| AEROSOL® IB-45 Surfactant | Univar Solutions | AEROSOL® IB-45 Surfactant is a very hydrophilic surface active agent that exhibits excellent compatibility with electrolytes. It is an extremely efficient wetting agent in high concentrations of electrolytes. | Request Sample |
| AEROSOL® MA-80 I Surfactant | Univar Solutions | AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets...view more AEROSOL® MA-80 I Surfactant is a surface tension depressant and an emulsifying, dispersing, and solubilizing agent exhibiting high electrolyte tolerance. It promotes penetration and spreading of organic liquids as films which break up into minute droplets. view less | Request Sample |
| AEROSOL® OT-70 PG Surfactant | Univar Solutions | AEROSOL® OT-70 PG Surfactant is a surfactant with high flash point. It is an excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-75 Surfactant | Univar Solutions | AEROSOL® OT-75 Surfactant is a surfactant with excellent wetting, re-wetting, and levelling agent. | Request Sample |
| AEROSOL® OT-B Surfactant | Univar Solutions | AEROSOL® OT-B Surfactant is widely used in the preparation of readily wettable and dispersible agricultural free-flowing powder and water-soluble granule formulations. | Request Sample |
| Bisomer® Amine D700 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect o...view more Bisomer® Amine D700 (77% aqueous dimethylaminohydroxy-propane solution) is a multifunctional amino alcohol additive for aqueous polymer systems. It forms an aqueous azeotrope that minimizes dry time and maximizes amine elimination. The surfactant effect of Bisomer® Amine D700 provides enhanced pigment dispersion, wetting and flow with additional benefits for water-based system formulators. This product has a water content of 22-24%, an active matter of 74-77.5%, a colour number of 200 Pt/Co max., and a molecular weight of 103g/mol. view less | |
| Brij™ C20 | Croda Coatings & Polymers | Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ C20 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L23 | Croda Coatings & Polymers | Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ L23 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ L4 | Croda Coatings & Polymers | Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety o...view more Brij™ L4 is a multifunctional, non-silicone and non-fluorinated colorless, liquid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Brij™ S10 | Croda Coatings & Polymers | Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety ...view more Brij™ S10 is a multifunctional, non-silicone and non-fluorinated white, waxy solid wetting agent with excellent environmental profiles. This product is a part of the Brij range of nonionic surfactants which are natural fatty ethers derived from a variety of straight and branched chain alcohols. The function and application of the Brij range is dependent on both the source fatty alcohol and the degree of ethoxylation. view less | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...view more Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. view less | |
| Crodafos™ T6A | Croda Coatings & Polymers | Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also ...view more Crodafos™ T6A is a POE isotridecyl phosphate used as a formulation enhancer to solve challenges in aqueous and non-aqueous formulations. It is a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. It also functions as a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match any formulation needs. view less | |
| Crodamide S | Croda Coatings & Polymers | Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pre...view more Crodamide S is a fast migrating primary amide additive which gives excellent anti-blocking performance at low temperatures. Adhesive pellets or film often exhibit adhesion between the polymer pellets or layers when exposed to elevated temperatures and pressures. This product is used to prevent adhesive granulates from sticking together during storage at moderate and low temperatures. Crodamide S also prevents adhesive film layers to attract dirt or stick together before application by reactivation or melting. It can be incorporated directly into polymers to prevent any unwanted adhesion. The amide migrates fast to the surface of the material on cooling to form a non-sticking ‘release’ layer. It may be used in conjunction with organic additives such as talc to enhance performance. view less | |
| DABCO® LK 221 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® LK 221 is an organic surfactant that serves as a good emulsifier, epsecially for 1,4-BDO in polyol blends, and improves adhesion. | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as w...view more DAPRO® U-99 is a high performance waterborne/solventborne interfacial tension modifier designed for use at relatively low levels to eliminate or diminish film defects. It is particularly effective in solvent based two- component epoxy systems as well as waterborne and solvent based alkyd systems and decorative coatings. view less | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...view more DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. view less | |
