UL Prospector

Success!

Successfully saved your search
ASC Automatic Sample Changer Anton Paar Viscosity & Rheology ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully aut...view more ASC Automatic Sample Changer allows the fully automated measurement of up to 32 samples in one work cycle. The positioning of the measuring cups, the measuring procedure, including data recording and subsequent cleaning of the measuring bob, are fully automatic. This unique system not only save work but also increases the quality of the measuring results due to high reproducibility. view less
CAMSIZER XT - Dynamic Image Analysis System Particle Size HORIBA Instruments, Inc. CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions...view more CAMSIZER XT features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and wet dispersions in the size range from 1µm to 3mm. It performs high resolution for narrow, mono-modal distributions, excellent dynamic measurement range for broad distributions or multi-modal samples and reliable detection of smallest amounts (< 0.1 %) of “oversize” particles. It also performs particle shape analysis (e. g. aspect ratio, symmetry or roundness for detection of agglomerates, broken particles or contaminations). CAMSIZER XT is ideal for granules and fine pellets, pulverized and granulated food, detergent powder and raw materials, plastic powders (also with electrostatic charge) metal and ore powders, abrasives (medium-sized and small grit), fine sands and cement, fine wood fibers and fine plastic fibers view less
CAMSIZER® - Dynamic Image Analysis System Particle Size HORIBA Instruments, Inc. CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source ...view more CAMSIZER® features dynamic image analysis to provide rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. 100% higher resolution. It has a new LED-stroboscope light source with 20 times higher intensity. It provides extreme depth of sharpness and improved shape and size analysis across the entire measuring range. CAMSIZER® has an optimized, process oriented software, excellent compatibility to sieve analysis it is easy to reproduce and there are several language versions.Typical examples of applications for CAMSIZER® are: Salt/sugar, Sand, Polystyrene, Plastics, Carbon black/coal, Glass/ceramics, Catalysts, Coffee, Fertilisers, Abrasives, Refractory products, Drugs, Carbon products, Foodstuffs and Metal powder. view less
Color-Tec Colorsoft Advanced Formulation & Batch Correction Formulator & Color-Tec Software Documents about the ColorSoft color matching and batch correction features and functions for advanced formulation.
ColorTec-PCM Colorimeter QC Formulator & Color-Tec Software Specification for the ColorTec low cost portable LED colorimeter for QC.
DT-1201 - Acoustic & Electroacoustic Spectrometer For Particle Size Analysis And Zeta Potential HORIBA Instruments, Inc. DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provid...view more DT-1201 - Acoustic & Electroacoustic Spectrometer uses acoustic and electroacoustic spectrometry to measure both particle size and zeta potential in very concentrated suspensions (up to 50 vol%) over a size range of 5nm-100µm. Acoustic measurements provide a wealth of information beyond particle size and zeta potential. For well developed applications, acoustic parameters can be correlated to other product variables. It's advantages over light based techniques include: no dilution needed the sample is measured in native state, it is much less sensitive to contamination, there is no calibration needed, higher precision and wide size range from 5nm to 100 microns. DT-1201 measures sound attenuation and velocity of any fluid like material, gels and milk, for example. view less
FRS1600 Furnace Rheometer System Anton Paar Viscosity & Rheology FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Mater...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less
High-Throughput Rheometer HTR 301 Anton Paar Viscosity & Rheology High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the ...view more High-Throughput Rheometer HTR 301 is the first fully automated rheometer available. Rheological measurements are carried out by MCR rheometers in the high quality the instruments are known for, while a robot handles all additional tasks pertaining to the measurement. Measurements are performed with concentric cylinder as well as with cone-and-plate and parallel-plate geometries – a novelty in automated rheometry. The basic MCR 301 setup remains as modular and customizable as ever - with the difference that HTR 301 now performs all measuring steps automatically, operated by a robot. In its standard setup, it processes 96 samples in a single run – working for up to 24 hours a day. view less
LA-300 - Portable Routine Laser Diffraction Analyzer HORIBA Instruments, Inc. The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-30...view more The LA-300 - Portable Routine Laser Diffraction Analyzer uses Mie Scattering (laser diffraction) to measure particle size of suspensions or dry powders. The speed and ease-of-use of this technique makes it the most popular for many applications. The LA-300's revolutionary size makes it a welcome change to the other large and cumbersome designs. It's real-time displays of particle size distribution and sample concentration let the user check sample at all times. Using a diode laser, the LA-300 measures particles ranging anywhere between 0.1 and 600 μm in diameter with unprecedented precision, and processes high-resolution data for display within 20 seconds. The wide measurable range makes it ideal for application in fundamental studies and quality control of production lines in such diverse fields as pharmaceuticals, fine ceramics, metal powders, polymers, pigments, paints/coatings, adhesives, catalysts, minerals and clays, just to name a few. view less
LA-950 - High Performance Laser Diffraction Analyzer HORIBA Instruments, Inc. LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different in...view more LA-950 - High Performance Laser Diffraction Analyzer uses an innovative optical system to obtain the world's widest dynamic range of 10 nm – 3000 mm. This makes it possible to perform precise particle size measurements on a wide scale in many different industries. From ultra-fine nano-order particles to individually visible particles, all can be measured with this single instrument. Designed to handle the entire range of applications extending from the complex needs of research to routine quality control procedures, the LA-950 offers practicality as a"standard instrument" that is easy to use and enables precise measurement. LA-950 has a wide range of applications including: nano-level research and development, ceramics, pigments, battery materials, catalysts, cosmetics, pharmaceuticals and food products. view less
Lovis 2000 M/ME Rolling-Ball Viscometer Anton Paar Viscosity & Rheology Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or ...view more Lovis 2000 M/ME Rolling-Ball Viscometer measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 400 µL sample volume. Results are given as relative, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves space in the lab. It is the successor to Anton Paar’s AMVn automated microviscometer. view less
MCR Rheometer Series Anton Paar Viscosity & Rheology MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or c...view more MCR Rheometer Series is based on a concept at the cutting edge of technology. The EC motor technique, the low friction bearing and the patented normal force sensor have been optimized over years to satisfy the highest demands of rheologists. Any type or combination of rheological tests, both in rotational and oscillatory mode, are possible with the MCR rheometers. The modularity of the system allows the integration of a wide range of temperature devices and application-specific accessories. view less
PSA300 - Static Image Analysis System Particle Size HORIBA Instruments, Inc. PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an int...view more PSA300 - Static Image Analysis System Particle Size is a state of the art turn-key image analysis solution. Seamless integration of Clemex's powerful particle characterization software and an automated microscope with high resolution camera creates an intuitive, easy-to-use imaging workstation. Analysis of numerous samples from the same batch guarantees significant statistical measurements. Clemex/Horiba PSA300 is the only image analysis system that offers this advantage. Using the microscopy solution allows to: measure different-sized particles in the same run; measure and isolate particles on the basis of shape, color, size and texture; automatically validate the accuracy and precision of measurements; scan large or small areas of one or many samples; customize reports and meet compliance. PSA300 can measure fine and ultra-fine micronized particles of many types of powdered materials. view less
Q-FOG Cyclic Corrosion Tester Q-Lab, Inc. Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforc...view more Q-FOG® cyclic corrosion chambers from Q-Lab can run traditional salt spray, Prohesion, and most cyclic automotive tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG chambers are constructed of reinforced fiberglass and there is no internal steel framework to corrode. They feature precise control of fog volume through the use of a variable speed peristaltic pump. Variable humidity control and shower capabilities are available as options. A remarkably simple user interface allows for easy user programming and operation. The Q-FOG controller includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down. Purified water is required for proper operation. view less
Q-SUN Xenon Test Chambers Q-Lab, Inc. Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different ...view more Q-SUN® xenon arc chambers reproduce the damage caused by full-spectrum sunlight and rain. In a few days or weeks, Q-SUN testers can reproduce the damage that occurs over months or years outdoors. Q-SUN xenon arc chambers are available in three different models: the tabletop Xe-1, and full-sized Xe-2 and Xe-3. Each air-cooled tester features Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet, a variety of standard sample holders and a remarkably simple user interface available in five languages. view less
QUV Accelerated Weathering Tester Q-Lab, Inc. Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or we...view more Sunlight and moisture cause millions of dollars of material damage every year. The QUV® accelerated weathering tester tests materials by exposing them to alternating cycles of UV light and moisture at controlled, elevated temperatures. In a few days or weeks, the QUV tester can reproduce the damage that occurs over months or years outdoors. With thousands of testers in service worldwide, the QUV tester is the world's most widely used weathering tester. QUV testers are available in four different models: QUV/basic, QUV/se, QUV/spray, and QUV/cw. Each air-cooled tester featured Q-Lab's renowned reliability and ease of maintenance. All testers have standard datalogging via ethernet and/or USB, a variety of standard sample holders, automatic fault recognition and alarms, automatic shut-down timer, and a remarkably simple user interface available in five languages. view less
RheoLabQC Quality Control Rheometer Anton Paar Viscosity & Rheology RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over fl...view more RheoLabQC Quality Control Rheometer is a quality control rheometer based on state-of-the-art technologies that are also used in R&D rheometers. It combines unrivaled performance with easy operation and robust design, from quick single-point checks over flow curve and yield point determinations to complex rheological investigations. It is a rotational rheometer based on the Searle principle, which features a high-precision encoder, a highly dynamic EC motor, and is also used in the MCR rheometer series, providing excellent speed regulation. view less
Rheometer Measuring Head Anton Paar Viscosity & Rheology Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solu...view more Rheometer Measuring Head is a customized rheometry with the performance of a MCR rheometer - the rheometer measuring head can be used for automation or for special measuring purposes that exceed the limits of a laboratory rheometer. It is the perfect solution for process integration or building a customized rheometer system. The modular device consists of a measuring head, which is equipped with the well-known motor and air bearing technology of the MCR series, and a separate control unit. view less
SA-9600 Series Surface Area Analyzers HORIBA Instruments, Inc. SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. ...view more SA-9600 Series Surface Area Analyzer brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements with push-button ease. It's use of the flowing-gas method allows routine total surface area measurements to be made as quickly as every six minutes, depending on magnitude of surface area. The three-station SA-9603 analyzer measures three samples simultaneously. Because it is fully automated, the SA-9600 series eliminates variables that are sometimes introduced by operator involvement, such as the measurement of nitrogen or movement of the dewer flasks. The SA-9600 provides quick, user friendly specific surface area analysis for a wide variety of powders ranging from catalysts to active pharmaceutical ingredients (API’s). Low surface area API’s and excipients are particularly well suited for analysis by the SA-9600, which provides a quicker measurement time at a lower cost than competitive options. view less
SZ-100 - Nanopartica Series Instruments HORIBA Instruments, Inc. SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advan...view more SZ-100 - Nanopartica Series Instruments is a highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle diameter, zeta potential, and molecular weight. Advantages of SZ-100 include sampling measurement using the industry’s lowest sample volume of 100 μL is possible and arithmetic processing from an auto-correlation function by a Fourier transformation to electrical mobility. SZ-100 provides a mean to highly accurate, highly reproducible measurement: electro-osmotic flow countermeasure. Some applications for SZ-100 include biomaterials such as vitamins, enzymes and metals. view less