Actigum™ VSX 20 texturizer | Cargill Agricola S/A |
|
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional b...view more
Actigum™ VSX 20 texturizer is a rheology modifier that builds over the well-known properties of two highly safe and nature-derived ingredients: Scleroglucan and Xanthan Gum. The combination of those 2 nature-derived polymers provides enhanced functional benefits such as a high yield value resulting in good suspending properties, and a higher viscosity than what can be obtained with the individual ingredients at the same dosage. This product is recommended for skin care, sun care, toiletries, and hair care products. view less
Compliance Highlights Available
|
|
BASIS LP-20H | Ikeda Corporation |
BASIS LP-20H is a lecithin from soya. It is stable to oxidation. This product is recommended for skin lotions, creams, and lip creams.
Compliance Highlights Available
|
||
BASIS LP-60HR | Ikeda Corporation |
BASIS LP-60HR is a lecithin from soya. It has a high PC content (around 70%). This product is recommended for skin lotions, creams, and lip creams.
Compliance Highlights Available
|
||
COSMOL™ 13 | Ikeda Corporation |
|
COSMOL™ 13 is an α- hydroxyl acid ester. It leaves a rich skin feel. This product is a low viscosity oil with high polarity. It is recommended for skin creams, lipsticks, and foundations.
Compliance Highlights Available
|
|
COSMOL™ 168ARV | Ikeda Corporation |
|
COSMOL™ 168ARV is a fatty acid ester which mainly consists of Dipentaerythritol and mixed fatty acids. It is used as a substitute for Lanolin, and has good water-holding capacity. This product is recommended for lipsticks, hair treatments, hair conditione...view more
COSMOL™ 168ARV is a fatty acid ester which mainly consists of Dipentaerythritol and mixed fatty acids. It is used as a substitute for Lanolin, and has good water-holding capacity. This product is recommended for lipsticks, hair treatments, hair conditioners, and creams. view less
Compliance Highlights Available
|
|
COSMOL™ 168EV | Ikeda Corporation |
|
COSMOL™ 168EV is a substitute for Lanolin. It is especially recommended for lipsticks, creams, and skin lotions.
Compliance Highlights Available
|
|
COSMOL™ 168M | Ikeda Corporation |
|
COSMOL™ 168M is a substitute for Lanolin. It is supplied as a yellow or pale brown, nearly odorless material. This product is recommended for lipsticks, creams, and skin lotions.
Compliance Highlights Available
|
|
COSMOL™ 182V | Ikeda Corporation |
|
COSMOL™ 182V is a nonionic emulsifier. It is derived from raw materials which are all of vegetable origin. This product is recommended for foundations, W/O creams, and sun care products.
Compliance Highlights Available
|
|
COSMOL™ 222 | Ikeda Corporation |
COSMOL™ 222 is a substitute for castor oil. It finds widespread use as a pigment dispersant, binder in pressed powders and as a rich emollient in creams, lotions and hair care products.
Compliance Highlights Available
|
||
COSMOL™ 41V | Ikeda Corporation |
COSMOL™ 41V is a nonionic emulsifier. It is composed of raw materials of vegetable origin. This product is recommended for W/O creams, hair care products, and cleansers.
Compliance Highlights Available
|
||
COSMOL™ 42V | Ikeda Corporation |
COSMOL™ 42V is a nonionic emulsifier. It is composed of raw materials which are all of vegetable origin. This product is recommended for liquid makeup products, and W/O creams.
Compliance Highlights Available
|
||
COSMOL 43N | Ikeda Corporation |
Highly methyl-branched isostearic acid ester. High glossiness. Recommended for lip glosses, creams.
Compliance Highlights Available
|
||
COSMOL 43V | Ikeda Corporation |
Excellent dispersing agent for pigments. All raw materials are vegetable origin. Recommended for lipsticks, foundations and creams.
Compliance Highlights Available
|
||
COSMOL 44V | Ikeda Corporation |
High molecular weight and stable ester. Leave a rich feel. All raw materials are vegetable-origin. Recommended for foundations, skin care products.
