UL Prospector

Success!

Successfully saved your search
312 Results
10 AS Wollastocoat® NYCO Minerals, Inc. 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less
10 ES Wollastocoat® NYCO Minerals, Inc. 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less
2 Ethyl Hexyl Phosphoric Acid Synthron 2 Ethyl Hexyl Phosphoric Acid is supplied as a pale yellow, free-flowing liquid with an alcoholic odour. It is used as a corrosion inhibitor and as a base for antistatic or antiwear agents.
2-Ethylhexanoic Acid Perstorp 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...view more 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. view less
400 Wollastocoat® NYCO Minerals, Inc. 400 Wollastocoat® is a 400 mesh wollastonite that is chemically modified for improved film cohesion, corrosion and resistance to UV degradation in powder. It is an industrial and other high performance coating.
ADDAPT® Anticor™ A3N ADDAPT Chemicals BV ADDAPT® Anticor™ A3N is a proprietary blend of phosphonates and organic silicates. It is used as a water-free aluminum anti-corrosion additive in metal working fluids, coatings, ester based lubricants, and textile fluids.
ADDAPT® Anticor™ A40 ADDAPT Chemicals BV ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegr...view more ADDAPT® Anticor™ A40 is a proprietary blend of polyhydroxy amides. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is completely soluble in water, biodegradable, and is not restricted by the hardness of the water. view less
ADDAPT® Anticor™ A65N ADDAPT Chemicals BV ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pi...view more ADDAPT® Anticor™ A65N is a proprietary blend of organic acids salts and silanes. It is used as a water-soluble multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product controls the amount of pitting on the metal surface, is biodegradable, and is not restricted by the hardness of the water. view less
ADDAPT® Anticor™ A84 ADDAPT Chemicals BV ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restr...view more ADDAPT® Anticor™ A84is a proprietary blend of organic acid salts and silanes. It is used as a multi-metal anti-corrosion additive and helps control the pitting on the metal surface. This product is biodegradable, completely soluble in water, and not restricted by the hardness of the water. It is used in coatings, printing inks, lubricants, textile fluids, and cleaners. view less
ADDAPT® Anticor™ AMC 2330 ADDAPT Chemicals BV ADDAPT® Anticor™ AMC 2330 is a proprietary blend phosphonates and glycol ethers. It is added to coatings as an anti-corrosion additive to protect aluminum and magnesium. This product is low-foaming, controls pitting on the metal surface, and is not restri...view more ADDAPT® Anticor™ AMC 2330 is a proprietary blend phosphonates and glycol ethers. It is added to coatings as an anti-corrosion additive to protect aluminum and magnesium. This product is low-foaming, controls pitting on the metal surface, and is not restricted by the hardness of the water. view less
ADDAPT® Anticor™ C 10N ADDAPT Chemicals BV ADDAPT® Anticor™ C 10N is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product does not contain BTA, TTA, or amine.
ADDAPT® Anticor™ C 6 ADDAPT Chemicals BV ADDAPT® Anticor™ C 6 is a proprietary mixture of modified monophosphate and diphosphate esters. It is used as a metal passivator in lacquers and paints. This product is BTA, TTA, and amine free.
ADDAPT® Anticor™ L 4783 ADDAPT Chemicals BV ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, solub...view more ADDAPT® Anticor™ L 4783 is a proprietary blend of polyhydroxycarbonate and silanes. It is used as a multi-metal anti-corrosion additive in coatings, printing inks, lubricants, textile fluids, and cleaners. This product is non-foaming, biodegradable, soluble in water, and is not restricted by the hardness of water. view less
ADDAPT® Ferrocor™ Flash ADDAPT Chemicals BV ADDAPT® Ferrocor™ Flash is a proprietary blend of phosphate salts and phosphonoxy esters. It is used as a corrosion inhibitor for ferrous and zinc surfaces. This product is water soluble and can be added to emulsion paints, lacquers, and textile fluids.
ADDITOL® XL 6557 Allnex Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...view more Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. view less Request Sample
AEROSIL® R 812 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 812 is a fumed silica after-treated with organosilane (HDMDS) with high specific surface and marked hydrophobia. Request Sample
AEROSIL® R 972 Evonik Operations GmbH, BL Coating Additives AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 h...view more AEROSIL® R 972 is a fumed silica aftertreated with DDS (Dimethyldichlorosilane). It is used in silicone rubber and silicone sealants, paints and coatings, printing inks and toner, cable compounds and gels, adhesives, and plant protection. AEROSIL® R 972 has rheology control of complex liquid systems and is water resistant, hydrophobising of liquid systems. It is used in coatings as an anti-settling agent, for pigment stabilization and improvement of corrosion protection. view less Request Sample
AEROSIL® R 972 V Evonik Operations GmbH, BL Coating Additives AEROSIL® R 972 V is a densified hydrophobic fumed silica, after treated with DDS (Dimethyldichlorosilane). Due to the densification it shows a weaker rheological effect than AEROSIL® R 972. Request Sample
ALCOPHOR® 827 BASF Formulation Additives Highly effective corrosion inhibitor, for waterborne and solvent borne systems.
ALKATERGE®-T ANGUS Chemical Company ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emu...view more ALKATERGE®-T is one of a series of oxazoline-type non-volatile surface active agents, and is only slightly soluble in water. It is an excellent aid for the dispersion of pigments (nonaqueous solvents base) and also indicated as a primary water in oil emulsifier. At ordinary room temperature, ALKATERGE®-T is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones, moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, ALKATERGE®-T is miscible with almost all organic liquids. ALKATERGE®-T is useful as a surface active agent which is indicated by the fact that 0.1% in mineral oil reduces the interfacial surface tension against water approximately 95%, or to less than 2 dynes/cm. view less
AMINE™ CS-1235 LEHVOSS Group AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less
AMINE™ CS-1246 LEHVOSS Group AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less
Amorphic™ A450 Bunge Amorphic Solutions, LLC. Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...view more Amorphic™ A450 is an engineered aluminum phosphate complex designed for general purpose corrosion control. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in interior, exterior, and marine applications. view less
Amorphic™ A950 Bunge Amorphic Solutions, LLC. Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, d...view more Amorphic™ A950 is an engineered aluminum phosphate complex designed to extend the service life of protective coatings in critical service applications in interior, exterior, and marine environments. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is often used in coatings and high performance binder systems. view less
Amorphic™ C120 Bunge Amorphic Solutions, LLC. Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...view more Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less
Amorphic™ I200 Bunge Amorphic Solutions, LLC. Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechan...view more Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less
Amorphic™ I700 Bunge Amorphic Solutions, LLC. Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, a...view more Amorphic™ I700 is a general purpose corrosion inhibitor that maximizes water absorption and minimizes water diffusion through coating films. This product can be used as an alternative to chrome pigments, and is also used in coil coating, automotive OEM, and refinish applications. view less
AMP™ 75 LEHVOSS Group AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less
AMP™ 90 LEHVOSS Group AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less
AMP™ 95 LEHVOSS Group AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to ...view more AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less
AMPARMOR 4010 DKSH The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR...view more The AMPARMOR 4010 series is a uniquely engineered microparticle containing a patented blend of corrosion inhibitors. These microparticles are designed to extend coating durability by releasing inhibitors in response to the onset of corrosion. The AMPARMOR 4010 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less Request Sample
ASCONIUM® 110 ASCOTEC ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats. Request Sample
ASCONIUM® 111 ASCOTEC ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins. Request Sample
ASCONIUM® 112 ASCOTEC ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins. Request Sample
ASCONIUM® 114 ASCOTEC ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. Request Sample
ASCONIUM® 130 ASCOTEC ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins. Request Sample
ASCONIUM® 140 ASCOTEC ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins. Request Sample
ASCONIUM® 141S1 ASCOTEC ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins. Request Sample
ASCONIUM® 142DA ASCOTEC ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. Request Sample
ASCONIUM® 143 ASCOTEC ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. Request Sample
ASCONIUM® 144DA ASCOTEC ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. Request Sample
ASCOTRAN® AL4 ASCOTEC ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the...view more ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRAN® H10 ASCOTEC ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...view more ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRAN® H14 ASCOTEC ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and...view more ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRAN® H17 ASCOTEC ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...view more ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRAN® H18 ASCOTEC ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during dryin...view more ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
New! ASCOTRAN® H30 ASCOTEC ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very se...view more ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRAN® HPB ASCOTEC ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and a...view more ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less Request Sample
ASCOTRUST® X1 ASCOTEC ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. Request Sample
ASCOTRUST® X2 ASCOTEC ASCOTRUST® X2 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne clear coatings to enable the direct application on rust or poorly prepared surfaces. Request Sample
ASCOTRUST® X4 ASCOTEC ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. Request Sample
ATP-1S Keeneyes International Co., Ltd. ATP-1S is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for solvent-based paints.
ATP-1W Keeneyes International Co., Ltd. ATP-1W is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for water-soluble paints.
ATP-PSW Keeneyes International Co., Ltd. ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant ...view more ATP-PSW is pure aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for fire retardant coatings, heat-resistant coatings, and anti-corrosion coatings. view less
ATP-TSW Keeneyes International Co., Ltd. ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-s...view more ATP-TSW is modified aluminum tripolyphosphate. It has excellent anti-corrosive benefits and high efficiency. It also offers good adhesive force, impact resilience, and wide adaptability. This product is recommended for high grade solvent-based and water-soluble paints. view less
AX1 Hexigone Inhibitors Ltd AX1 is part of Hexigone’s intelli-ion anti-corrosive pigment range and is suitable for primer coating systems, which require a chromate-free anti-corrosive pigment within the system. Positive performance has been seen in polyester, polyurethane and acryli...view more AX1 is part of Hexigone’s intelli-ion anti-corrosive pigment range and is suitable for primer coating systems, which require a chromate-free anti-corrosive pigment within the system. Positive performance has been seen in polyester, polyurethane and acrylic systems. AX1 may be suitable for other coatings and corrosion defence uses, however these capabilities have not been tested exhaustively. view less
AX2 Hexigone Inhibitors Ltd AX2 is part of Hexigone’s intelli-ion anti-corrosive pigment range and is suitable for basic primer coating systems, which require a chromate-free anti-corrosive pigment within the system. Positive performance has been seen in amine cured 2K expoxy, polye...view more AX2 is part of Hexigone’s intelli-ion anti-corrosive pigment range and is suitable for basic primer coating systems, which require a chromate-free anti-corrosive pigment within the system. Positive performance has been seen in amine cured 2K expoxy, polyester, polyurethane and acrylic systems. AX2 may be suitable for other coatings and corrosion defence uses, however these capabilities have not been tested exhaustively. view less
Barium Chromate M20 SNCZ Société Nouvelle des Couleurs Zinciques Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is no...view more Barium Chromate M20 (BaCrO4) is a low-dust yellow micronised powder that contains no soluble salts which might have a detrimental effect on the anticorrosive performance. Because of its structure and colour, M20 has a slight tinting strength that is not hygroscopic. It is easily dispersible and has a low oil absorption. This product's lightfastness is excellent and it is perfectly stable up to 600°C. Barium Chromate M20 passivates metals by building up a surface bonded protective metal oxide layer (anodic passivation). It has a wide spectrum of efficiency in terms of metal protection. view less Request Sample
BECKOCURE™ EH 2100w/44WA Allnex BECKOCURE® EH 2100W/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...view more BECKOCURE® EH 2100W/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. view less Request Sample
BECKOCURE™ EH 2240/70MP Allnex BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. Request Sample
BECKOCURE™ EH 2260w/41WA Allnex BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less Request Sample
BECKOCURE™ EH 2261w/41WA Allnex BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...view more BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. view less Request Sample
Benzotriazole ChemCeed Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for ...view more Benzotriazole is a corrosion inhibitor for copper and copper alloys, and is commonly used in water cooling systems. Additional benzotriazole applications include use as a silver polishing agent in dishwasher detergent, automotive antifreeze, antirust for photography, and use as a lubricant additive. view less
Boehmite for Lithium-ion Battery Separator B8014-L4 Tianjin Boyuan New Materials Co., Ltd. B8014-L4 is a boehmite powder with small particle size, high temperature resistance, and low hardness. It can be used as a coating on Lithium-ion battery separators.
BRB Siloen® SR 313 BRB International BV BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints.
BRB Siloen® SR 379 BRB International BV BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints.
BRB Siloen® SR 379N BRB International BV BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...view more BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. view less
BRB Siloen® SR 383 BRB International BV BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints.
C Glass Flake GF007/C Glassflake Ltd C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...view more C Glass Flake GF007/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
C Glass Flake GF750/C Glassflake Ltd C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting i...view more C Glass Flake GF750/C is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/- 2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
C Glass Flake GF750MC Glassflake Ltd C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in...view more C Glass Flake GF750MC is a corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of Av. 5 +/-2 microns. The manufacturing process utilized by this flake differs from the normal spun-glass method, resulting in a wider thickness specification. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
Chlorinated Rubber-YURON CR-40 Yuron New Material YURON CR-40 is a chlorinated rubber supplied in the form of a white powder. It is used as a binder for anti-corrosion coatings and adhesives. This product is also recommended as a combination binder for alkyd resins and adhesive resins.
Chlorinated Rubber-YURON CR-90 Yuron New Material YURON CR-90 is chlorinated rubber, supplied as a white powder that is immiscible in water. It is recommended as a binder for anti-corrosion coatings and adhesives and as a combination binder for alkyd resins and acrylic resins.
