
|
|
Biomethics® O/W | The Innovation Company® |
|
Biomethics® O/W is a natural emulsifier for hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where medium and high viscosities stable formulations are desired. The...view more
Biomethics® O/W is a natural emulsifier for hot processing. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. Ideal for natural product lines and applications where medium and high viscosities stable formulations are desired. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also with the preservative system of customer's choice. view less
Compliance Highlights Available
|
|
Biomethics® O/W SB | The Innovation Company® |
|
Biomethics® O/W SB is an emulsifier that is based on natural ingredients and brings excellent softness to emulsions. It does not contain traditional surfactants and PEGs so it does not disrupt the skin’s natural barrier in the same way as traditional emul...view more
Biomethics® O/W SB is an emulsifier that is based on natural ingredients and brings excellent softness to emulsions. It does not contain traditional surfactants and PEGs so it does not disrupt the skin’s natural barrier in the same way as traditional emulsifiers do. view less
Compliance Highlights Available
|
|
Biomethics® W/O | The Innovation Company® |
|
Biomethics® W/O is a natural emulsifier for W/O systems. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also wit...view more
Biomethics® W/O is a natural emulsifier for W/O systems. It is surfactant and PEG-free, so it does't disrupt skin's natural barrier. The emulsifier is available preserved with our standard preservative system (Phenoxyethanol). It can be preserved also with the preservative system of customer's choice. view less
Compliance Highlights Available
|
|
Biomethics® W/O VF | The Innovation Company® |
|
Biomethics® W/O VF is based on natural ingredients and bring excellent softness to emulsions. As it does not contain traditional surfactants and PEGs, It does not disrupt skin’s natural barrier in the same way as traditional emulsifiers do.
Compliance Highlights Available
|
|
BNPolyl® Colourplus Black nº1 WL 12 AS | The Innovation Company® |
|
BNPolyl® Colourplus Black nº1 WL 12 AS incorporates boron nitrate and carbon black. It has a grey or black, powder appearance with a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
BNPolyl® Colourplus Blue nº1 WL 12 AS | The Innovation Company® |
|
BNPolyl® Colourplus Blue nº1 WL 12 AS incorporates boron nitrate and ferric ammonium ferrocyanide. It has a white and blue, powder appearance with a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
BNPolyl® Colourplus Green nº1 WL 12 AS | The Innovation Company® |
|
BNPolyl® Colourplus Green nº1 WL 12 AS incorporates boron nitrate and Yellow 5. It has a white or green-blue, powder appearance with a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
CETETH 25 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
CETETH 25 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 6. It can resist inorganic salt, high or low pH, and it imparts finished product of high stabil...view more
CETETH 25 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 6. It can resist inorganic salt, high or low pH, and it imparts finished product of high stability and fine appearance. Ideal for application in cream, lotion, hair color cream and hair remover cream. view less
Compliance Highlights Available
|
|
CETETH 6 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
CETETH 6 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 25. It can resist inorganic salt, high or low pH, and it imparts finished product of high stabil...view more
CETETH 6 is synthesized by natural saturated fatty alcohol and Ethylene Oxide. It is an excellent and popular O/W emulsifier, suggested to combine with CETETH 25. It can resist inorganic salt, high or low pH, and it imparts finished product of high stability and fine appearance. Ideal for application in cream, lotion, hair color cream and depilatory cream. view less
Compliance Highlights Available
|
|
Colourmat® HL White R | The Innovation Company® |
|
Colourmat® HL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20...view more
Colourmat® HL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL Black | The Innovation Company® |
|
Colourmat® LL Black is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 ...view more
Colourmat® LL Black is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL Eletric Pink | The Innovation Company® |
|
Colourmat® LL Electric Pink is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between...view more
Colourmat® LL Electric Pink is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL Ocean Blue | The Innovation Company® |
|
Colourmat® LL Ocean Blue is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10...view more
Colourmat® LL Ocean Blue is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL Red | The Innovation Company® |
|
Colourmat® LL Red is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 mic...view more
Colourmat® LL Red is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL White R | The Innovation Company® |
|
Colourmat® LL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20...view more
Colourmat® LL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LL Yellow | The Innovation Company® |
|
Colourmat® LL Yellow is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 ...view more
Colourmat® LL Yellow is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® LVS White R | The Innovation Company® |
|
Colourmat® LVS White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-2...view more
Colourmat® LVS White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Colourmat® PL White R | The Innovation Company® |
|
Colourmat® PL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20...view more
Colourmat® PL White R is part of a range of color composites based on muscovite mica and various surface treatments. Colourmat® products are platelet-shaped particles giving good skin adherence. As the particles are platelet-shaped and sized between 10-20 microns, Colourmats provide a matte appearance upon application. view less
Compliance Highlights Available
|
|
Coloursphere® WL 10 Black HL | The Innovation Company® |
|
Colourpheres® WL 10 Black HL is a spherical composite material, in which colorants have been encapsulated into a polymer structure. Colourspheres® offers many advantages in comparison with conventional pigments as their structure is very different, and th...view more
Colourpheres® WL 10 Black HL is a spherical composite material, in which colorants have been encapsulated into a polymer structure. Colourspheres® offers many advantages in comparison with conventional pigments as their structure is very different, and their surface characteristics have been modified. The wetting properties of Colourspheres® are excellent due to their small specific surface area. They are very easy to disperse allowing easy colour shading. Colourspheres® are available in both hydrophobic (HB) and hydrophilic (HL) versions. view less
Compliance Highlights Available
|
|
Creablack® HLC | The Innovation Company® |
|
Creablack® HLC incorporates iron oxides and hydrogenated lecithin. It has a black, powder appearance with a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creagel® Crystal II Brassica | The Innovation Company® |
|
Creagel® Crystal II Brassica is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from tr...view more
Creagel® Crystal II Brassica is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transparent to slightly colored depending on the lipid used. view less
Compliance Highlights Available
|
|
Creagel® Crystal II Macadamiate | The Innovation Company® |
|
Creagel® Crystal II Macadamiate is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from...view more
Creagel® Crystal II Macadamiate is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transparent to slightly colored depending on the lipid used. view less
Compliance Highlights Available
|
|
Creagel® Crystal II MSO | The Innovation Company® |
|
Creagel® Crystal II MSO is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transpa...view more
Creagel® Crystal II MSO is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transparent to slightly colored depending on the lipid used. view less
Compliance Highlights Available
|
|
Creagel® Crystal II Oat | The Innovation Company® |
|
Creagel® Crystal II Oat is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transpa...view more
Creagel® Crystal II Oat is a thickened lipid, which has been produced from various oils by a polymerisation process. Creagel® Crystals are either fully synthetic or combinations of synthetic and natural lipids. They are anhydrous gels varying from transparent to slightly colored depending on the lipid used. view less
Compliance Highlights Available
|
|
Creagel® EZ 4 | The Innovation Company® |
|
Creagel® EZ 4 is an easy-to-use auto-emulsifier, which can be used to produce light emulsions and gel emulsions quickly in cold processes. It also permits to stabilize emulsions when added after emulsification. It is based on polymers and can be used for ...view more
Creagel® EZ 4 is an easy-to-use auto-emulsifier, which can be used to produce light emulsions and gel emulsions quickly in cold processes. It also permits to stabilize emulsions when added after emulsification. It is based on polymers and can be used for emulsions in a wide pH range. Creagel® EZ 4 is an efficient thickener and it sustains it’s capacity up to pH 12. view less
