UL Prospector

Success!

Successfully saved your search
484 Results
Adhesion Promoters 101 Marc Hirsch Adhesion is one of the most important properties of both decorative and protective coatings. Many of the additives used in coating formulations can have a negative impact on the overall adhesion behavior, even for surfaces that would not be considered dif...view more Adhesion is one of the most important properties of both decorative and protective coatings. Many of the additives used in coating formulations can have a negative impact on the overall adhesion behavior, even for surfaces that would not be considered difficult for adhesion. Adhesion promoters (AP) are bi-functional materials that increase adhesive strength between the coating and the substrate and sometimes are referred to as coupling agents. Learn more about adhesion promoters in this article on the Prospector Knowledge Center... view less
Coatings Additives – Defoamers, Adhesion Promoters & UV Protection Marc Hirsch Coatings expert, Marc Hirsch, explains the three additives categories that challenge coatings formulators: defoamers, adhesion promoters & UV protection. These were chosen since their chemistries, applications and mode of activity are very diverse, and ca...view more Coatings expert, Marc Hirsch, explains the three additives categories that challenge coatings formulators: defoamers, adhesion promoters & UV protection. These were chosen since their chemistries, applications and mode of activity are very diverse, and can be some of the more challenging additives to employ in coatings formulation. view less
EBECRYL® 741 Allnex EBECRYL® 741 is an adhesion promoting resin with excellent pigment dispersion properties for radiation curable screen inks. Request Sample
HARDLEN CY2329 DKSH HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN CY2329 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2329 main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. HARDLEN CY2329 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN F-225P DKSH HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefin...view more HARDLEN F-225P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN F-225P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN F225P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EW5250 DKSH HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN CY2321P DKSH HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolef...view more HARDLEN CY2321P is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN CY2321P main characteristics are: ecellent Adhesion Promoter to plastics and various polyolefins without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN CY2321P main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN 13LP DKSH HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or...view more HARDLEN 13LP is a resin grafted with Chlorine (CPO), which has good adhesion power to Polyolefins without any surface treatment. HARDLEN 13LP main characteristics are: excellent Adhesion Promoter to plastics without any surface treatment such as corona or flame. Available to choose Solvent base system (Aromatic or HAPS free). HARDLEN 13LP main applications is adhesive for Polyolefins, Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EH801J DKSH HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EH801J is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EH801J main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EH801J main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EW5515 DKSH HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EW5515 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EW5515 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EW5515 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN EZ2250 DKSH HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins...view more HARDLEN EZ2250 is a resin grafted with Chlorine and Maleic anhydride, which has good adhesion power to Polyolefins or CPO without any surfase treatment. HARDLEN EZ2250 main characteristics are: ecellent Adhesion Promoter to palstic and various polyolefins without any surface treatment such as corona or flame. HARDLEN EZ2250 main applications are: Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN NZ1004 DKSH HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1004 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1004 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1004 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
HARDLEN NZ1015 DKSH HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins ...view more HARDLEN NZ1015 is a chlorine free resin grafted with C Maleic anhydride, which has good adhesion power to Polyolefins or plastics without any surfase treatment. HARDLEN NZ1015 main characteristics are: ecellent Adhesion Promoter to Clorinated Polyolefins without any surface treatment such as corona or flame. HARDLEN NZ1015 main applications are: Vehicles for gravure printing ink, hot-stamping ink and UV ink to Polyolefins. Primer (Pigmented or conductive) to PP-bumper, 1-coat paint to interior car Parts and wheel-cap paint. Binder for flocking. Lamination to PP/Printing-Paper. PP film/ PP film, Foils or Sheet etc. Heat-seal agent to PP Film/Sheet. Available in select countries. Please inquire for more details. view less Request Sample
JEFFAMINE® T-5000 Polyoxypropylenediamine Huntsman Performance Products JEFFAMINE® T-5000 Polyoxypropylenediamine is a trifunctional primary polyetheramine of approximately 5000 molecular weight used as crosslinker for polyurea, co-reactant in epoxy systems where adhesion promotion and flexibility are important.
EBECRYL® 171 Allnex EBECRYL® 171 is a methacrylate modified acidic adhesion promoting agent designed as a modifier for ultraviolet (UV) and electron beam (EB) curable coatings. It is characterized by low viscosity, acid functionality, and adhesion on various substrates. Request Sample
TOYOTAC PMA-L DKSH TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good...view more TOYOTAC PMA-L is a Maleic acid modified Polyolefin. It is grafted with maleic anhydride. It has high content of maleic anhydride. It is an Adhesion Promoter and compatibilizer. It is a powerful CPO and Primer. Totyotac PMA-L main characteristics are: Good Hot Melt adhesion power to Polyolefin, PET,PA, Steel, Metal and EVOH. Good compatibilizer between PP/PA, PP/EPDM, PP/PC etc. Good coupling agent for glass fiber reinforced PP and mineral-filled PP. TOYOTAC PMA-L main aplications are: Hot melt adhesives for Alminium foil and Polyolefin as wrapping materials. Hot Melt Lamination for the multi-layer films such as EVOH/PP, PA/PP. Coupling agent for Polypropylene reinforced with glass-fiber, talc or inorganic-filler. Compatibilizer for Polypropylene combination with wood-fiber. Compatibilizer for the fiber-reinforced plastics. Available in select countries. Please inquire for more details. view less Request Sample
EBECRYL® 767 Allnex EBECRYL® 767 is an acid functionalized acrylic resin diluted with 38% of isobornyl acrylate (IBOA)(1) monomer. This light coloured, moderate viscosity resin is designed as an adhesion promoting additive and it can also be used as a primer or top coat. Request Sample
SILCOLEASE PC-850 Elkem Silicones ​SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE​ polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polye...view more ​SILCOLEASE PC-850 is an adhesion-promoting additive for use with SILCOLEASE​ polyaddition cured solventless and cationic UV/EB cured release coatings. SILCOLEASE PC-850 is designed to significantly improve the anchorage of these release coatings to polyester film. A 1% addition to the formulated bath will produce excellent anchorage even under high humidity conditions. SILCOLEASE PC-850 does not require excessive surface treatment of PET thus providing energy savings nor does SILCOLEASE​ PC-850 slow cure response as compared to other adhesion promoters. For best results, this adhesion promoter ought to be added to the catalyzed silicone release coating as soon as possible before initiating the coating operation. view less
Trixene BI 201 Baxenden Chemicals Ltd. Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, text...view more Trixene BI 201 is an anionic aqua blocked isocyanate dispersion with a viscosity of 300 and is designed for water-based 1 and 2-K systems. Trixene BI 201 can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
CoatOSil* MP 200 Silane Momentive CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and ...view more CoatOSil* MP 200 Silane is an epoxy functional silane oligomer that may be considered for use as an adhesion promoter or binder in polysulfide, urethane, epoxy and acrylic caulks, sealants, adhesives and coatings. It typically aids adhesion promotion and crosslinking of waterborne or solvent based coatings as well as dispersion of metallic pigments in waterborne systems. view less Request Sample
Special-Primer PP 7560 Worlée-Chemie G.m.b.H. Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less
ASKOFEN 779 W 50 ASK Chemicals ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesion...view more ASKOFEN 779 W 50 is a liquid, aqueous resorcinol-formaldehyde resin. ASKOFEN 779 W 50 is used to formulate RFL (Resorcinol–Formaldehyde–Latex) in combination with Latex like SB or preferably with styrene, butadiene, vinylpyridine latex. RFLs are used as adhesion promoters in the rubber industry to increase textile rubber adhesionview less Request Sample
Trixene BI 200 Baxenden Chemicals Ltd. Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and ...view more Trixene BI 200 is an anionic aqua blocked isocyanate dispersion with a viscosity of 100 and is designed for water-based 1 and 2-K systems. They can be used as adhesion promoters and cross-linkers for finishes and coatings on leather, paper, textiles, and more. view less
SiSiB® PC1412 SiSiB SILICONES SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starti...view more SiSiB® PC1412 is a clear to straw liquid. It is a bifunctional organosilane possessing two reactive amino groups and hydrolyzable inorganic methoxysilyl groups. It can be used as a coupling agent, adhesion promoters, surface modifier, etc. or as a starting material in the synthesis of amino-functional silicones. view less
CAB-O-SPERSE® 1030K Cabot Corporation - Additives CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment prope...view more CAB-O-SPERSE® 1030K is an aqueous fumed silica dispersion featuring low viscosity and high solids loading. Performance benefits of this product include good rheological control,anti-blocking, anti-corrosion, adhesion promotion, and surface treatment properties. This product is well suited for use in coatings, adhesives, and metal and optical glass polish applications. view less
Hydro PLIOLITE® 050 Omnova Solutions Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideall...view more Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideally suited for stain blocking primers and paints, multi purpose low VOC primers. view less
EBECRYL® 740/40 TP Allnex EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates. It is recommended for use in: silk screen inks and coatings on plastics, adhesiv...view more EBECRYL® 740/40 TP is an acrylic oligomer diluted with 40% tripropyleneglycol diacrylate (TPGDA). This resin is designed to provide improved adhesion to difficult substrates. It is recommended for use in: silk screen inks and coatings on plastics, adhesives and inks for difficult substrates, such as untreated polyester, polypropylene, polystyrene, and adhesion promoting adhesives. view less Request Sample
