UL Prospector
Prospector

Success!

Successfully saved your search
72 Results
ASTORLITE® J50 (4636A) The International Group, Inc. (IGI Wax) ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary.
BARECO™ C-4040 Univar Solutions BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available i...view more BARECO™ C-4040 is a microcrystalline wax that is petroleum-derived microcrystalline waxes consisting of complex mixtures of paraffinic, isoparaffinic, and naphthenic hydrocarbons. It refines and optimized for your specific requirements and are available in grades ranging from hard, high melting crystalline waxes to soft, low melting flexible waxes. view less Request Sample
CERETAN T 90 Munzing Chemie CERETAN T 90 is a white fine granule that is a homopolymer hard paraffin. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives.
CERETAN T 91 Munzing Chemie CERETAN T 91 is a white fine granule that is a high metling fischer-tropsch wax. It is a lubricant and releasing agent that is a modification of hotmelt and is used coatings and adhesives.
CRAYVALLAC® PA3 X 20 Arkema Rheology & Specialty Additives CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 p...view more CRAYVALLAC® PA3 X 20 is a pre-activated amide wax dispersed in a mixture of xylene and alcohols. It is a rheology modifier in paste form for post-addition to solvent-based industrial coatings and industrial wood finishes. The use of CRAYVALLAC® PA3 X 20 provides a very simple and direct means of introducing shear-thinning rheology with thixotropic viscosity recovery to coating formulations. view less Request Sample
CRAYVALLAC® SLT Arkema Rheology & Specialty Additives CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...view more CRAYVALLAC® SLT is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 30 - 80°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less Request Sample
CRAYVALLAC® SLW Arkema Rheology & Specialty Additives CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially desi...view more CRAYVALLAC® SLW is a 100 % active and highly bio-sourced polyamide rheology modifier designed for manufacture of reactive adhesives & sealants, especially high tack systems (high filler content, demanding applications…). CRAYVALLAC® SLW is specially designed for manufacture of one-component Silyl-Terminated-Polymer systems where processing temperatures typically lie within the range 55 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less Request Sample
CRAYVALLAC® SLX Arkema Rheology & Specialty Additives CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the r...view more CRAYVALLAC® SLX is a 100 % active and highly bio-sourced polyamide powder rheology modifier designed for the low temperature manufacture of moisture curing methoxysilane based sealants and adhesives where processing temperatures typically lie within the range 60 - 90°C. It imparts a shear thinning rheology profile allowing ease of application followed by excellent sag and slump resistance. view less Request Sample
CRAYVALLAC® WN-1495 Arkema Rheology & Specialty Additives CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...view more CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. view less Request Sample
EVACOTE® 7089A The International Group, Inc. (IGI Wax) EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications.
IGI® 0431G The International Group, Inc. (IGI Wax) IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point.
IGI® 1230A The International Group, Inc. (IGI Wax) IGI® 1230A is a fully refined paraffin wax.
IGI® 1239A The International Group, Inc. (IGI Wax) IGI® 1239A is a fully refined wax with a mid-range melting point.
IGI® 1250A The International Group, Inc. (IGI Wax) IGI® 1250A is a fully refined paraffin wax.
IGI® 1260A The International Group, Inc. (IGI Wax) IGI® 1260A is a fully refined paraffin wax.
IGI® 1297A The International Group, Inc. (IGI Wax) IGI® 1297A is a fully refined paraffin wax with excellent heat stability.
IGI® 1303A The International Group, Inc. (IGI Wax) IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles.
IGI® 2202A The International Group, Inc. (IGI Wax) IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination.
IGI® 2251A The International Group, Inc. (IGI Wax) IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C).
IGI® 2281A The International Group, Inc. (IGI Wax) IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...view more IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. view less
IGI® 2288A The International Group, Inc. (IGI Wax) IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...view more IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. view less
IGI® 2289A The International Group, Inc. (IGI Wax) IGI® 2289A is a crude scale paraffin wax derived from petroleum.
