| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...view more Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. view less | |
| Epoxies® 20-3064 NC | Epoxies, Etc. | Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3...view more Epoxies® 20-3064 NC is a filled, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. view less | |
| Tackwhite HT 200 NC | Ichemco | Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where...view more Tackwhite HT 200 NC is a waterborne, acrylic pressure sensitive adhesive. This product has a total solids content of 48-52%, a tack of 7 cm, and a peel of 700 g/in. Tackwhite HT 200 NC is most commonly used in double-sided tape and tape applications where the tape must be removed without adhesive transfer on the contact surface. view less | |
| Epoxies® 70-3812 NC | Epoxies, Etc. | Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulate...view more Epoxies® 70-3812 NC is a two part, aluminum filled, high thermal transfer epoxy. Primarily used for the production of heat resistant tools, parts, or bonds that require the highest thermal conductivity and heat resistance. Epoxies® 70-3812 NC is formulated with a unique combination of fillers, particle sizes and dispersion techniques. It is well suited for use with a variety of heat sink applications and its viscosity is particularly good for Fin bonding. view less | |
| Epoxies® 20-3064 NC LV | Epoxies, Etc. | Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Sho...view more Epoxies® 20-3064 NC LV is a low viscosity, flexible epoxy potting compound and adhesive, developed to give the end user the ability to control the hardness of the cured casting. By varying the mix ratio the hardness can be varied from 60 Shore A to 85 Shore D. 20-3064 NC provides excellent thermal shock resistance and outstanding adhesion. view less | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| WorléeKyd C 640 | Worlée-Chemie G.m.b.H. | WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of sho...view more WorléeKyd C 640 is a short oil, non-drying alkyd intended for use with nitrocellulose for the manufacture of high quality modified nitrocellulose finishes. This grade has a non-volatile content of 60% ±1. W´Kyd C 640 is compatible with the majority of short and medium oil length drying and non-drying alkyds. W´Kyd C 640 is particularly suitable for the manufacture of high quality nitrocellulose finishes for wood and paper. The solvent release is very fast. view less | |
| NQ SOLVE | Companhia Nitro Quimica Brasileira | NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can...view more NQ SOLVE is a line of products designed to allows our customers to achieve productivity improvements in the process of dissolving nitrocellulose in the cotton format. By choosing the NQ SOLVE line, our customers have access to customized solutions and can promptly formulate clear and pigmented basecoats. The NQ SOLVE line consists of solutions derived from our nitrocellulose portfolio with several options in solvents, such as ethyl acetate, butyl acetate, methyl ethyl ketone, xylene and acetone, among others. The solutions can be formulated according to customer-specific requirements in all applications where the nitrocellulose is used. view less | |
| NQ SYSTEM+ | Companhia Nitro Quimica Brasileira | NQ SYSTEM+ is a line of products which offers systems containing nitrocellulose for formulating paints and varnishes. This high performance product line delivers excellent improvements in productivity and competitiveness, as it consists of semifinished pr...view more NQ SYSTEM+ is a line of products which offers systems containing nitrocellulose for formulating paints and varnishes. This high performance product line delivers excellent improvements in productivity and competitiveness, as it consists of semifinished products comprising nitrocellulose, solvents, plasticizers and complementary resins. It is an outstanding offering as it allows our customers the elimination of several individual solubilization and mixing processes, thereby granting significant performance improvements. view less | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Diluente 70/30 | Ichemco | Diluente 70/30 is a solvent blend of 70% ethyl alcohol and 30% ethyl acetate. This product is most commonly used in nitrocellulose ink dilution applications. | |
| NQ SYSTEM | Companhia Nitro Quimica Brasileira | NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, cus...view more NQ SYSTEM is a line of products designed to optimize the productivity in paint and varnish manufacturing processes, as it incorporates plasticizers into nitrocellulose solutions, providing to our customers access to semifinished systems. In this line, customers will also find a wide variety of products tailored to the characteristics and applications of their industry segments. The use of plasticizers imparts greater elasticity to nitrocellulose, while improving the adhesion of paints and coatings to the substrates to which they are applied. view less | |
| Unikopak-4 | D.S.V. Chemicals Pvt. Ltd. | Unikopak-4 is a polyurethane resin. This product is a non-reactive polymer. It is suitable for gravure reverse printing laminating polyester inks which have good compatibility with nitrocellulose. | |
| Disvamide-610 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-610 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polythene and polyethylene. | |
| Disvamide-611 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-611 is a non-reactive polyamide resin. This product is soluble in alcohol and compatible with nitrocellulose. It can be used in flexo and gravure inks for treated polyethylene and polypropylene. | |
| Rexin K 6258 | S.A.P.I.C.I. SpA | Rexin K 6258 is a branched saturated polyester resin that is soluble in ethyl acetate. This product is compatible with nitrocellulose, urea and melamine resins. It can be used in the formulation of inks and overprint varnishes. | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...view more Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. view less | |
| Polurene AC510 | S.A.P.I.C.I. SpA | Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This produ...view more Polurene AC510 is an aromatic isocyanurate. This product is highly compatible with nitrocellulose, aromatic solvents, saturated polyesters, hydroxide acrylic and vinyl resins. It can be used in sealers and topcoats for wood, metal and paper. This product contains less than .7% TDI isocyanates. view less | |