| DBE-224 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-621 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-712 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-814 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBE-821 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-534 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DBP-732 | Gelest, Incorporated | Polyalkylene oxide modified silicone widely used as a surfactant and emulsifier. | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DYNASYLAN® AMEO-T | Evonik Operations GmbH, BL Silanes | DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a re...view more DYNASYLAN® AMEO-T is a blend of primary and secondary aminofunctional silanes. The dual nature of the product allows it to bind chemically to both inorganic materials and organic polymers, thus acting as an adhesion promoter, a surface modifier or as a reactive reagent. view less | |
| Dynasylan® MEMO | Evonik Operations GmbH, BL Silanes | Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less | |
| Dynasylan® VTEO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| Dynasylan® VTMO | Evonik Operations GmbH, BL Silanes | Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick. | |
| DYNOL™ 604 Surfactant | Evonik Operations GmbH, BL Interface & Performance | DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...view more DYNOL™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. view less | |
| Dynol™ 607 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants ...view more Dynol™ 607 surfactant has been developed to meet the growing need for high performance and cost effective surfactants. It provides a unique balance of properties for a wide range of waterbased industrial applications compared with traditional surfactants such as fluorosurfactants and silicones. Dynol™ 607 applications may include, coatings, graphic arts, adhesives, latex dipping, dye and pigment synthesis, pigment grinding, metalworking fluids, waste water treatment and more. view less | |
| Dynol™ 980 Surfactant | Evonik Operations GmbH, BL Interface & Performance | Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offe...view more Dynol™ 980 superwetting surfactant is an optimized siloxane-based surfactant providing good equilibrium and dynamic surface tension reduction in a wide range of aqueous formulations. Designed to provide superwetting on difficult-to-wet substrates, it offers superior substrate wetting with low foam and excellent compatibility. The characteristics of Dynol™ 980 surfactant enable exceptional performance in waterborne wood coatings and overprint varnishes. This product can also provide good flow and leveling under diverse application conditions. view less | |
| Eco Soluryl 124 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suita...view more Eco Soluryl 124 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is glycol ether free, provides good pigment dispersion, good ink transfer and printability, and is suitable for highly viscous inks. view less | |
| Eco Soluryl 72 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol e...view more Eco Soluryl 72 is a glycol ether free grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It is ideal for use as a pigment grinding vehicle for glycol ether free ink, polymer surfactant for glycol ether free emulsion, and coating materials for glycol ether free water base OPV. view less | |
| Eco Soluryl 824 | Hanwha Chemical (Thailand) Co., Ltd. | Eco Soluryl 824 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, and excellent ink transfer and printability. | |
| Extra Virgin Coconut Oil | Alnor Oil Company, Inc. | Extra Virgin Coconut Oil is derived from the meat of coconuts. It is cold-pressed and filtered. It is ideal for use in a wide range of applications. | |
| Genapol® PF 40 | Univar Solutions | Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concent...view more Genapol® PF 40 is a low-foaming nonionic surfactant for the chemical industry. It can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 40 is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This cloudy, colourless solution has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 40 is used as a low-foaming surfactant with very good dispersing action in detergents and cleaning agents. Typical applications include rinsing aids, detergents for dishwashers and bottle -rinsing machines and industrial cleaning formulations. Genapol® PF 40 is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | Request Sample |
| Genapol® PF 80 Powder | Univar Solutions | Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to ac...view more Genapol® PF 80 Powder is a low-foaming, nonionic surfactant for the chemical industry. This white powder can be used in combination with other nonionic, anionic and cationic surfactants. Genapol® PF 80 powder is resistant to water hardness salts and to acids and alkalis in the concentrations normally used. This product has good wetting and dispersing action coupled with low foaming tendency. Genapol® PF 80 powder is used as a low-foaming surfactant with very good dispersing action in detergent and cleaning agent powders. These can be produced simply by mixing the powder components. Genapol® PF 80 powder is also used as a low-foaming emulsifier in emulsion polymerization and as a dispersing agent for pigment pastes and preparations. view less | Request Sample |
| Genapol® X 100 | Univar Solutions | Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. ...view more Genapol® X 100 is a nonionic surfactant for the chemical industry. This white waxy product is used e.g. in detergents, industrial & institutional cleaning formulations, in emulsion polymerization and as an emulsifier for polyolefin waxes or silicon oils. This product is also available as Genapol® X 100 Terra, providing the same performance as its conventional counterpart and benefiting from a REDCert2 and ISCC Plus certified supply chain ensuring the use of biobased or renewable raw materials resulting in a significantly reduced carbon footprint and an RCI 61.7%. view less | Request Sample |
| GEROPON® 99 | Univar Solutions | GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through ove...view more GEROPON® 99 is a highly efficient, low VOC, anionic surfactant. It’s high flash point and low odor make this product easy to handle. GEROPON® 99 improves flow and leveling of semi and gloss paints while reducing or eliminating crawling and cut-through over greasy and glossy surfaces. It can also be used as a re-wetting agent in board or adhesives for quick strike. view less | Request Sample |
| H-Sperse® 2000A | Harcros Chemicals, Inc. | H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglome...view more H-Sperse® 2000A is a built for purpose dispersant which has been phosphated to give it unique anionic characteristics. The ionic phosphate groups bind tightly to a variety of inorganic materials, while the non-ionic hydrophobe portion will prevent agglomeration and flocculation of many types of inorganic particulate materials. It is APE/NPE free, and exhibits very low toxicity. The phosphate functional group promotes excellent adhesion to the inorganic particulate giving good dispersion stability under difficult conditions, such as highly saline solutions. The phosphate groups can also enhance fire retardancy. In addition, the phosphate groups can also enhance corrosion resistance in coatings applied to metals. view less | |
| H-Sperse® 2000N | Harcros Chemicals, Inc. | H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and ...view more H-Sperse® 2000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particulates and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. view less | |
| H-Sperse® 3000N | Harcros Chemicals, Inc. | H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pig...view more H-Sperse® 3000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Useful for dispersing many organic particles and pigments in aqueous applications. It is especially useful for dispersing carbon black in inks and paints. Dispersions made using this material demonstrate long term viscosity stability. Typically, higher loadings can be achieved, with lower viscosity, compared to other commonly used dispersants. It is especially suitable for making dispersions of carbon black for higher end ink and coatings applications. view less | |
| H-Sperse® 4000N | Harcros Chemicals, Inc. | H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate lon...view more H-Sperse® 4000N is a built for purpose, non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. It is APE/NPE free, and exhibits very low toxicity. Dispersions made using this material demonstrate long term viscosity stability. It is especially suitable for making carbon black dispersions for higher end ink and coatings applications. Excellent color strength may be achieved by using H-Sperse® 4000N. view less | |
| H-Sperse® 5500N | Harcros Chemicals, Inc. | H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a gener...view more H-Sperse® 5500N is a non-ionic polymeric dispersant designed for dispersing organic pigments and particles in aqueous applications. The hydrophobe used to make this material will attach to a wide variety of different particles making it valuble as a general purpose dispersant. Dispersions made using H-Sperse® 5000N demonstrate long term viscosity stability. As a non-ionic dispersant, it makes dispersions that will be stable under a wide range of pH conditions, both acidic and basic. Viscosity may vary with pH, so this must be explored to determine the best pH for the application. It is especially suitable for making dispersions of carbon black. view less | |
| Maxemul™ 6106 | Croda Coatings & Polymers | Maxemul™ 6106 is a non-migratory, non-ionic surfactant for emulsion polymerisation, synthesis of binders for coatings and adhesives with excellent emulsion stability, dry films with excellent moisture resistance, and electrolyte tolerance. | |
| Maxemul™ 6112 | Croda Coatings & Polymers | Maxemul™ 6112 is a non-migratory, anionic surfactant for superior emulsion stability in latex systems and excellent moisture resistance or adhesive properties in coatings or psa's. | |
