VINNAPAS® 5021 T | Wacker Chemical Corporation | VINNAPAS® 5021 T is a thixotropic product with good adhesion and water resistance. | Request Sample |
CAB-O-SIL® PTG | Univar Solutions | CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. ...view more CAB-O-SIL® PTG is a medium-surface area of untreated fumed silica that is suitable for use in the thickening of unsaturated polyester resins. It enables thickening, thixotropic (shear-thinning), and anti-settling behavior in unsaturated polyester resins. This thixotropic behavior enables good penetration of the resin into the matrix during application and prevents dripping. view less | Request Sample |
CLAYTONE-40 | BYK | CLAYTONE-40 is a rheology additive in powder form based on an organophilic phyllosilicate for non-polar to medium-polar systems to create a thixotropic flow behavior. | |
CLAYTONE-VP V | BYK | CLAYTONE-VP V is a powdered rheology additive based on an organophilic phyllosilicate for non-polar to medium-polar systems to produce a thixotropic flow behavior. | |
RHEOBYK-7410 CA | BYK | RHEOBYK-7410 CA is a liquid rheology additive to produce a highly thixotropic flow behavior for medium-polar solvent-borne and solvent-free systems. | |
RHEOBYK-7420 CA | BYK | RHEOBYK-7420 CA is a liquid rheology additive to produce thixotropic flow behavior in aqueous and highly polar systems for improving anti-sagging and anti-settling properties. | |
RHEOBYK-7420 ET | BYK | RHEOBYK-7420 ET is a liquid rheology additive to generate thixotropic flow behavior in aqueous and highly polar systems to improve the anti-sagging and anti-settling properties. | |
LAPONITE B | BYK | LAPONITE B is a synthetic layered fluorosilicate. It is insoluble in water but hydrates and swells to give translucent, colorless colloidal dispersions. At 2 % concentration in water, highly thixotropic gels are obtained. | |
Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
THIXCIN® R | Elementis | THIXCIN® R rheological additive is a non-hygroscopic organic thixotrope of castor oil. It imparts high thickening efficiency. This rheology modifier is suitable for various solventborne paint and coating systems. | |
THIXATROL® P200A | Elementis | THIXATROL® P200A is a predispersed solventborne polyamide wax suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. | |
Cimsil A55G | Tolsa, S.A. | Cimsil A55G is a thixotropic powder additive. It can be used in cement and/or lime and gypsum systems. It is used as an additive for mortars and stuccos rendering, tile adhesive mortars, self-leveling mortars, and waterproofing mortars. | |
RHEOBYK-7411 CA | BYK | RHEOBYK-7411 CA is a liquid rheology additive for low-polarity solvent-borne and solvent-free systems to produce a highly thixotropic flow behavior and to improve anti-sagging and anti-settling properties. | |
CLAYTONE® 40 | BYK | CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achiev...view more CLAYTONE® 40 is an organophilic bentonite derivative which is used as thixotropic thickener and anti-settling agent in solvent based coating systems of low to medium polarity. It is a traditional organoclay requiring the addition of an activator to achieve full efficiency. As organophilic smectite product, it can swell in organic media and build a gel structure (card-house structure). Weak hydrogen bonding between the single smectite platelets is the reason for this thixotropic gel structure. For optimum efficiency the complete separation of the platelets (complete dispersion of agglomerates into primary particles) is necessary. view less | |
CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...view more CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. view less | |
Thixol™ 50 S | Arkema Rheology & Specialty Additives | Thixol™ 50 S is a liquid acrylic self-associative thickener providing a thixotropic rheological profile to water-based systems, preventing them from settling and sagging without affecting leveling properties. | Request Sample |
OPTIBENT® 987 | BYK | OPTIBENT® 987 is a carefully selected, activated layered silicate product that has been developed for dry pre-mixed mortars and emulsion based systems. It shows a marked thixotropic effect and incorporates a yield value into the system. | |
CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...view more CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. view less | |
HL-150 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...view more HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less | |
RHEOBYK-411 | BYK | RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommen...view more RHEOBYK-411 is a liquid rheology additive for low-polarity solvent-borne and solvent-free coating systems to improve anti-sagging and anti-settling properties. The additive causes highly thixotropic flow behavior; post-addition is possible. It is recommended for low-polarity systems. view less | |
RHEOBYK-420 | BYK | RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotrop...view more RHEOBYK-420 is a liquid rheology additive for aqueous and water-reducible coating systems for improving anti-sagging and anti-settling properties. The additive is also especially suited for manufacturing aqueous pigment concentrates. RHEOBYK-420 causes thixotropic flow behavior; post-addition is possible. view less | |
THIXATROL® P200X | Elementis | THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheologi...view more THIXATROL® P200X is a predispersed solventborne polyamide wax designed to provide excellent thixotropy, anti- sag and anti-settling properties. It is suitable for use under less than optimum dispersion conditions and as a post addable thixotropic rheological additive that is useful in a wide range of solvents. view less | |
HL-200 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...view more HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
HL-300 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
HL-380 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less | |
HB-620 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. view less | |
HB-615 | Guangzhou GBS High-Tech & Industry Co., Ltd. | HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. view less | |
THIXATROL® AS 8024 | Elementis | THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-...view more THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations. view less | |
Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...view more Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. view less | |
