| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane...view more Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| 2,4-DIETHYL-1,5-PENTANEDIOL (PD-9) | KH Neochem Americas, Inc. | Intermediate for Polyurethane, Polyester etc. | |
| Priplast™ 3172 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3172 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for very flexible substrates and reactive hotmelt polyurethane adhesives. It offers superior hydrolytic resistance and mechanical properties. | |
| 2-BUTYL-2-ETHYL-1,3-PROPANEDIOL (BEPG) | KH Neochem Americas, Inc. | Intermediate for Polyurethane, Polyester and powder coating resin. | |
| SMPU 224 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 224 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...view more SMPU 224 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. view less | |
| SMPU 225 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 225 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...view more SMPU 225 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. view less | |
| SMPU 301 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 301 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...view more SMPU 301 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. view less | |
| SMPU 402 | Guangzhou GBS High-Tech & Industry Co., Ltd. | SMPU 402 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU seal...view more SMPU 402 is a multialkoxysilane-terminated polyurethane prepolymer featuring good viscosity adjustability, printability, sealing & adhesion properties, and weather, water, & chemical resistance. This product can be used to replace silicon, MS, and PU sealants for automotive, construction, and shipping applications. view less | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...view more Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. view less | |
| Priplast™ 3192 | Croda Coatings & Polymers | Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane...view more Priplast™ 3192 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives with excellent hydrolytic resistance and mechanical properties. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3190 | