| #1 CASTOR OIL | NCeed Enterprises | #1 Castor Oil is a dodecahydroxyoleic acid that is derived from a castor bean. It is a clear liquid and free of suspended matter. It has many lubricant, plasticizer, and resin applications. | |
| 12-HYDROXY STEARATE ACID (12 HSA) | NCeed Enterprises | This is a saturated hydroxyoleic acid that is used as a complexing agent in lithium-based and calcium-based greases. | |
| 3NG810 | OXEA | 3NG810 is an ester of TMP alcohol and C8C10 acid, and is used as a lubricant in synthetic engine oils. | |
| ALCHISOR 3SP | Sasol Chemicals | ALCHISOR 3SP is the heavy alkylate obtained as by-product in the alkylation of benzene with n-olefins. It is a polyalkylate with high content of dialkybenzene. | Request Sample |
| ALCHISOR DE | Sasol Chemicals | ALCHISOR DE is the heavy alkylate obtained as by-product in the alkylation of benzene with n-olefins. It is a polyalkylate with high content of dialkybenzene. | Request Sample |
| ALFOL 1214GC | Sasol Chemicals | ALFOL Alcohols are high purity, petrochemical-based linear primary alcohol homologs having even-numbered carbon chains. As a result, ALFOL alcohol derivatives are biodegradable, and are physically and chemically equivalent to alcohols made from such oleoc...view more ALFOL Alcohols are high purity, petrochemical-based linear primary alcohol homologs having even-numbered carbon chains. As a result, ALFOL alcohol derivatives are biodegradable, and are physically and chemically equivalent to alcohols made from such oleochemical sources as coconut oil and palm kernel oil. view less | Request Sample |
| BASE 10 SE | Dover Chemical Corporation - Lubricant Additives | BASE 10 SE is a 10% sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 10 SE is suitable for products destined for use in yellow metal applications (will not stain)...view more BASE 10 SE is a 10% sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 10 SE is suitable for products destined for use in yellow metal applications (will not stain). view less | |
| BASE 12 SE | Dover Chemical Corporation - Lubricant Additives | BASE 12 SE is a sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 12 SE contains active sulfur and is NOT suitable for products destined for use in yellow metal ap...view more BASE 12 SE is a sulfurized methyl ester designed to offer both lubricity and extreme pressure properties in oil and water dilutable metalworking fluids. BASE 12 SE contains active sulfur and is NOT suitable for products destined for use in yellow metal applications (will stain). view less | |
| BD 0612 | DRD Additives | BD 0612 is an ester-based lubricity additive that gives antioxidant and corrosion protection performance. It cleans metal surfaces and can be emulsified or used in oil-based formulations. | |
| BD 0908 | DRD Additives | Unique antiwear and friction modification additive that incorporates a nanoparticulate boron species coupled with surface-active esters. Can give EP properties and is compatible with water in emulsions. | |
| BD 1261 | DRD Additives | A mixture of sulfurized natural and synthetic esters. 10.5% S with a copper strip of 1b. EP additive for metalworking fluids. | |
| BD 1648 | DRD Additives | Emulsifier designed for used with ester-based fluids. Emulsifies natural and synthetic esters including but not limited to canola oil, polyol esters, methyl esters, and B100 biodiesel. | |
| BD 1705 | DRD Additives | Pentaerythritol tetraoleate synthetic ester used as a lubricity additive or an environmentally-friendly base oil. Good hydrolytic stability and compatibility with water. | |
| BD 1706 | DRD Additives | PEG-600 oleate ester that functions as a coupler and secondary emulsifier. Enhances stability of concentrates. Compatible with wide range of pH levels. | |
| BD 1707 | DRD Additives | TMP trioleate synthetic ester used as an additive for lubricity or as an environmentally friendly base oil. Outstanding resistance to hydrolysis. | |
| BD 2001 | DRD Additives | Standard PAO (polyalphaolefin) used as a lubricity additive or as a base stock. Has excellent oxidative stability. | |
| BD 6001 | DRD Additives | Unique ester-based lubricity additive. Enhances sound reduction in railroad curve grease. | |
| Caprylic Acid | Chemceed | Caprylic acid is used in the manufacture of lubricants, dyes, pesticides, disinfectants, and perfumes. The natural antimicrobial properties of caprylic acid make it useful as a sanitizer for food contact surfaces and equipment, especially meat processing ...view more Caprylic acid is used in the manufacture of lubricants, dyes, pesticides, disinfectants, and perfumes. The natural antimicrobial properties of caprylic acid make it useful as a sanitizer for food contact surfaces and equipment, especially meat processing plants, breweries & wineries. view less | |
| CHEMAX NDO-250 | PCC Chemax, Inc. | Chemax NDO-250 is a synthetic polymerized ester designed to boost lubricity in severe metalworking applications. | |