Polyester Actylate SP 236 Soltech Ltd Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesi...view more Polyester Actylate SP 236 is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236 is 60% polymer solid by weight with a viscosity of 2,400-2,800 at 25℃. view less
SiSiB® PC1220 SiSiB SILICONES SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to pr...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less
Lumicryl® 1928 Estron Chemical, Inc. Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...view more Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. view less
Polyester Actylate SP 236L Soltech Ltd Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhes...view more Polyester Actylate SP 236L is a chlorinated polyester acrylate oligomer with TMPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 236L is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less
Polyester Actylate SP 238 Soltech Ltd Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesio...view more Polyester Actylate SP 238 is a chlorinated polyester acrylate oligomer with GPTA designed to provide adhesion on metal and paper, wet lithographic behavior, and pigment wetting. Common applications of this product include wet lithographic inks and adhesion promoting coatings. Polyester Actylate SP 238 is 60% polymer solid by weight with a viscosity of 1,200-1,800 at 25℃. view less
Dynoadd® F-800 Dynoadd by Dynea Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the...view more Dynoadd® F-800 is a multi functional, adhesion promoting flow and levelling agent. It modifies coating surfaces in such way that adhesion to polyurethane foam is considerably improved. As an effective flow and levelling additive, this product controls the surface tension of a coating thus eliminating surface defects such as orange peel, craters and pinholes. Dynoadd® F-800 also has a positive effect on both substrate and pigment wetting. view less Request Sample
Hartben 405 Benasedo Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for n...view more Hartben 405 is an armatic polymer and an ethyl acetate solvent, with an 80% solids content. This product has a viscosity [G.H.] of K-N and a colour [G.H.] maximum of 2. Hartben 405 is used in elastomeric polymers, plasticizers and adhesion promoters for nitrocellulose. It is also used in flexographic inks for paper and plastic substrates. view less Request Sample
EBECRYL® 1300 Allnex EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications f...view more EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion promoting properties. Suggested applications for EBECRYL® 1300 include: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items. view less Request Sample
Tyzor® IAM LEHVOSS Group Tyzor® IAM is specifically developed for the printing ink industry. It is a titanium-based phosphate complex that offers good stability in solvent-borne printing inks as well as good adhesion promotion and cross-linking properties resulting in improved wa...view more Tyzor® IAM is specifically developed for the printing ink industry. It is a titanium-based phosphate complex that offers good stability in solvent-borne printing inks as well as good adhesion promotion and cross-linking properties resulting in improved water, solvent, and heat resistance. it also has high reactivity during curing, low or no discoloration, and is effective at low concentrations. view less
Silane Coupling Agent KH-560 Zhejiang Feidian Chemical Co., Ltd. KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion...view more KH-560 is a epoxy-functional silane. It is a clear, light straw liquid. It may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. KH-560 is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less
Silane ATPN-187 Beijing Entrepreneur Science &Trading Co., Ltd. Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion...view more Silane ATPN-187 is an epoxy-functional silane, it is a clear, light straw liquid. ATPN-187 may used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders. It is particularly employed as an adhesion-promoting additive in waterborne systems, e.g. improving the adhesion of acrylic latex sealants. view less
Tyzor® 9000 LEHVOSS Group Tyzor® 9000 is a reactive organic alkoxy titanate with 100 % active content. It is a colorless to yellowish liquid which is sensitive to moisture. It can also act as a Lewis acid catalyst in applications such as esterification, transesterification, condensation, and addition. Tyzor® 9000 can effect adhesion...view more Tyzor® 9000 is a reactive organic alkoxy titanate with 100 % active content. It is a colorless to yellowish liquid which is sensitive to moisture. It can also act as a Lewis acid catalyst in applications such as esterification, transesterification, condensation, and addition. Tyzor® 9000 can effect adhesion promotion, cross-linking of polymers, and formation of polymeric titanium dioxide layers as binder or coating. view less
Tyzpr® AA-75 LEHVOSS Group Tyzpr® AA-75 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion...view more Tyzpr® AA-75 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion promotion, crosslinking of various functional polymers, or be used to form polymeric titanium dioxide layers as a binder or coating. view less
Tyzpr® AA LEHVOSS Group Tyzpr® AA is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion...view more Tyzpr® AA is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion promotion, crosslinking of various functional polymers, or be used to form polymeric titanium dioxide layers as a binder or coating. view less
Tyzpr® AA-65 LEHVOSS Group Tyzpr® AA-65 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion...view more Tyzpr® AA-65 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion promotion, crosslinking of various functional polymers, or be used to form polymeric titanium dioxide layers as a binder or coating. view less
