| Tolonate™ HDB 75 MX | Vencorex | Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and meta...view more Tolonate™ HDB 75 MX is an aliphatic polyisocyanate biuret (HDI homopolymer) supplied at 75% solids in a blend of methoxypropyl acetate and xylene. It is used for conventional two component polyester/alkyd urethanes and topcoats for transportation and metallic devices. This product is also recommended for high durability protective coatings for industrial maintenance. view less | |
| Tolonate™ HDB-LV | Vencorex | Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as...view more Tolonate™ HDB-LV is a low viscosity solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate biuret (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solvent-free polyurethane systems, and as an intermediate for prepolymer synthesis. This product is also recommended for exterior protective coatings for car repair, general industrial, plastic, and wood applications. view less | |
| Tolonate™ HDT | Vencorex | Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exter...view more Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive, industrial machinery, plastic parts and car repair. view less | |
| Tolonate™ HDT 90 | Vencorex | Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and va...view more Tolonate™ HDT 90 is an aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer) supplied at 90% solids in a blend of butyl acetate and aromatic hydrocarbon. It is used for high solids two-component polyurethane coatings and varnishes. This product is also suggested for exterior protective coatings for automotive OEM, car repair, industrial machinery, and plastic parts. view less | |
| Tolonate™ HDT 90 B | Vencorex | Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. ...view more Tolonate™ HDT 90 B is an aliphatic polyisocyanate trimer (HDI homopolymer) supplied at 90% solids in a butyl acetate. It is used for high solids two-component polyurethane coatings and varnishes as well as aromatic solvent-free 2 K polyurethane coatings. This product is also suggested for exterior protective coatings for automotive OEM, car repair, indutrial machinery, and plastic parts. view less | |
| Tolonate™ HDT-LV | Vencorex | Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and in...view more Tolonate™ HDT-LV is a low viscosity, solvent-free aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). It is used for high solids two-component polyurethane coatings and varnishes, solventfree polyurethane systems, and intermediate for prepolymer synthesis. This product is also suggested for exterior protective coatings for automotive OEM, industrial machinery, plastic parts and car repair. view less | |
| Tolonate™ HDT-LV2 | Vencorex | Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used ...view more Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used for very high solids, low VOC, two component polyurethanes coatings and varnishes. This product is also suggested for solventfree and waterborne polyurethane systems as well as polyurethane resin synthesis intermediates. view less | |
| Tolonate™ X FD 90 B | Vencorex | Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-p...view more Tolonate™ X FD 90 B is a fast drying aliphatic polyisocyanate based on high functionality hexamethylene diisocyanate trimer (HDI homopolymer) supplied at 90% solids in butyl acetate. It is suggested for use as a hardener of fast drying non-yellowing two-pack polyurethane coatings for car repair, marine and protective, ACE and machinery, aerospace, general industry, automotive OEM and plastic parts. view less | |
| Tolonate™ IDT 70 B | Vencorex | Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resista...view more Tolonate™ IDT 70 B is an aliphatic polyisocyanate based on Isophorone Diisocyanate trimer (IPDI homopolymer) supplied at 70% solids in butyl acetate. It is used for two-component polyurethane coatings and varnishes, showing an excellent weathering resistance. This product is also suitable for exterior protective coatings for automotive OEM and car repair, general industrial, plastics, and wood applications. view less | |
| Tolonate™ X FLO 100 | Vencorex | Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of pol...view more Tolonate™ X FLO 100 is a partially bio-based, solvent-free and low viscosity aliphatic isocyanate polymer. It is particularly designed to product solvent-free polyurethane and polyurea materials and/or to reduce volatile organic compounds emissions of polyurethane solvent-based formulations. view less | |
| DETDA E-100 | Keeneyes International Co., Ltd. | DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy...view more DETDA E-100 (Diethyl Toluene Diamine) is supplied as a light yellow transparent liquid. It is a good chain extender of PU elastomer, especially for RIM and SPUA. It is also used as a curing agent of polyurethane and epoxy resin, as an antioxidant in epoxy resins, in industrial oils, and lubricants. In addition, it can be used as an organic synthesis intermediate. view less | |
| DMTDA E-300 | Keeneyes International Co., Ltd. | DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20...view more DMTDA E-300 (Dimethyl Thio-Toluene Diamine is supplied as a light yellow transparent liquid. It is a new-model polyurethane elastomer curing cross-linking agent. It has two kinds of isomers, a mixture of 2,4- and 2,6-DMTDA (proportion is about 77~80/17~20). Compared with common MOCA, it is lower-viscosity liquid at normal temperature, it has features such as low temperature operations and low dosage. view less | |
| Water-based Acrylic Emulsion BT-WBE1133 | BELIKE Chemical Co.,Ltd. | Water-based Acrylic Emulsion BT-WBE1133 is a self-cross linking acrylic emulsion that has good alkali resistance, excellent transparency, and quick drying properties. This product is most commonly used in water-based wood coatings. | |
| Water-based Acrylic Emulsion BT-WBE3000 | BELIKE Chemical Co.,Ltd. | Water-based Acrylic Emulsion BT-WBE3000 is a self-cross linking acrylic emulsion that has good alkali resistance, excellent hardness, and quick drying properties. This product is most commonly used in water-based wood coatings. | |
| PHENODUR® PR 898/52BGB | Allnex | PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant...view more PHENODUR® PR 898 is a heat curing unplasticized phenolic resin. It is used in heat-curing phenolic-epoxide resin-combinations for interior and exterior coatings of metal packaging containers employed in the food industry; high adhesion, chemical resistant protective coatings for apparatus, vessels and pipelines. Excellent flexibility and retort resistance; low reactivity. The cured film is slighty golden in color. Catalyst CYCAT XK 406 N is necessary. view less | Request Sample |
| WANNATE™ HEMA-98 | Wanhua Chemical Group Co., Ltd. | WANNATE™ HEMA-98 is a colorless liquid at room temperatures. It is widely used in the adhesion promoter of polymers, thermosetting coatings, hydrophilic polymers and photo crosslinking polymers. | |
| CYMEL® 370 | Allnex | CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resista...view more CYMEL® 370 resin is a partially methylated melamine crosslinker supplied in iso-butanol. Like other high imino resins, CYMEL® 370 is fast reacting and has a high tendency to self-condense resulting in films with high film hardness, gloss, chemical resistance and exterior durability. The high reactivity, combined with high solids content makes CYMEL® 370 resin suitable for a wide range of solventborne and waterborne industrial bake formulations. view less | Request Sample |
| DESMODUR® RN | Covestro | A solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. Is suitable for crosslinking adhesives based on Desmocoll, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials. The use of ...view more A solution of a polyisocyanurate with aliphatic and aromatic NCO groups in ethyl acetate. Is suitable for crosslinking adhesives based on Desmocoll, natural or synthetic rubber, especially pale-coloured adhesives used to bond rubber materials. The use of suitable adhesives yields bonds which undergo minimal discoloration on exposure to light. view less | |
| CYMEL® U-216-8 | Allnex | CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion ...view more CYMEL® U-216-8 resin is a partially n-butylated urea crosslinking agent supplied in a mixture of n-butanol and xylene. It displays excellent compatibility with most hydrophobic resins, such as epoxies, and can contribute to improved leveling and adhesion characteristics. This product is recommended as a crosslinking resin in primer coatings, can coatings, and metal deco finishes. view less | Request Sample |
| Methyltris(methylethylketoximino)silane (MOS) | Quzhou Dayixin Chemical Co., Ltd. | Methyltris(methylethylketoximino)silane (MOS) is a colorless to light yellow transparent liquid that can crosslink with water and generate 2-butanone oxime. This product can be used as a cross-linking agent for silicone sealant. | |
| SiSiB® PC4150 | SiSiB SILICONES | SiSiB® PC4150 is a colorless to straw transparent liquid. It is a methacryl functional silane, mainly used as a crosslinker for 100% acrylic latexes. It is especially useful in coatings applications where increased solvent and water resistance, mar resis...view more SiSiB® PC4150 is a colorless to straw transparent liquid. It is a methacryl functional silane, mainly used as a crosslinker for 100% acrylic latexes. It is especially useful in coatings applications where increased solvent and water resistance, mar resistance, wet and dry adhesion, pigment binding and scrub resistance, films hardness and tensile strength. view less | |
| AMPARMOR 2000 | DKSH | The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating...view more The AMPARMOR 2000 series is a uniquely engineered microcapsule containing a patented blend of healing agent based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 2000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, polyurethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
| Luna-cure RFE | DKSH | Lunacure RFE is a highly efficient crosslinker. It can be used for adhesives based on polyurethane, synthetic or natural rubber. It also improves adhesion to rubber-based substrates. This product is available in Europe, Asia and North America. | Request Sample |