| CHEMAX NDO-300 | PCC Chemax, Inc. | Chemax NDO-300 is a polymerized water soluble specialty ester. | |
| CHEMAX NDO-350 | PCC Chemax, Inc. | Chemax NDO-350 is a polymerized water dilutable specialty ester. | |
| DA-8506XS | Dover Chemical Corporation - Lubricant Additives | DA-8506XS is a stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It is a nonflammable, non-corrosive, low volatile liquid at room ...view more DA-8506XS is a stabilized chlorinated fatty ester designed to offer lubricity and wetting characteristics, as well as extreme pressure properties, to the fluids in which it is incorporated. It is a nonflammable, non-corrosive, low volatile liquid at room temperature. DA-8506XS is fortified against corrosion. It is typically applied in straight and soluble oil machining, drawing and stamping fluids when a formulation requires additional wetting, lubricity or EP properties. view less | |
| DAKOLUB® MB 6098 | DAKO AG | DAKOLUB® MB 6098 is a vegetable oleic acid with a content of oleic acid over 90% and a content of polyunsaturated fatty acids below 3%. It is mainly used as a component for the synthesis of esters and emulsifiers, as well as a component for the cosmetic i...view more DAKOLUB® MB 6098 is a vegetable oleic acid with a content of oleic acid over 90% and a content of polyunsaturated fatty acids below 3%. It is mainly used as a component for the synthesis of esters and emulsifiers, as well as a component for the cosmetic industry. Furthermore, DAKOLUB® MB 6098 is not based on genetically modified organisms (GMO). view less | |
| DAKOLUB® MB 70200 | DAKO AG | DAKOLUB® MB 70200 is a specially designed polyglycol ester based on a vegetable fatty acid. Because of this composition the product shows good stability against oxidation and aging. Due to the good emulsifying and lubricating effect DAKOLUB® MB 70200 is s...view more DAKOLUB® MB 70200 is a specially designed polyglycol ester based on a vegetable fatty acid. Because of this composition the product shows good stability against oxidation and aging. Due to the good emulsifying and lubricating effect DAKOLUB® MB 70200 is suitable for the formulation of water-miscible lubricants. view less | |
| DAKOLUB® MB 8500 | DAKO AG | DAKOLUB® MB 8500 is a sunflower oil with a content of oleic acid over 85%. Due to a special refinig process the oil shows a light color and an extremly low acid value. The main use of DAKOLUB® MB 8500 is the formulation of lubricants for high temperature ...view more DAKOLUB® MB 8500 is a sunflower oil with a content of oleic acid over 85%. Due to a special refinig process the oil shows a light color and an extremly low acid value. The main use of DAKOLUB® MB 8500 is the formulation of lubricants for high temperature processes, high shear applications and long durability use. With those applications the product is characterized by its remarkable low viscosity, low tar formation at high temperatures, and high viscosity index. view less | |
| DAKOLUB® MB 9000 | DAKO AG | DAKOLUB® MB 9000 is a crude sunflower oil with a content of oleic acid over 90%. Due to the high stability against oxidation and the excellent stability against aging, lubricants based on DAKOLUB® MB 9000 are suitable for both high temperature and long-te...view more DAKOLUB® MB 9000 is a crude sunflower oil with a content of oleic acid over 90%. Due to the high stability against oxidation and the excellent stability against aging, lubricants based on DAKOLUB® MB 9000 are suitable for both high temperature and long-term applications. Within these applications the product is characterized by its remarkable low viscosity, low tar formation at high temperatures, and high viscosity index. view less | |
| DAKOLUB® MB 9001 | DAKO AG | DAKOLUB® MB 9001 is a specially designed low viscous ester oil, based on a short-chain fatty alcohol and almost pure oleic acid. Therefore, the ester offers an excellent stability against oxidation, low tar formation and a high flash point (compared to mi...view more DAKOLUB® MB 9001 is a specially designed low viscous ester oil, based on a short-chain fatty alcohol and almost pure oleic acid. Therefore, the ester offers an excellent stability against oxidation, low tar formation and a high flash point (compared to mineral oil-based fluids within the same viscosity range). Furthermore, DAKOLUB® MB 9001 provides very good lubricating properties which makes it an ideal base oil for applications with a required low viscosity. view less | |
| DAKOLUB® MB 9010 | DAKO AG | DAKOLUB® MB 9010 is a specially designed ester oil with very low fuming and tarring properties, low viscosity and a very good lubrication effect. DAKOLUB® MB 9010 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear o...view more DAKOLUB® MB 9010 is a specially designed ester oil with very low fuming and tarring properties, low viscosity and a very good lubrication effect. DAKOLUB® MB 9010 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission fluids and metalworking fluids. view less | |