Tyzor® PITA-SM LEHVOSS Group Tyzor® PITA-SM is a mixture of Tyzor® PITA and methyl-trimethoxy silane. It is a yellow to orange liquid which is sensitive to moisture. The high reactivity of this product at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion...view more Tyzor® PITA-SM is a mixture of Tyzor® PITA and methyl-trimethoxy silane. It is a yellow to orange liquid which is sensitive to moisture. The high reactivity of this product at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion promotion, cure rate. Tyzor® PITA-SM is is designed as a curing agent for silicone based sealants and adhesives. view less
Tyzpr® AA-105 LEHVOSS Group Tyzpr® AA-105 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion...view more Tyzpr® AA-105 is a titanium chelate with acetylacetonate as the chelating agent. Multiple grade exist with various product and end use properties. They are all yellow to red colored liquids and relatively stable in water for short periods of time. They can effect adhesion promotion, crosslinking of various functional polymers, or be used to form polymeric titanium dioxide layers as a binder or coating. view less
CYREZ® 963 Product Family (100% HMMM) Allnex Cyrez® 963 E Resin Liquid is a hexa methoxy methyl melamine (HMMM) used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexamethylene tetramine (HEXA or HMT) sys...view more Cyrez® 963 E Resin Liquid is a hexa methoxy methyl melamine (HMMM) used as a crosslinker for adhesion promoting and reinforcing systems in rubber applications. This product offers several advantages over the older hexamethylene tetramine (HEXA or HMT) system. Cyrez resins are relatively nontoxic and present little hazard of dermatitis. An additional advantage is that they are not corrosive to steel cord, polyester cord or metal molds. view less Request Sample
Eastman CP730-1 Adhesion Promoter Eastman Chemical B.V. Eastman CP 730-1 adhesion promoter is designed to be the active component in automotive adhesion promoter primers used to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) plastics for exterior and interior a...view more Eastman CP 730-1 adhesion promoter is designed to be the active component in automotive adhesion promoter primers used to ensure adhesion of color coats and topcoats to polypropylene (PP) and thermoplastic olefin (TPO) plastics for exterior and interior applications. view less
Tyzor® NPT LEHVOSS Group Tyzor® NPT, tetra-n-propyl titanate, is a highly reactive organic alkoxy titanate with 100% active content. It is a clear, colorless to yellowish liquid which is very sensitive to moisture. This product acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, addition. Tyzor® NPT can effect adhesion...view more Tyzor® NPT, tetra-n-propyl titanate, is a highly reactive organic alkoxy titanate with 100% active content. It is a clear, colorless to yellowish liquid which is very sensitive to moisture. This product acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, addition. Tyzor® NPT can effect adhesion promotion and crosslinking of polymers, or form polymeric titanium dioxide layers used as a binders or coatings. view less
Titanate FD-IAM Zhejiang Feidian Chemical Co., Ltd. Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion...view more Titanate FD-IAM is a new grade of titanate specifically developed for the printing ink industry. This new titanium-based phosphate complex helps overcome some of the identified performance issues. It offers the following features: good stability in solvent-borne printing inks, good adhesion promotion and cross-linking properties resulting in improved water, solvent, and heat resistance, high reactivity during curing, low or no discoloration, and no release of acetylacetone. view less
ITAMID FL520/S DKSH ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...view more ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. This product is available in Spain and Portugal. view less Request Sample
SiSiB® PC3100 SiSiB SILICONES SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion...view more SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
Tyzor® NPZ LEHVOSS Group Tyzor® NPZ, tetra-n-propyl zirconate, is a highly reactive organic alkoxy zirconate with 74% active content in n-propanol. This product is a yellowish to tan liquid which is very sensitive to moisture. Tyzor® NPZ acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, addition, and polymerizations. It can effect adhesion...view more Tyzor® NPZ, tetra-n-propyl zirconate, is a highly reactive organic alkoxy zirconate with 74% active content in n-propanol. This product is a yellowish to tan liquid which is very sensitive to moisture. Tyzor® NPZ acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, addition, and polymerizations. It can effect adhesion promotion and crosslinking of polymers, or form polymeric zirconium dioxide layers used as binders or coatings. view less
Tyzor® NBZ LEHVOSS Group Tyzor® NBZ is a highly reactive organic alkoxy zirconate with ca. 87% active content in n-butanol. It is a yellow organic liquid which is very sensitive to moisture. It can act as Lewis Acid catalyst in applications such as olefin polymerization (Ziegler-Natta), polyurethane formation, some esterification and transesterification reactions, and polycondensation. Tyzor® NBZ can effect adhesion...view more Tyzor® NBZ is a highly reactive organic alkoxy zirconate with ca. 87% active content in n-butanol. It is a yellow organic liquid which is very sensitive to moisture. It can act as Lewis Acid catalyst in applications such as olefin polymerization (Ziegler-Natta), polyurethane formation, some esterification and transesterification reactions, and polycondensation. Tyzor® NBZ can effect adhesion promotion, cross-linking of polymers, or form polymeric zirconium dioxide layers as a binder or coating. view less
Eastman CP347W Waterborne Adhesion Promoter Eastman Chemical B.V. An oil-in-water type emulsion based on Eastman CPO and 2-amino-2-methyl-1-propanol, with no organic solvent. Its chief use in coatings is as an adhesion promoter for polypropylene-based substrates.
