| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...view more 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. view less | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...view more 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. view less | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...view more 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. view less | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...view more 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. view less | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| Alkipol 2250-50 H | Polidur San Luis | Alkipol 2250-50 H is a short oil alkyd emulsion at 50 % solids in water. This product has good air drying properties, excellent final film hardness and gloss and is amine and solvent free. Cero VOC. It is for use in air or forced dried primers and enamels...view more Alkipol 2250-50 H is a short oil alkyd emulsion at 50 % solids in water. This product has good air drying properties, excellent final film hardness and gloss and is amine and solvent free. Cero VOC. It is for use in air or forced dried primers and enamels with cero VOC. view less | |
| Alkipol 307-50 T | Polidur San Luis | Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for elect...view more Alkipol 307-50 T is a short oil alkyd resin based on linseed oil. This product has good air drying properties, excellent hardness and good gloss and elasticity. Alkipol 307-50 T has applications in stoving enamels, fast drying enamels, varnishes for electrical uses, corrosion resistant primers and cellulose nitrate lacquers. view less | |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 ...view more Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. view less | |
| Alkipol 434-50 A | Polidur San Luis | Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost d...view more Alkipol 434-50 A is a medium oil alkyd resin based on soya-bean oil at 50% in white spirit. This product has good yelowing resistance properties, good air dry and final film hardness and good gloss and elasticity. Alkipol 434-50 A is for use in low cost decorative enamels and undercoats, corrosion resistant primers, air drying and stoving primers and topcoats for industrial applications. view less | |
| Alkipol 469-100 | Polidur San Luis | Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking pa...view more Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking paints. view less | |
| CHS-Alkyd AKS 281 X 60 | Spolchemie | CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less | |
| CHS-Alkyd AL 2900 | Spolchemie | CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd ...view more CHS-Alkyd AL 2900 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from linoleic rich fatty acids and has a low viscosity 60% solution in xylene. The oil length for this product is estimated to be around 30%. CHS-Alkyd AL 2900 is primarily used for fast drying high performance topcoats and industrial primers. view less | |
| CHS-Alkyd AL 3220 | Spolchemie | CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to...view more CHS-Alkyd AL 3220 is a clear short oiled alkyd resin binder for solvent borne coatings. This product is made from coconut oil fatty acids and is provided as a low viscous 75% solution in methyl ethyl ketone. The oil length for this product is estimated to be around 32%. CHS-Alkyd AL 3220 is primarily used for non-yellowing coatings for wood and metal surfaces. view less | |
| CHS-Alkyd AL 3701 | Spolchemie | CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...view more CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. view less | |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...view more CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| CHS-Alkyd C 351 E 75 | Spolchemie | CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated ...view more CHS-Alkyd C 351 E 75 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 75% solution in butyl acetate. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 E 75 is primarily used for stove coatings and paints constructed on nitrocellulose. view less | |
| CHS-Alkyd C 351 X 60 | Spolchemie | CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be a...view more CHS-Alkyd C 351 X 60 is a clear short oiled alkyd binder for low yellowing stove solvent borne coatings. This product is made from fatty acids and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 39%. CHS-Alkyd C 351 X 60 is primarily used for stove coatings and paints fabricated on nitrocellulose. view less | |
| CHS-Alkyd LUR 740 NN 80 | Spolchemie | CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. view less | |
| CHS-Alkyd M 552 WX 60 | Spolchemie | CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder...view more CHS-Alkyd M 552 WX 60 is a medium oiled modified binder with high adhesion for solvent borne coatings. This product is made from linseed oil and has low viscosity 60 percent solution in mixture of white spirit and xylene. CHS-Alkyd M 552 WX 60 is a binder for producing universal coatings. This product is primarily used in formulations for anti-corrosive priming coats that are combined with chlorinated rubber and phenolic resins or amino resins. view less | |
| CHS-Alkyd S 401 X 55 | Spolchemie | CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 55 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 55 is primarily used for air-drying anti-corrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 401 X 60 | Spolchemie | CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 40...view more CHS-Alkyd S 401 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 40%. CHS-Alkyd S 401 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. view less | |
| CHS-Alkyd S 471 WX 55 | Spolchemie | CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is...view more CHS-Alkyd S 471 WX 55 is a medium oiled binder with low lift effect to substrate for solvent coatings. This product is made from soybean oil. It is provided as a medium viscous 55% solution in a mixture of white spirit and xylene. CHS-Alkyd S 471 WX 55 is primarily used for producing priming paints, enamels and quick drying coatings and lacquers. view less | |
