| APACA | PCI Group, Inc. | APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gl...view more APACA is a clear, non-ionic modified dimethyl polysiloxane co-polymer solution for use in water-borne and water-reducible products. It will assist in the reduction of surface defects by altering the surface tension of the coating. It will also increase gloss, slip and mar resistance. view less | |
| BLISTER FREE 56 | Bernd Schwegmann GmbH & Co. KG | BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering ...view more BLISTER FREE 56 is a defoamer and deaerator for water-based coating systems. This clear yellow liquid is silicone free. It is an interfacially active product, which suppresses the inclusion of air and destroys air bubbles before the film dries. Cratering is thereby prevented. The film elasticity is improved. BLISTER FREE 56 is suitable in most water-based systems and acts as defoamer, deaerator and to some extend as levelling additive. This product is especially recommended in the following systems: alkyd / acrylic paints, saturated polyesters, epoxydes, and UV coating systems. view less | |
| BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...view more BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. view less | |
| BYK®-313 | BYK | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...view more BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. view less | |
| BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....view more BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. view less | |
| BYK®-354 | BYK | BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tens...view more BYK®-354 is a solution of a polyacrylate. These additives improve leveling and gloss. They produce a long wave effect and avoid cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. These additives are thermally stable. Due to its high molecular weight and its unpolar structure, BYK-354 has both leveling and air release properties. view less | |
| BYK®-3550 | BYK | BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Dependi...view more BYK®-3550 is a patented technology of a surface-active additive based on a silicone acrylate copolymer. It leads to a strong reduction of the surface tension of the paint system. Therefore, it improves the substrate wetting and prevents cratering. Depending on the polarity of the system, BYK®-3550 shows different properties. In polar systems the additive shows an excellent compatibility in the coating, which leads to a homogeneous distribution in the film. view less | |
| BYK®-356 | BYK | BYK®-356 is an acrylic leveling additive for solvent-borne and solvent-free systems. This polyacrylate is the solvent-free version of BYK-355. | |
| BYK®-356 For Powder | BYK | BYK®-356 For Powder anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is the solvent-free version of BYK-355. | |
| BYK®-358 N | BYK | BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and doe...view more BYK®-358 N is a solution of a polyacrylate that can be used as an anti-cratering and leveling additive in all solvent-borne coatings. It increases gloss and gives the coatings a long wave effect. It only causes a minor reduction in surface tension and does not negatively influence the recoatability and intercoat adhesion. This product is suited for high quality pigmented and non-pigmented industrial coatings. BYK®-358 N does not cause turbidity in clear coats or haze in pigmented systems. This additive is thermally stable. view less | |
| BYK®-359 | BYK | BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slig...view more BYK®-359 is a polyacrylate additive that improves leveling and gloss. It produces a long wave effect and avoids cratering in the system. These acrylate additives do not negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced, and these additives are thermally stable. BYK-359 is mainly used as a leveling and anti-cratering additive in industrial coatings and coil coatings. Additionally it acts as a defoaming and air release agent. view less | |
| BYK®-359 For Powder | BYK | BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This pr...view more BYK®-359 For Powder is anti-crater and leveling additive for the formulation of resin masterbatches for powder coatings. It is a polyacrylate that is used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent anti-cratering along with optimum leveling. Fisheyes and pinholes are prevented to produce the best DOI (distinction of image) in the powder coating film. BYK-359 ensures quick and easy incorporation into the binder due to its good compatibility and low product viscosity. view less | |
| BYK®-360 P | BYK | BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additio...view more BYK®-360 P is a polyacrylate, adsorbed on silicon dioxide. It is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-360 P improves leveling of powder coating systems and prevents "orange peel". Additionally, BYK-360 P prevents surface defects specific to powder coatings such as craters, pinholes and fisheyes. view less | |
| BYK®-361 N For Powder | BYK | BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency wi...view more BYK®-361 N For Powder is a polyacrylate used to produce a resin masterbatch for powder coatings, especially for clear powder coatings. This product exhibits excellent compatibility with all powder coating resins. BYK-361 N provides maximum transparency with excellent leveling and outstanding performance in long termed exterior exposure conditions.Low viscosity facilitates the ease of incorporation of BYK-361 N. BYK-361 N is also suitable for pigmented systems. view less | |
| BYK®-364 P | BYK | BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) an...view more BYK®-364 P is a polyacrylate, adsorbed on silicon dioxide. This product has a polar structure and therefore pigment wetting is generally improved. BYK-364 P, especially in TGIC-alternative powder coating systems, will improve DOI (distinction of image) and reduce pinholes at the surface of the coating. BYK-364 P also improves leveling of powder coatings systems and prevents "orange peel“. Additionally, BYK-364 P prevents other surface defects specific to powder coating such as craters and fisheyes. BYK-364 P is an OH-functional additive which can be crosslinked with a suitable binder into the coating system. view less | |
| BYK®-366 P | BYK | BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. ...view more BYK®-366 P is a standard anti-crater and leveling additive for pigmented powder coatings. It is polyacrylate, adsorbed on silicon dioxide. This product is effective in powder coatings based on epoxy, polyester/epoxy, polyester, polyurethane and acrylics. BYK-366 P very effectively prevents craters and improves leveling. Additionally pinholes, fisheyes and "orange-peel“ are reduced. view less | |
| BYK®-381 | BYK | BYK®-381 is a leveling additive for aqueous systems. It is a solution of a polyacrylate, ionic. This product is an acrylic leveling additive which improves only leveling and has no effect on surface tension. | |
| Dynoadd® F-1 | Dynoadd by Dynea | Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are ...view more Dynoadd® F-1 is a polymeric, non-silicone general-purpose flow and anti-crater additive for solvent-borne coatings. It lowers surface tension in coating formulations, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-1 has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-1 is an excellent choice in multiple-layer coatings. Dynoadd® F-1 has applications in industrial coatings, coil coatings, automotive OEM, printing inks, and woods coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-100 | Dynoadd by Dynea | Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with b...view more Dynoadd® F-100 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-100 is more compatible with backbone resins than Dynoadd® F-1 and gives improved performance in more polar systems. Dynoadd® F-100 has applications in coil coatings, can coatings, automotive OEM, and printing inks. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-1. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-101 | Dynoadd by Dynea | Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dyno...view more Dynoadd® F-101 is a polymeric, non-silicone flow and levelling agent. It reduces the surface tension in non-solvent and solvent based coating systems, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-101 is more polar than Dynoadd® F-100. Dynoadd® F-101 gives improved protection against surface defects in radcure formulations. The higher polarity contributes to good pigment wetting and improved adhesion in some systems. Dynoadd® F-101 has application in coil coatings, automotive OEM, printing ink, and radcure coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, Dynoadd® F-101 is seen to have an extra advantage in polar lacquer systems due to its polar properties. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-102 | Dynoadd by Dynea | Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulati...view more Dynoadd® F-102 is a non-silicone, acrylic modified polyester designed for solvent based formulations. Due to its molecular weight and chemical composition, Dynoadd® F-102 provides a good balance of flow and antifoam properties in a wide range of formulations. Addition of Dynoadd® F-102 will have a positive contribution to substrate wetting. Dynoadd® F-102 can be used in combination with other Dynoadd® products such as Dynoadd® F-1. Dynoadd® F-102 has applications in coil coatings and general industrial. The additive has limited compatibility in many lacquer systems, thus contributing to good defoaming as well as leveling. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-300 | Dynoadd by Dynea | Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with b...view more Dynoadd® F-300 is a polymeric, non-silicone flow and wetting additive for solvent-borne coatings. It lowers the surface tension in the formulation. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-300 is more compatible with backbone resins than Dynoadd® F-3 and gives improved performance in more polar systems. Dynoadd® F-300 has applications in can coatings and coil coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. However, it is more compatible in polar systems than Dynoadd® F-3. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-3B | Dynoadd by Dynea | Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissi...view more Dynoadd® F-3Bg is Dynoadd® F-3 dissolved in butyl glycol. Dynoadd® F-3Bg is a polymeric, non-silicone flow and anti-crater additive for solvent-borne coatings. It lowers surface tension, thus improves substrate wetting. Surface defects like craters, cissing and pinholes are eliminated. Dynoadd® F-3Bg has limited, but balanced compatibility with most backbone resins, and has defoaming properties in many formulations. Dynoadd® F-3Bg is an excellent choice in multiple-layer coatings, as it does not interfere with inter-coat adhesion. Dynoadd® F-3B has applications in coil coatings and can coatings. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-404 | Dynoadd by Dynea | Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The ad...view more Dynoadd® F-404 is a polyester-based, siloxane modified additive that effectively controls surface tension in solvent based coating systems. Dynoadd® F-404 gives excellent flow, levelling and overspray cratering resistance to spray applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with increasing level of addition. Dynoadd® F-404 has applications in general industry, wood coatings, and automotive OEM/refinish. The additive is compatible with most solvent-borne and non-solvent coating systems independently of lacquer chemistry. view less | Request Sample |
| Dynoadd® F-414 | Dynoadd by Dynea | Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The ad...view more Dynoadd® F-414 is a polyester-modified, siloxane-based additive that effectively controls surface tension in solvent-based coating systems. Dynoadd® F-414 gives excellent flow, leveling, and overspray cratering resistance to spray-applied coatings. The additive significantly improves film appearance at low dosage levels. Enhanced surface slip is gained with an increasing level of addition. view less | Request Sample |
| Dynoadd® F-461 | Dynoadd by Dynea | Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a sig...view more Dynoadd® F-461, developed by Dynea, is an SVHC-free polyether polysiloxane wetting, levelling, and slip additive for water-borne, solvent-borne, and UV formulations. The product reduces surface tension and prevents defects. Dynoadd® F-461 also gives a significant reduction in foam formation and stability in WB applications. Surface slip is improved considerably giving improved scratch and mar resistance. Dynoadd® F-461 is a wetting additive providing an optimal all-around balance of properties and benefits. view less | Request Sample |
| Dynoadd® F-462 | Dynoadd by Dynea | Dynoadd® F-462, developed by Dynea, is a modified polysiloxane wetting and levelling additive for waterborne formulations. Dynoadd® F-462 reduces surface tension, improves substrate wetting, and prevents defects without increasing surface slip. | Request Sample |
| Dynoadd® F-601 | Dynoadd by Dynea | Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfectio...view more Dynoadd® F-601 is non-silicone, acrylic modified polyester for water-borne systems. Addition of Dynoadd® F-601 improves substrate wetting and flow and leveling. Dynoadd® F-601 solves problems with craters, pinholes, fish eyes and other surface imperfections. Dynoadd® F-601 has applications in industrial coatings, wood coatings, RadCure, and automotive. The additive may be used in most water-borne coating systems independently of lacquer chemistry if the additive is added prior to dilution with water. It may be used in all layers in multi-layered systems. view less | Request Sample |
| Dynoadd® F-606 | Dynoadd by Dynea | Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to impr...view more Dynoadd® F-606 is a non-ionic, silicone-free wetting agent with defoaming properties. Dynoadd® F-606 provides wetting and defoaming in water-based wood adhesives, inks, and coating formulations. The wetting properties of Dynoadd® F-606 extend also to improve pigment wetting. view less | Request Sample |
| Dynoadd® F-608 | Dynoadd by Dynea | Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imper...view more Dynoadd® F-608 is a non-silicone, acrylic-modified polyester for water-borne systems. The addition of Dynoadd® F-608 improves substrate wetting and flow and leveling. Dynoadd® F-608 solves problems with craters, pinholes, fisheyes, and other surface imperfections. The excellent compatibility of the additive with a wide range of resins gives good film clarity in clear coats. Dynoadd® F-608 is compatible with acrylic dispersions, polyurethane dispersions (PUDs), alkyd emulsions, water-reducible alkyds, and polyesters. view less | Request Sample |