OPTIBENT® 1056 | BYK | OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability proper...view more OPTIBENT® 1056 is a high-quality, carefully selected and activated layered silicate product and has been developed for cementitious tile adhesives and base coats (renders). Due to its excellent thixotropic properties, sag resistance and workability properties can be improved. This product is used for dry mix mortars and adhesives view less | |
CV-2189-2 | NuSil Silicone Technology 1 | CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals an...view more CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals and other hazards. It is also ideal for applications that require precise delivery configurations. view less | |
Cimsil A35 | Tolsa, S.A. | Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in ...view more Cimsil A35 is a powdered additive that modifies the rheology of mortar, gypsum plaster, and concrete. It is a thixotropic additive specifically developed to act as an anti-sagging, anti-slipping agent that improves the work ability and visual finish in the systems to which it is incorporated. It can be used in ceramic adhesives, ready mixed adhesives, crack fillers, and pastes. view less | |
CLAYTONE® APA | BYK | CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotrop...view more CLAYTONE® APA is a modified montmorillonite designed for use in systems containing aromatic solvent or aromatic-oxygenated solvent blends that display medium to high polarity. CLAYTONE® APA demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. view less | |
OPTIGEL® WA | BYK | OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This produc...view more OPTIGEL® WA, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. It has a neutral pH-value and is particularly effective in neutral and alkaline systems. This product prevents the settling of heavy pigments or fillers, inhibits sagging, and allows the application of thick coatings. view less | |
CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...view more CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. view less | |
HDK® N20 | Wacker Chemical Corporation | HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in el...view more HDK® N20 is a synthetic, hydrophilic amorphous silica applied as a thickening and thixotropic agent in many organic systems, e.g. in unsaturated polyesters, coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® N20 acts as a free flow additive in the production of technical powders. view less | Request Sample |
CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...view more CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. view less | |
KMP 15000M | Vink Chemicals GmbH & Co. KG | KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties...view more KMP 15000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
KMP 6000M | Vink Chemicals GmbH & Co. KG | KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties....view more KMP 6000M is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
KMP 150000M2 | Vink Chemicals GmbH & Co. KG | KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properti...view more KMP 150000M2 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, stuccos, fillers, and white render finishes. view less | |
R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...view more R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. view less | |
HDK® H18 | Wacker Chemical Corporation | HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. Th...view more HDK® H18 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in composites, coatings, adhesives and sealants, especially in vinylester, epoxy and polyurethane systems. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a carbon content of approx. 4,5%, and a pH value of 4,0-6,8. view less | Request Sample |
OPTIGEL® LX | BYK | OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in wat...view more OPTIGEL® LX is a modified bentonite which has been specially developed as a thickening agent for aqueous systems. It is an effective thixotropic thickener. This product is specially designed for use in latex emulsion systems and should not be used in water reducible (cosolvent) systems. It can be used alone or in combination with cellulosic materials to improve pigment suspension and to impart dripless application properties. view less | |
CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...view more CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. view less | |
SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...view more SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. view less | |
Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...view more Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. view less | |
Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
KMP 100000 | Vink Chemicals GmbH & Co. KG | KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 100000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. view less | |
KMP 200000 | Vink Chemicals GmbH & Co. KG | KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pr...view more KMP 200000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, plasters, and white render finishes. view less | |
KMP 30000M4 | Vink Chemicals GmbH & Co. KG | KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic propertie...view more KMP 30000M4 is a modified type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, and white render finishes. view less | |
CAB-O-SIL® EH5 | Cabot Corporation - Additives | CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and ...view more CAB-O-SIL® EH5 is a very high surface fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. This product is well suited for use in adhesives and sealants, coatings, and printing inks. view less | |
CN2273 | Sartomer Americas | CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithograp...view more CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithographic inks. Its flexibility, low viscosity, and fast surface cure speed make CN2273 suitable for overprint varnishes and coatings requiring low odor. view less | |
Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...view more Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. view less | |
KMP 100000N | Vink Chemicals GmbH & Co. KG | KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 100000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
KMP 150000N | Vink Chemicals GmbH & Co. KG | KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotrop...view more KMP 150000N is a non-surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