Compliance Highlights Available
|
|
Creagel® EZ 7 | The Innovation Company® |
|
Creagel® EZ 7 is an easy-to-use auto-emulsifier, which can be used to produce light emulsions and gel emulsions quickly in cold processes. It also permits to stabilize emulsions when added after emulsification. It is based on polymers and can be used to t...view more
Creagel® EZ 7 is an easy-to-use auto-emulsifier, which can be used to produce light emulsions and gel emulsions quickly in cold processes. It also permits to stabilize emulsions when added after emulsification. It is based on polymers and can be used to thicken emulsions in a wide pH range. Creagel® EZ 7 is based on Hydrogenated Polydecene and it therefore provides a very soft, lubricating texture. view less
Compliance Highlights Available
|
|
Creagel® EZ 8 | The Innovation Company® |
|
Creagel® EZ 8 is part of a range of auto-emulsifiers for cold processes. They are based on polymers and various emollients. Creagel® EZ can be used as primary emulsifiers or as co-emulsifiers to produce milky gel emulsions with a soft and non-tacky skin f...view more
Creagel® EZ 8 is part of a range of auto-emulsifiers for cold processes. They are based on polymers and various emollients. Creagel® EZ can be used as primary emulsifiers or as co-emulsifiers to produce milky gel emulsions with a soft and non-tacky skin feel. view less
Compliance Highlights Available
|
|
Creagel® EZ IH | The Innovation Company® |
|
Creagel® EZ IH is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and Isohexadecane and can be used to thicken emulsions in a wide pH range. It is therefore able to emulsi...view more
Creagel® EZ IH is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and Isohexadecane and can be used to thicken emulsions in a wide pH range. It is therefore able to emulsify even just a water phase without any additional lipids. Creagel® EZ IH has a light and silky feel and is Ethoxylate free. view less
Compliance Highlights Available
|
|
Creagel® EZ IN | The Innovation Company® |
|
Creagel® EZ IN is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and Isononyl Isononanoate and can be used to thicken emulsions in a wide pH range. It is therefore able to...view more
Creagel® EZ IN is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and Isononyl Isononanoate and can be used to thicken emulsions in a wide pH range. It is therefore able to emulsify even just a water phase without any additional lipids. Creagel® EZ IN is Ethoxylate free. view less
Compliance Highlights Available
|
|
Creagel® EZ VS | The Innovation Company® |
|
Creagel® EZ VS is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and can be used to thicken emulsions in a wide pH range and is based on Vegetable Squalane. It therefore g...view more
Creagel® EZ VS is an auto-emulsifier, which can be used to produce light emulsions and gel emulsions even in cold processes. It is based on polymers and can be used to thicken emulsions in a wide pH range and is based on Vegetable Squalane. It therefore gives the emulsion a silky and non-greasy feel. Creagel® EZ VS is ethoxylate free. view less
Compliance Highlights Available
|
|
Creagel® SIL | The Innovation Company® |
|
Creagel® SIL incorporates glycerin and glyceryl acrylate/acrylic acid copolymer. It has a clear to slightly hazy gel appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Crealanol® Gold | The Innovation Company® |
|
Crealanol® Gold is a mixture of esters and fatty acids derived from a natural wax. It is a film-forming and long-lasting agent. Crealanol® Gold is ideal for skin care formulations, especially lip products, as it repairs, moisturises and protects mucosa. I...view more
Crealanol® Gold is a mixture of esters and fatty acids derived from a natural wax. It is a film-forming and long-lasting agent. Crealanol® Gold is ideal for skin care formulations, especially lip products, as it repairs, moisturises and protects mucosa. It leaves a non-sticky, glossy film. view less
Compliance Highlights Available
|
|
Creanatural® Argan Sugar | The Innovation Company® |
|
Creanatural® Argan Sugar is part of a range of natural ingredients based on marine and plant extracts as well as various vegetable oils. They fit the natural ideology and add value to formulations with stability and skin conditioning benefits.
Compliance Highlights Available
|
|
Creapserse® THX CW DUO UVA/UVB AF UV 65 | The Innovation Company® |
|
Creapserse® THX CW DUO UVA/UVB AF UV 65 incorporates titanium dioxide and hydrogenated polydecene. It has a white, paste appearance a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creared® HLC | The Innovation Company® |
|
Creared® HLC incorporates iron oxides and hydrogenated lecithin. It has a red, powder appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasoluble® Nº1 | The Innovation Company® |