| Octosol 730 | Tiarco Chemical | Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce q...view more Octosol 730 is a surfactant composed of ammonium cocoate in aqueous solution. It can be used as an emulsifier, dispersant, wetting agent, and foaming agent. This product exhibits the excellent frothing and foam stabilizing abilities necessary to produce quality-frothed adhesives and latex foams. view less | |
| PAT-ADD DA 302 | Patcham USA | PAT-ADD DA 302 is a pigment wetting agent for waterborne paints and colorants. It is APEO free, so it replaces APEO wetting agents such as NP 10, NP 9, OP 9. Other benefits include: strong prevention of pigment flocculation, floating, flooding, and pigmen...view more PAT-ADD DA 302 is a pigment wetting agent for waterborne paints and colorants. It is APEO free, so it replaces APEO wetting agents such as NP 10, NP 9, OP 9. Other benefits include: strong prevention of pigment flocculation, floating, flooding, and pigment settling; relatively non/low-toxicity in comparison to classical non-ionic wetting agents, and prevents pigment separation, -rub-up, -flocculation, and -floatation. view less | |
| PAT-ADD DA 501 | Patcham USA | PAT-ADD DA 501 is a polymeric wetting and dispersing agent for use in industrial paints and tinters. PAT-ADD DA 501 is a most effective for organic pigments. Main benefits are: optimizes color development, strong prevention of pigment flocculation, floati...view more PAT-ADD DA 501 is a polymeric wetting and dispersing agent for use in industrial paints and tinters. PAT-ADD DA 501 is a most effective for organic pigments. Main benefits are: optimizes color development, strong prevention of pigment flocculation, floating, flooding, and pigment settling, excellent performance in industrial coatings, and universal usage for WB industrial paints and pigment concentrates. view less | |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...view more Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. view less | |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...view more Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. view less | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...view more Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. view less | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...view more Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. view less | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 77 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...view more Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. view less | |
| Polymer ST 77 | Evonik Operations GmbH, BL Silanes | Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assemb...view more Polymer ST 77 is free of phthalates and is highly recommended for demanding applications where a balanced stress-strain behavior is required as in transport and assembly applications. Examples for the use of Polymer ST 77-based formulations are the assembly of superstructural parts, bumpers, etc. Mechanical fastening is often avoided as it could cause damage to the materials used. In addition, it could negatively affect the design. view less | |
| RHODAFAC® RS 410 | Univar Solutions | RHODAFAC® RS 410 is a very effective APE-free primary anionic surfactant for acrylic, styrene acrylic, and vinyl acrylic latex synthesis. | Request Sample |
| RHODAFAC® RS 610/A25 | Univar Solutions | RHODAFAC® RS 610/A25 is a very effective APE-free primary anionic surfactant for acrylic, styrene acrylic, and vinyl acrylic latex syntheses. It exhibits desirable properties in films, including corrosion inhibition, heat, and light stability and clarity. | Request Sample |
| SIPOMER® PAM 600 | Univar Solutions | SIPOMER® PAM 600 is a polymerizable surfactant providing excellent adhesion on inorganic substrates. | Request Sample |
| Soluryl 121W | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 121W is a low acid number solid resin for water-based products, and is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wood coating, and a coating materials for water-based OPV. | |
| Soluryl 60L | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating m...view more Soluryl 60L has a low acid number and Low Tg solid resin for water-based products. It is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wall paper, blister pack, wood coating and graphic arts, coating materials for water base OPV, and solvent base ink and OPV. view less | |
| Soluryl 70 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 70 is a grinding vehicle and polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and good viscosity stability and high gloss. | |
| Soluryl 80 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 80 is a grinding vehicle & polymer surfactant for water-based products, and is compatible with most common emulsion. It is ideal for use as a pigment grinding vehicle, polymer surfactant for emulsion, and coating materials for water base OPV. | |
| Soluryl 90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 90 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, excellent ink transfer and printability, and is suitable for mid viscous inks. | |