Compliance Highlights Available
|
||
COSMOL 525 | Ikeda Corporation |
Light emollient ester. Recommended for pressed powders, hair sprays.
Compliance Highlights Available
|
||
COSMOL 82 | Ikeda Corporation |
Nonionic emulsifier. All raw materials are vegetable-origin. It contains tocopherol approx. 100ppm. Recommended for foundations, W/O creams.
Compliance Highlights Available
|
||
ESTEMOL N-01 | Ikeda Corporation |
ESTEMOL N-01 is a light and safe emollient ester. It is recommended for skin creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
NOMCORT® ZZ | Ikeda Corporation |
NOMCORT® ZZ is a higher viscosity and higher yield point than standard Xanthan gum. It is ideal for transparent formulations. This product is recommended for lotions and serums.
Compliance Highlights Available
|
||
NOMCORT® AG | Ikeda Corporation |
|
NOMCORT® AG is a water-soluble polymer. It is easy to prepare surfactant-free emulsions with several kinds of oil, including high polar esters and insoluble combination of oils. This product is recommended for milk lotions, cleansing gel, and sunscreen lo...view more
NOMCORT® AG is a water-soluble polymer. It is easy to prepare surfactant-free emulsions with several kinds of oil, including high polar esters and insoluble combination of oils. This product is recommended for milk lotions, cleansing gel, and sunscreen lotion. view less
Compliance Highlights Available
|
|
NOMCORT® CG | Ikeda Corporation |
|
NOMCORT® CG is a water-soluble polymer. It is easy to make transparent elastic gel. This product is recommended for lotions, serums, aroma gels, and point makeup products.
Compliance Highlights Available
|
|
NOMCORT® HK-G | Ikeda Corporation |
|
NOMCORT® HK-G is an oil gelling agent. It can be used as a thickener and a stabilizer for W/O preparations. This product is recommended for W/O creams, liquid foundations, and cleansers.
Compliance Highlights Unavailable
|
|
NOMCORT® HK-P | Ikeda Corporation |
NOMCORT® HK-P is a glycol gelling agent. It can be used as a thickener and a stabilizer for O/W preparations. This product is recommended for O/W creams and cleansers.
Compliance Highlights Available
|
||
NOMCORT® HP-30 | Ikeda Corporation |
NOMCORT® HP-30 is a non-polar oil with a main content of C40. It contains dl-α-tocopherol approx. 50ppm. This product is recommended for lipsticks, lip glosses, creams, lotions, and foundations.
Compliance Highlights Available
|
||
NOMCORT® HR-822 | Ikeda Corporation |
NOMCORT® HR-822 is a high refractive index ester with luster inproving effect. It is suitable for improving texture and strength for lipsticks. This product is recommended for lipsticks.
Compliance Highlights Available
|
||
NOMCORT® LAH | Ikeda Corporation |
NOMCORT® LAH has good water-holding capacity and is stable to oxidation. This product is recommended for skin creams, lotions, hair treatments, hair conditioners.
Compliance Highlights Available
|
||
NOMCORT® SG | Ikeda Corporation |
|
NOMCORT® SG is an oil gelling agent (soft gel). It is a thickener and a stabilizer for W/O preparations. This product is recommended for W/O creams, liquid foundations, and cleansers.
Compliance Highlights Available
|
|
NOMCORT® TAB | Ikeda Corporation |
NOMCORT® TAB is UV-B absorbent and high purity because of special refinement. It contains d-δ-tocopherol (200~600ppm). This product is recommended for sun care products, foundations, and lip creams.
Compliance Highlights Available
|
||
NOMCORT® T.I.O. | Ikeda Corporation |
NOMCORT® T.I.O. is a highly refined, extremely stable multi-functional emollient ester. This product is recommended for almost all cosmetics.
Compliance Highlights Available
|
||
NOMCORT® TQ-5 | Ikeda Corporation |
NOMCORT® TQ-5 is an excellent dispersing agent for pigments. It contains tocopherol at approximately 200ppm. All raw materials are vegetable-origin. This product is recommended for lipsticks, foundations, and W/O/W emulsions.
Compliance Highlights Available
|
||
NOMCORT® Z | Ikeda Corporation |
NOMCORT® Z has a higher viscosity and higher yield point than standard Xanthan gum. It is recommended for lotions and serums.
Compliance Highlights Available
|
||
O.D.O. | Ikeda Corporation |
|
O.D.O. is a medium-chain triglyceride with a non-greasy feel. It is an excellent solvent, and all raw materials are of vegetable origin. This product is recommended for lipsticks and oil based facial cleansers.
Compliance Highlights Available
|
|
SALACOS® 121 | Ikeda Corporation |
SALACOS® 121 is a high melting point monoglyceride. All raw materials are of vegetable origin. This product is especially recommended for creams.
Compliance Highlights Available
|
||
SALACOS® 3318 | Ikeda Corporation |
SALACOS® 3318 is a highly methyl-branched isostearic acid ester. It offers high glossiness. This product is recommended for lipsticks and lip glosses.
Compliance Highlights Available
|
||
SALACOS® 334 | Ikeda Corporation |
SALACOS® 334 is an emollient wax with melting point 38~42℃. All raw materials are of vegetable origin. This product is recommended for lipsticks, foundations, and hair treatments.
Compliance Highlights Available
|
||
SALACOS® 5408 | Ikeda Corporation |
SALACOS® 5408 is a high molecular weight and extremely stable ester. When used in personal care products, it leaves a rich feeling. This product is recommended for skin creams, lotions, hair care products, and lipsticks.
Compliance Highlights Available
|
||
SALACOS® 5418V | Ikeda Corporation |
SALACOS® 5418V is a high molecular weight and stable ester. It leaves a rich feel in personal care products. This ester is recommended for lip glosses, skin care products.
Compliance Highlights Available
|
||
SALACOS® 6318V | Ikeda Corporation |
SALACOS® 6318V is a slow spreading emollient. It contains tocopherol at approximately 200ppm. This product is recommended for foundations and massage oils.
Compliance Highlights Available
|
||
SALACOS® 816T | Ikeda Corporation |
SALACOS® 816T is a non-oily emollient ester. This product is recommended for skin creams, suntan lotions, and oil based facial cleansers.
Compliance Highlights Available
|
||
SALACOS® 913 | Ikeda Corporation |
SALACOS® 913 is a non-oily, nearly dry emollient. It is a silicone oil solubilizer. This product is recommended for oil based facial cleansers, light creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
SALACOS® 99 | Ikeda Corporation |
SALACOS® 99 is a dry and silky touch emollient. This product is recommended for light creams, lotions, bath oils, liquid foundations, and oil based facial cleansers.
Compliance Highlights Available
|
||
SALACOS® DG-158 | Ikeda Corporation |
|
SALACOS® DG-158 is a nonionic emulsifier with HLB of 8. It contains tocopherol at approximately 100ppm. This product is recommended for oil based facial cleansers, W/O creams, and skin care products
Compliance Highlights Available
|
|
SALACOS® DG-180 | Ikeda Corporation |
|
SALACOS® DG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. All raw materials are vegetable-origin. It contains tocopherol 300ppm, glyceryl (citric acid/ fatty acid) esters 500ppm and rice bran oil 0-17ppm. This pro...view more
SALACOS® DG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. All raw materials are vegetable-origin. It contains tocopherol 300ppm, glyceryl (citric acid/ fatty acid) esters 500ppm and rice bran oil 0-17ppm. This product is recommended for oil based facial cleansers and skin care products. view less
Compliance Highlights Available
|
|
SALACOS® DP-518N | Ikeda Corporation |
|
SALACOS® DP-518N is a Polyisobuten replacement. It is a high viscosity ester. This product has good pigment dispersing ability.
Compliance Highlights Unavailable
|
|
SALACOS® FH | Ikeda Corporation |
SALACOS® FH is similar to intercellular lipid. It has excellent water-holding capacity. All raw materials are of vegetable-origin. This product is recommended for creams, lotions, foundations, cleansing creams, and lipsticks.
Compliance Highlights Available
|
||
SALACOS® GE-118 | Ikeda Corporation |
SALACOS® GE-118 is a nonionic emulsifier with HLB of 13. It contains tocopherol at approximately 300ppm. This product is recommended for facial cleansers, both oil based and water based.
Compliance Highlights Available
|
||
SALACOS® GE-318 | Ikeda Corporation |
SALACOS® GE-318 is a nonionic emulsifier with HLB of 8. It contains tocopherol of approximately 300ppm. This product is recommended for facial cleansers, both oil based and water based.
Compliance Highlights Available
|
||
SALACOS® HG-8 | Ikeda Corporation |
SALACOS® HG-8 is derived from raw materials of vegetable origin. It is easy to make stable emulsions because of the specific gravity. It contains tocopherol at approximately 100ppm. This product is recommended for skin care products and makeup products.
Compliance Highlights Available
|
||
SALACOS® HS | Ikeda Corporation |
SALACOS® HS is similar to intercellular lipid. It shows excellent water-holding capacity. This product is recommended for creams, lotions, foundations, cleansing creams, and lipsticks.
Compliance Highlights Available
|
||
SALACOS® HS-6C | Ikeda Corporation |
|
SALACOS® HS-6C is an excellent dispersing agent for pigments. All raw materials are of vegetable origin. This product is recommended for sun care products, makeup products and cleansing products.
Compliance Highlights Available
|
|
SALACOS® P-8 | Ikeda Corporation |
SALACOS® P-8 is a non-oily emollient ester. It is similar to Cetyl Ethylhexanoate. This product is recommended for hair sprays, skin creams, oil based facial cleansers, suntan lotions, and hair conditioners.
Compliance Highlights Available
|
||
SALACOS® PG-180 | Ikeda Corporation |
|
SALACOS® PG-180 is a nonionic emulsifier. It is used as a substitute for Ethylene oxide emulsifier. It contains tocopherol at approximately 300ppm. This product is recommended for oil based facial cleansers, and nano emulsions combination with DG-180.
Compliance Highlights Available
|
|
SALACOS® PG-218 | Ikeda Corporation |
|
SALACOS® PG-218 is a nonionic emulsifier with HLB of 11. It contains tocopherol at approximately 500ppm. This product is recommended for oil based facial cleansers, W/O creams, and skin care products.
Compliance Highlights Available
|
|
SALACOS® PGDSV | Ikeda Corporation |
SALACOS® PGDSV is a nonionic emulsifier with HLB of 9. All raw materials are vegetable-origin. It is supplied as a white or pale yellow solid with a slight characteristic odor. This product is recommended for O/W skin care products.
Compliance Highlights Available
|
||
SALACOS® PGMSV | Ikeda Corporation |
SALACOS® PGMSV is a nonionic emulsifier with an HLB of 14. This product is especially recommended for O/W skin care products.
Compliance Highlights Available
|
||
SALACOS® PO(T) | Ikeda Corporation |
SALACOS® PO(T) is derived from raw materials of vegetable origin. It has excellent water-holding capacity and contains tocopherol of approximately 100ppm. This product is recommended for creams, lotions, and lipsticks.
Compliance Highlights Available
|
||
SALACOS® PR-17 | Ikeda Corporation |
|
SALACOS® PR-17 is derived from vegetable raw materials. It has a smooth and moist texture like Macadamia nut oil. This product is recommended for skin care products, makeup products, and hair care products.
Compliance Highlights Available
|
|
SALACOS® PR-85 | Ikeda Corporation |
|
SALACOS® PR-85 is an ester made from raw materials of vegetable origin. It has excellent cleansing ability. This dry and silky touch emollient is recommended for oil based facial cleansers, light creams, lotions, lipsticks.
Compliance Highlights Available
|
|
SALACOS® WO-6 | Ikeda Corporation |
|
SALACOS® WO-6 is a light yellow to yellow liquid. It has superior water-holding capacity and waterproof film ability, high glossiness, and is an excellent dispersing agent for pigments. This product is recommended for creams, lip sticks, foundations, hair...view more
SALACOS® WO-6 is a light yellow to yellow liquid. It has superior water-holding capacity and waterproof film ability, high glossiness, and is an excellent dispersing agent for pigments. This product is recommended for creams, lip sticks, foundations, hair treatments. view less
Compliance Highlights Available
|
|
Sodium Acetylated Hyaluronic Acid | Ikeda Corporation |
|
Sodium Acetylated Hyaluronic Acid ( AcHA ) is a distinctive HA-derivative which is easy to use due to amphipathic properties, has high suppleness of the stratum corneum, and offers high water-retentiivity (more than 2 times than normal HA). This product ...view more
Sodium Acetylated Hyaluronic Acid ( AcHA ) is a distinctive HA-derivative which is easy to use due to amphipathic properties, has high suppleness of the stratum corneum, and offers high water-retentiivity (more than 2 times than normal HA). This product has a strong affinity for skin, and remains firmly on the surface of skin to prevent water from evaporating from skin. view less
Compliance Highlights Unavailable
|
|
Tocopherol 100 | Ikeda Corporation |
|
Tocopherol 100 is derived from vegetable oils such as soybean and rape seed. It is supplied as yellow or brown viscous oil with a slight characteristic odor. This product is used as an anti-oxidant for cosmetics. It is especially recommended for skin care...view more
Tocopherol 100 is derived from vegetable oils such as soybean and rape seed. It is supplied as yellow or brown viscous oil with a slight characteristic odor. This product is used as an anti-oxidant for cosmetics. It is especially recommended for skin care products. view less
Compliance Highlights Available
|
|
BB Cream | Ikeda Corporation | This formulation produces a BB Cream. It features the products SALACOS® WO-6, SALACOS® 913, T.I.O®, NOMCORT® HP-30, and NOMCORT® TAB. | ||
Cleansing Paste (Formulation #60714A,B) | Ikeda Corporation | This formulation produces a cleansing paste. It features the products NOMCORT® HK-P, SALACOS® PG-180, BASIS® LP-20H, and SALACOS® P-8. | ||
Cream Foundation With Nomcort AG | Ikeda Corporation | This formulation yields a cream foundation. It features the products NOMCORT® AG, SALACOS® E-38, and SALACOS® HS-6C. | ||
Milky Lotion (Formulation #2011-3-A) | Ikeda Corporation | This formulation produces a milky lotion. It features the products NOMCORT® HP-30, SALACOS® 913, SALACOS® 334, Tocopherol 100, and NOMCORT® ZZ. | ||
Sunscreen Cream With Nomcort AG | Ikeda Corporation | This formulation yields a sunscreen cream. It features the products NOMCORT® AG, BASIS® LP-20H, and SALACOS® E-38. | ||
ASC Automatic Sample Changer | Anton Paar Viscosity & Rheology | ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less | ||
FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less | ||
High-Throughput Rheometer HTR 301 | Anton Paar Viscosity & Rheology | High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less | ||
Lovis 2000 M/ME Rolling-Ball Viscometer | Anton Paar Viscosity & Rheology | Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less | ||
MCR Rheometer Series | Anton Paar Viscosity & Rheology | MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less | ||
RheoLabQC Quality Control Rheometer | Anton Paar Viscosity & Rheology | RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less | ||
Rheometer Measuring Head | Anton Paar Viscosity & Rheology | Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less | ||
RheoPlus Rheometer Software | Anton Paar Viscosity & Rheology | RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data...view more RheoPlus Rheometer Software is a user-friendly, flexible and powerful software for all Anton Paar rheometers, from quality control instruments to high-throughput rheometers. Different users can therefore easily exchange method templates and measuring data. The state-of-the-art software offers a large number of templates, automated measurement and data processing in the RheoManager, a LIM/SAP interface and 21 CFR Part 11 compatibility. view less |