|
Creasoluble® n°1 incorporates PPG-26-Buteth-26 and PEG-40 Hydrogenated Castor Oil. It has an off-white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasoluble® Nº4 | The Innovation Company® |
|
Creasoluble® Nº4 incorporates PPG-26-Buteth-26. It has a clear, liquid or off-white, wax appearance with a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® CW 380+ | The Innovation Company® |
|
Creasperse® CW 380+ is part of a range of ready-to-use pre-dispersed mineral UV filters, in a solid form. They are based on a unique combination of Titanium Dioxide, Alphaflow® (Hydrogenated Polydecene), and wax. Alphaflow® is a pure, hypoallergenic, and ...view more
Creasperse® CW 380+ is part of a range of ready-to-use pre-dispersed mineral UV filters, in a solid form. They are based on a unique combination of Titanium Dioxide, Alphaflow® (Hydrogenated Polydecene), and wax. Alphaflow® is a pure, hypoallergenic, and ultra-soft emollient, with heat- and photostable characteristics. view less
Compliance Highlights Available
|
|
Creasperse® TetHys PA 4+ PS | The Innovation Company® |
|
Creasperse® TetHys PA 4+ PS is part of a range of ready-to-use pre-dispersed mineral UV filters. They are compositions of ultrafine Titanium Dioxide dispersed in Coconut Oil. They offer reliable and consistent UV protection. The UV filters are dispersed ...view more
Creasperse® TetHys PA 4+ PS is part of a range of ready-to-use pre-dispersed mineral UV filters. They are compositions of ultrafine Titanium Dioxide dispersed in Coconut Oil. They offer reliable and consistent UV protection. The UV filters are dispersed in such a way that they distribute evenly and offer a maximum capacity of UV- screening. Creasperse® Tethys dispersions are very photostable and available in different crystal sizes for different kinds of applications. view less
Compliance Highlights Available
|
|
Creasperse® TetHys White PS | The Innovation Company® |
|
Creasperse® TetHys White PS is part of a range of ready-to-use pre-dispersed mineral UV filters. They are compositions of ultrafine Titanium Dioxide dispersed in Coconut Oil. They offer reliable and consistent UV protection. The UV filters are dispersed i...view more
Creasperse® TetHys White PS is part of a range of ready-to-use pre-dispersed mineral UV filters. They are compositions of ultrafine Titanium Dioxide dispersed in Coconut Oil. They offer reliable and consistent UV protection. The UV filters are dispersed in such a way that they distribute evenly and offer a maximum capacity of UV- screening. Creasperse® Tethys dispersions are very photostable and available in different crystal sizes for different kinds of applications. view less
Compliance Highlights Available
|
|
Creasperse® THX CW UVB AF UV 50 | The Innovation Company® |
|
Creasperse® THX CW UVB AF UV 50 is used as GRASE-approved ready-to-use mineral filter pre-dispersions. They offer high UV protection and water resistance, with a soft, non-sticky feel for a clear application. They are designed to provide fluid dispersions...view more
Creasperse® THX CW UVB AF UV 50 is used as GRASE-approved ready-to-use mineral filter pre-dispersions. They offer high UV protection and water resistance, with a soft, non-sticky feel for a clear application. They are designed to provide fluid dispersions that allow sunscreen formulations to address various issues such as filter sedimentation, while being photostable. view less
Compliance Highlights Available
|
|
Creasperse® TR 14 AF 50 | The Innovation Company® |
|
Creasperse® TR 14 AF 50 incorporates titanium dioxide and hydrogenated polydecene. It has a white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® TR 14 VS 50 | The Innovation Company® |
|
Creasperse® TR 14 VS 50 incorporates titanium dioxide and squalene. It has a white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® TR 35 AF 65 | The Innovation Company® |
|
Creasperse® TR 35 AF 65 incorporates titanium dioxide and hydrogenated polydecene. It has a white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® TR 35 HVO 65 | The Innovation Company® |
|
Creasperse® TR 35 HVO 65 incorporates titanium dioxide and hydrogenated vegetable oil. It has a white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® TR 35 VS 65 | The Innovation Company® |
|
Creasperse® TR 35 HVO 65 incorporates titanium dioxide and hydrogenated vegetable oil. It has a white, liquid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasperse® UVA/UVB VS 50 | The Innovation Company® |
|
Creasperse® UVA/UVB VS 50 is a ready-to-use pre-dispersed mineral UV filter. It is a composition of ultrafine Titanium Dioxide or Zinc Oxide dispersed in photostable lipids. Standard grades are based on Alphaflow® (Hydrogenated Polydecene) or Vegetable Sq...view more