Tyzor® TOT LEHVOSS Group Tyzor® TOT, a reactive organic alkoxy titanate with 100% active content, is a clear colorless to yellowish liquid. While still a highly reactive orthoester, this product is less sensitive to moisture than other Tyzor® products. Tyzor® TOT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion...view more Tyzor® TOT, a reactive organic alkoxy titanate with 100% active content, is a clear colorless to yellowish liquid. While still a highly reactive orthoester, this product is less sensitive to moisture than other Tyzor® products. Tyzor® TOT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion promotion and cross-linking of polymers, or form polymeric titanium dioxide layers used as a binder or coating. view less
AMPARMOR 1043 DKSH AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating appl...view more AMPARMOR 1043 is a uniquely engineered two-part system of microcapsules containing a patented blend of healing agent based on silicone-based resins, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. AMPARMOR 1043 is recommended for use in liquid solvent-based, and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less Request Sample
AMPARMOR 2000 DKSH The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...view more The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less Request Sample
Tyzor® TnBT LEHVOSS Group Tyzor® TnBT (tetra-n-butyl titanate) is a highly reactive organic alkoxy titanate with 100% active content. It is a clear, colorless to pale yellow liquid that is very sensitive to moisture. Tyzor® TnBT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion...view more Tyzor® TnBT (tetra-n-butyl titanate) is a highly reactive organic alkoxy titanate with 100% active content. It is a clear, colorless to pale yellow liquid that is very sensitive to moisture. Tyzor® TnBT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion promotion and cross-linking of polymers, or to form polymeric titanium dioxide layers used as a binder or coating. view less
Tyzor® PITA LEHVOSS Group Tyzor® PITA is a yellow to orange liquid which is sensitive to moisture. It is a titanium ethyl acetoacetate complex with 100% active content. With a freezing point of approximately 28°C (82ºF), Tyzor® PITA may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. The high reactivity of this prdocut at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion...view more Tyzor® PITA is a yellow to orange liquid which is sensitive to moisture. It is a titanium ethyl acetoacetate complex with 100% active content. With a freezing point of approximately 28°C (82ºF), Tyzor® PITA may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. The high reactivity of this prdocut at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion promotion, and cure rate. view less
AMPARMOR 3000 DKSH The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...view more The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less Request Sample
Tyzor® OGT LEHVOSS Group Tyzor® OGT, a 1005 active, reactive organic alkoxy titanate, is a colorless to yellowish organic liquid which is sensitive to moisture. While still a highly reactive titanate, this product is less sensitive to moisture than Tyzor® TPT and Tyzor® TnBT. Tyzor® OGT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion...view more Tyzor® OGT, a 1005 active, reactive organic alkoxy titanate, is a colorless to yellowish organic liquid which is sensitive to moisture. While still a highly reactive titanate, this product is less sensitive to moisture than Tyzor® TPT and Tyzor® TnBT. Tyzor® OGT acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion promotion and cross-linking of polymers, or form polymeric titanium dioxide layers used as a binder or coating. view less
Tyzor® BTP LEHVOSS Group Tyzor® BTP is a polymeric butyl titanate with 100 % active content. Tyzor® BTP is a clear yellowish organic liquid which is very sensitive to moisture. It has a very high TiO2 content and releases a lower amount of VOC’s compared with many other Tyzor® products. It acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, and addition. Tyzor® BTP can effect adhesion...view more Tyzor® BTP is a polymeric butyl titanate with 100 % active content. Tyzor® BTP is a clear yellowish organic liquid which is very sensitive to moisture. It has a very high TiO2 content and releases a lower amount of VOC’s compared with many other Tyzor® products. It acts as a Lewis Acid catalyst in processes such as esterification, transesterification, condensation, and addition. Tyzor® BTP can effect adhesion promotion and crosslinking of polymers, or form polymeric titanium dioxide layers used as binders or coatings. view less
K-PURE® CDI-4308 King Industries, Inc. K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE®...view more K-PURE® CDI-4308 is a 100% active organic liquid additive that is based on a proprietary heterocyclic amine derivative. K-PURE® CDI-4308 has an affinity for soft metals, which can help with corrosion prevention, adhesion promotion and lubrication. K-PURE® CDI-4308 was created for solvent based and solventless systems. It appears as a clear amber liquid and offers low viscosity, compatibility with many solvents & resins, and it is a solventless liquid. This product can be used in any application that needs corrosion prevention. view less
K-PURE® CDR-3316 King Industries, Inc. K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion...view more K-PURE® CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with main hydroxyl groups. This product was created to improve flexibility and enhance flow without effecting the hardness of the system. Usual formations include cationic cured epoxies, aminoplast, siloxane and urethane based systems. It appears as a clear, light straw liquid and offers adhesion promotion and resistivity. This product is soluble in esters, alcohols, xylene, aromatic 100 & aromatic 150, ketones, and is insoluble in water. It can be applied in anti-reflective coatings, conformal coatings, and conductive & dielectric adhesives. view less
K-PURE® CDR-3314 King Industries, Inc. K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution a...view more K-PURE® CDR-3314 is a reactive, aliphatic polyester polyol, that is suggested for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution and original chemical structure produce consistent performance and compatibility. This product appears as a clear, light straw liquid and offers good flexibility, resistivity, low VOC, and adhesion promotion. It is soluble in esters, xylene, ketones, alcohols, aromatic 100 & aromatic 150, and is insoluble in water. It can be applied in conductive adhesives, dielectric adhesives, anti-reflective coatings, and conformal coatings. view less