| DAKOLUB® MB 9024 | DAKO AG | DAKOLUB® MB 9024 is a specially designed oil with very low fuming and tarring properties and a very good lubrication effect. DAKOLUB MB 9024 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission flui...view more DAKOLUB® MB 9024 is a specially designed oil with very low fuming and tarring properties and a very good lubrication effect. DAKOLUB MB 9024 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission fluids and metalworking fluids. view less | |
| DAKOLUB® MB 9038 | DAKO AG | DAKOLUB® MB 9038 is a specially designed low temperature ester base-oil with premium lubricating properties and very low tarring. The main use of DAKOLUB® MB 9038 is the formulation of high shear applications, long durability use and applications which re...view more DAKOLUB® MB 9038 is a specially designed low temperature ester base-oil with premium lubricating properties and very low tarring. The main use of DAKOLUB® MB 9038 is the formulation of high shear applications, long durability use and applications which require a long-term cold stability. view less | |
| DAKOLUB® MB 9040 | DAKO AG | DAKOLUB® MB 9040 is a specially designed oil with very low fuming and tarring properties and a very good lubrication effect. DAKOLUB® MB 9040 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission flu...view more DAKOLUB® MB 9040 is a specially designed oil with very low fuming and tarring properties and a very good lubrication effect. DAKOLUB® MB 9040 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission fluids and metalworking fluids. view less | |
| DAKOLUB® MB 90400 | DAKO AG | DAKOLUB® MB 90400 is a specially designed polyglycol ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation and aging, compared to conventional products based on vegetab...view more DAKOLUB® MB 90400 is a specially designed polyglycol ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation and aging, compared to conventional products based on vegetable or animal fats. Due to the good emulsifying and lubricating effect DAKOLUB® MB 90400 is suitable for the formulation of water-miscible lubricants. view less | |
| DAKOLUB® MB 9206 | DAKO AG | DAKOLUB® MB 9206 is a specially designed long-chain ester oil with a chain lengths of approx. 42 carbon atoms per molecule. The combination of a dialcohol with a high oleic acid is providing an oil with very low tarring properties and an extremely good lu...view more DAKOLUB® MB 9206 is a specially designed long-chain ester oil with a chain lengths of approx. 42 carbon atoms per molecule. The combination of a dialcohol with a high oleic acid is providing an oil with very low tarring properties and an extremely good lubrication effect. DAKOLUB® MB 9206 is suitable for the formulation of various kinds of lubricants like hydraulic fluids, gear oils, transmission fluids and metalworking fluids. view less | |
| DAKOLUB® MB 9300 | DAKO AG | DAKOLUB® MB 9300 is a sunflower oil with a content of oleic acid over 90%. Due to a special refinig process the oil shows a light color and an extremly low acid value. The main use of DAKOLUB® MB 9300 is the formulation of lubricants for high temperature ...view more DAKOLUB® MB 9300 is a sunflower oil with a content of oleic acid over 90%. Due to a special refinig process the oil shows a light color and an extremly low acid value. The main use of DAKOLUB® MB 9300 is the formulation of lubricants for high temperature processes, high shear applications and long durability use. view less | |
| DAKOLUB® MB 9380 | DAKO AG | DAKOLUB® MB 9380 is a chemically modified sunflower oil with a very low pourpoint. Due to this composition the oil shows extremely good cold-stability and superior stability against oxidation. The main use of DAKOLUB® MB 9380 is the formulation of lubrica...view more DAKOLUB® MB 9380 is a chemically modified sunflower oil with a very low pourpoint. Due to this composition the oil shows extremely good cold-stability and superior stability against oxidation. The main use of DAKOLUB® MB 9380 is the formulation of lubricants for gear applications, high shear applications, long durability use and applications which require a cold-stability. view less | |
| DAKOLUB® MB 9500 | DAKO AG | DAKOLUB® MB 9500 is a TMP-Trioleate based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation. The main use of DAKOLUB® MB 9500 is the formulation of lubricants for high temperat...view more DAKOLUB® MB 9500 is a TMP-Trioleate based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation. The main use of DAKOLUB® MB 9500 is the formulation of lubricants for high temperature processes, high shear applications, long durability use and applications which require a cold-stability at −30 °C over 7 days. view less | |