Creasperse® UVA/UVB VS 50 is a ready-to-use pre-dispersed mineral UV filter. It is a composition of ultrafine Titanium Dioxide or Zinc Oxide dispersed in photostable lipids. Standard grades are based on Alphaflow® (Hydrogenated Polydecene) or Vegetable Squalane. view less
Compliance Highlights Available
|
|
Creasperse® UVB HVO 50 | The Innovation Company® |
|
Creasperse® UVB HVO 50 is a ready-to-use pre-dispersed mineral UV filter. It is a composition of ultrafine Titanium Dioxide or Zinc Oxide dispersed in photostable lipids. Standard grades are based on Alphaflow® (Hydrogenated Polydecene) or Vegetable Squal...view more
Creasperse® UVB HVO 50 is a ready-to-use pre-dispersed mineral UV filter. It is a composition of ultrafine Titanium Dioxide or Zinc Oxide dispersed in photostable lipids. Standard grades are based on Alphaflow® (Hydrogenated Polydecene) or Vegetable Squalane. view less
Compliance Highlights Available
|
|
Creasperse® UVB/UVA AF 50 | The Innovation Company® |
|
Creasperse® UVB/UVA AF 50 is a ready-to-use predispersion of rutile type Titanium Dioxide in Hydrogenated Polydecene. It provides high SPF due to its highly loaded and evenly distributed Titanium Dioxide. Creasperse® UV products have maximum concentration...view more
Creasperse® UVB/UVA AF 50 is a ready-to-use predispersion of rutile type Titanium Dioxide in Hydrogenated Polydecene. It provides high SPF due to its highly loaded and evenly distributed Titanium Dioxide. Creasperse® UV products have maximum concentration of solids, hence they offer reliable and consistent UV-protection. view less
Compliance Highlights Available
|
|
Creasperse® UVB/UVA VS 50 | The Innovation Company® |
|
Creasperse® UVB/UVA VS 50 is a ready-to-use predispersion of rutile type Titanium Dioxide in Vegetable Squalane. It provides high SPF due to its highly loaded and evenly distributed Titanium Dioxide. Creasperse® UV products have maximum concentration of s...view more
Creasperse® UVB/UVA VS 50 is a ready-to-use predispersion of rutile type Titanium Dioxide in Vegetable Squalane. It provides high SPF due to its highly loaded and evenly distributed Titanium Dioxide. Creasperse® UV products have maximum concentration of solids, hence they offer reliable and consistent UV-protection. view less
Compliance Highlights Available
|
|
Creaspheres® DIM WL 4 | The Innovation Company® |
|
Creaspheres® DIM WL 4 is based on Polymethylsilsesquioxane, which provides silicone-type skin feel and slip. Creaspheres® DIM products are used in skin and colour care applications as texture enhancers and soft focus agents. It brings wrinkle filling bene...view more
Creaspheres® DIM WL 4 is based on Polymethylsilsesquioxane, which provides silicone-type skin feel and slip. Creaspheres® DIM products are used in skin and colour care applications as texture enhancers and soft focus agents. It brings wrinkle filling benefits into emulsions and creates a smoother appearance on the skin. view less
Compliance Highlights Available
|
|
Creastar® Electrum Gold WL 90 | The Innovation Company® |
|
Creastar® Electrum Gold WL 90 brings exclusive and high-quality pearlescent pigment to all decorative cosmetic applications. Combinations of one, two, or more colors create unique shades and bright color reflections. It is an advanced process, which allow...view more
Creastar® Electrum Gold WL 90 brings exclusive and high-quality pearlescent pigment to all decorative cosmetic applications. Combinations of one, two, or more colors create unique shades and bright color reflections. It is an advanced process, which allows unlimited color mixing. view less
Compliance Highlights Available
|
|
Creastar® Transformation FM Coral Black Colourplus WL 20 | The Innovation Company® |
|
Creastar® Transformation FM Coral Black Colourplus WL 20 brings exclusive and high-quality pearlescent pigment to all decorative cosmetic applications. Combinations of one, two, or more colors create unique shades and bright color reflections. It is an ad...view more
Creastar® Transformation FM Coral Black Colourplus WL 20 brings exclusive and high-quality pearlescent pigment to all decorative cosmetic applications. Combinations of one, two, or more colors create unique shades and bright color reflections. It is an advanced process, which allows unlimited color mixing. view less
Compliance Highlights Available
|
|
Creastar® Transformation FM Fluored Red Blue Colourplus WL 20 | The Innovation Company® |
|
Creastar® Transformation FM Fluored Red Blue Colourplus WL 20 is a pearlescent pigment that provides colour changing effect. When it is applied on the skin, the red base colour transforms to a completely new colour (intense blue). Compatible with aqueous ...view more