| AMPARMOR 3000 | DKSH | The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating ap...view more The AMPARMOR 3000 series is a uniquely engineered microcapsule containing a patented healing agent blend based on epoxy functionalized alkyd polymers, co-crosslinking agents/enhancers and adhesion promoters. These microcapsules are designed for coating applications where coating self-healing is needed for extended coating durability. The AMPAMOR 3000 series is recommended for use in solvent-based, water-based and powder coatings, and is compatible with most coating resin types including epoxy, polyester, alkyd, urethane and acrylic systems. This product is available in Europe, Asia Pacific and North America. view less | Request Sample |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...view more Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. view less | |
| D-34 | BlueSky Chemical Co., Ltd. | D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330...view more D-34 is an oxime silane-based crosslinker, low-ketoxime raw material. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as a neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 1.0330 g/ml. view less | |
| WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufac...view more WorléeCryl® A 2445 (60% In Xylene/Solvesso 100/Butyl Acetate 2:1:1) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is a hydroxyfunctional acrylic-copolymer for the manufacture of high quality 2 component top coats. Paints based on W´Cryl A 2445 show excellent resistances against weather and chemicals. view less | |
| DESMODUR® CD-L | Covestro | A modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because the composition o...view more A modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. It can be used in food-related applications, because the composition of the product is consistent with guideline EC 2002/72 and conforms to FDA 175 105. view less | |
| DESMODUR® CD-S | Covestro | A modified isocyanate based on diphenylmethane-4,4'-diisocyanate. Its main application is as the isocyanate component in the production of polyurethane foams, elastomers and adhesives. | |
| DESMODUR® PC-N | Covestro | A modified diphenyl-methane-4,4'-diisocyanate (MDI) that is liquid at room temperature and is suitable for combination with Baycoll in the formulation of adhesives. | |
| DESMODUR® VK 10 | Covestro | A mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI) that is suitable for combination with Baycoll in the formulation of adhesives. | |
| DESMODUR® VK 10 L | Covestro | A mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI) that is suitable for combination with Baycoll in the formulation of adhesives. | |
| DESMODUR® VKS 20 | Covestro | A mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI) that is suitable for combination with Baycoll in the formulation of adhesives. | |
| DESMODUR® VKS 20 F | Covestro | A mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI) that is suitable for combination with Baycoll in the formulation of adhesives. | |
| Desmodur® 44 V 70 L | Covestro | Desmodur® 44 V 70 L is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This mixture of monomeric polyisocyanates in connection with Baycoll® is suitable for the construction of solvent-free adhesi...view more Desmodur® 44 V 70 L is a mixture of diphenylmethane-4,4'-diisocyanate (MDI) with isomers and higher functional homologues (PMDI). This mixture of monomeric polyisocyanates in connection with Baycoll® is suitable for the construction of solvent-free adhesives. view less | |
| Bayhydur® XP 2547 | Covestro | Bayhydur® XP 2547 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as a hardener for near zero VOC waterborne 2K polyurethane coatings. | |
| Basic Chromic Chloride Powder | McGean-Rohco, Inc. | Basic Chromic Chloride Powder is a green powder. It is used as an intermediate in the manufacture of chromium compounds, vapor, chromium plating, and waterproofing compounds. It is also used as a mordant in textile dyeing and as a cross linking agent. | |
| Polydo SC-4508 | Kukdo Chemical Co., Ltd. | Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or i...view more Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo ED-500 | Kukdo Chemical Co., Ltd. | Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo ED-750 | Kukdo Chemical Co., Ltd. | Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Glyoxal 40% | Dalian Onichem Co., Ltd. | Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture...view more Glyoxal 40% is a colorless to pale yellow and transparent liquid which boils at 104°C. It is most widely used as a cross-linking agent in the production of permanent press resins for textiles, of moisture resistant glues and adhesives, as well as moisture resistant foundry binders. Glyoxal 40% is also used to improve the wet strength of paper and the moisture resistance of leather. view less | Request Sample |
| JEFFLINK® 136 Diamine | Huntsman Performance Products | JEFFLINK® 136 Diamine is a cycloaliphatic bis(secondary amine) chain extender for light-stable polyurea or polyurethane spray elastomer and coating systems where a slower reaction of amines is desirable. | |