| DAKOLUB® MB 9600 | DAKO AG | DAKOLUB® MB 9600 is a NPG-Dioleate based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation. The main use of DAKOLUB® MB 9600 is the formulation of lubricants for high temperatu...view more DAKOLUB® MB 9600 is a NPG-Dioleate based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation. The main use of DAKOLUB® MB 9600 is the formulation of lubricants for high temperature processes, high shear applications, long durability use and applications which require low temperatures, and metalworking fluids. view less | |
| DAKOLUB® MB 9840-150 | DAKO AG | DAKOLUB® MB 9840-150 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 150 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-150 is the formulation of lubrican...view more DAKOLUB® MB 9840-150 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 150 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-150 is the formulation of lubricants for gear applications, high shear applications, long durability use and applications which require a cold-stability at −40 °C over 7 days. view less | |
| DAKOLUB® MB 9840-220 | DAKO AG | DAKOLUB® MB 9840-220 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 220 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-220 is the formulation of lubrican...view more DAKOLUB® MB 9840-220 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 220 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-220 is the formulation of lubricants for gear applications, high shear applications, long durability use and applications which require a cold-stability at −45 °C over 7 days. view less | |
| DAKOLUB® MB 9840-320 | DAKO AG | DAKOLUB® MB 9840-320 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 320 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-320 is the formulation of lubrican...view more DAKOLUB® MB 9840-320 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 320 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-320 is the formulation of lubricants for gear applications, high shear applications, long durability use and applications which require a cold-stability at −50 °C over 7 days. view less | |
| DAKOLUB® MB 9840-68 | DAKO AG | DAKOLUB® MB 9840-68 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 68 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-68 is the formulation of lubricants ...view more DAKOLUB® MB 9840-68 is a viscosity ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the oil of ISO VG 68 shows superior stability against oxidation. The main use of DAKOLUB® MB 9840-68 is the formulation of lubricants for gear applications, high shear applications, long durability use and applications which require a cold-stability at −35 °C over 7 days. view less | |
| DAKOLUB® MB 99400 | DAKO AG | DAKOLUB® MB 99400 is a specially designed polyglycol ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation and aging, compared to conventional products based on vegetab...view more DAKOLUB® MB 99400 is a specially designed polyglycol ester based on a fatty acid content over 90% pure oleic acid. Due to this composition the product shows superior stability against oxidation and aging, compared to conventional products based on vegetable or animal fats. Due to the good emulsifying and lubricating effect DAKOLUB® MB 99400 is suitable for the formulation of water-miscible lubricants. view less | |
| DIBUTYL MALEATE (DBM) | NCeed Enterprises | Chemical name: 2-butendioic dibutylester acid | |
| DIBUTYL SEBACATE (DBS) | NCeed Enterprises | An organic chemical, a dibutyl ester of sebacic acid | |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a dibasic ester that can be used as a base oil for hydraulic oils and compressor oils. DIDA is useful as a sole basestock or can be use in a blend with other base oils such as PAOs. DIDA provides good low temperature propertie...view more Diisodecyl Adipate (DIDA) is a dibasic ester that can be used as a base oil for hydraulic oils and compressor oils. DIDA is useful as a sole basestock or can be use in a blend with other base oils such as PAOs. DIDA provides good low temperature properties as well excellent thermal stablility. view less | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...view more Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. view less | |
| DIMETHYL SEBACATE (DMS) | NCeed Enterprises | Dimethyl Sebacate is a synthetic base stock that can be substituted for mineral oils to have a higher eco-friendly application. It has improved workability and low temperature properties that give it excellent applications in trucks, automobiles, and airc...view more Dimethyl Sebacate is a synthetic base stock that can be substituted for mineral oils to have a higher eco-friendly application. It has improved workability and low temperature properties that give it excellent applications in trucks, automobiles, and aircraft that are exposed to arctic conditions. view less | |