Creastar® Transformation FM Fluored Red Blue Colourplus WL 20 is a pearlescent pigment that provides colour changing effect. When it is applied on the skin, the red base colour transforms to a completely new colour (intense blue). Compatible with aqueous systems. view less
Compliance Highlights Available
|
|
Creasterol® CH | The Innovation Company® |
|
Creasterol® CH incorporates C10-30 Cholesterol/Lanosterol Esters. It has a yellow, wax appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Creasterol® II | The Innovation Company® |
|
Creasterol® II is part of a range of film-forming and long-lasting agents. Creasterol® products are complex mixtures of esters and fatty acids derived from wax. Due to its composition being highly similar to the one of human sebum, it enhances skin hydrat...view more
Creasterol® II is part of a range of film-forming and long-lasting agents. Creasterol® products are complex mixtures of esters and fatty acids derived from wax. Due to its composition being highly similar to the one of human sebum, it enhances skin hydration and repair. view less
Compliance Highlights Available
|
|
Creasurf® | The Innovation Company® |
|
Creasurf® is part of a range of surfactant blends, which can be used in various personal care applications, such as facial cleansers, shampoos, or bath products. Creasurf® products provide effective yet mild cleansing and detergency and wetting properties...view more
Creasurf® is part of a range of surfactant blends, which can be used in various personal care applications, such as facial cleansers, shampoos, or bath products. Creasurf® products provide effective yet mild cleansing and detergency and wetting properties. view less
Compliance Highlights Available
|
|
Creasurf® BB | The Innovation Company® |
|
Creasurf® BB is part of a range of surfactant blends, which can be used in various personal care applications, such as facial cleansers, shampoos, or bath products. Creasurf® products provide effective yet mild cleansing and detergency and wetting propert...view more
Creasurf® BB is part of a range of surfactant blends, which can be used in various personal care applications, such as facial cleansers, shampoos, or bath products. Creasurf® products provide effective yet mild cleansing and detergency and wetting properties. view less
Compliance Highlights Available
|
|
CreaWhite® HLC | The Innovation Company® |
|
CreaWhite® HLC incorporates titanium dioxide and hydrogenated lecithin. It has a white, powder appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
CreaYellow® HLC | The Innovation Company® |
|
Creayellow® HLC incorporates iron oxides and hydrogenated lecithin. It has a yellow, powder appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|
|
Eospoly® UV Crystal HB 50% | The Innovation Company® |
|
Eospoly® UV Crystal HB 50% provides UVA and UVB-protection and an instant optical illusion of smoothness and luminosity. The mineral UV-filters are encapsulated into silica spheres. Due to shape and the size of Eospolys, they will fit seamlessly onto the ...view more
Eospoly® UV Crystal HB 50% provides UVA and UVB-protection and an instant optical illusion of smoothness and luminosity. The mineral UV-filters are encapsulated into silica spheres. Due to shape and the size of Eospolys, they will fit seamlessly onto the contours of the skin and create spectacular diffusion. view less
Compliance Highlights Available
|
|
Eospoly® UV TR 22 HB 50 | The Innovation Company® |
|
Eospoly® UV TR 22 HB 50 provides UVA and UVB-protection and an instant optical illusion of smoothness and luminosity. The mineral UV-filters are encapsulated into silica spheres. Due to shape and the size of Eospolys, they will fit seamlessly onto the con...view more
Eospoly® UV TR 22 HB 50 provides UVA and UVB-protection and an instant optical illusion of smoothness and luminosity. The mineral UV-filters are encapsulated into silica spheres. Due to shape and the size of Eospolys, they will fit seamlessly onto the contours of the skin and create spectacular diffusion. view less
Compliance Highlights Available
|
|
Eospoly® UVB/UVA SIL 30 | The Innovation Company® |
|
Eospoly® UVB/UVA SIL 30 is a new generation UV composite based on ultrafine Titanium Dioxide and Silica. It is ideal for all skin and sun care applications, where it brings texture, soft focus and mattifying effect in addition to UV-protection. Eospoly® U...view more
Eospoly® UVB/UVA SIL 30 is a new generation UV composite based on ultrafine Titanium Dioxide and Silica. It is ideal for all skin and sun care applications, where it brings texture, soft focus and mattifying effect in addition to UV-protection. Eospoly® UV composites are especially suitable for O/W emulsions, in which they provide the best light diffusion and UV protection performance. Eospoly® UV can also be used in colour cosmetic, formulations from powders to foundations and lipsticks. view less
Compliance Highlights Available
|
|
Fiflow® AC | The Innovation Company® |
|
Fiflow® AC is a combination of fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. It is designed especially for Anti-Cellulite applications since it can improve the met...view more
Fiflow® AC is a combination of fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. It is designed especially for Anti-Cellulite applications since it can improve the metabolism and renewal or connective tissue. Fiflow® products are stable, inert and heavy liquids and even the most volatile ones are safe to use as they have no flashpoint. They are not ozone depleting materials. view less
Compliance Highlights Available
|
|
Fiflow® BB 61 | The Innovation Company® |
|
Fiflow® BB 61 is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases. It is designed especially to combine fast visible anti-wrinkle results with visual bubbling functions. Fiflow® BB 61 is designed for facial app...view more
Fiflow® BB 61 is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases. It is designed especially to combine fast visible anti-wrinkle results with visual bubbling functions. Fiflow® BB 61 is designed for facial application, serums and masks, as well as cleansing products to enhance the foaming properties. Fiflow® products are stable, inert and heavy liquids and even the most volatile ones are safe to use as they have no flashpoint. They are not ozone depleting materials. view less
Compliance Highlights Available
|
|
Fiflow® BB 76 | The Innovation Company® |
|
Fiflow® BB 76 is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases. Fiflow® BB 76 is designed for facial applications, serums and masks. Fiflow® products are stable, inert and heavy liquids and even the most vol...view more
Fiflow® BB 76 is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases. Fiflow® BB 76 is designed for facial applications, serums and masks. Fiflow® products are stable, inert and heavy liquids and even the most volatile ones are safe to use as they have no flashpoint. They are not ozone depleting materials. view less
Compliance Highlights Available
|
|
Fiflow® BTX | The Innovation Company® |
|
Fiflow® BTX is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. Fiflow® BTX is an ideal ingredient for anti-wrinkle products as it has an instantaneous dermal filli...view more
Fiflow® BTX is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. Fiflow® BTX is an ideal ingredient for anti-wrinkle products as it has an instantaneous dermal filling and muscular relaxation effect. It also provides long-term effects due to its capacity to supply Oxygen to the skin. Fiflow® products are stable, inert and heavy liquids and even the most volatile ones are safe to use as they have no flashpoint. They are not ozone depleting materials. view less
Compliance Highlights Available
|
|
Fiflow® SC | The Innovation Company® |
|
Fiflow® SC is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. Fiflow® SC is designed for skin rejuvenating and regenerating products as it improves the skin renewa...view more
Fiflow® SC is a fully fluorinated medical grade Perfluorocarbons with an incredible capacity to carry gases, notably Oxygen, Nitrogen and Carbon Dioxide. Fiflow® SC is designed for skin rejuvenating and regenerating products as it improves the skin renewal and elasticity. Fiflow® products are stable, inert and heavy liquids and even the most volatile ones are safe to use as they have no flashpoint. They are not ozone depleting materials. view less
Compliance Highlights Available
|
|
GLUCO SS | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
GLUCO SS is a natural glucose derivative, used as an excellent non-ionic W/O emulsifier with special structure. It provides more outstanding safety and emulsifying capacity than any other emulsifier while combines with GLUCO SSE 20, causes no irritation t...view more
GLUCO SS is a natural glucose derivative, used as an excellent non-ionic W/O emulsifier with special structure. It provides more outstanding safety and emulsifying capacity than any other emulsifier while combines with GLUCO SSE 20, causes no irritation to eye and skin. This product has a high efficiency with little dosage and creates an exquisite and lucent appearance. Ideal for application in cream, lotion, massage cream for sensitive skin and baby lotion. view less
Compliance Highlights Available
|
|
GLUCO SSE 20 | Guangzhou Tinci Materials Technology Co.,Ltd. 广州天赐高新材料股份有限公司 |
|
GLUCO SSE 20 is a natural glucose derivative, used as an excellent nonionic W/O emulsifier with special structure. It provides more outstanding safety and emulsifying capacity than any other emulsifier while combines with GLUCO SS, causes irritation to ey...view more