Tyzor® TPT LEHVOSS Group Tyzor® TPT (tetra-isopropyl titanate) is a 100% active, highly reactive organic alkoxy titanate. It is a clear, colorless to yellowish liquid that is very sensitive to moisture. With a freezing point of approximately 19°C (66ºF), Tyzor® TPT may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. It acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion...view more Tyzor® TPT (tetra-isopropyl titanate) is a 100% active, highly reactive organic alkoxy titanate. It is a clear, colorless to yellowish liquid that is very sensitive to moisture. With a freezing point of approximately 19°C (66ºF), Tyzor® TPT may crystallize at low temperatures. If crystallization occurs, the product can be readily re-dissolved by warming and agitation. It acts as a Lewis acid catalyst in processes such as esterification, transesterification, condensation and addition. It can also be used to effect adhesion promotion and cross-linking of polymers, or to form polymeric titanium dioxide layers used as a binder or coating. view less
Silane Coupling Agent KH-7180 Zhejiang Feidian Chemical Co., Ltd. KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This ...view more KH-7180 is a versatile epoxy organo-reactive silane with two hydrolyzable ethoxy groups. It provides shelf stable non-yellowing adhesion promoter performance while enhancing physical properties in latexes and waterborne adhesive and sealant systems. This product is recommended for automotive laminate adhesives, furniture laminate adhesives, and flocking adhesives. view less
Tyzor® TBT-15B LEHVOSS Group Tyzor® TBT-15B is a mixture of Tyzor® TPT and Tyzor® TnBT. It is a highly reactive organic alcoxy titanates that is a clear, colorless to yellowish liquid which is very sensitive to moisture. While the reactivity is similar to that of Tyzor® TPT, an advantage of this product is that it has a very low pour point. It acts as a Lewis Acid catalyst in processes such as esterfication, transesterfication, condesation, and addition. It can also be used to effect adhesion...view more Tyzor® TBT-15B is a mixture of Tyzor® TPT and Tyzor® TnBT. It is a highly reactive organic alcoxy titanates that is a clear, colorless to yellowish liquid which is very sensitive to moisture. While the reactivity is similar to that of Tyzor® TPT, an advantage of this product is that it has a very low pour point. It acts as a Lewis Acid catalyst in processes such as esterfication, transesterfication, condesation, and addition. It can also be used to effect adhesion promotion and crosslinking of polymers, or to form polymeric titanium dioxide layers used as a binder or coating. view less
Tyzor® ET LEHVOSS Group Tyzor® ET, tetra ethyl titanate, is a reactive organic titanate with 100 % active content that contains a small amount of isopropoxy groups to keep the product as a liquid. The product is a pale yellow liquid which is very sensitive to moisture. This product is solvent free and contains the highest titanium content of products in the Tyzor® product line. Tyzor® ET acts as Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion...view more Tyzor® ET, tetra ethyl titanate, is a reactive organic titanate with 100 % active content that contains a small amount of isopropoxy groups to keep the product as a liquid. The product is a pale yellow liquid which is very sensitive to moisture. This product is solvent free and contains the highest titanium content of products in the Tyzor® product line. Tyzor® ET acts as Lewis acid catalyst in processes such as esterification, transesterification, condensation, and addition. It can effect adhesion promotion, cross-linking of polymers, or form polymeric titanium dioxide layers used as a binder or coating. view less
Tyzor® IBAY LEHVOSS Group Tyzor® IBAY is a 100% active titanium ethyl acetoacetate complex. It is a yellow to red colored liquid which is sensitive to moisture.The high reactivity of this product at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion...view more Tyzor® IBAY is a 100% active titanium ethyl acetoacetate complex. It is a yellow to red colored liquid which is sensitive to moisture.The high reactivity of this product at low temperatures enables it to react with common functional groups to effect crosslinking, adhesion promotion, and coating formation of polymers, mineral substrates, and metals. It may also be used as a drying agent due to its high reactivity with water. Tyzor® IBAY is especially suited for crosslinking of silicones and silanol end-capped polymers. It may also be used as a catalyst in processes such as esterification, transesterification, addition, and polycondensation. view less
Tyzor® LA LEHVOSS Group Tyzor® LA is a hydrolytically stable, chelated titanium solution that is a clear to slightly hazy, colorless to light yellow aqueous liquid with active content. It is a water based titanium chelate that is stable in water at pH 7, making it an excellent choice for use in aqueous systems. This product is stable so long as the pH is maintained around 7-8. Tyzor® LA can act as a catalyst in applications such as esterification, transesterification, and condensation. It can effect cross-linking of OH functional polymers, adhesion...view more Tyzor® LA is a hydrolytically stable, chelated titanium solution that is a clear to slightly hazy, colorless to light yellow aqueous liquid with active content. It is a water based titanium chelate that is stable in water at pH 7, making it an excellent choice for use in aqueous systems. This product is stable so long as the pH is maintained around 7-8. Tyzor® LA can act as a catalyst in applications such as esterification, transesterification, and condensation. It can effect cross-linking of OH functional polymers, adhesion promotion, and formation of polymeric titanium dioxide as binder or coating. view less
Eastman Advantis™ 510W Eastman Chemical B.V. Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blen...view more Eastman Advantis™ 510W is Eastman's next generation waterborne product for adhesion to thermoplastic polyolefin based plastics (TPO, PP). Eastman Advantis™ 510W is chlorine-free and APEO-free. Eastman Advantis™ 510W will find primary application as a blend-in resin in waterborne primers and waterborne basecoats for automotive bumper applications. Eastman Advantis™ 510W can also be used as a wash primer and is suitable as an adhesion promoter for applications beyond automotive. Eastman Advantis™ 510W provides excellent adhesion on non-flame treated EPDM rubber modified polypropylene substrates. view less