| PHENODUR® PR 787/50MP | Allnex | PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or...view more PHENODUR® PR 787/50MP is an ultra low formaldehyde, heat curable, BPA NI phenolic resin. It is used in heat-curable phenolic coatings in combinations with epoxide or polyester resin, high-adhesion, chemically resistant protective coatings for interior or exterior can coatings and metal drum linings. view less | Request Sample |
| Polydo DP-400 | Kukdo Chemical Co., Ltd. | Polydo DP-400 polyether polyol is 400 molecular weight polyether diol. It is applied to a variety of applications. DP-400 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. | |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...view more Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...view more Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| Polydo GY-250 | Kukdo Chemical Co., Ltd. | Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...view more Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| Polydo GY-700 | Kukdo Chemical Co., Ltd. | Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...view more Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| Polydo GY-750P | Kukdo Chemical Co., Ltd. | Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with ot...view more Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| Polydo GY-1000 | Kukdo Chemical Co., Ltd. | Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...view more Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| Polydo GY-3500 | Kukdo Chemical Co., Ltd. | Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-5100 | Kukdo Chemical Co., Ltd. | Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot...view more Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less | |
| Polydo GY-600E | Kukdo Chemical Co., Ltd. | Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most p...view more Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| Polydo GY-3000E | Kukdo Chemical Co., Ltd. | Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers. | |
| Polydo GY-3010E | Kukdo Chemical Co., Ltd. | Polydo GY-3010E polyether polyol is a glycerine initiated, nominal 3,000 molecular weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-3300E | Kukdo Chemical Co., Ltd. | Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell...view more Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell-opener for high resilient flexible foam and cold molded flexible foam. view less | |
| Polydo GY-5000E | Kukdo Chemical Co., Ltd. | Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...view more Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less | |
| Polydo GY-6000E | Kukdo Chemical Co., Ltd. | Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...view more Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less | |
| Polydo ST-480 | Kukdo Chemical Co., Ltd. | Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...view more Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation prepolymer process. view less | |
| Polydo ST-481 | Kukdo Chemical Co., Ltd. | Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...view more Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-357 | Kukdo Chemical Co., Ltd. | Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...view more Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-381 | Kukdo Chemical Co., Ltd. | Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...view more Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-400 | Kukdo Chemical Co., Ltd. | Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the p...view more Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. view less | |
| Polydo SC-450 | Kukdo Chemical Co., Ltd. | Polydo SC-450 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the pre-polymer process. | |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...view more Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less | |
| Polydo SC-490 | Kukdo Chemical Co., Ltd. | Polydo SC-490 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the prepolymer process. | |
| PHENODUR® PR 825/70MPAC | Allnex | PHENODUR® PR 825 is a Bisphenol A-free, heat curing, non-plasticized phenolic resin. Very light color, excellent flexibility and good sulphur resistance, medium reactivity, for BADGE- and BPA-NI usage, “coil for can” cycle and foils. | Request Sample |
| PHENODUR® PR 566/65BX | Allnex | PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer o...view more PHENODUR® PR 566 is a Bisphenol A - free, heat-curing, non-plasticized phenolic resin. It is used in heat curable phenolic/polyester resin combinations (BADGE & BPA-NI lacquers) as well as phenolic/epoxy resin systems for the interior and exterior layer of metal containers with high adhesion, excellent flexibility and good chemical resistance. view less | Request Sample |
| Drobond™ 551 | D.R. Coats Ink & Resins Pvt. Ltd. | Drobond™ 551 is a Reddish yellow mobile liquid readily decomposed by water to form polymeric titanium compounds. It is supplied as a solution in isopropyl alcohol. | |
| Silane ATPN-171 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-act...view more Silane ATPN-171 is used to modify polyethylene and other polymers by grafting its vinyl group to the polymer backbone using a radical initiator, such as peroxide. This provides a polymer with pendant trimethoxysilyl groups that may be used as moisture-activated crosslinking sites via hydrolysis of the alkoxy groups followed by condensation of the resulting silanols. view less | |