GLUCO SSE 20 is a natural glucose derivative, used as an excellent nonionic W/O emulsifier with special structure. It provides more outstanding safety and emulsifying capacity than any other emulsifier while combines with GLUCO SS, causes irritation to eye and skin. Applications include cream, lotion, massage cream for sensitive skin and baby lotion. view less
Compliance Highlights Available
|
|
Hydrasoft® Cushion | The Innovation Company® |
|
Hydrasoft® Cushion is a water dispersible texture modifier and thickener. It is a transparent gel, which delivers moisture to the skin. It provides a soft and non-sticky film with a fresh after feel. It is ideal for O/W emulsions and water-based systems. ...view more
Hydrasoft® Cushion is a water dispersible texture modifier and thickener. It is a transparent gel, which delivers moisture to the skin. It provides a soft and non-sticky film with a fresh after feel. It is ideal for O/W emulsions and water-based systems. Good alcohol toleration. Not compatible with electrolytes and pH lower than 5 and upper than 7.5. Hydrasoft® Cushion is available preserved with our standard preservative system but it can be preserved also with the preservative system of customer’s choice. view less
Compliance Highlights Unavailable
|
|
Hydrasoft® Moist | The Innovation Company® |
|
Hydrasoft® Moist is a water dispersible texture modifier and thickener. It is a transparent gel, which delivers moisture to the skin. Hydrasoft® Moist is a clear gel which modifies the rheology of formulations and brings moisture to the skin. It forms a s...view more
Hydrasoft® Moist is a water dispersible texture modifier and thickener. It is a transparent gel, which delivers moisture to the skin. Hydrasoft® Moist is a clear gel which modifies the rheology of formulations and brings moisture to the skin. It forms a soft film with a fresh after feel. It is ideal for O/W emulsions and water-based systems. Good alcohol toleration. view less
Compliance Highlights Available
|
|
Hydrasoft® Pine | The Innovation Company® |
|
Hydrasoft® Pine is a water dispersible texture modifier and thickener. It is a transparent gel which delivers moisture and freshness. As it is non-ionic it can be used in both cationic and anionic systems, ideal for hair care formulations. It has a high t...view more
Hydrasoft® Pine is a water dispersible texture modifier and thickener. It is a transparent gel which delivers moisture and freshness. As it is non-ionic it can be used in both cationic and anionic systems, ideal for hair care formulations. It has a high tolerance for alcohol and electrolytes. Not sensitive to heat. Hydrasoft® Pine is available preserved with our standard preservative system but it can be preserved also with the preservative system of customer’s choice. view less
Compliance Highlights Unavailable
|
|
Hydrasoft® Rich | The Innovation Company® |
|
Hydrasoft® Rich is a water dispersible texture modifier and thickener. It is a viscous liquid with a rich and oily feel. It modifies texture by giving a silicone-like feel of richness but with a fresh aqueous after feel. Good alcohol toleration. Not compa...view more
Hydrasoft® Rich is a water dispersible texture modifier and thickener. It is a viscous liquid with a rich and oily feel. It modifies texture by giving a silicone-like feel of richness but with a fresh aqueous after feel. Good alcohol toleration. Not compatible with electrolytes and pH lower than 5 and upper than 7.5. view less
Compliance Highlights Available
|
|
Hydrasoft® Sea | The Innovation Company® |
|
Hydrasoft® Sea is a water dispersible texture modifier and thickener. It is a viscous liquid based on Algae extract, which acts as a film former. It has a high tolerance for electrolytes and some cationic ingredients, which makes is ideal ingredient for h...view more
Hydrasoft® Sea is a water dispersible texture modifier and thickener. It is a viscous liquid based on Algae extract, which acts as a film former. It has a high tolerance for electrolytes and some cationic ingredients, which makes is ideal ingredient for hair applications. It is easy to use as it performs at wide pH area, and it does not require neutralization. Good alcohol toleration. Not compatible with pH lower than 5 and upper than 7.5. Hydrasoft® Sea is available preserved with our standard preservative system but it can be preserved also with the preservative system of customer’s choice. view less
Compliance Highlights Available
|
|
Nordic Beauty® Peat Fine | The Innovation Company® |
|
Nordic Beauty® Peat Fine incorporates peat and xanthan gum. It has a gelatinous colloid appearance and a characteristic odor that is suitable for use in many personal care applications.
Compliance Highlights Available
|