| CHS-Alkyd S 471 X 60 | Spolchemie | CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 47...view more CHS-Alkyd S 471 X 60 is a short oiled universal binder for solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 60% solution in xylene. The oil length for this product is estimated to be around 47%. CHS-Alkyd S 471 X 60 is primarily used for air-drying anticorrosion coatings on metal surfaces. For coating compositions provided in aerosol containers. view less | |
| CHS-Alkyd S 491 W 55 | Spolchemie | CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W ...view more CHS-Alkyd S 491 W 55 is a medium oil alkyd resin for solvent borne coatings. This product is made from soybean oil and is provided as a medium viscous 55% solution in white spirit. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 W 55 is primarily used for manufacture in primer coatings for metal surfaces. view less | |
| CHS-Alkyd S 491 WB 55 | Spolchemie | CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this prod...view more CHS-Alkyd S 491 WB 55 is a medium oiled alkyd resin binder for aromatic free solvent borne coatings. This product is made from soybean oil and is provided as a low viscous 55% solution in a mixture of white spirit and butanol. The oil length for this product is estimated to be 49%. CHS-Alkyd S 491 WB 55 is used for primers, white coatings and lacquers on metal surfaces. view less | |
| CHS-Alkyd S 618 W 80 | Spolchemie | CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood...view more CHS-Alkyd S 618 W 80 is a long oiled binder with adhesion and hardness for high solid alkyd resin coatings and is made from soybean oil. This product has a high viscosity and 80% solution is in white spirit. CHS-Alkyd S 618 W 80 is primarily used for wood and metal paints that are intended for being applied on exterior surfaces. view less | |
| CHS-Alkyd S 621 W 60 | Spolchemie | CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in w...view more CHS-Alkyd S 621 W 60 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 60 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd S 622 N 60 | Spolchemie | CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic ...view more CHS-Alkyd S 622 N 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin from pentaerythritol and phtalic acid and is modified by soybean oil. 60 percent of the solution is de-aromatized white spirit. The aromatic content is just under one percent. This product is primarily used for air-drying coatings, enamels, lacquers and wood stains for exteriors and interiors. view less | |
| CHS-Alkyd S 622 W 55 | Spolchemie | CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in w...view more CHS-Alkyd S 622 W 55 is a long oiled universal binder for solvent borne coatings. Is an air-drying alkyd resin from pentaerythritol and phthalic acid and is modified by soybean oil. This alkyd resin has low viscosity and 55 percent of the solution is in white spirit. This product is primarily used for air-drying top-coats for interior and exterior use on wood and metal surfaces. view less | |
| CHS-Alkyd S 623 NN 50 | Spolchemie | CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher...view more CHS-Alkyd S 623 NN 50 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 50 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. view less | |
| CHS-Alkyd S 623 NN 60 | Spolchemie | CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher...view more CHS-Alkyd S 623 NN 60 is a long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 60 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. Aromatic content is just under 1 percent. The primary use for this product is for environmentally friendly air-drying coatings that can be used on interiors and exteriors. view less | |
| CHS-Alkyd S 652 NN 70 | Spolchemie | CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash poi...view more CHS-Alkyd S 652 NN 70 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 652 NN 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 653 W 70 | Spolchemie | CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily use...view more CHS-Alkyd S 653 W 70 is a long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has high viscosity and 70 percent solution in white spirit. CHS-Alkyd S 653 W 70 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd S 670 NN 75 | Spolchemie | CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash p...view more CHS-Alkyd S 670 NN 75 is a long oiled universal binder for solvent born coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 75 percent solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under one percent. CHS-Alkyd S 670 NN 75 is primarily used for air-drying wood and metal coatings for interior and exterior use. view less | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...view more CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. view less | |
| CHS-Alkyd SU 621 N 50 | Spolchemie | CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic conte...view more CHS-Alkyd SU 621 N 50 is a urethane long oiled universal binder for solvent borne coatings. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 50 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. view less | |
| CHS-Alkyd SU 632 N 60 | Spolchemie | CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is ju...view more CHS-Alkyd SU 632 N 60 is a urethane long oiled universal binder with high hardness. It is an air-drying alkyd resin modified from soybean oil. This alkyd resin has low viscosity and 60 percent solution in de-aromatized white spirit. Aromatic content is just under 1 percent. This product is primarily used for fast air-drying coatings, enamels and transparent varnishes for interior and exterior uses on wood. It provides gloss and water resistance. view less | |
| CHS-Alkyd SU 671 W 60 | Spolchemie | CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is ...view more CHS-Alkyd SU 671 W 60 is a urethane long oiled binder for solvent borne coatings. This product is an air-drying alkyd resin modified from soybean oil. This alkyd resin has medium viscosity and 60 percent solution in white spirit. CHS-Alkyd SU 671 W 60 is primarily used for fast air-drying coatings for interior and exterior applications. view less | |