GENORAD* 41 Rahn AG GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations fro...view more GENORAD* 41 is a methacrylated phosphate ester for radically curable inks, coatings, and adhesives. This newly-launched adhesion promoter is recommended for difficult substrates such as metal, glass and plastics. It is typically used in concentrations from 1% to 5%. view less Request Sample
SiSiB® PC3200 SiSiB SILICONES SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC3300 SiSiB SILICONES SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC1200 SiSiB SILICONES SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or ...view more SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. view less
SiSiB® PC3400 SiSiB SILICONES SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
SiSiB® PC1118 SiSiB SILICONES SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications inc...view more SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine resins; a primer or additive in sealants and adhesives; mineral-filled polymers (composites) or HFFR cables; pretreatment of fillers and pigments; improvement of adhesion to the substrate in paints and coatings; improvement of flexural strength, tensile strength, impact strength and modulus of elasticity; or resistance to moisture and corrosion. view less
SiSiB® PC1130 SiSiB SILICONES SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for...view more SiSiB® PC1130 is a colorless to yellowish liquid with an amine-like odor which is soluble in alcohols and aliphatic and aromatic hydrocarbons. It acts as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for material changes to chemical substances. It can be used as an additive to cold-curing phenolic and furan foundry resins; as a size constituent or finish in glass fiber/glass fabric composites; in glass and metal primers; as an additive to phenolic resin binders in abrasives; as primer or additive and for chemical modification in sealants and adhesives; for pretreatment of fillers and pigments or as additive in mineral-filled composites; for synthesis of functional silicones; for improvements in adhesion or mechanical properties including flexural strength, tensile strength, impact strength and modulus of elasticity; or for resistance to moisture and corrosion. view less
SiSiB® PC3510 SiSiB SILICONES SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3510 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), or in waterborne coating formulations, to improve solvent, impact and mar resistance, wet and dry adhesion, also stain resistance in wood and automotive plastic coatings. view less
SiSiB® PC3500 SiSiB SILICONES SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers),...view more SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. view less
BYK-4513 BYK BYK-4513 is an adhesion promoter for 2K aqueous epoxy systems to increase adhesion to metal substrates and corrosion resistance. It is used in aqueous epoxy-based coating systems as an adhesion promoter for metal substrates. It increases the wet and dry a...view more BYK-4513 is an adhesion promoter for 2K aqueous epoxy systems to increase adhesion to metal substrates and corrosion resistance. It is used in aqueous epoxy-based coating systems as an adhesion promoter for metal substrates. It increases the wet and dry adhesion and the mechanical resilience, and can also help to improve the corrosion resistance of the coating. The polymeric character of BYK-4513 and its attachment to the metal-coating interface also provide more flexibility to the film coating. BYK-4513 is silane free and has outstanding storage stability. view less
K-PURE® CDR-3317 King Industries, Inc. K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for ami...view more K-PURE® CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is suggested to be used in systems that require adhesion promotion, chemical resistance, and hardness development. K-PURE® CDR-3317 is ideal for aminoplast resins, siloxanes and urethanes. K-PURE® CDR-3317 also acts as a compatibilizer or coalescing aid, with the benefit of co-reacting with the system. It appears as a viscous, clear liquid and offers low VOC. This product is soluble in water, almost all organic solvents, and is insoluble in aromatic solvents. It can be applied in conformal coatings, adhesives & sealants, and anti reflective coatings. view less
HARDLEN 15-LP DKSH HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated p...view more HARDLEN 15-LP is and adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN 15-LP has suitable properties for printing ink on polypropylene films. HARDLEN 15-LP has the following properties: excellent adhesion to untreated polypropylene films and good solubility in solvent (Toluene). This product is available in Europe and North America. view less Request Sample
Borchi® Gen HMP-F OMG Borchers GmbH Borchi® Gen HMP-F is an additive to improve adhesion, used mainly in baking paints and primers. This product is completely silicone-free. Borchi® Gen HMP-F is used to improve adhesion, predominantly in baking systems. In addition to improved adhesion, inc...view more Borchi® Gen HMP-F is an additive to improve adhesion, used mainly in baking paints and primers. This product is completely silicone-free. Borchi® Gen HMP-F is used to improve adhesion, predominantly in baking systems. In addition to improved adhesion, increased film elasticity is also achievable. view less
Propylene Carbonate Arrow Chemical Group Qingdao Aspirit Chemical Co Ltd. Propylene Carbonate is an organic compound with the formula C4H6O3. It has multiple applications for use in the production of; lithium battery electrolytes, adhesives, polyurethane coatings, synthetic fibers, household cleaners, foundry resins and related...view more Propylene Carbonate is an organic compound with the formula C4H6O3. It has multiple applications for use in the production of; lithium battery electrolytes, adhesives, polyurethane coatings, synthetic fibers, household cleaners, foundry resins and related applications. view less
TTA21 Hainan Zhongxin Chemical Co., Ltd. TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for pain...view more TTA21 3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate is a pale yellow to colorless transparent liquid that is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It is primarily used as an additive for paints and coatings, it’s low viscosity and good fluidity makes it suitable for use in bulk manufacturing. view less
Bonding Agent 51030 Rhein Chemie Rheinau GmbH Bonding Agent 51030 is a solvent-free one-component bonding agent that appears as a yellow viscous liquid. Bonding Agent 51030 is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide.