| DIOCTYL MALEATE (DOM) | NCeed Enterprises | Dioctyl Maleate (DOM) is a maleate ester that is a clear liquid. It has lubricant applications. | |
| DIOCTYL SEBACATE (DOS) | NCeed Enterprises | Dioctyl Sebacate (DOS) is a lithium hydroxystearate complex grease that can utilize sebacic acid. It has functional value in low temperature applications and can be used to replace sodium nitrites in aluminum greases. Applications include aircraft, trucks...view more Dioctyl Sebacate (DOS) is a lithium hydroxystearate complex grease that can utilize sebacic acid. It has functional value in low temperature applications and can be used to replace sodium nitrites in aluminum greases. Applications include aircraft, trucks, automobiles, and equipment in arctic conditions. view less | |
| DISODIUM SEBACATE (DSS) | NCeed Enterprises | This material passes through a 140 mesh screen. | |
| DTDA | OXEA | DTDA is an ester of i-C13 alcohol and adipic acid. This product is used as specialty plasticizer and as lubricant. | |
| Durasyn® 125 | INEOS Oligomers | Durasyn® 125 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 126 | INEOS Oligomers | Durasyn® 126 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 127 | INEOS Oligomers | Durasyn® 127 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 128 | INEOS Oligomers | Durasyn® 128 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 145 | INEOS Oligomers | Durasyn® 145 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 146 | INEOS Oligomers | Durasyn® 146 polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from C12 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and en...view more Durasyn® 146 polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from C12 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high or wide temperature range conditions. view less | |
| Durasyn® 147 | INEOS Oligomers | Durasyn® 147 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 148 | INEOS Oligomers | Durasyn® 148 is a fully synthesized polyalphaolefin (PAO) base fluid which provides improved volatility, and thermal and oxidative stability performance. | |
| Durasyn® 162 | INEOS Oligomers | Durasyn® 162 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 164 | INEOS Oligomers | Durasyn® 164 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 166 | INEOS Oligomers | Durasyn® 166 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 166X | INEOS Oligomers | Durasyn® 166X polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhan...view more Durasyn® 166X polyalphaolefin (PAO) is a fully synthesized distilled and hydrogenated hydrocarbon base fluid produced from linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high or wide temperature range conditions. view less | |
| Durasyn® 168 | INEOS Oligomers | Durasyn® 168 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 170 | INEOS Oligomers | Durasyn® 170 polyalphaolefin (PAO) is a hydrogenated synthetic hydrocarbon base fluid for use in fully and partially synthetic, premium, long-drain lubricating oils, industrial oils, hydraulic fluids, transmission fluids, or heat transfer fluids. | |
| Durasyn® 174 I | INEOS Oligomers | Durasyn® 174 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life...view more Durasyn® 174 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| Durasyn® 180 I | INEOS Oligomers | Durasyn® 180 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life...view more Durasyn® 180 I high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| Durasyn® 180 R | INEOS Oligomers | Durasyn® 180 R high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life...view more Durasyn® 180 R high viscosity polyalphaolefin (PAO) is a fully synthesized and hydrogenated hydrocarbon base fluid produced from C10 linear alphaolefin feed stocks. Its engineered physical and performance properties are designed to extend the service life and enhance the performance of fully formulated lubricants operating under continuous low, high, or wide temperature range conditions. view less | |
| EM 706 | Dover Chemical Corporation - Lubricant Additives | EM 706 is a phosphate ester that brings lubricity and anti-wear properties to metalworking fluids. It may be formulated into straight oils and water extendable fluids. This product may help prevent the staining of nonferrous metals in some applications. E...view more EM 706 is a phosphate ester that brings lubricity and anti-wear properties to metalworking fluids. It may be formulated into straight oils and water extendable fluids. This product may help prevent the staining of nonferrous metals in some applications. EM 706 may be formulated into straight oils, water dilutable soluble oils, and semi-synthetic coolants. view less | |
| EMULDAC AS-25 | Sasol Chemicals | EMULDAC AS-25 is a fatty alcohol polyethylenglycol ether, based on NAFOL 16-18 and ethylene oxide (30 moles). | Request Sample |
| EMULGANTE EL-65 | Sasol Chemicals | EMULGANTE EL-65 is a castor oil polyethylenglycol ether (38 moles). | Request Sample |
| GEOlube® 43 A 1000 | GEO Specialty Chemicals | GEOlube® 43 A 1000 is a water soluble lubricant base fluid suitable for a range of industrial lubricant applications and may be used as a direct replacement to GEOlube® 50 A 1000 in all such application areas. It offers excellent resistance to weight loss...view more GEOlube® 43 A 1000 is a water soluble lubricant base fluid suitable for a range of industrial lubricant applications and may be used as a direct replacement to GEOlube® 50 A 1000 in all such application areas. It offers excellent resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions and high shear, very high viscosity index, good water solubility at temperatures below 48°C. view less | |
| GEOlube® AIR 32 | GEO Specialty Chemicals | GEOlube® AIR 32 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attribu...view more GEOlube® AIR 32 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attributes of both classes of compound. In addition, due to the inherently high viscosity index of this lubricants, no additional VI improvers are required in the formulation and so the products remain stable to shear forces and do not suffer any irreversible effects. view less | |
| GEOlube® AIR 46 | GEO Specialty Chemicals | GEOlube® AIR 46 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attribu...view more GEOlube® AIR 46 is a compressor lubricant specifically designed for use in rotary screw air compressors. It is a fully formulated, fully synthetic blend of polyalkylene glycol and polyol ester, and thus takes advantage of the excellent performance attributes of both classes of compound. In addition, due to the inherently high viscosity index of this lubricants, no additional VI improvers are required in the formulation and so the products remain stable to shear forces and do not suffer any irreversible effects. view less | |
| GEOlube® BCF 11 | GEO Specialty Chemicals | GEOlube® BCF 11 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will cor...view more GEOlube® BCF 11 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corrode and deteriorate if stored in humid conditions; to prevent this occurrence, GEOlube® BCFs provide a protective film of excellent durability. In addition to excellent humid corrosion protection, brake coating fluids need to comply with some viscosity and rubber swelling requirements, when used as an assembly fluid or as a testing fluid. view less | |
| GEOlube® BCF 7 | GEO Specialty Chemicals | GEOlube® BCF 7 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corr...view more GEOlube® BCF 7 (Brake Coating Fluid) is a high quality synthetic product formulated from high molecular weight polyalkene glycols, anti-oxidant and anti-rust additives, for the prevention of corrosion to brake components. Brake system components will corrode and deteriorate if stored in humid conditions; to prevent this occurrence, GEOlube® BCFs provide a protective film of excellent durability. In addition to excellent humid corrosion protection, brake coating fluids need to comply with some viscosity and rubber swelling requirements, when used as an assembly fluid or as a testing fluid. view less | |
| GEOlube® CL 1400 | GEO Specialty Chemicals | GEOlube® CL 1400 is a polyalkylene glycol (PAG) lubricant, and is a well recognised standard in the industry. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or was...view more GEOlube® CL 1400 is a polyalkylene glycol (PAG) lubricant, and is a well recognised standard in the industry. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load carrying and lubricant performance, and relatively flat pressure-viscosity characteristics. view less | |
| GEOlube® CL 1400 S | GEO Specialty Chemicals | GEOlube® CL 1400 S is a polyalkylene glycol (PAG) lubricant. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load ...view more GEOlube® CL 1400 S is a polyalkylene glycol (PAG) lubricant. PAGs offer advantages over other types of lubricants, including minimal viscosity reduction, less likelihood that the lubricant is removed or washed form the plunger running zone, superior load carrying and lubricant performance, and relatively flat pressure-viscosity characteristics. GEOlube® CL 1400 S is recommended for co-polymers of ethylene and vinyl acetate (VAM) containing up to 15% vinyl acetate. view less | |
