| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| AQUACER® 539 | BYK | AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti b...view more AQUACER® 539 is a non-ionic emulsion based on a modified paraffin wax. This product is suitable for aqueous systems for furniture- and parquet, industrial- and decorative paints. It improves the following surface properties: slip, water repellency, anti blocking, scratch resistance, rub resistance and soft feel effect. view less | |
| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...view more AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. view less | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies b.v.b.a. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| Aspanger Mica 900 | Aspanger | Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves ma...view more Aspanger Mica 900, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica 900 improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica 900 has a loose bulk density (g/l) of 350. view less | |
| Aspanger Mica F | Aspanger | Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F impro...view more Aspanger Mica F, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica F improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica F has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 34, and a loose bulk density (g/l) of 440. view less | |
| Aspanger Mica G | Aspanger | Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G impro...view more Aspanger Mica G, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica G improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica G has a spec. surface (m²/g) of 8, an a oil absorption (g/100 g) of 28, and a loose bulk density (g/l) of 490. view less | |
| Aspanger Mica N | Aspanger | Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N impro...view more Aspanger Mica N, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica N improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica N has a spec. surface (m²/g) of 10, an a oil absorption (g/100 g) of 31, and a loose bulk density (g/l) of 460. view less | |
| Aspanger Mica SFG20 | Aspanger | Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG2...view more Aspanger Mica SFG20 a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG20 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG20 has a Spec. surface (m²/g) of 12, an a oil absorption (g/100 g) of 41, and a loose bulk density (g/l) of 370. view less | |
| Aspanger Mica SFG40 | Aspanger | Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...view more Aspanger Mica SFG40, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG40 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG40 has a spec. surface (m²/g) of 17, an a oil absorption (g/100 g) of 42, and a loose bulk density (g/l) of 290. view less | |
| Aspanger Mica SFG70 | Aspanger | Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG...view more Aspanger Mica SFG70, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SFG70 improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SFG70 has a spec. surface (m²/g) of 21, an a oil absorption (g/100 g) of 43, and a loose bulk density (g/l) of 200. view less | |
| Aspanger Mica SG | Aspanger | Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG imp...view more Aspanger Mica SG, a white muscovite from Aspanger's Austrian resources, has a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and high whiteness. Aspanger Mica SG improves material properties significantly in paints and varnish applications with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, and more. Main applications are for all water based systems, e.g. building paints and emulsions, renders, as well as anti-corrosion high-build coatings, industrial paints, and road-markings. Aspanger Mica SG has a spec. surface (m²/g) of 7, an a oil absorption (g/100 g) of 25, and a loose bulk density (g/l) of 500. view less | |
| Aspanger Mica TF | Aspanger | Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves mate...view more Aspanger Mica TF, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TF improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TF has a Spec. surface (m²/g) of 9.5, an a oil absorption (g/100 g) of 52, and a loose bulk density (g/l) of 370. view less | |
| Aspanger Mica TG | Aspanger | Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves mate...view more Aspanger Mica TG, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TG improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TG has a spec. surface (m²/g) of 4.0, an a oil absorption (g/100 g) of 46, and a loose bulk density (g/l) of 350. view less | |
| Aspanger Mica TM | Aspanger | Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves mate...view more Aspanger Mica TM, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TM improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TM has a spec. surface (m²/g) of 5.5, an a oil absorption (g/100 g) of 37, and a loose bulk density (g/l) of 360. view less | |
| Aspanger Mica TX | Aspanger | Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves mate...view more Aspanger Mica TX, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TX improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TX has a spec. surface (m²/g) of 1.2 and a loose bulk density (g/l) of 320. view less | |
| Aspanger Mica TXL | Aspanger | Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves ma...view more Aspanger Mica TXL, from the T-series, is dry ground muscovite-type of a high aspect ratio and purity with a extremely low heavy metals content. It also has an excellent elasticity with good wetting properties and brightness. Aspanger Mica TXL improves material properties significantly in the application with improved adhesion, reduced permeability, reduced cracking and shrinkage, increased abrasion resistance, weathering resistance, increased flexural modulus and strength, and more. Main applications are in anti-corrosion high-build coatings and refactory coatings, building paints, renders, as well as industrial paints, thermoplastics polymers, thermosets, emulsions, and elastomers. Aspanger Mica TXL has a spec. surface (m²/g) of 3.3 and a loose bulk density (g/l) of 330. view less | |
