| WorléeKyd C 632 M | Worlée-Chemie G.m.b.H. | WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An additi...view more WorléeKyd C 632 M is a modified short oil alkyd resin for the manufacture of PVC resistant NC combination lacquers and paints. W´Kyd C 632 M is used in combination with nitrocellulose for the manufacture of PVC resistance NC-lacquers and paints. An addition of urea resin and acid catalyst is not necessary. view less | |
| Disvimol-102 | D.S.V. Chemicals Pvt. Ltd. | Disvimol-102 is a rosin derivative that has been modified with maleic acid. This product is oil-soluble and compatible with nitrocellulose substrates. It can be used in nitrocellulose lacquers and putty, in vinyl lacquers, and in flexographic inks. | |
| WorléeKyd C 641 | Worlée-Chemie G.m.b.H. | WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick...view more WorléeKyd C 641 is an extremely low viscous, alkyd resin used with nitrocellulose for clear and pigmented nitrocellulose lacquers, and acid curing coatings for wood, foil, and paper. This grade has a non-volatile content of 70% ± 1. It exhibits very quick solvent release, good recoatability at any time and very good yellowing resistance. view less | |
| WorléeSin MK 223 | Worlée-Chemie G.m.b.H. | WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds an...view more WorléeSin MK 223 is an internally plasticized maleic resin intended for use in high quality nitrocellulose lacquers having good cold check resistance and rapid solvent release. W´Sin MK 223 is compatible with nitrocellulose, non-drying short oil alkyds and urea formaldehyde resins. Even small quantities of W´Sin MK 223 in these lacquers improve hardness, scratch resistance and film build. view less | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Disvalkyd-544 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-544 is an alkyd resin made with short-length oils. This product derives from diluted crude oil and glycerine polyols. It can be used in stoving enamels, and nitrocellulose paints, primers, and putty. | |
| Disvalkyd-540 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-540 is an alkyd resin made with short-length oils. This product derives from castor oil and glycerine polyols. It can be used in roller-coated hard-water white varnishes, nitrocellulose primers and putty. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| Disvaket-100 | D.S.V. Chemicals Pvt. Ltd. | Disvaket-100 is a ketonic resin. This product has a melting point range of 85-95 degrees Celsius. It can be used in flexo and gravure inks for polypropylene and BOPP, as well as in nitrocellulose lacquers and paper varnishes. | |
| Rexin 143 | S.A.P.I.C.I. SpA | Rexin 143 is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Novalkyd S1342-60X | Novaresine S.r.l | Novalkyd S1342-60X is a modified saturated polyester resin that shows good flexibility in nitrocellulose or PU systems and in combination with isocyanates, displays good mechanical properties. The resin is ideal for use in PU base coats or top coats. | |
| Polurene HR.B.S. | S.A.P.I.C.I. SpA | Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% T...view more Polurene HR.B.S. is an isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. Polurene HR.B.S. is compatible with nitrocellulose. It contains less than .5% TDI isocyanates. view less | |
| Rexin DP 343 | S.A.P.I.C.I. SpA | Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings...view more Rexin DP 343 is a saturated polyester resin. This product dries quickly with good solvent release, flexibility, and high wetting properties. It can be used in pigmented sealers and topcoats. It can also be used in nitrocellulose or acid-curing coatings. view less | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...view more Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. view less | |
| Rexin 143/70 AB | S.A.P.I.C.I. SpA | Rexin 143/70 AB is a short-oil alkyd resin. This product dries quickly with good flexibility, solvent release, and high wetting properties. It can be used in pigmented sealers or topcoats. It can also be used in nitrocellulose or acid-curing systems. | |
| Novalkyd S1224-60XBT | Novaresine S.r.l | Novalkyd S1224-60XBT is a drying, non-yellowing short oil alkyd resin that shows good adhesion and chemical resistance to water and solvents. It is recommended for fast drying enamels or low-temperature backing enamels. Novalkyd S1224-60XBT is also ideal for nitrocellulose...view more Novalkyd S1224-60XBT is a drying, non-yellowing short oil alkyd resin that shows good adhesion and chemical resistance to water and solvents. It is recommended for fast drying enamels or low-temperature backing enamels. Novalkyd S1224-60XBT is also ideal for nitrocellulose varnishes. view less | |