| CHS-Alkyd SUR 735 NN 80 | Spolchemie | CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd SUR 735 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 73%. CHS-Alkyd SUR 735 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anti-corrosion. view less | |
| CHS-Alkyd T 501 WX 55 | Spolchemie | CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating ...view more CHS-Alkyd T 501 WX 55 is a medium oiled binder for solvent borne coatings. This product is made from tall oil fatty acids and has low viscosity 55 percent solution in a mixture of white spirit and xylene. CHS-Alkyd T 501 WX 55 is a driver for formulating all purpose coatings to improve weathering and UV resistance, due to its low yellowing tendency. view less | |
| CHS-Alkyd TI 870 | Spolchemie | CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 ...view more CHS-Alkyd TI 870 is a long oiled alkyd binder for high solid coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 87%. CHS-Alkyd TI 870 is primarily used for economical coatings for wood and metal surfaces. It also is used as a binder for printing inks and pigment pastes. view less | |
| CHS-Alkyd TRI 841 | Spolchemie | CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for thi...view more CHS-Alkyd TRI 841 is a long oiled alkyd fast drying binder for low yellowing high solid coatings. This product is made from tall oil fatty acids (TOFA) and dehydrated castor oil (DCO). It is provided as a medium viscous 100% liquid. The oil length for this product is estimated to be around 84%. CHS-Alkyd TRI 841 is primarily for stains, penetrates and topcoats for metal and wood surfaces. It is also used as a binder in printing inks and pigment pastes. This product can be used as a reactive diluent for solvent borne to drop viscosity and VOC levels. view less | |
| CHS-Alkyd Trim 551 W 85 | Spolchemie | CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primar...view more CHS-Alkyd Trim 551 W 85 is a medium oiled high solid alkyd resin coating made from tall oil fatty acids and dehydrated castor oil. Oil length is estimated to be 55% but capable of being mixed with long oil alkyds to improve drying and hardness. The primary use for this product is for fast drying protective metal and wood coatings that have high hardness with hard lacquers, anticorrosive paints and varnishes. view less | |
| CHS-Alkyd TU 341 X 60 | Spolchemie | CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for...view more CHS-Alkyd TU 341 X 60 is a urethane short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and dimer fatty acids (DFA) and is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be 34%. CHS-Alkyd TU 341 X 60 is primarily used as a high performance anti-corrosion primer, paints and coatings; that has improved weather resistance on iron and light metal surfaces. view less | |
| CHS-Alkyd TU 497 X 55 | Spolchemie | CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimat...view more CHS-Alkyd TU 497 X 55 is a clear urethane medium oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is provided as a low viscous 55% solution in xylene. The oil length for this product is estimated to be around 49%. CHS-Alkyd TU 497 X 55 is primarily used for producing of industrial coatings on metal surfaces and improves resistance to corrosion and weathering. view less | |
| FOR85 | Forchem | FOR85 is an unmodified tall oil rosin (TOR) product with the right content of abietic type rosin acids for various purposes. This product is an excellent base rosin to be upgraded for various end uses like paper sizes, printing ink binders, and adhesive r...view more FOR85 is an unmodified tall oil rosin (TOR) product with the right content of abietic type rosin acids for various purposes. This product is an excellent base rosin to be upgraded for various end uses like paper sizes, printing ink binders, and adhesive resins. view less | |
| FOR90 | Forchem | FOR90 is an unmodified tall oil rosin (TOR) product with a higher content of abietic type rosin acids. This product is an excellent base rosin to be upgraded for various end uses like printing ink binders and adhesive resins. | |
| Inokem EXP 5101 | Ecoat Sas | Inokem EXP 5101 is an anionic emulsion of alkyd resins modified with LeafTech crosslinking technology. It is yellowish in color and features improved resistance to hydrolysis. This product is designed as a binder for applications such as low-VOC matte, sh...view more Inokem EXP 5101 is an anionic emulsion of alkyd resins modified with LeafTech crosslinking technology. It is yellowish in color and features improved resistance to hydrolysis. This product is designed as a binder for applications such as low-VOC matte, sheen, coating, and semi gloss paint formulations, as well as metal adhesives where resistance to hydrolysis (high pH) is required. view less | |
| Novalkyd L1033-70WS | Novaresine S.r.l | Novalkyd L1033-70WS is a siccative long oil alkyd resin that provides excellent gloss retention, as well as good flow and corrosion resistance properties. This product is mainly designed for full-tone brusing enamels; it can also be used in flatting varni...view more Novalkyd L1033-70WS is a siccative long oil alkyd resin that provides excellent gloss retention, as well as good flow and corrosion resistance properties. This product is mainly designed for full-tone brusing enamels; it can also be used in flatting varnishes and metal putties. view less | |
| Novalkyd L1560-60WS | Novaresine S.r.l | Novalkyd L1560-60WS is a specialized, drying-type long oil alkyd resin. This product suitable for impregnations & paints for porous surfaces; ventilating primers & paints; and wood stains, primers, sealers, & protective coatings. | |
| Novalkyd L1664-60ANWS | Novaresine S.r.l | Novalkyd L1664-60ANWS is a long oil alkyd that is ideally suited as the sole binder for the production of ventilating primers and ventilating pigmented paints for wet substrates, wood protection and primers and sealers. It is also suitable for impregnatio...view more Novalkyd L1664-60ANWS is a long oil alkyd that is ideally suited as the sole binder for the production of ventilating primers and ventilating pigmented paints for wet substrates, wood protection and primers and sealers. It is also suitable for impregnations and paints on wood and porous substrates. view less | |