| Efka® 3236 | BASF Formulation Additives | Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptan...view more Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. Efka® 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. view less | |
| Efka® 3277 | BASF Formulation Additives | Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polye...view more Efka® 3277 is a fluorocarbon-modified polymer that improves leveling and prevents cratering. It also helps substrate wetting and acts as a defoamer and de-aeration aid. Efka® 3277 is particularly suited for: baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy compounds, and air-drying alkyd systems. view less | |
| Efka® 3570 | BASF Formulation Additives | Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion...view more Efka® 3570 is a fluorcarbon modified polyacrylate neutralized with DMEA and dissolved in water. The use of Efka® 3570 gives the following advantages: excellent anti-cratering behavior, better substrate wetting, improved leveling, and no intercoat adhesion problems. This slightly hazy, yellowish liquid is recommended for use in all kinds of water-based coatings with a pH value > 7.6. view less | |
| Efka® 3600 N | BASF Formulation Additives | Efka® 3600 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has a physical form of a slightly yellowish liquid. Efka® 3600 N is especially suitable fo...view more Efka® 3600 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has a physical form of a slightly yellowish liquid. Efka® 3600 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. view less | |
| Efka® 3650 N | BASF Formulation Additives | Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable fo...view more Efka® 3650 N reduces the surface tension of organic coating systems. This and good compatibility make it a very effective anti-cratering and flow control agent. It has the physical form of lightly yellowish liquid. Efka® 3650 N is especially suitable for baking enamels based on alkyd, acrylic or polyester resins, polyurethane coatings, two-pack epoxy coatings, and air-drying alkyd systems. view less | |
| Efka® 3772 N | BASF Formulation Additives | Efka® 3772 N is a slip and leveling agent for use in aqueous coating systems. It needs to be neutral-ized with ammonia or triethanolamine. Complete water solubility is achieved with 9% triethanolamine or 12% of a 25% ammonia solution. It improves levelin...view more Efka® 3772 N is a slip and leveling agent for use in aqueous coating systems. It needs to be neutral-ized with ammonia or triethanolamine. Complete water solubility is achieved with 9% triethanolamine or 12% of a 25% ammonia solution. It improves leveling, prevents cratering and orange peel, helps substrate wetting, acts as a defoamer, and improves adhesion. Efka® 3772 N has a physical form of clear, colorless liquid. It can be used in water-based air-drying and baking enamels as well as in solvent-based industrial paints. view less | |
| Efka® 3777 N | BASF Formulation Additives | Efka® 3777 N is a fluorocarbon-modified polymer used as a slip and leveling agent. It improves leveling, prevents cratering, helps substrate wetting acts as a defoamer and de-aeration aid, and does not interfere with intercoat adhesion. | |
| HSADA-44 | PCI Group, Inc. | HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange...view more HSADA-44 is a clear, fluoroaliphatic polymeric ester used in solvent, high solids and aqueous coating systems. It is non-ionic and works to reduce or eliminate problems associated with surface tension such as craters, fish-eyes, picture framing and orange peel. HSADA-44 is active throughout the curing process and demonstrates significantly less foam development than other fluorosurfactants. view less | |
| SCHUTZENWET- 84 | SCHÜTZEN Chemical Group | SCHUTZENWET- 84 is a wetting and anti-crater agent used in paints and coatings industry. It can be specifically used for PTFE (Polytetrafluoroethylene) wetting. | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...view more SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. view less | |
| SCHWEGO® Foam 6375 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic...view more SCHWEGO® Foam 6375 is a defoamer for water-based and solvent borne coating systems. This clear yellow liquid is silicone-free and shows good defoaming action in conventional, NC-systems and NC-combinations, AC- and epoxy-systems, PU and air drying acrylic systems. SCHWEGO® foam 6375 is a product with interfacial activity which suppresses the formation of entrapped air in coatings and printing inks, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. view less | |
| SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contain...view more SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contains a very compatible siloxane avoiding cratering, and in many coating systems it has a favourable influence on flow. SCHWEGO® foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives. view less | |