| Soluryl 94 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl 94 is a glycol ether free grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, good ink transfer and printability, and is suitable for mid viscous inks. | |
| Soluryl S-120 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-120 is a grinding vehicle & polymer surfactant for water-based products that is compatible with most common emulsions. It provides good pigment dispersion, good ink transfer and printability, high viscosity, and good resistance. | |
| Soluryl S-122W | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-122W is a low acid number solid resin for water-based products, and is compatible with most common emulsions. It is ideal for use as a polymer surfactant for emulsion for wood coating, and coating materials for water-based OPV. | |
| Soluryl S-820 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-820 is a grinding vehicle & polymer surfactant for water-based products and is compatible with most common emulsions. It provides good pigment dispersion, high gloss and transparent, and excellent ink transfer and printability. | |
| Soluryl S-840 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl S-840 is a Styrene Acrylic resin for the neutral pH water-based products and is compatible with most common emulsions. It provides high gloss, good pigment dispersion, and good polymer surfactant for emulsion polymerization. | |
| Soluwet100 | Hanwha Chemical (Thailand) Co., Ltd. | Soluwet100 is a nonionic surfactant for grinding pigment and making emulsion with typical properties. It is ideal for use in Pigment grinding additives for ink, nonionic surfactant for emulsion, and as a wetting agent for water base OPV. | |
| Soluwet200 | Hanwha Chemical (Thailand) Co., Ltd. | Soluwet200 is a Nonionic surfactant for grinding pigment and is compatible with most common solid resins and emulsions. It is ideal for use for pigment grinding additives for ink. | |
| Surfadol® 541 (2,4,7,9-Tetramethyl-5-decyne-4,7-diol, TMDD) | ACME | Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a...view more Surfadol® 541 is a 100% active waxy solid nonionic wetting agent and molecular defoamer. It is acetylenic diol gemini surfactant that provides dynamic wetting and defoaming in waterborne coatings, inks and adhesives systems. This product is available in a number of solvent cuts as well as powdered forms. It is silicone and APE-free. view less | |
| Surfadol® 541E Surfactant | ACME | Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...view more Surfadol® 541E is a 50% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| Surfadol® 541H Surfactant | ACME | Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applic...view more Surfadol® 541H is a 75% active liquid (Ethylene Glycol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| Surfadol® 541PA Surfactant | ACME | Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical app...view more Surfadol® 541PA is a 50% active liquid (Isopropyl Alcohol solution) nonionic wetting agent and molecular defoamer. It provides defect-free defoaming and dynamic wetting benefits in waterborne coatings, inks, adhesives systems and agricultural chemical applications. This product is silicone and APE-free. view less | |
| SURFONIC® NB-407 Surfactant | Univar Solutions | SURFONIC® NB-407 surfactant is the 70% active aqueous solution of SURFONIC® N-400 surfactant, the 40-mole ethoxylate of nonylphenol. SURFONIC NB-407 surfactant is offered as an easily handled liquid form of SURFONIC® N-400 surfactant. The product, whi...view more SURFONIC® NB-407 surfactant is the 70% active aqueous solution of SURFONIC® N-400 surfactant, the 40-mole ethoxylate of nonylphenol. SURFONIC NB-407 surfactant is offered as an easily handled liquid form of SURFONIC® N-400 surfactant. The product, which is stable in electrolyte solutions, offers water solubility at elevated temperatures. emulsifier for emulsion polymerization, stabilizer for synthetic latices and emulsifier for fats and waxes. view less | Request Sample |
| SURFYNOL® 104 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing ...view more SURFYNOL® 104 surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104 surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. view less | |
| SURFYNOL® 104A | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing...view more SURFYNOL® 104A surfactant is one in a series of Air Products’ surfactants that provide a unique combination of performance benefits including wetting, defoaming and improving pigment dispersions. SURFYNOL® 104A surfactant is a nonionic molecule containing a hydrophilic portion in the middle of two symmetrical hydrophobic groups. Its unique chemical structure allows this product to provide multifunctional properties such as surface tension reduction, foam control and viscosity stabilization. view less | |
| SURFYNOL® 104BC | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in 2-Butoxyethanol. | |