| Novalkyd M1005-50AN | Novaresine S.r.l | Novalkyd M1005-50AN is a medium oil siccative alkyd resin that is suitable for low cost enamels, displaying good overall performance as far as drying and color retention properties. It is also ideal for wood flatting, sealers and anti-rust primers. | |
| Novalkyd S1233-70BA | Novaresine S.r.l | Novalkyd S1233-70BA is a siccative short oil alkyd phenolic modified resin that displays good hardness, flexibility and chemical resistance properties. This makes it ideal for fast curing varnishes, along with industrial high-quality enamels, anti-rust pr...view more Novalkyd S1233-70BA is a siccative short oil alkyd phenolic modified resin that displays good hardness, flexibility and chemical resistance properties. This makes it ideal for fast curing varnishes, along with industrial high-quality enamels, anti-rust primers and sandable sealers for wood and metal. view less | |
| Novalkyd S2013-75BA | Novaresine S.r.l | Novalkyd S2013-75BA is a non-drying short oil alkyd resin that excels in nitrocellulose systems; providing good solvent release even in thick films, gloss, good sandability, as well as flexibility and transparency. Because of its fast drying features, it ...view more Novalkyd S2013-75BA is a non-drying short oil alkyd resin that excels in nitrocellulose systems; providing good solvent release even in thick films, gloss, good sandability, as well as flexibility and transparency. Because of its fast drying features, it is ideal for use in wood industrial cycle applications - especially lacquers. When used with isocyanate prepolymers, it yeilds fast-drying and easily-sandable sealers and top coats. view less | |
| Polytone AP 108 | Polyols and Polymers | Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...view more Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 108 is primarily used as an additive for rubber, upholstery, shoe, leather and many other types of adhesives. It is also used as an additive in coatings that provide strength and heat resistance. view less | |
| Polytone AP 109 | Polyols and Polymers | Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...view more Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 109 is primarily used to impart good open time combined with green tack and durability, and provides some heat resistance similar to Polytone AP 108 but not as strong of resistance. Polytone AP 109 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. view less | |
| Polytone AP 110 | Polyols and Polymers | Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...view more Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 110 is primarily used to impart good open time combined with green tack and durability, and provides heat resistance. Polytone AP 110 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. view less | |
| R-114 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-114 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-114 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This resin is used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| R-115 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-115 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-115 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has a white spirit solvent. This resin is also used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| R-116 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-116 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-116 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has SBP6 as a solvent. This resin is also used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| R-242 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-242 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-242 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has SBP6 as a solvent. This resin is also used in the formulation of spray applications included those used in stoving and industrial systems. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| R-280 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-280 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-280 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has 260-290 dist as a solvent. This resin is also used in the formulation of ink, clear base coats. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| R-281 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-281 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...view more R-281 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has 260-290 dist as a solvent. This resin is also used in the formulation of clear ink varnishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). view less | |
| Secoia EXP 503-C6 | Ecoat Sas | Secoia EXP 503-C6 is an anionic aqueous dispersion of tall oil fatty acid (TOFA)-based alkyd resins, modified with LeafTech cross-linking technology. It is APEO-free, slightly yellowish in appearance, and composed of 95% renewable materials. This product ...view more Secoia EXP 503-C6 is an anionic aqueous dispersion of tall oil fatty acid (TOFA)-based alkyd resins, modified with LeafTech cross-linking technology. It is APEO-free, slightly yellowish in appearance, and composed of 95% renewable materials. This product is designed for use as a binder in flooring adhesives as well as low-VOC matte, sheen, and satin paint applications. view less | |
| Toluene | Petkim Petrokimya Holding A.S. | Toluene, in the form of a clear aromatic scented liquid, is a solvent used in the production of chemicals in the paint and adhesive industries. It has a molecular weight of 92.14 g/mol and is soluble in diethyl ether, acetone, ethanol, glacial acetic acid...view more Toluene, in the form of a clear aromatic scented liquid, is a solvent used in the production of chemicals in the paint and adhesive industries. It has a molecular weight of 92.14 g/mol and is soluble in diethyl ether, acetone, ethanol, glacial acetic acid, and more. view less |