IGI® 6006A The International Group, Inc. (IGI Wax) IGI® 6006A is a specialty wax formulation for “one pour” container candles.
IGI® 6027A The International Group, Inc. (IGI Wax) IGI® 6027A is a specialty formulation for container candles.
IGI® 6028A The International Group, Inc. (IGI Wax) IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles.
IGI® 6046A The International Group, Inc. (IGI Wax) IGI® 6046A is a specialty formulation for use in container candles.
MICROSERE® 5788A The International Group, Inc. (IGI Wax) MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles.
MICROSERE® 5806A The International Group, Inc. (IGI Wax) MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications.
MICROSERE® 5871A The International Group, Inc. (IGI Wax) MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications.
MICROSERE® 5890A The International Group, Inc. (IGI Wax) MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF).
MICROSERE® 5896A The International Group, Inc. (IGI Wax) MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.
MICROSERE® 5897A The International Group, Inc. (IGI Wax) MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.
MICROSERE® 5909A The International Group, Inc. (IGI Wax) MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.
MICROSERE® 5910A The International Group, Inc. (IGI Wax) MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.
MICROSERE® 5999A The International Group, Inc. (IGI Wax) MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point.
PARAFFLEX® 4625A The International Group, Inc. (IGI Wax) PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles.
PARAFFLEX® 4630A The International Group, Inc. (IGI Wax) PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles.
PARAFFLEX® 4797A The International Group, Inc. (IGI Wax) PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard.
PETROFIBE® 0251A The International Group, Inc. (IGI Wax) PETROFIBE® 0251A is a mixture of soft petroleum waxes.
Polyethylene Wax BassTech International Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms.
POLYWAX™ 1000 Univar Solutions POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ 2000 Univar Solutions POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ 3000 Univar Solutions POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ 400 Univar Solutions POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ 500 Univar Solutions POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ 850 Univar Solutions POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ EP-1100 Copolymer Univar Solutions POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density...view more POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
POLYWAX™ EP-700 Copolymer Univar Solutions POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density ...view more POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less Request Sample
SLIP-AYD® SL 1606 Elementis SLIP-AYD® SL 1606 is a 100 % oxidized waterborne/solventborne polyethylene powder, specialty wax, suitable for variety of coatings and ink applications. It provides excellent mar, abrasion and block resistance properties in industrial coatings and inks.
SLIP-AYD® SL 177 Elementis SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight ...view more SLIP-AYD® SL 177 provides improved surface characteristics of waterborne/solventborne coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. The effect of a wax can be altered by blending several waxes together. view less
SLIP-AYD® SL 18 Elementis SLIP-AYD® SL 18 is a waterborne/solventborne dispersion of polyethylene wax in 2-Butxyethanol solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking.
SLIP-AYD® SL 295A Elementis SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic wa...view more SLIP-AYD® SL 295A provides improved surface characteristics of coatings. This is one of several waterborne wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less
SLIP-AYD® SL 300 Elementis SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular...view more SLIP-AYD® SL 300 is waterborne/solventborne, and provides improved surface characteristics of coatings. This is one of several wax types dispersed in a variety of water/solvent/vehicle blends. High Melt Polyethylene waxes are extremely hard, low molecular weight synthetic waxes. High loadings may tend to reduce gloss. view less
SLIP-AYD® SL 404 Elementis SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent...view more SLIP-AYD® SL 404 is a fine particle size solventborne dispersion of hard polymeric wax in 2-Butoxyethanol solvent. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less
SLIP-AYD® SL 425 Elementis SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide ra...view more SLIP-AYD® SL 425 is a fine particle size waterborne/solventborne dispersion of hard polymeric wax in xylene solvent and polymeric plastisizer. It provides excellent slip and good block resistance. Solvent selection allows the product to be used in wide range solvent based applications. It may be used in high gloss systems with very little effect on gloss. view less
SLIP-AYD® SL 50 Elementis SLIP-AYD® SL 50 is a solventborne dispersion of polyethylene wax in xylene solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking.
SLIP-AYD® SL 506 Elementis SLIP-AYD® SL 506 is a fine particle size waterborne/solventborne dispersion of carnauba wax in dipropylene glycol methyl ether solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used ...view more SLIP-AYD® SL 506 is a fine particle size waterborne/solventborne dispersion of carnauba wax in dipropylene glycol methyl ether solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. view less
SLIP-AYD® SL 508 Elementis SLIP-AYD® SL 508 is a fine particle size waterborne dispersion of carnauba wax in isopropanol solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and so...view more SLIP-AYD® SL 508 is a fine particle size waterborne dispersion of carnauba wax in isopropanol solvent. It provides excellent low coefficient of friction and product release. Solvent selection allows the product to be used in a wide range of aqueous and solvent based applications. view less
SLIP-AYD® SL 551 Elementis SLIP-AYD® SL 551 is a solventborne dispersion of a high melt polyethylene wax in Aromatic 100/n-Butanol solvents. SL 551 provides exceptional resistance to blocking, abrasion and improved slip properties.
SLIP-AYD® SL 555 Elementis SLIP-AYD® SL 555 is a 100 % solventborne powder, polyolefin/carnauba blend wax, suitable for variety of coating and ink applications. This product provides carnauba-like properties by providing excellent very low coefficient of friction and excellent prod...view more SLIP-AYD® SL 555 is a 100 % solventborne powder, polyolefin/carnauba blend wax, suitable for variety of coating and ink applications. This product provides carnauba-like properties by providing excellent very low coefficient of friction and excellent product release for solvent free and UV systems. view less
SLIP-AYD® SL 600 Elementis SLIP-AYD® SL 600 is a 100 % solventborne powder, specialty wax, suitable for variety of coating and ink applications.This product provides excellent slip, abrasion and block resistance properties for all types of solvent and water based coatings and inks.
SLIP-AYD® SL 78 Elementis SLIP-AYD® SL 78 is a solventborne dispersion of polyethylene wax in short-oil coconut alkyd resin/xylene solvent. It provides significant reduction of coefficient of friction and good resistance to marring, scuffing, abrasion and metal marking.
VESTOWAX® C 20 Flakes/Micro prills Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. ...view more VESTOWAX® C 20 Flakes/Micro prills is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white pellets, and it has a drop point of 106-111 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® C 60 Powder Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a ...view more VESTOWAX® C 60 Powder is an oxidised Fischer-Tropsch wax. This grade is supplied in the form of white powder, and it has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® C 60 Prills Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applicatio...view more VESTOWAX® C 60 Prills is an oxidised Fischer-Tropsch wax. This grade has a drop point of 100-105 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® C40 Micro prills Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® C40 is a Fischer-Tropsch wax oxidate with an acid number of 24-27 mg KOH/g Request Sample
VESTOWAX® EH 100 Pellets Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-...view more VESTOWAX® EH 100 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white pellets, and it has a drop point of 102-110 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® FM 1012 Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® FM 1012 is a micronised Fischer-Tropsch/PFTE wax. Request Sample
VESTOWAX® H 2050 MG Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® H 2050 MG is a non-functionalised Fischer-Tropsch hard paraffin. Request Sample
VESTOWAX® SH 105 Pellets Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-P...view more VESTOWAX® SH 105 Pellets is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® SH 105 Powder Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Pr...view more VESTOWAX® SH 105 Powder is a non-functionalised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white powder, and it has a drop point of 108-114 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample
VESTOWAX® SH 112 Evonik Operations GmbH, BL Coating & Adhesive Resins VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Proces...view more VESTOWAX® SH 112 is a micronised Fischer-Tropsch hard paraffin. This grade is supplied in the form of white micronised powder, and it has a drop point of 112-120 °C. The VESTOWAX® product range includes synthetic waxes produced by a Fischer-Tropsch-Process. They act as a value additive for hot melt and other applications. This process yields straight-chain products possessing low viscosity in the melt and having molecular weights of between 500 and 1,000 g/mol. view less Request Sample