| MOR-GLO™ 2E | Synthomer | Mor-Glo 2E very hard and durable zinc crosslinked polymer provides premium performance in high traffic floor areas. It features excellent black heel mark (BHMR), scuff and dirt resistance. | |
| WorléeCryl® A 1320 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1320 is an acrylic resin which can be crosslinked with polyisocyanate. It is used for high quality wood and furniture lacquers. This product exhibits good initial drying. Also, in top coats a brilliant haze-free gloss will be provided. | |
| SiSiB® PC2710 | SiSiB SILICONES | SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable ureth...view more SiSiB® PC2710 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
| SiSiB® PC2720 | SiSiB SILICONES | SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethan...view more SiSiB® PC2720 is a colorless transparent liquid. It is an isocyanate functional silane. It can be used as a crosslinker for one part moisture curable urethane adhesives, sealants, and coatings; as an adhesion promoter for one part moisture curable urethane systems, two part reactive urethane systems, or silicone sealants or coatings, to enhance adhesion to organic substrates with active hydrogen atoms; can provide good wet adhesion to glass, metal and other inorganic substrates, and can provide good thermal, chemical and UV stable performance. view less | |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...view more Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. view less | Request Sample |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...view more CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. view less | |
| Primid® XL-552 | Estron Chemical, Inc. | Primid® XL-552 is a hydroxyalkylamide crosslinker for the formulation of exterior durable powder coatings. It can be used in combination with carboxyl-terminated polyesters. The constant and high reactivity of Primid® XL-552 combined with a favourable tox...view more Primid® XL-552 is a hydroxyalkylamide crosslinker for the formulation of exterior durable powder coatings. It can be used in combination with carboxyl-terminated polyesters. The constant and high reactivity of Primid® XL-552 combined with a favourable toxicological profile makes this cross-linker the industry standard for exterior durable powder coatings. view less | |
| CYMEL® 247-10 | Allnex | CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable...view more CYMEL 247-10 resin is a partially n-butylated melamine-formaldehyde crosslinking agent characterized by a superior degree of compatibility with most backbone polymers, as implied by its very high hydrocarbon tolerance value. CYMEL 247-10 resin is suitable for industrial baking enamels requiring good flow, high gloss and superior resistance properties. CYMEL 247-10 resin is also useful as a leveling agent in coil coating and metal decoration formulations to improve flow, wetting and gloss. view less | Request Sample |
| SETAMINE® US-144 BB-60 | Allnex | SETAMINE® US-144 resin is a highly reactive, n-butylated high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature improves substrate wetting, flow and leveling, and humidity and salt spray resistance making it suitable for a wide rang...view more SETAMINE® US-144 resin is a highly reactive, n-butylated high imino melamine crosslinker supplied in n-butanol. Its hydrophobic nature improves substrate wetting, flow and leveling, and humidity and salt spray resistance making it suitable for a wide range of applications including automotive topcoats and general industrial finishes. view less | Request Sample |
| TUNGOPHEN® B NV | Allnex | TUNGOPHEN® B NV is a condensation product based on substituted phenols and xylene formaldehyde resin, rosin-free. | Request Sample |
| D-60 | BlueSky Chemical Co., Ltd. | D-60 is a di(1,3-propanediol)-bis(ethylacetoacetate) titanium. This product can be used to crosslink and promote adhesion in silicone sealants, adhesives, binders, and paints. Its density at 25 degrees Celsius lies between 1.05 and 1.1 g/ml. | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...view more Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. view less | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| MACRYNAL® SM 2516/70BAC | Allnex | MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent ...view more MACRYNAL® SM 2516/70BAC is a hydroxy functional acrylic resin crosslinkable with polyisocyanates. It is recommended for air-drying and forced drying two-pack medium high solids systems with high gloss. It offers excellent mechanical properties, excellent chemical resistance and good outdoor stability for automotive refinishes. view less | Request Sample |
| EPS® 572 | EPS Materials | EPS® 572 is a self-crosslinking acrylic copolymer recommended for the formulation of mosaic plasters, enamels for wood, metal and mineral substrates, varnishes and stains. | |
| WorléeCryl® A 2445 (60% In Solvesso 100) | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2445 (60% In Solvesso 100) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is an acrylic copolymer for the manufacture of high quality industrial paints. Pain...view more WorléeCryl® A 2445 (60% In Solvesso 100) is an acrylic resin which can be crosslinked with polyisocyanates. This grade has a non-volatile content of 60% ± 1. W´Cryl A 2445 is an acrylic copolymer for the manufacture of high quality industrial paints. Paints based on this resin show excellent resistance against water, solvents and chemicals. view less | |
| CYMEL® 5010B | Allnex | CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but wit...view more CYMEL 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, CYMEL 5010B resin imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. Because of the limited light resistance properties of benzoguanamine, CYMEL 5010B is not suitable for exterior applications. view less | Request Sample |
| Aldirez BH | Incorez Ltd. | Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where ...view more Aldirez BH is an aldimine latent curing agent that hydrolyses on exposure to moisture, yielding a reactive amine crosslinker. It is specially designed for one component PU systems and is suitable for use with both aromatic and aliphatic prepolymers where it is used to prevent gassing in sealant and adhesive applications. view less | Request Sample |
| Vinyltrimethoxysilane | Dalian Onichem Co., Ltd. | Vinyltrimethoxysilane is a cross-linking agent for PE. This product is used as a moisture scavenger as well as a coupling agent for unsaturated polyesters. | Request Sample |
| Vinyltris-(2-Methoxyethoxy)Silane | Dalian Onichem Co., Ltd. | Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Sil...view more Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primers and coatings. view less | Request Sample |
| Vinyltris(methylehtylketoximino)silane (VOS) | Quzhou Dayixin Chemical Co., Ltd. | Vinyltris(methylehtylketoximino)silane (VOS) is a colorless or light yellow transparent liquid with a 2-butanone oxime odor. This product is used as a gentle silane coupling agent and as a cross-linking agent of silicone sealant. It is also a more active ...view more Vinyltris(methylehtylketoximino)silane (VOS) is a colorless or light yellow transparent liquid with a 2-butanone oxime odor. This product is used as a gentle silane coupling agent and as a cross-linking agent of silicone sealant. It is also a more active methyl curing agent. view less | |
| Phenyltris(methylethylketoximino) silane (POS) | Quzhou Dayixin Chemical Co., Ltd. | Phenyltris(methylethylketoximino) silane (POS) is a colorless or light yellow transparent liquid that can cross-link with water and generate 2-butanone oxime. This product can be used as a cross-linking agent of silicone sealant. | |
| Methyltriacetoxysilane | Quzhou Dayixin Chemical Co., Ltd. | Methyltriacetoxysilane is a colorless or light yellow transparent liquid with a strong acetic acid odor. This product is most commonly used as a cross-linking agent of vulcanized silicone rubber and silicone sealant. | |
| Tetramethyldisiloxane | Ark (Fogang) Chemicals Industry Co., Ltd. | Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics ...view more Tetramethyldisiloxane is a clear and colorless liquid with the chemical structure C4H14OSi2. It is widely used as a silicone intermediate in the production of high performance silicone surfactants, liquid silicone rubber, modified silicone oils, plastics and other resins. view less | |
| AC-76 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-76 is a Vinyltriisopropoxysilane with the chemical formula C11H24O3Si and comes as a clear and colorless liquid. It is primarily used as a monomer in acrylic emulsions in the production of paints and coatings. | |
| Organosilane MTA | Dalian Onichem Co., Ltd. | Organosilane MTA is a colorless to light yellowish liquid which boils at 87°C. This product is mainly used as a cross-linking agent for RTV silicone rubber and acidity silicone sealants. Organosilane MTA will crystallize at lower temperature. | Request Sample |
| Organosilane MTO | Dalian Onichem Co., Ltd. | Organosilane MTO is a colorless to yellowish transparent liquid which boils at 110°C. This product is widely used as a cross-linker/coupling agent for RTV (room temperature vulcanizing) silicone rubber and silicone sealant. | Request Sample |
| D-31 | BlueSky Chemical Co., Ltd. | D-31 is a blend of methyltris (methylethylketoxime) silane and tetrakis (methylethylketoxime) silane. This product is a cross-linking agent for oxime silicone sealants and is also a liquid raw material for neutral condensation curing silicone sealants. | |
| D-32 | BlueSky Chemical Co., Ltd. | D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants...view more D-32 is a blend of methyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a cross-linking agent for RTV oxime silicone sealants. It is also liquid raw material for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.98 g/ml. view less | |
| D-33 | BlueSky Chemical Co., Ltd. | D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0...view more D-33 is a methyltris (methyl ethylketoxime) silane. This product can be used as a cross-linking agent for RTV oxime silicone sealants as well as liquid raw materials for neutral condensation curing silicone sealants. Its density at 25 degrees Celsius is 0.99 g/ml. view less |