| AW-858 | Quaker Color (a Division of McAdoo & Allen, Inc.) | AW-858, in the form of a liquid, 8 is a high molecular weight water based silicon feel modifier for leather. It is used in leather topcoats to enhance surface feel properties and improve abrasion resistance properties. | |
| BYK-UV 3518 | BYK | BYK-UV 3518 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| BYK-UV 3519 | BYK | BYK-UV 3519 is a nano-particle dispersion based on surface-treated silica for improving the scratch and abrasion resistance of solvent-free and solvent-borne radiation-curable clear coats. | |
| CAB-O-SPERSE® 1030K | Cabot Corporation - Additives | CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...view more CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. view less | |
| CERAFLOUR® 917 | BYK | CERAFLOUR® 917 is a temperature stable wax additive with excellent shear stability for solvent-borne and aqueous coating systems. This additive makes it possible to achieve homogeneous and even surface textures. It is characterized by a high shear stabil...view more CERAFLOUR® 917 is a temperature stable wax additive with excellent shear stability for solvent-borne and aqueous coating systems. This additive makes it possible to achieve homogeneous and even surface textures. It is characterized by a high shear stability and is also suitable for roller applications, which reach very high shear forces during application. As a result of the high melt viscosity of the wax, the wax particles do not change shape, even at high baking temperatures. In spray coatings, a soft touch effect can be achieved. The wax increases the scratch and abrasion resistance of coatings. view less | |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...view more CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. view less | |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies b.v.b.a. | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...view more CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. view less | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies b.v.b.a. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| Coadis™ 3412 | Arkema Rheology & Specialty Additives | Coadis™ 3412 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| Coadis™ BR 40 | Arkema Rheology & Specialty Additives | Coadis™ BR 40 is an acrylic copolymer dispersing agent particularly suitable for water or glycol based titanium dioxide and iron oxides dispersions. | Request Sample |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | CoatOSil* 3509 coatings additive is a reactive 100% active slip agent that may help improve abrasion and mar resistance in UV and E Beam cured acrylate resins. Additional benefits include enhanced flow and leveling, substrate wetting and gloss retention. | |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...view more CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. view less | Request Sample |
| CRAYVALLAC® WN-1442 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1442 is an additive for use in liquid coatings to enhance surface properties such as scratch and abrasion resistance. Its fine particle size distribution is providing enhanced performance and ease of incorporation | Request Sample |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...view more CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. view less | Request Sample |
| CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...view more CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. view less | Request Sample |
| CRAYVALLAC® WN-2950 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...view more CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. view less | Request Sample |
| CRAYVALLAC® WN-3025 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties w...view more CRAYVALLAC® WN-2950 is a very fine micronized polyethylene wax providing specific mechanical and chemical resistance and used in printing inks, and other demanding applications. CRAYVALLAC® WN-2950 imparts superior rub/mar resistance and slip properties with minimum effect on gloss. It is a high melting point wax with high hardness, heat and solvent resistance. CRAYVALLAC® WN-2950 is particularly suited to “stir in” applications. view less | Request Sample |
| CRAYVALLAC® WS-4700 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provide...view more CRAYVALLAC® WS-4700 is a 40% active dispersion of polyethylene wax in isopropanol. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WS-4700 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. view less | Request Sample |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...view more CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. view less | Request Sample |
| CRAYVALLAC® WW-9500 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provid...view more CRAYVALLAC® WW-9500 is a 35% active dispersion of modified polypropylene wax in water.The low viscosity and high active content of this dispersion together with freedom from dust assist the efficiency of manufacturing processes. CRAYVALLAC® WW-9500 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. It also retards the settlement of pigments and assists in their redispersion. view less | Request Sample |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| Deuteron MM 823 | Deuteron | Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Deuteron M...view more Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. view less | Request Sample |
| Deuteron OG 330 | Deuteron | Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effec...view more Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness. It is ideal for use in water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. view less | Request Sample |
| Deuteron SF 505 | Deuteron | Deuteron SF 505 increases the smoothness and adds a pleasant grip to the surface. The addition of Deuteron SF 505 leads to a significant reduction of the coefficient of friction and highly increased scratch and abrasion resistance. It contains neither wax...view more Deuteron SF 505 increases the smoothness and adds a pleasant grip to the surface. The addition of Deuteron SF 505 leads to a significant reduction of the coefficient of friction and highly increased scratch and abrasion resistance. It contains neither waxes nor silicones. view less | Request Sample |