| Ucopol M 33/65 K | S.A.P.I.C.I. SpA | Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overpr...view more Ucopol M 33/65 K is an aromatic moisture-curing polyurethane resin. This product has good wetting of different substrates and inks, and is compatible with alkyds, saturated polyester resins, nitrocellulose and vinyl co-polymers. It can be used in overprint varnishes and flexographic processes. view less | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...view more Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. view less | |
| Redur MA 60 | Respol Resinas | Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14...view more Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14-22 mg of potassium hydroxide per gram. view less | |
| Polurgreen ES | S.A.P.I.C.I. SpA | Polurgreen ES is a low-viscosity polyurethane adduct. This product dries quickly. It can be used in polyurethane sealers and topcoats with high solids content. This product's high nitrocellulose facilitates good cross-linking with higher hydroxide cont...view more Polurgreen ES is a low-viscosity polyurethane adduct. This product dries quickly. It can be used in polyurethane sealers and topcoats with high solids content. This product's high nitrocellulose facilitates good cross-linking with higher hydroxide content resins. Polurgreen ES contains less than .5% TDI isocyanates. view less | |
| Flex-Rez™ 3370 CS C | Lawter | Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint var...view more Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint varnishes and in gravure and flexographic inks. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Tertac TT N320 | Respol Resinas | Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its ...view more Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
| Redur MA 410 | Respol Resinas | Redur MA 410 is a resin that can be used in nitrocellulose or alcohol-based varnishes for wood, metal and paper. This product confers high gloss and good hardness. Its softening point ranges between 130-140 degrees Celsius and its acid value ranges betw...view more Redur MA 410 is a resin that can be used in nitrocellulose or alcohol-based varnishes for wood, metal and paper. This product confers high gloss and good hardness. Its softening point ranges between 130-140 degrees Celsius and its acid value ranges between 115-140 mg of potassium hydroxide per gram. view less | |
| Tertac TT N340 | Respol Resinas | Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its...view more Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its acid value is less than 35 mg of potassium hydroxide per gram. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Novalkyd S1023-50S100 | Novaresine S.r.l | Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose...view more Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose, it provides high gloss and non-yellowing features. view less | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Sintopol DP 50/100% | Sintochem s.r.l. | Sintopol DP 50/100% is garnder in color and is a aromatic polyurethane, not reactive, apt as immigrating polymeric plasticizer for inks. This product is soluble in esthers, ketones alcohols and aromatic solvents, and it has compatibility with the primary DOP, DBP, citrates, nitrocellulose...view more Sintopol DP 50/100% is garnder in color and is a aromatic polyurethane, not reactive, apt as immigrating polymeric plasticizer for inks. This product is soluble in esthers, ketones alcohols and aromatic solvents, and it has compatibility with the primary DOP, DBP, citrates, nitrocellulose and maleic resins. This product is primarily used as a resin for paints and coatings. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| Novalkyd S1022-60X | Novaresine S.r.l | Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose...view more Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose, it exhibits non-yellowing features, along with high gloss in flexible lacquers and enamels. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...view more Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. view less | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...view more Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. view less | |
| Sintopol MD 100/80% E.A. | Sintochem s.r.l. | Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose...view more Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/80% E.A. is primarily used in inks, paints and coatings. view less | |
| Sintopol SP 75/80% E.A. | Sintochem s.r.l. | Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flex...view more Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less | |
| Sintopol SP 75 LV/80% E.A. | Sintochem s.r.l. | Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure an...view more Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less | |
| Sintopol MD 100/100% | Sintochem s.r.l. | Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This lasticizing resin is in nitrocellulose...view more Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This lasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/100% is primarily used in inks, paints and coatings. view less | |
| Sintopol MD 95/75% E.A. | Sintochem s.r.l. | Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose...view more Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 95/75% E.A. is primarily used in inks, paints and coatings. view less | |
| Sintopol MD 120/60% E.A. | Sintochem s.r.l. | Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined with nitrocellulose...view more Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined with nitrocellulose film formers in formulating gravure and flexographic inks with good adhesive properties on various films. Sintopol MD 120/60% E.A. is primarily used in inks, paints and coatings and provides resistance to scratches and with a superior heat seal resistance. view less | |
| Sintopol MD 95/100% | Sintochem s.r.l. | Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and polypropylene. It is a plasticizing resin in nitrocellulose...view more Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and polypropylene. It is a plasticizing resin in nitrocellulose based systems with good adhesion, low odor and good temperature resistance. Usually the use in the formula of polypropylene micro-crystalline waxes is suggested. Sintopol MD 95/100% is primarily used as an additive in inks, paints and coatings. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less |