| GEOlube® FGL 1000 | GEO Specialty Chemicals | GEOlube® FGL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-...view more GEOlube® FGL 1000 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 1000 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® FGL 150 | GEO Specialty Chemicals | GEOlube® FGL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 R...view more GEOlube® FGL 150 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 150cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® FGL 220 | GEO Specialty Chemicals | GEOlube® FGL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...view more GEOlube® FGL 220 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 227 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® FGL 320 | GEO Specialty Chemicals | GEOlube® FGL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...view more GEOlube® FGL 320 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 339 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® FGL 460 | GEO Specialty Chemicals | GEOlube® FGL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...view more GEOlube® FGL 460 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 477 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® FGL 680 | GEO Specialty Chemicals | GEOlube® FGL 680 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 725 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 ...view more GEOlube® FGL 680 is an ISO VG lubricant formulated to provide the user with superior performance under demanding operating conditions, and manufactured to provide a viscosity of 725 cSt @ 40°C. The GEOlube® FGL range is formulated to achieve USDA/NSF H-1 Registration. Water soluble polyalkene glycol base stocks, known to provide outstanding micropitting and EP characteristics are used to manufacture these lubricants. With the addition of a high performance additive package, these products are able to offer excellent thermal stability, high wear reduction rates, high micropitting resistance and load carrying ability, as well as good corrosion protection. view less | |
| GEOlube® HTF 14 | GEO Specialty Chemicals | GEOlube® Heat Transfer Fluid (HTF) 14 is a fluid based on a modified polyalkylene glycol to ensure optimum performance in heat transfer applications. Inside the system, GEOlube® HTF 14 acts as a solvent for its own decomposition products, thereby preventi...view more GEOlube® Heat Transfer Fluid (HTF) 14 is a fluid based on a modified polyalkylene glycol to ensure optimum performance in heat transfer applications. Inside the system, GEOlube® HTF 14 acts as a solvent for its own decomposition products, thereby preventing the deposition of sludge or gums. view less | |
| GEOlube® Hydrolube NF46 2180 | GEO Specialty Chemicals | GEOlube® Hydrolube NF46 2180 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in di...view more GEOlube® Hydrolube NF46 2180 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in die casting machines, hydraulic forging press and hammers, machines and drive systems in the mining industry and robot welding machines. With a typical water content of 36%, this product is particularly designed for use in the metallurgic industry, where its excellent lubricity characteristics are beneficial in the heaviest operations (for example in die or continuous casting). view less | |
| GEOlube® Hydrolube NF46 2181 | GEO Specialty Chemicals | GEOlube® Hydrolube NF46 2181 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in di...view more GEOlube® Hydrolube NF46 2181 is a fire resistant, water glycol (HF-C) based hydraulic fluid. Its use as a replacement for mineral oil fluids is recommended whenever a major fire hazard exists associated with industrial hydraulic systems, for example in die casting machines, hydraulic forging press and hammers, machines and drive systems in the mining industry and robot welding machines. With a typical water content of 43%, this product is particularly recommended for use in coal mining, where the higher water content provides an extra safety margin. view less | |
| GEOlube® IL 1007 | GEO Specialty Chemicals | GEOlube® IL 1007 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 680 viscosity. Compared to some conventional polyalkylene glycols, this product exhibits resistance to wei...view more GEOlube® IL 1007 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 680 viscosity. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. view less | |
| GEOlube® IL 307 | GEO Specialty Chemicals | GEOlube® IL 307 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 220 viscosity and may be blended with GEOlube® IL 807 to create an ISO VG 320 fluid. Compared to some conve...view more GEOlube® IL 307 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 220 viscosity and may be blended with GEOlube® IL 807 to create an ISO VG 320 fluid. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. view less | |
| GEOlube® IL 807 | GEO Specialty Chemicals | GEOlube® IL 807 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 460 viscosity and may be blended with GEOlube® IL 307 to create an ISO VG 320 fluid. Compared to some conve...view more GEOlube® IL 807 is a water insoluble polyalkylene glycol lubricant base fluid suitable for gear, calender and marine applications. It has an ISO VG 460 viscosity and may be blended with GEOlube® IL 307 to create an ISO VG 320 fluid. Compared to some conventional polyalkylene glycols, this product exhibits resistance to weight loss under oxidising conditioners, with minimal residue formation on oxidation, excellent resistance to loss of viscosity under oxidising conditions, minimal residue formation, and inhibition of the formation of a stable emulsion with water. view less | |