| Polurene AD | S.A.P.I.C.I. SpA | Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less...view more Polurene AD is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. Polurene AD contains less than .5% TDI isocyanates. view less | |
| Polurene AD 67 | S.A.P.I.C.I. SpA | Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains...view more Polurene AD 67 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. view less | |
| Polurene AD 67 AB LV | S.A.P.I.C.I. SpA | Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product co...view more Polurene AD 67 AB LV is a polyurethane adduct with low free TDI content. THis product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product contains less than .5% TDI isocyanates. view less | |
| Redur MA 60 | Respol Resinas | Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14...view more Redur MA 60 is a fumaric resin esterified adduct that can be used in nitrocellulose or oleoresinous varnishes and nitrosynthetic lithographic inks. This product's softening point ranges between 100-110 degrees Celsius and its acid value ranges between 14-22 mg of potassium hydroxide per gram. view less | |
| Rexin DP 328 | S.A.P.I.C.I. SpA | Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used ...view more Rexin DP 328 is a saturated polyester resin. This product has good abrasion resistance with good filling and solvent release. It can be used in clear or pigmented 2K polyurethane coatings. This product is compatible with nitrocellulose and can be used in combination with urea or melamine resins. view less | |
| Polurgreen AD-01 | S.A.P.I.C.I. SpA | Polurgreen AD-01 is a polyurethane adduct that can be used in 2K varnishes and enamels. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic and vinyl resins. It is composed of less than .1% TDI isocyanates. Polu...view more Polurgreen AD-01 is a polyurethane adduct that can be used in 2K varnishes and enamels. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic and vinyl resins. It is composed of less than .1% TDI isocyanates. Polurgreen AD-01 can be used in coatings. view less | |
| Novalkyd S1174-65BA | Novaresine S.r.l | Novalkyd S1174-65BA is a non-drying short oil alkyd that is used whenever hardness, color retention and reactivity are required. Because of its good compatibility with nitrocellulose systems, alkyd resin and isocyanate and due to its reactivity, it is the...view more Novalkyd S1174-65BA is a non-drying short oil alkyd that is used whenever hardness, color retention and reactivity are required. Because of its good compatibility with nitrocellulose systems, alkyd resin and isocyanate and due to its reactivity, it is the suggested resin for creating stackable matt top coats. view less | |
| Flex-Rez™ 3370 CS C | Lawter | Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint var...view more Flex-Rez™ 3370 CS C is a co-solvent polyamide resin that provides good adhesion and gel resistant properties to various treated films. It also shows better nitrocellulose compatibility than other co-solvent resins. The product can be used in overprint varnishes and in gravure and flexographic inks. view less | |
| Polurgreen AD AB-01 | S.A.P.I.C.I. SpA | Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% ...view more Polurgreen AD AB-01 is a polyurethane adduct. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols and vinyl resins. It can be used in 2K varnishes, enamels, and coatings. It is composed of less than .1% TDI isocyanates and is based in a butyl-acetate solvent. view less | |
| Surkopak® 5255 | BIP (Oldbury) Ltd | Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5255, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5244. view less | |
| Surkopak® 5241 | BIP (Oldbury) Ltd | Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5241, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a solvent free version SP 5244. view less | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...view more Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. view less | |
| Surkopak® 5244 | BIP (Oldbury) Ltd | Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5244, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. General purpose, flexo-graphic and gravure inks. view less | |
| Surkopak® 5311 | BIP (Oldbury) Ltd | Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5311, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is a harder version of SP 5323. view less | |