Chromic Acid Tianjin Minle Chemical Import & Export Trade Co., Ltd. Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisono...view more Chromic Acid, in the form of a dark purplish red-flake, is a metallic acid. This product can be used in sealing phosphate coatings applied to iron or steel. Its melting point is 197 degrees Celsius, and is soluble in water. This product is both poisonous and corrosive. view less
CoatOSil* FLX Coating Modifier Momentive CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This pro...view more CoatOSil* FLX is a polysiloxane resin modifier for silane/polysiloxane containing coatings, including hybrids. It improves coating flexibility, gloss retention under harsh weathering conditions, and corrosion performance in neutral spray testing. This product is compatible with many organic resin systems and pigments. view less
Crodacor™ OME FE Croda Coatings & Polymers Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other perf...view more Crodacor™ OME FE is a novel additive that combines superior corrosion and flash rust protection for mild steel coatings, simplifying aqueous formulations. It has an excellent environmental profile (no HAPS, no VOC) and has no negative effect on other performance properties. It is ideal for use in a wide variety of coating applications. view less
CV-1142 NuSil Silicone Technology 1 CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...view more CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. view less
CV3-1144-1 NuSil Silicone Technology 1 CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...view more CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. view less
DC Sealing Coating Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...view more DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. view less
Delaphos® 2 Delaphos Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...view more Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. view less
Delaphos® 2M Delaphos Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. view less
Delaphos® 4 Delaphos Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. view less
Dextrol™ OC-180 Ashland Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints.
Dextrol™ OC-6025 Ashland Dextrol™ OC-6025 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties.
Dextrol™ OC-7525 Ashland Dextrol™ OC-7525 is a ammonium hydroxide salt neutralized, APE-free gloss and color acceptance promoter, emulsifier for emulsion polymerization with reduced water sensitivity in dried films, and auxiliary dispersant with anti-corrosion properties.
Diammonium Phosphat Anhydrous Büfa Chemikalien GmbH & Co.KG Diammonium Phosphat Anhydrous is an odorless white powder.
Diammoniumphosphat Wasserfrei Pulver Büfa Chemikalien GmbH & Co.KG Diammoniumphosphat Wasserfrei Pulver (ammoniummonohydrogenorthophosphate, diammoniumacidphosphate, diammonium, Ammonium Hydrogenphosphate) is an odorless white powder.
Diisobutylphosphoric Acid Synthron Diisobutylphosphoric Acid is supplied as a colourless to pale yellow, clear liquid with an alcoholic odour. It is used as a corrosion inhibitor and as a base for antistatic or antiwear agents.
DMAMP-80® ANGUS Chemical Company DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wet...view more DMAMP-80® (80% aqueous solution of 2-dimethylamino-2-methyl-1-propanol) is one of the strongest tertiary amines commercially available. Because it is a strong base, DMAMP-80™ can be used in water systems to provide formulations of exceptional clarity, wettability and stability. This product is recommended for use as an emulsifying agent, corrosion inhibitor, resin solubilizer, catalyst, additive, and synthesis agent. view less
DOWSIL™ 8590 Additive Dow Performance Silicones Paints, Inks and Coatings DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surfa...view more DOWSIL™ 8590 Additive is a self-dispersible, 100 percent active silicone antifoam compound combining good compatibility and good defoaming efficiency, enabling foam control at low temperature in waterborne coatings and inks systems without impacting surface gloss. DOWSIL™ 8590 Additive can be used as sole defoamer for both grind and let down stages. Usage level can be 50 to 70 percent less than conventional defoamers for comparable or better performance. view less
Durazane® 1500 rapid cure Merck Durazane® 1500 rapid cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications.
Durazane® 1500 slow cure Merck Durazane® 1500 slow cure is a liquid low-viscous, solvent-free polysilazane resin to be employed as coating binder. It can be used for scratch resistant coatings as used in automotive interior or exterior applications.
Durazane® 5500 Merck Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried r...view more Durazane® 5500 is a composite material consisting of an amorphous SiO2 core and a polymer cladding material. Since the nano particles are completely incoperated in a polymeric matrix, no nanoscalic dust is produced when the solvent is removed. The dried residue has polymeric characteristics like film building and transparent properties. view less
ECR Glass Flake GF001 Glassflake Ltd ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF001 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF002 Glassflake Ltd ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF002 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.3 - 2.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF003 Glassflake Ltd ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF003 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 2.3 - 3.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF005 Glassflake Ltd ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties ...view more ECR Glass Flake GF005 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 3.5 - 5.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF007 Glassflake Ltd ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties a...view more ECR Glass Flake GF007 is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 5.5 - 9.5μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF100M (Milled) Glassflake Ltd ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier pr...view more ECR Glass Flake GF100M (Milled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less
ECR Glass Flake GF100M (Unmilled) Glassflake Ltd ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier p...view more ECR Glass Flake GF100 (Unmilled) is an extra corrosion resistant glass flake which is manufactured from modified C glass with a nominal thickness of 1.0 - 1.3μm. Primarily used in anti-corrosive coatings, glass flakes can be used to improve both barrier properties and reinforcement of mechanical properties, giving the finished product an isotropic reinforcement across the plane of the platelet. Glassflake materials are offered with the option of surface pre-treatment with a range of saline coupling agents including; 3-Aminopropyltriethoxy Saline, Vinyl trimethoxy Saline, γ-Glycidoxypropyltrimethoxy Saline and Methacryloxypropyltrimethoxy Saline. view less