| GEOlube® IL150SW | GEO Specialty Chemicals | GEOlube® IL150SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...view more GEOlube® IL150SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 150 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. view less | |
| GEOlube® IL220SW | GEO Specialty Chemicals | GEOlube® IL220SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...view more GEOlube® IL220SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 237 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. view less | |
| GEOlube® IL320SW | GEO Specialty Chemicals | GEOlube® IL320SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...view more GEOlube® IL320SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 325 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. view less | |
| GEOlube® IL460SW | GEO Specialty Chemicals | GEOlube® IL460SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...view more GEOlube® IL460SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 433 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. view less | |
| GEOlube® IL680SW | GEO Specialty Chemicals | GEOlube® IL680SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibili...view more GEOlube® IL680SW is a Polyalkylene Glycol based synthetic lubricant, which offers outstanding load carrying properties and excellent thermal stability. It was designed to provide excellent corrosion protection (ASTM D665, procedure B pass) and demulsibility characteristics (according to ASTM D1401). This product is manufactured to provide a viscosity of 660 cSt @ 40°C, and is typically used for the lubrication of calenders and piston compressors, as well as the lubrication of bevel, spiral bevel, helical, enclosed spur, and worm gear units. view less | |
| GEOlube® LPG 9 | GEO Specialty Chemicals | GEOlube® Compressor Lube LPG 9 is a high performance gas compressor lubricant based on a polyalkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled a...view more GEOlube® Compressor Lube LPG 9 is a high performance gas compressor lubricant based on a polyalkylene glycol. It is designed for enclosed pattern gas compressors for hydrocarbon and chemical gases where the crankcase and bearings operate in a gas-filled atmosphere. Under these conditions, the gas is readily soluble in mineral oil lubricants, which, on dilution, suffer a significant drop in viscosity (see Figure 1) and lubricant performance. This problem can be overcome by using GEOlube® LPG 9, in which the gases are much less soluble. GEOlube® LPG 9 is particularly suitable for marine service on vessels carrying specialist liquefied gas cargoes. view less | |
| GEOlube® MAC 100 | GEO Specialty Chemicals | GEOlube® MAC 100 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 97.6 cSt @ 40°C. GEOlube® MAC gra...view more GEOlube® MAC 100 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 97.6 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. view less | |
| GEOlube® MAC 150 | GEO Specialty Chemicals | GEOlube® MAC 150 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 145.2 cSt @ 40°C. GEOlube® MAC gr...view more GEOlube® MAC 150 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 145.2 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. view less | |
| GEOlube® MAC 46 | GEO Specialty Chemicals | GEOlube® MAC 46 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 42 cSt @ 40°C. GEOlube® MAC grades...view more GEOlube® MAC 46 is a fully formulated ISO grade polyalkylene lubricant designed specifically for application with R-134a in mobile A/C systems or in A/C systems where the compressor requires a lubricant with viscosity of 42 cSt @ 40°C. GEOlube® MAC grades are suitable for applications where older vehicles using the R-12/mineral oil combination are being retrofitted from CFC R-12 to HFC R-134a. They demonstrate excellent solubility with R-12, are stable with residual levels of R-12 and are also miscible and stable with residual levels of mineral oil. view less | |
| GLICERODAC WS 180 VG | Sasol Chemicals | GLICERODAC WS 180 VG is a water-soluble polyalkylene glycol for use in synthetic metalworking fluids. Low foam profiles in soft and hard water surroundings together with good additive package compatibility makes this product suitable for multi-purpose flu...view more GLICERODAC WS 180 VG is a water-soluble polyalkylene glycol for use in synthetic metalworking fluids. Low foam profiles in soft and hard water surroundings together with good additive package compatibility makes this product suitable for multi-purpose fluids and lubes. view less | Request Sample |