| SURFYNOL® 104DPM | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Dipropylene Glycol Monomethyl Ether. | |
| SURFYNOL® 104E | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104H SURFACTANT | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 75% active liquid in Ethylene Glycol. | |
| SURFYNOL® 104PA | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Isopropyl Alcohol. | |
| SURFYNOL® 104PG-50 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 50% active liquid in Propylene Glycol. | |
| SURFYNOL® 104S | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that has multifunctional benefits, including wetting and foam control, in aqueous systems. 46% active powder on Amorphous Silica. | |
| Surfynol® 107 L | Evonik Operations GmbH, BL Interface & Performance | Surfynol® 107 L is a low-viscosity surfactant that provides substratre wetting and defoaming properties. It also acts as coalescing aid. | |
| SURFYNOL® 2502 | Evonik Operations GmbH, BL Interface & Performance | An ethoxylated/propoxylated acetylenic-based surfactant that provides specific performance benefits in a broad range of water-based systems. 100% active liquid. | |
| SURFYNOL® 420 | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions both as a wetting agent and foam control agent. 100% active liquid with an HLB of 4. | |
| SURFYNOL® 440 | Evonik Operations GmbH, BL Interface & Performance | A nonfoaming, nonionic surfactant that is employed for substrate wetting. 100% active liquid with an HLB of 8. | |
| SURFYNOL® 465 | Evonik Operations GmbH, BL Interface & Performance | A nonionic, low-foaming surfactant that is utilized for its wetting and slight emulsification properties. It has a high cloud point for utilization in high-temperature systems. 100% active liquid with an HLB of 13. | |
| SURFYNOL® 485W | Evonik Operations GmbH, BL Interface & Performance | A nonionic surfactant that functions as a wetting agent and has slight emulsification properties. 75% active liquid with an HLB of 17. | |
| SURFYNOL® 82 | Evonik Operations GmbH, BL Interface & Performance | This is a 95% Dimethyl Octynediol surfactant. | |
| SURFYNOL® CT-131 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-131 is a solvent-free, low-foaming pigment grind aid designed for use in aqueous systems. | |
| SURFYNOL® CT-171 | Evonik Operations GmbH, BL Interface & Performance | SURFYNOL® CT-171 is a solvent-free anionic/nonionic grind aid designed to provide both effective pigment wetting and dispersing characteristics for many types of organic pigments. | |
| SURFYNOL® DF-37 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A nonionic, acetylenic-based defoamer which promotes foam control as well as surface wetting. A unique additive designed to minimize web formation during latex glove and waterborne coating dipping processes. | |
| SURFYNOL® PSA-336 | Evonik Operations GmbH, BL Interface & Performance | A powerful solvent-free wetting agent with moderate foaming tendencies. | |
| SURFYNOL® SE | Evonik Operations GmbH, BL Interface & Performance | A nonionic defoaming surfactant which can act as a highly effective wetting agent, defoamer and viscosity stabilizer and often performs more than one of these functions in combination. 80% active liquid with an HLB of 4-5. | |
| SURFYNOL® SE-F | Evonik Operations GmbH, BL Interface & Performance | A nonionic self-emulsifiable surfactant that will reduce surface tension and control foam. 80% active liquid with an HLB of 4-5. | |
| Synperonic™ 13/12 | Croda Coatings & Polymers | Synperonic™ 13/12 is a nonionic surfactant with good pigment wetting and emulsifying properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. | |
| Synperonic™ 13/6 | Croda Coatings & Polymers | Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional...view more Synperonic™ 13/6 is a nonionic surfactant with good wetting properties. It is a highly efficient emulsifier with improved cycle time and excellent stability, covering a wide range of HLB values to match your formulation needs. It is also a multifunctional non-silicone and non-fluorinated wetting agent with excellent environmental profiles. view less | |
| T-5000 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in c...view more T-5000 Polyether Amine is a primary polyether triamine which appears as a colorless to pale yellow liquid with a slight haze. This product is has a molecular weight of 5000 and a water weight percentage of less than 25. T-5000 Polyether Amine is used in coatings and acts as an adhesive in epoxy systems. view less | |
| TEGOSTAB® B 8900 | Evonik Operations GmbH, BL Comfort & Insulation | TEGOSTAB® B 8900 is a silicone-based surfactant with strong cell-opening and degassing properties. | |
| Thetawet™ FS-8000 | Innovative Chemical Technologies, Inc. | Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous s...view more Thetawet™ FS-8000, in the form of a yellow paste, is a short-chain nonionic fluorinated surfactant that can be used in paints, coatings, adhesives, caulks, sealants, and inks. This product is soluble in water and has a pH of 6.0 +/- 1.0 in a 1% aqueous solution. Its melting point is below 55 degrees Celsius. view less |