| Siltech® C-7014 | Siltech Corp. | Siltech® C-7014 is a 100% active silicone hydride fluid that is primarily used to eliminate cratering. Siltech® C-7014 is used in solvent based coatings and inks formulations to eliminate cratering, reduce orange peel and eliminate fisheyes. It also preve...view more Siltech® C-7014 is a 100% active silicone hydride fluid that is primarily used to eliminate cratering. Siltech® C-7014 is used in solvent based coatings and inks formulations to eliminate cratering, reduce orange peel and eliminate fisheyes. It also prevents pigment floating and provides mar resistance. view less | |
| TEGO® Glide 466 | Evonik Operations GmbH, BL Coating Additives | TEGO® Glide 466 shows an excellent anti-crater effect on contaminated substrates. It is very effective and can be used in a broad range of different coatings | Request Sample |
| TEGO® Twin 4200 | Evonik Operations GmbH, BL Coating Additives | TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This prod...view more TEGO® Twin 4200 is a universal substrate wetting additive for waterborne wood coatings, industrial coatings and printing inks, which can also be used in solventborne and UV coatings. It provides outstanding wetting and anti-cratering properties. This product also offers enhanced reduction of surface tension and high compatibility. view less | Request Sample |
| WorléeAdd 100 | Worlée-Chemie G.m.b.H. | WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,...view more WorléeAdd 100 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in coating and printing ink formulations. Craters, pinholes and fisheyes may be eliminated or substantially reduced by incorporating 0,3 - 1 % of the agent in the formulation. W´Add 100 is stable to UV radiation and since it is silicone-free, the initial and recoating adhesion is normally not effected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, alkyd, urethane and other systems. view less | |
| WorléeAdd 101 | Worlée-Chemie G.m.b.H. | WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemic...view more WorléeAdd 101 is a polymeric flow control agent and resin modifier used as an additive to correct surface imperfections in powder coating formulations. By addition of W´Add 101 the initial and intercoat adhesion normally is not affected. The unique chemical structure of this product renders it suitable for epoxy, polyester, acrylic, vinyl, urethane resins and other systems. With higher additions W´Add 101 works as a plasticizer. view less | |
| WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...view more WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. view less | |
| WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...view more WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. view less | |
| WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...view more WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. view less | |
| WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...view more WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. view less | |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...view more WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). view less | |
| WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...view more WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. view less | |
| WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...view more WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. view less | |
| WorléeAdd 902 | Worlée-Chemie G.m.b.H. | WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and e...view more WorléeAdd 902 is used as a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. W´Add 902 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. W´Add 902 is provided as a free flowing powder which is convenient in handling easy to disperse and reliable in performance. view less | |
| WorléeAdd 904 | Worlée-Chemie G.m.b.H. | WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and elimi...view more WorléeAdd 904 is a benzoin replacement for degassing and deairing of epoxy, polyester, hybrid, acrylic, and other powder coating systems. WorléeAdd 904 also reduces the melt viscosity, improves the dispersion of pigments and the flow properties, and eliminates pinholes. This product is provided as a granulate which is convenient in handling and easy to disperse. view less | |
| WorléeAdd 915 | Worlée-Chemie G.m.b.H. | WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add...view more WorléeAdd 915 is a powder coating additive capable of improving mechanical properties of powder coatings and their surface appearance. It can be formulated into powder coating compositions primarily based on acrylics and polyester / GMA 300 hybrids. W´Add 915 is a free flowing powder which is convenient in handling, easy to disperse and reliable in performance. view less | |
| XOANONS® WE-D557 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and...view more XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. view less |