| DOWSIL™ 23 N Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases...view more DOWSIL™ 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. view less | |
| DOWSIL™ 500W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 500W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 501W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 501W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 502W Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effectiv...view more DOWSIL™ 502W Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| DOWSIL™ 54 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen ...view more DOWSIL™ 54 Additive is a 100% active silicone glycol copolymer. It provides slip, mar resistance and leveling for ink applications. This produces has been successful in solvent-based inkjet inks, solvent-based screen printing inks, and water-based screen printing inks. view less | |
| DOWSIL™ 67 Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective ...view more DOWSIL™ 67 Additive is a low molecular weight organofunctional silicone that gives excellent wetting properties in both waterborne and radiation curable coating formulations. This 100% active, low VOC additive offers formulation flexibility and effective performance at low addition levels. The excellent surface mobility of this additive can be demonstrated by the low surface tensions of aqueous solutions. view less | |
| EBECRYL® 14 | Allnex | EBECRYL® 14 is a trifunctional-high molecular weight diluting oligomer which polymerizes when exposed to sources of free radicals. EBECRYL® 14 is water dispersable and provides high flexibility, chemical and abrasion resistance. EBECRYL® 14 is used in ele...view more EBECRYL® 14 is a trifunctional-high molecular weight diluting oligomer which polymerizes when exposed to sources of free radicals. EBECRYL® 14 is water dispersable and provides high flexibility, chemical and abrasion resistance. EBECRYL® 14 is used in electronics, coatings and inks. It is free from labeling in skin sensitization or otherwise. view less | Request Sample |
| EBECRYL® 8810 | Allnex | EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...view more EBECRYL® 8810 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8810.) EBECRYL® 8810 is a high viscosity liquid at room temperature and is light in color. Films of EBECRYL® 8810 cured by ultraviolet light (UV) or electron beam (EB) exhibit excellent abrasion resistance, toughness and flexibility, and are resistant to yellowing. view less | Request Sample |
| EBECRYL® 8811 | Allnex | EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw ma...view more EBECRYL® 8811 is a difunctional aliphatic urethane acrylate that does not contain any intentionally added organic tin compounds, heavy metals*, hydroquinone (HQ) or methyl ether of hydroquinone (MEHQ). (Please note that quinones are present in many raw materials, so the overall quinone content is reduced, but not zero in EBECRYL® 8811.) EBECRYL® 8811 exhibits rapid surface cure response in both low and high energy cure systems. It is especially recommended for use in UV LED and UVA curing in order to obtain good surface cure. Films of EBECRYL® 8811 cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness, abrasion resistance, and are resistant to yellowing. view less | Request Sample |
| Efka® 3030 | BASF Formulation Additives | Efka® 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxa...view more Efka® 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. view less | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 421 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 421 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. FluoroSLIP® 511 is recommended for powder coatings in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 515 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 515 is a PTFE (polytetrafluoroethylene) and synthetic wax blend. | |
| FluoroSLIP® 533 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 533 is a PTFE and hydrophilic synthetic wax blend where the synthetic wax shows a uniform melting range peaking at 97°C. | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 605 is a spherical synthetic wax and PTFE blend. | |
| FluoroSLIP® 731MG (PTFE / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting synthetic wax, and carnauba wax blend. This wax blend shows a melting peaks ranging from 84 – 110°C. | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 357 is a spherical synthetic wax in a non-ionic aqueous dispersion recommended for water based coating systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies b.v.b.a. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion. Hydrocer ER-77 is used in both air dry and baked coatings. | |
| KAFU-308 | Keeneyes International Co., Ltd. | KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...view more KAFU-308 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. view less | |
| KAFU-508 | Keeneyes International Co., Ltd. | KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characterist...view more KAFU-508 is a PTFE wax, highly fragmented with the unique use of advanced powder molding process combined with modern nanotechnology. Compared with traditional grinding mill products, it can help achieve anti-rub, abrasion resistance and slip characteristics in inks and coatings applications. view less | |
| Michem® Emulsion 12235 | Michelman | Michem® Emulsion 12235 provides abrasion resistance in coatings and varnishes. It also improves release properties in metal stamping applications. | |
| Michem® Emulsion 93935A | Michelman | Michem® Emulsion 93935A is an APEO-free emulsion which improves slip, rub resistance, hardness and block resistance in water bead coatings. Michem® Emulsion 93935A also improves buffability and mar resistance in floor and other polishes. | |
| Michem® Guard 1350A | Michelman | Michem® Guard 1350A is a water-based dispersion which improves rub and abrasion resistance in pigmented coatings and semi-gloss coatings, inks and OPVs at very low addition rates. Addition of Michem® Guard 1350A has little effect on gloss. | |
| mju:wax® 2594 | Ceronas GmbH & Co., KG | mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or w...view more mju:wax® 2594 is a micronised wax additive in the form of a white powder. This product has excellent matting properties combined with good transparency and silky touch. It can provide good scratch and abrasion resistance, and is often used in solvent or water based systems and in wood coatings, printing inks, and lacquers. view less | |
| mju:wax® 9524 | Ceronas GmbH & Co., KG | mju:wax® 9524 is a micronised wax additive in the form of an off-white powder. This product can provide very good scratch and abrasion resistance, and is used as an additive in printing inks, wood coatings, and lacquers. | |
| MONORAL® 619 | HS CHEM CO.,LTD | MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ...view more MONORAL® 619 is a low molecular weight polyethylene dispersed in toluene to impart abrasion resistance to the surface finish and provide mar resistance and slip enhancing properties for both plastic and wood coatings. This product is also used in gravure ink and urethane paint applications. view less | |
| MONORAL® 725 | HS CHEM CO.,LTD | MONORAL® 725 is a dispersion of low molecular weight polyethylene in toluene designed to impart abrasion and mar resistance and slip enhancing properties to the surface finish. This product is often used in gravure ink applications. | |
| MOR-SHINE™ ULTRA CSG | Synthomer | MOR-SHINE™ ULTRA CSG is a concentrated surface protectant for use on polished or decorative concrete surfaces. MOR-SHINE™ ULTRA CSG penetrates into functional concrete surfaces and provides excellent durability and protection from stains and abrasion. | |
| NANOBYK®-3605 | BYK | NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparen...view more NANOBYK®-3605 is an additive containing nanoparticles for solvent-borne and solvent-free rad-cure systems to improve scratch and abrasion resistance. This product improves the scratch and abrasion resistance without negative impact on gloss and transparency. It also improves chemical resistance. view less | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...view more NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. view less | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| NatureShield® 30 | Michelman | NatureShield® 30 contains 99.5% natural ingredients. This additive imparts good water bead to seed, wood and concrete coatings. | |
| NatureShield® 41 | Michelman | NatureShield® 41 is a natural oil emulsion which imparts water resistance to wood and concrete. It also provides a wet look to stone surfaces. As a penetrating oil emulsion, it highlights the grain of wood substrates. The drying effect of the emulsion pro...view more NatureShield® 41 is a natural oil emulsion which imparts water resistance to wood and concrete. It also provides a wet look to stone surfaces. As a penetrating oil emulsion, it highlights the grain of wood substrates. The drying effect of the emulsion provides a moderate resistance to scratching. view less | |
| Neptune 1-N1 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N1 is a medium MW synthetic wax treated to provide water wettability. Neptune 1-N1 is recommended for use in water based coatings. | |
| Neptune 1-N5 (Synthetic Wax) | Shamrock Technologies b.v.b.a. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based, air dry, and baked coatings. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...view more Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. view less | |
| Nyacol® DP5820 | Nyacol Nano Technology | Nycaol® DP5820, Colloidal Silica in Ethylene Glycol, is an ethylene glycol silica additive with a particle size of 20nm. This product is developed to provide anti-block and abrasion resistance properties to polyester film and tape. | |
| ORTEGOL® AB | Evonik Operations GmbH, BL Comfort & Insulation | ORTEGOL® AB is a silicone-based abrasion reducer; easy to blend into the system. | |
| Petilen G03-5 | Petkim Petrokimya Holding A.S. | Petilen G03-5, in the form of white pellets, is low density polyethylene that is applicable in wire and cable coating and more. It has a density of 0.918 to 0.923 gr /cm3, a melting point of 104 to 115 °C, and is insoluble in water. | |
| Petilen H2-21T | Petkim Petrokimya Holding A.S. | Petilen H2-21T, in the form of white pellets, is low density polyethylene that is applicable in wire and cable coating and more. It has a density of 0.918 to 0.923 gr /cm3, a melting point of 104 to 115 °C, and is insoluble in water. | |
| PLIOLITE® AC80 | Synthomer | PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coati...view more PLIOLITE® AC80, often used in combination with PLIOLITE® AC4 or PLIOLITE® AC5G, forms though abrasion and chemically resistant films that have excellent adhesion, UV resistance and exterior weathering properties. Newtonian resin for exterior masonry coatings, anticarbonation, metal protective and intumescent coatings. view less | |
| ProHere® L 90004 | Michelman | ProHere® L 90004 is a high solids emulsion which imparts lubricity and contributes to short term water resistance in metal coatings. | |
| ProHere® L 90005 | Michelman | ProHere® L 90005 is a nonionic polyethylene emulsion that imparts lubricity, scratch and abrasion resistance to metal coatings without affecting gloss. | |
| ProHere® L 90007 | Michelman | ProHere® L 90007 is an nonionic maleated polypropylene dispersion that imparts scratch and abrasion resistance to metal coatings, as well as anti-slip properties. | |
| ProHere® L 90008 | Michelman | ProHere® L 90008 is a nonionic dispersion of polyethylene wax that imparts abrasion resistance and lubricity, while giving a matting effect to the surface of metal coatings. | |
| ProHere® L 90009 | Michelman | ProHere® L 90009 is a nonionic polyethylene emulsion that imparts abrasion resistance, enhanced lubricity, scratch resistance and torque/tension control to metal coatings. |