KMP 75000 | Vink Chemicals GmbH & Co. KG | KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic pro...view more KMP 75000 is a surfaced treated type hydroxypropyl methyl cellulose in the form of a white powder. It provides enhanced water retention, lubricity, and shrink and crack resistance, as well as improved adhesion, longer open-time, and better thixotropic properties. This product is well suited for use in cement-based tile adhesives, mortars, grouts, stuccos, fillers, plasters, and white render finishes. view less | |
CN2271E | Sartomer Americas | CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oli...view more CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oligomer is perfect for diluting epoxy acrylates, improving adhesion, and increasing the cure rate. Recommended uses are coatings, flexo, gravure and offset inks. view less | |
LAPONITE® RD | BYK | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...view more LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. view less | |
LAPONITE® RD | Univar Solutions | LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used f...view more LAPONITE® RD is a synthetic layered silicate. It is insoluble in water but hydrates and swells to give clear and colourless colloidal dispersions. At concentrations of 2% or greater in water, highly thixotropic gels can be produced. This product is used for imparting a shear sensitive structure to a wide range of waterborne formulations. These include household and industrial surface coatings, cleansers, ceramic glazes, agrochemical, oilfield and horticultural products. view less | Request Sample |
R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
CRAYVALLAC® PA3 X 20 | Arkema Rheology & Specialty Additives | CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotrop...view more CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less | Request Sample |
Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...view more Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. view less | |
CLAYTONE® AF | BYK | CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a hig...view more CLAYTONE® AF is a modified montmorillonite designed for use in systems containing aliphatic solvents and aliphatic-aromatic solvent blends that display low to medium polarity. CLAYTONE® AF produces reproducible viscosity and thixotropic development, a high degree of sag control and prevents pigment settling. CLAYTONE® AF is self dispersing and does not require a polar activator. CLAYTONE® AF eliminates the need for high shear or pregels. view less | |
OPTIGEL® WX | BYK | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | |
OPTIGEL® WX | Univar Solutions | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...view more OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. view less | Request Sample |
Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...view more Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. view less | |
CLAYTONE® HT | BYK | CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a...view more CLAYTONE® HT is a modified montmorillonite designed for use in systems containing aromatic and aliphatic solvents that display low to medium polarity. CLAYTONE® HT demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. This product is a high performance rheological additive for use in high performance oil based paints and is especially suited to industrial, marine and maintenance coatings. view less | |
Valida L,3% | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
Valida S191C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
Valida S231C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
OPTIGEL® CK | BYK | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | |
OPTIGEL® CK | Univar Solutions | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This produc...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | Request Sample |
CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotrop...view more CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. view less | |
HDK® H15 | Wacker Chemical Corporation | HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers...view more HDK® H15 is a synthetic, hydrophobic, amorphous silica that is produced via flame hydrolysis. It is applied as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics and others. It is used as a reinforcing filler in elastomers, mainly silicone-elastomers. HDK® H15 acts as a free flow additive in the production of technical powders. This product has a density at 20°C (SiO²) of approx. 2,2 g/cm³, a residual silanol content of 50%, and a pH value of 3,8-4,8. view less | Request Sample |
LAPONITE® RDS | BYK | LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotrop...view more LAPONITE® RDS is a synthetic layered silicate incorporating an inorganic polyphosphate peptiser. It hydrates and swells in water to give clear and colourless colloidal dispersions of low viscosity known as sols. At 10% concentration in water, these will remain free flowing for 24 hours. On addition of small quantities of electrolyte, highly thixotropic gels are formed rapidly. This product is used to impart a shear sensitive structure to a wide range of waterborne formulations including household and industrial surface coatings, cleansers, agrochemical and horticultural products. view less | |
LAPONITE® SL25 | BYK | LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotrop...view more LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...view more Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. view less | |
UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotrop...view more UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. view less | |
Benox® B55 | UNITED INITIATORS GMBH & CO KG | Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent ...view more Benox® B55 is a fine dispersion of dibenzoyl peroxide in a smooth, non-separating fire resistant creamy paste form with a white or red thixotropic cream appearance. It can freely be dissolved in monomers and resins and is primarily used as a curing agent and polymerization initiator for acrylic, monomeric vinyl, styrene, co-polymers, and unsaturated polyester/vinyl ester resins. Benox® B55 can also be used in two-part adhesive systems based on methacylate or polyester resins. view less | |
CAB-O-SIL® H5 | Cabot Corporation - Additives | CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and h...view more CAB-O-SIL® H5 is a high surface area fumed silica that can be used to provide thickening, thixotropic, and anti-settling behavior in liquid systems. It is characterized by high purity, aggregated structure, submicron particle size, low bulk density, and hyprophilic surface chemistry. It is also used for building viscosity in non-polar to medium polarity systems. This product is well suited for use in adhesives, coatings, composites, cosmetics, food, pharmaceuticals, powder coatings, sealants, and silicone rubber systems. view less | |
Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...view more Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. view less | |
CAB-O-SIL® H5 | Univar Solutions | CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), ...view more CAB-O-SIL® H5 is a high surface area fumed silica that can impart a significant increase in the viscosity of liquid systems, and both reinforcement and viscosity of sealants and rubbers. It can be used to provide thickening, thixotropic (shear-thinning), and anti-settling behavior in liquid systems. High shear dispersion equipment is required to realize the full benefits of H-5 fumed silica. For clear coatings and other systems, well-dispersed CAB-O-SIL® H5 fumed silica allows for good transparency. view less | Request Sample |
LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotrop...view more LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. view less | |
Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...view more Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. view less | |
ARBOCEL® P 4000 X | J. Rettenmaier & Söhne GmbH & Co. KG | ARBOCEL® P 4000 X is a cellulose gel, co-processed with cellulose gum and xanthan in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert ARBOCEL® P 4000 X into a (thermo-)stable, thixotropic gel, with anti-se...view more ARBOCEL® P 4000 X is a cellulose gel, co-processed with cellulose gum and xanthan in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert ARBOCEL® P 4000 X into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. view less | |
Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotrop...view more Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. view less | |
Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...view more Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. view less | |
CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally su...view more CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. view less | |
Pyrogenic Silica RS-50 | Glassfillers.com (A unit of Vitrominerals Inc.) | Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic r...view more Pyrogenic Silica RS-50 is a hydrophilic, 100% recycled synthetic, fully X-ray amorphous silica, produced by flame hydrolysis. It is a white, submicron-sized powder of great purity and a surface area of 20 to 50 m2/g. RS-50 is effective as a thixotropic rheology control and thickening agent in many polymer systems, such as unsaturated polyesters, adhesives, sealants, coatings, printing inks, etc. It can be used as active strengthening filler in silicone-elastomers and elastomers. Pyrogenic Silica RS-50 has a specific gravity of 2.2, a bulk density of 23 to 25 lb/ft3 vibrated, oil absorption of 65 g/100g, a pH of 6.0 (4% dispersion in water), a refractive index of 1.46, and a softening temperature of ~1600 °C. view less | |
Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotrop...view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less | |
VIVAPUR® MCG 500 F | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 500 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 500 F into a (thermo-)stable, thixotropic gel, with anti-setting prop...view more VIVAPUR® MCG 500 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 500 F into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 500 F is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. view less | |
VIVAPUR® MCG 611 FS | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 611 FS is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 611 FS into a (thermo-)stable, thixotropic gel, with anti-setting pr...view more VIVAPUR® MCG 611 FS is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 611 FS into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 611 FS is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. view less | |
VIVAPUR® MCG 811 F | J. Rettenmaier & Söhne GmbH & Co. KG | VIVAPUR® MCG 811 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 811 F into a (thermo-)stable, thixotropic gel, with anti-setting prop...view more VIVAPUR® MCG 811 F is a cellulose gel, co-processed with cellulose gum in form of a dispersable powder. By using shear energy (dissolver, kneader) it is possible to convert VIVAPUR® MCG 811 F into a (thermo-)stable, thixotropic gel, with anti-setting properties, which improves the rheology of water-based systems. VIVAPUR® MCG 811 F is a compound of EU approved food additives which comply with the specifications according to Reg. (EU) No. 231/2012 and Food Chemical Codex. JRS products are based on natural materials. We strive to maximize the value of plant based sidestreams via extracting biodegradable additives for manifold applications. With our regrowing fibers and polymers, sustainability and functionality are introduced in composites, adhesives and many more products. view less | |
GARAMITE® 7303 | BYK | GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, ty...view more GARAMITE® 7303 was developed using the patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7303 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. view less | |
GARAMITE® 7305 | BYK | GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typica...view more GARAMITE® 7305 was developed using patented Mixed Mineral Thixotrope (MMT) technology. The MMT technology provides performance benefits which are not possible with traditional organoclay additives. Traditional organoclays are very hard to disperse, typically requiring both very high shear mixing and a polar activator to help delaminate the aggregates of clay platelets. Due to the multiple particle morphologies of this product, the powder disperses very easily into oils or solvents with only moderate shear. GARAMITE® 7305 exhibits a very unique rheology profile compared to other thickening additives. Very high low-shear viscosity can be achieved by incorporating this product into formulations which results in outstanding ant-settling and anti-syneresis properties. However, when a shear force is applied, the viscosity is quickly reduced which allows for excellent application properties. It is most suited for medium to high polarity systems. view less |