| Coconut-Oil Based Short Oil Alkyd Resin | Tianyi Chemical Engineering Material Co., Ltd. | Coconut-Oil Based Short Oil Alkyd Resin, in the form of a waterborne, white viscous liquid, is an additive that can be used in polyester urethane gloss coatings, polyester surface coatings, acid-cured paints, and nitrocellulose coatings. This product dri...view more Coconut-Oil Based Short Oil Alkyd Resin, in the form of a waterborne, white viscous liquid, is an additive that can be used in polyester urethane gloss coatings, polyester surface coatings, acid-cured paints, and nitrocellulose coatings. This product dries quickly, and the end product will have high gloss and resistance to yellowing. view less | |
| Surkopak® 5245 | BIP (Oldbury) Ltd | Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5245, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has improved alcohol tolerance compared to SP 5244. view less | |
| Surkopak® 5246 | BIP (Oldbury) Ltd | Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 5246, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has lower solids and viscosity compared to SP 5245. view less | |
| Tertac TT N320 | Respol Resinas | Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its ...view more Tertac TT N320 is a maleic resin that can be used in nitrocellulose varnishes and oleoresinous varnishes. This product improves gloss, colour retention, and adhesion in the end product. Its softening point ranges between 115-125 degrees Celsius and its acid value is less than 30 mg of potassium hydroxide per gram. view less | |
| Redur MA 410 | Respol Resinas | Redur MA 410 is a resin that can be used in nitrocellulose or alcohol-based varnishes for wood, metal and paper. This product confers high gloss and good hardness. Its softening point ranges between 130-140 degrees Celsius and its acid value ranges betw...view more Redur MA 410 is a resin that can be used in nitrocellulose or alcohol-based varnishes for wood, metal and paper. This product confers high gloss and good hardness. Its softening point ranges between 130-140 degrees Celsius and its acid value ranges between 115-140 mg of potassium hydroxide per gram. view less | |
| Tertac TT N340 | Respol Resinas | Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its...view more Tertac TT N340 is a maleic resin that can be used in nitrocellulose varnishes. This product improves gloss, colour retention, adhesion and hardness sanding properties in the end product. Its softening point ranges between 130-140 degrees Celsius and its acid value is less than 35 mg of potassium hydroxide per gram. view less | |
| Surkopak® 2135 | BIP (Oldbury) Ltd | Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to bot...view more Surkopak® 2135, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It is soft, very flexible and has excellent solvent release properties. view less | |
| Novalkyd S1023-50S100 | Novaresine S.r.l | Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose...view more Novalkyd S1023-50S100 is a short oil, non-drying alkyd that has a high color retention, making it ideal for all kinds of white, non-yellowing enamels. It is recommended in baking enamels for metal furniture, household appliances and general industrial finishes. When combined with nitrocellulose, it provides high gloss and non-yellowing features. view less | |
| Polurgreen ES.M | S.A.P.I.C.I. SpA | Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with high...view more Polurgreen ES.M is an isocyanurate. This product dries quickly with good pot life and yellowing resistance. It can be used in polyurethane topcoats with high solids content. Polurgreen ES.M's high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Resiflow® LG-99 | Estron Chemical, Inc. | Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® LG-99 is a non-silicone, flow, leveling and wetting additive for UV and solvent-based inks and coatings. Typical dosage is 0.1-3.0% based on total formula. Resiflow® LG-99 can also be used in UV free radical, cationic cure systems, solvent-based acrylics, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Sintopol DP 50/100% | Sintochem s.r.l. | Sintopol DP 50/100% is garnder in color and is a aromatic polyurethane, not reactive, apt as immigrating polymeric plasticizer for inks. This product is soluble in esthers, ketones alcohols and aromatic solvents, and it has compatibility with the primary DOP, DBP, citrates, nitrocellulose...view more Sintopol DP 50/100% is garnder in color and is a aromatic polyurethane, not reactive, apt as immigrating polymeric plasticizer for inks. This product is soluble in esthers, ketones alcohols and aromatic solvents, and it has compatibility with the primary DOP, DBP, citrates, nitrocellulose and maleic resins. This product is primarily used as a resin for paints and coatings. view less | |
| Surkopak® X | BIP (Oldbury) Ltd | Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both r...view more Surkopak® X, based on ethyl acetate, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It can be used on hard grade surfaces and in reverse and lamination processes. view less | |