Bonding Agent 51030 N Rhein Chemie Rheinau GmbH Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC...view more Bonding Agent 51030 N is a preparation of a polyisocyanurate in di-iso-nonyl phthalate (DINP) that appears as a yellow viscous liquid. Bonding Agent 51030 N functions as a solvent-free one-component bonding agent and is used to improve the adhesion of PVC plastisol coatings to substrates made of polyester or polyamide. view less
Tyzor® 215 LEHVOSS Group Tyzor® 215 is a zirconium chelate with approximately 28% active ingredient in mixed alcohol solution. It is a clear, slightly viscous, light-to-medium yellow liquid that is not affected by freezing and thawing. It reacts with water by hydrolysis to form a reactive hydroxy zirconium chelate that is stable in water for extended periods. Tyzor® 215 is an effective cross-linker that forms high viscosity aqueous gels in dispersions of guar and its derivatives used in oil and gas well fracturing applications. It also cross-links polymers and binders in solvent-borne and water-borne coatings and printing inks, improving film strength, adhesion...view more Tyzor® 215 is a zirconium chelate with approximately 28% active ingredient in mixed alcohol solution. It is a clear, slightly viscous, light-to-medium yellow liquid that is not affected by freezing and thawing. It reacts with water by hydrolysis to form a reactive hydroxy zirconium chelate that is stable in water for extended periods. Tyzor® 215 is an effective cross-linker that forms high viscosity aqueous gels in dispersions of guar and its derivatives used in oil and gas well fracturing applications. It also cross-links polymers and binders in solvent-borne and water-borne coatings and printing inks, improving film strength, adhesion promotion and rheology control. view less
SR9051P Sartomer Europe division of Arkema SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on g...view more SR9051P is a unique acidic triacrylate adhesion promoter that is typically recommended for use at 1-20% by weight in free-radical polymerization, UV and EB applications. This product is recommended to maximize adhesion of coatings, inks and adhesives on glass and metals. view less
HARDLEN HM-21P DKSH HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARD...view more HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN HM-21P main characteristics are: good adhesion to PP, TPO(Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatment, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint, excellent resistance against Water, Gasoline and Gasohol after top-coating. This product is available in Europe and North America. view less Request Sample
HARDLEN DX-530P DKSH HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents...view more HARDLEN DX-530P is an adhesion promoter for polyolefin. It has an excellent solubility in various solvents, and solution stability is very good at low temperature. HARDLEN DX-530P has the following characteristics: excellent solubility in various solvents and solution stability is very good at low temperature. This product is available in Europe and North America. view less Request Sample
HARDLEN CY-9122P DKSH HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without so...view more HARDLEN CY-9122P is an adhesion promoter for polyolefin. It has a good adhesion to polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9122P: Good adhesion to PP,TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less Request Sample
HARDLEN CY-9124P DKSH HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates wit...view more HARDLEN CY-9124P is an adhesion promoter for polyolefin. It has a good adhesion to Polypropylene, TPO and EPDM. Main characteristics of HARDLEN CY-9124P are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", Good interlayer adhesion between primer and top-coat paint such as 2K system using Polyurethane, Excellent resistance against Water, Humidity and Gasoline after top-coating, Easily soluble in toluene, hydrocarbons, also soluble in cyclic hydrocarbons and easy dissolving in non-aroma solvents such as Methyl-cyclohexane or Ester mixture. This product is available in Europe and North America. view less Request Sample
BYK®-4509 BYK BYK-4509 is an adhesion promoter for solvent-borne and aqueous systems applied to metallic substrates. It is compatible with most binders and is therefore ideal for universal use. This product is a salt of a polymer with acidic groups.
SiSiB® PC4300 SiSiB SILICONES SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical ...view more SiSiB® PC4300 is a clear, light and heat sensitive liquid with a faintly sweet odour. It is a methacryl-functional silane. It is used as adhesion promoter at organic/inorganic interfaces, as surface modifier; as a coupling agent to improve the physical and electrical properties of glass-reinforced and mineral-filled thermosetting resins under exposure to heat and/or moisture; to functionalize resins via radical initiated processes - copolymerization or grafting - and to modify surfaces; improve strength as glass fiber size composite in reinforced polyester composites; enhance initial and wet strength of reinforced polyester resin composites; enhance the wet electrical properties of many mineral-filled and reinforced composites; and improve adhesion and durability of adhesives and coatings. view less
HARDLEN M-28P DKSH HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLE...view more HARDLEN M-28P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN M-28P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN M-28P main characteristics are good adhesion to PP, TPO(Thermoplastic Olefin Elastomer),PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments ,such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less Request Sample
ADDITOL® XL 186 Allnex Additol® XL 186 is a specific, high efficiency additive which improves the intercoat adhesion of top coats or surfacers to primers. Request Sample
Chlorinated Rubber-YURON CR-130 Yuron New Material YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most est...view more YURON CR-130 is chlorinated rubber supplied as a white powder. It is mostly used as an adhesive raw material for rubber to metal applications. This product is soluble in most aromatic solvents, such as toluene or xylene, and it is also soluble in most esters. view less
3# Water-Based Sealing Coating Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer.