| 1,4-Cyclohexanedimethanol (CHDM) | Suny Chem | 1,4-Cyclohexanedimethanol (CHDM) is miscible with water and alcohol, soluble in ketone, and insoluble in ether and aliphatic hydrocarbon. It is both hard and flexible, with high TG, and offers excellent heat stability, good solubility, and good weather re...view more 1,4-Cyclohexanedimethanol (CHDM) is miscible with water and alcohol, soluble in ketone, and insoluble in ether and aliphatic hydrocarbon. It is both hard and flexible, with high TG, and offers excellent heat stability, good solubility, and good weather resistance. This product is mainly used in polyesters, such as polyester fibers, and unsaturated polyester resins like PETG, PCT, PCTG, PCTA, and more. It can enhance the reactivity in polyester compounds, and improve the hydrolytic stability, plasticity, gloss, transparency, printability, and processing ability of the polymer. CHDM can also be used in powder coating applications, which could enhance low temperature resistance and weather resistance of coatings, and improve the gloss of the coating surface. view less | |
| ACURE™ 510-400 | Allnex | ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionali...view more ACURE™ 510-400 is a low molecular weight, acetoacetate functional resin which when used in ACURE™, non-isocyanate, systems in place of other kinetic additives, increases the water and humidity resistance of ACURE™ paint films. The acetoacetate functionality allows this reactive diluent to crosslink and react in to the polymer network and is used as a modifying donor resin in ACURE™ systems. view less | Request Sample |
| Bisomer® BZMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This...view more Bisomer® BZMA (Benzyl Methacrylate) is low viscosity mono-functional monomer suitable for a wide range of applications. It is low viscosity and hydrophobic, and is particularly suitable as a reactive diluent in adhesives, sealants, inks and coatings. This product has a methoxyhydroquinone content of 50 ± 5ppm, an acid number of < 0.02mg KOH/g, and a refractive index @ 20°C of 1.51. It can be used as a co-monomer in PMMA based acrylic formulations to increase the impact resistance, hydrophobicity and structural integrity of resins, composites and coatings. It is also particularly useful as a replacement for styrene in unsaturated polyester and vinyl ester resins used in a wide range of applications including chemical fixings and composites. Due to its high refractive index, Bisomer® BZMA is also suitable for cast lenses, optical fibres, transparent laminates and other applications where clarity is a key requirement. view less | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| DPGDA | Allnex | DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with g...view more DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance. view less | Request Sample |
| EBECRYL® 110 | Allnex | EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for E...view more EBECRYL® 110 is a monofunctional reactive diluent characterized by low viscosity and relatively low odor. It is used in ultraviolet light (UV) or electron beam (EB) cured coatings to control viscosity and increase flexibility. Suggested applications for EBECRYL® 110 include: coatings and screen inks on flexible and semi-rigid plastics including polyolefins, optical fiber coatings, and high refractive index coatings. view less | Request Sample |
| EBECRYL® 113 | Allnex | EBECRYL® 113 is a low odour aliphatic monofunctional diluting acrylate. It is recommended for use in ultraviolet light (UV) or electron beam (EB) curable coatings to increase flexibility and improve adhesion to plastics. | Request Sample |
| EBECRYL® 130 | Allnex | EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties o...view more EBECRYL® 130 is a cyclic aliphatic diacrylate useful as a reactive diluent in UV (ultra violet) or EB (electron beam) curable coatings and inks. It can impart a combination of hardness, toughness, and resiliency coupled with improved adhesion properties on various substrates. It is recommended for use in: scratch and abrasion resistant coatings, coatings requiring increased thermal resistance, and inkjet inks. view less | Request Sample |
| EBECRYL® 140 | Allnex | EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnish...view more EBECRYL® 140 is a reactive diluent that is compatible with a wide range of acrylated resins used in UV/EB curing applications. Effective levels of EBECRYL® 140 typically range from 10% to 30%, depending on the application. In lithographic inks and varnishes it is quite effective in adjusting viscosity while maintaining or improving cure response and physical properties. view less | Request Sample |
| EBECRYL® 160 | Allnex | EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and tou...view more EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists. view less | Request Sample |
| EBECRYL® 7100 | Allnex | EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an acceleratin...view more EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. benzophenone), EBECRYL® 7100 has an accelerating effect on the UV cure speed. It is recommended for: coatings for paper and plastics, overprint varnishes, screen inks, and wood topcoats. view less | Request Sample |
| EBECRYL® 7110 | Allnex | EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rap...view more EBECRYL® 7110 is an acrylated amine primarily used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. benzophenone), EBECRYL® 7110 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. Unlike conventional tertiary amines such as N-methyldiethanolamine, this product reacts to become part of the UV cured polymer, resulting in lower residual odor and improved moisture resistance. It also promotes adhesion to plastic substrates and lowers viscosity when used as a primary component in UV adhesives and coatings. view less | Request Sample |
| EBECRYL® 780 | Allnex | EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially su...view more EBECRYL® 780 is a highly functional, carboxylic acid containing methacrylate oligomer diluted in 2-methoxy-1-propanol solvent. EBECRYL® 780 exhibits good cure speed, good gloss characteristics, low shrinkage and good adhesion to metal. It is especially suitable for use in the topcoat of vacuum metallized cosmetic and filmic applications. view less | Request Sample |
| EBECRYL® 853 | Allnex | Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains...view more Ebecryl® 853 is a trifunctional low viscous diluting acrylate giving low odour after UV or EB curing and low extractables It is compatible with a wide range of acrylated resins.\r\nEbecryl®853 was designed to produce low irritant formulations and contains less than 0.1 % TMPTA. view less | Request Sample |
| EPODIL® 742 | Evonik Operations GmbH, BL Crosslinkers | An epoxy resin system modifier. | Request Sample |
| EPODIL® 759 Reactive Diluent | Evonik Operations GmbH, BL Crosslinkers | EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain terminati...view more EPODIL® 759 Reactive Diluent is an aliphatic glycidyl ether (C12– C13). The product is a monofunctional reactive diluent used to reduce the viscosity of epoxy resin systems. Since monofunctional diluents, in general, cause molecular weight chain termination, the minimum amount necessary to achieve the desired viscosity reduction should be used. view less | Request Sample |
| HDDA | Allnex | HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, w...view more HDDA (Hexanediol diacrylate) is a difunctional reactive diluent that is commonly used as a component of ultraviolet light (UV) and electron beam (EB) curable coatings and inks. HDDA is particularly useful in coatings and inks where improved elasticity, weathering and adhesion are desired in combination with excellent water resistance. view less | Request Sample |
| Liquid NVC | BASF SE, Intermediates Division | Liquid NVC is a reactive diluent for radiation curing coating and inks. It is liquid at room temperature, has high cure speed, excellent viscosity reduction, excellent substrate wetting, and improves adhesion. | |
| OTA 480 | Allnex | OTA-480 is a triacrylated reactive diluent based on a glycerol derivative. It exhibits low viscosity and good flexibility for a triacrylate and its high functionality contributes to good reactivity and hardness. | Request Sample |
| SETAL® 26-3705 | Allnex | SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-iso...view more SETAL® 26-3705 is a low viscosity acetoacetate - modified polyester with excellent compatibility with a variety of industrial resin systems. Because of the acetoacetate functionality, this reactive diluent is crosslinkable with aminoplast resins, poly-isocyanates, polyamines, poly-ketimines and unsaturated polyesters or acrylics. SETAL® 26-3705 was developed for the next generation of non-isocyanate two component primer systems. When reacted with SETAL® 26-3701 and SETAL®UX 10-1440, this system provides much faster dry versus a standard two-component isocyanateprimer system without the negative health and safety issues associated with isocyanates. view less | Request Sample |
| TMPEOTA | Allnex | TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while ma...view more TMPEOTA (Trimethylolpropane ethoxy triacrylate) is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. TMPEOTA can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, TMPEOTA exhibits the highest reactivity and the greatest viscosity reduction of oligomers. view less | Request Sample |
| TMPTA | Allnex | TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effe...view more TMPTA (TRIMETHYLOLPROPANE TRIACRYLATE) is a widely used reactive diluent in ultraviolet light (UV) and electron beam (EB) curable coatings and inks. It imparts crosslinking to the cured polymer providing hardness and chemical resistance. It is a cost effective diluent compatible with the wide range of acrylated resins used in radiation curing applications. view less | Request Sample |
| Triethyleneglycol di vinyl ether, DVE-3 | BASF SE, Intermediates Division | Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based se...view more Triethylenglycol divinyl ether is a reactive diluent for unsaturated polyesters, UV coatings, UV inks, UV adhesives and release coatings. It is a crosslinker for Polyacrylate polymers used as ion exchange resins. It is a building block for sulfur based sealant compounds. Triethylenglycol divinyl ether performs low viscosity in UV-coatings, especially in cationic polymerization. No labeling, no risk phrase. Triethylenglycol divinyl ether is used for UV-coatings (wood, printing inks) and UV adhesives. view less |