| Polurene AD 72 | S.A.P.I.C.I. SpA | Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is highe...view more Polurene AD 72 is a polyurethane adduct with low free TDI content. This product is highly compatible with nitrocellulose, CAB, saturated polyesters, OH acrylic polyols, and vinyl resins. It can be used in 2K varnishes and enamels. This product is higher in hardness and reactivity than a traditional adduct. It contains less than .5% TDI isocyanates. view less | |
| Resiflow® LF | Estron Chemical, Inc. | Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Polurgreen ES.P | S.A.P.I.C.I. SpA | Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linkin...view more Polurgreen ES.P is a mixed isocyanurate. This product has good yellowing resistance and good hardness. It can be used in clear or pigmented polyurethane high gloss topcoats with high solids content. Its high nitrocellulose facilitates good cross-linking with higher hydroxide-content resins. This product contains less than .5% TDI isocyanates and less than .1% HDI isocyanates. view less | |
| Resiflow® L-45D | Estron Chemical, Inc. | Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Novalkyd S1022-60X | Novaresine S.r.l | Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose...view more Novalkyd S1022-60X is a short oil, non-drying alkyd that has a high color retention, making it suitable for all types of white non-yellowing enamels. These would include baked enamels for metal furniture, along with household appliances and industrial finishes. When combined with nitrocellulose, it exhibits non-yellowing features, along with high gloss in flexible lacquers and enamels. view less | |
| Surkopak® 5323 | BIP (Oldbury) Ltd | Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied t...view more Surkopak® 5323, based on ethyl acetate / IP, is a plasticizing polyurethane resin that is intended for nitrocellulose based inks and coating systems. Surkopak® products are available in a choice of hardness and plasticizing effects, which can be applied to both rigid and flexible substrates. It has increased hardness when compared to SP 5255 and can be used in surface, reverse & lamination processes. view less | |
| Resiflow® L5 | Estron Chemical, Inc. | Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Reactol™ 5145 A | Lawter | Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be ...view more Reactol™ 5145 A is an alcohol soluble polyester resin that offers high gloss and solvent release properties. It also exhibits a low viscosity while maintaining good adhesion and flexibility. The product is highly compatible with nitrocellulose and can be an adhesion promoter in hard resin systems. It is used in flexo and gravure alcohol-based inks and in aqueous inks, overprint varnishes and coatings. view less | |
| Resiflow® L-210 | Estron Chemical, Inc. | Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Resiflow® LV | Estron Chemical, Inc. | Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less | |
| Sintopol MD 100/80% E.A. | Sintochem s.r.l. | Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose...view more Sintopol MD 100/80% E.A. is a 80% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/80% E.A. is primarily used in inks, paints and coatings. view less | |
| Sintopol SP 75/80% E.A. | Sintochem s.r.l. | Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flex...view more Sintopol SP 75/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less | |
| Sintopol SP 75 LV/80% E.A. | Sintochem s.r.l. | Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure an...view more Sintopol SP 75 LV/80% E.A. is a urethane resin that has good adhesion on polyolefins and has good plasticizing properties. In combination with film-formers like nitrocellulose, ethyl cellulose, ketone resins. Sintopol SP 75 LV/80% E.A. produces gravure and flexographic inks with good flexibility, gloss and adhesion to treated polyethylene and polypropylene. This product is primarily used as a solvent in paints and coatings to help resistance to weathering. view less | |
| Atresal K2789/55 X SN | Atcoat GmbH | Atresal K2789/55 X SN is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for baking enamels up to 150°C, NC-, 2-K-PUR- coatings, adhesive masses, and SH- coatings. Atcoat alkyd resins are based on natural raw materials l...view more Atresal K2789/55 X SN is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for baking enamels up to 150°C, NC-, 2-K-PUR- coatings, adhesive masses, and SH- coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K2789/55 X SN has an oil length of 29 and a solid of 55%. view less | |
| Atresal K410/75 BA | Atcoat GmbH | Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty aci...view more Atresal K410/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for NC and PUR coatings, baking enamels, and non-yellowing furniture paints. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K410/75 BA has an oil length of 41 a solid of 75%, and a viscosity of 30 to 45 sec. view less | |
| Nebores® A 39-60 X | NECARBO B.V. | Nebores® A 39-60 X is a short oil alkyd resin based on arachide oil consisting of 60% xylene. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-60 X can be used in combination with nitrocellulose in metal an...view more Nebores® A 39-60 X is a short oil alkyd resin based on arachide oil consisting of 60% xylene. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-60 X can be used in combination with nitrocellulose in metal and wood paints for fast drying, elasticity, and hardness, and in combination with U.F. resins in acid curing lacquers for fast drying and through hardening. view less | |
| Nebores® A 39-75 BA | NECARBO B.V. | Nebores® A 39-75 BA is a short oil alkyd resin based on arachide oil and is delivered 75% in butylacetate. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-75 BA can be used in combination with nitrocellulose...view more Nebores® A 39-75 BA is a short oil alkyd resin based on arachide oil and is delivered 75% in butylacetate. This light yellow liquid functions as a non-drying alkyd resin with filling power. Nebores® A 39-75 BA can be used in combination with nitrocellulose in metal and wood paints for fast drying, elasticity, and hardness, and in combination with U.F. resins in acid curing lacquers for fast drying and through hardening. view less | |
| Sintopol MD 100/100% | Sintochem s.r.l. | Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This lasticizing resin is in nitrocellulose...view more Sintopol MD 100/100% is a gardner color 2 max urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This lasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 100/100% is primarily used in inks, paints and coatings. view less | |
| Atresal M41/60 X | Atcoat GmbH | Atresal M41/60 X is medium oil alkyd resins, consisting of fatty acid, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw mater...view more Atresal M41/60 X is medium oil alkyd resins, consisting of fatty acid, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M41/60 X has an oil length of 41, a solid of 60%, and a viscosity of 65 to 85 sec. view less | |
| Atresal M41/75 BA | Atcoat GmbH | Atresal M41/75 BA is medium oil alkyd resins, consisting of fatty acid and butylacetat, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on ...view more Atresal M41/75 BA is medium oil alkyd resins, consisting of fatty acid and butylacetat, suitable for car repair, NC lacquers, machine, and PUR-coatings with good yellowing resistance, color fastness, and high flexibility. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal M41/75 BA has an oil length of 41, a solid of 75%, and a viscosity of 100 to 130 dPas. view less | |
| Sintopol MD 95/75% E.A. | Sintochem s.r.l. | Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose...view more Sintopol MD 95/75% E.A. is a 75% solution in ethyl acetate of a urethane polymer, not reactive, with an excellent adhesion on the treated polyolefins. This product is slightly more plastic polyurethane than Sintopol MD100. It is gravure and flexographic inks for treated polyethylene and polypropylene. This plasticizing resin is in nitrocellulose based systems with good adhesion and has a low odor with temperature resistance. Sintopol MD 95/75% E.A. is primarily used in inks, paints and coatings. view less | |
| Atresal K29/60 X | Atcoat GmbH | Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on...view more Atresal K29/60 X is short oil alkyd resin, consisting of dehydrated castor oil and xylene, suitable for machine paints, stove drying lacquers and primers, car repair lacquers, highly reactive resin, and NC and AC coatings. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal K29/60 X has an oil length of 29 a solid of 60%, and a viscosity of 65 to 80 sec. view less | |
| Sintopol MD 120/60% E.A. | Sintochem s.r.l. | Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined with nitrocellulose...view more Sintopol MD 120/60% E.A. is a clear yellow-brown color polyurethane resin that is not reactive that is designed to formulate gravure and flexographic inks with adhesive properties on several different packaging substrates. This product can be combined with nitrocellulose film formers in formulating gravure and flexographic inks with good adhesive properties on various films. Sintopol MD 120/60% E.A. is primarily used in inks, paints and coatings and provides resistance to scratches and with a superior heat seal resistance. view less | |
| Novalkyd S1159-70X | Novaresine S.r.l | Novalkyd S1159-70X is a non-drying, short oil alkyd that has high reactivity in a hard and flexible resin that has good mar resistance, through cure and compatibility with hydroxy acrylics. It is especially suitable for the formulation of nitrocellulose c...view more Novalkyd S1159-70X is a non-drying, short oil alkyd that has high reactivity in a hard and flexible resin that has good mar resistance, through cure and compatibility with hydroxy acrylics. It is especially suitable for the formulation of nitrocellulose coatings and enamels for the automotive industry, together with hydroxy acrylics. Novalkyd S1159-70X also has application in PU primers for industrial car body repairs, in high-quality base coats, top coats for wood as well as baking enamels. view less | |
| Resiflow® L-67 | Estron Chemical, Inc. | Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® L-67 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems for elimination of entrapped air and surface imperfections such as pinholes and craters. As a flow control agent, Resiflow® L-67 will improve flow and leveling (orange peel) and can improve the flexibility of coatings. Resiflow® L-67 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems, as the product has compatibility with all coating resins. view less | |
| Resiflow® L | Estron Chemical, Inc. | Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose...view more Resiflow® L is an acrylic polymer used in high solids, UV curing, coil, and other coating application systems. At appropriate concentrations, Resiflow® L will eliminate air entrapment, correct surface imperfections such as pinholes and craters, improve flow and leveling (orange peel), and improve the flexibility of coatings. This can be easily achieved by thoroughly mixing Resiflow® L with the other paint ingredients. Resiflow® L has compatibility with all coating resins and can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less | |
| Atresal SO 32/60 X | Atcoat GmbH | Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowi...view more Atresal SO 32/60 X is short oil alkyd resin, consisting of high quality fatty acid and xylene, suitable for 2K coatings, NC, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquers with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal SO 32/60 X has an oil length of 32 a solid of 60%, and a viscosity of 750 to 1200 mPas (50°C). view less | |
| Sintopol MD 95/100% | Sintochem s.r.l. | Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and polypropylene. It is a plasticizing resin in nitrocellulose...view more Sintopol MD 95/100% is a urethane polymer with an excellent adhesion on the treated polyolefins. Sintopol MD 95/100% is a little more plastic polyurethane than Sintopol MD 100. This product is Gravure and flexographic inks for treated polyethylene and polypropylene. It is a plasticizing resin in nitrocellulose based systems with good adhesion, low odor and good temperature resistance. Usually the use in the formula of polypropylene micro-crystalline waxes is suggested. Sintopol MD 95/100% is primarily used as an additive in inks, paints and coatings. view less | |
| Surkofilm® 1137 | BIP (Oldbury) Ltd | Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose...view more Surkofilm® 1137 is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. Primarily used in the production of lamination inks, mono-component or in combination with nitrocellulose as well as vinyl resins. view less | |
| Atresal C 32/75 BA | Atcoat GmbH | Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer wit...view more Atresal C 32/75 BA is short oil alkyd resin, consisting of high quality fatty acid and butylacetat, suitable for 2K coatings, NC coatings, enamels, and is especially recommended for the formulation of fast drying primer, single coat paints and lacquer with low yellowing. Atcoat alkyd resins are based on natural raw materials like fatty acids, plant, and animal. Atresal C 32/75 BA has an oil length of 32 a solid of 75%, and a viscosity of 20 to 35 s (50% DIN4). view less | |
| Surkofilm® 653H | BIP (Oldbury) Ltd | Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose...view more Surkofilm® 653H is a polymer that contains both polyether and polyester aliphatic and some aromatic high molecular weight structures. The product comprises a range of solvent based film forming urethanes which are used on a wide variety of substrates where demanding performance calls for high quality inks. Surkofilm® polymers have been formulated to low non volatile content with special grades for vinyl substrates in combination with vinyl co-polymers. it can be used in flexographic or gravure lamination and surface printing. as well as in combination with nitrocellulose or vinyl resin for the production of retortable inks. view less |
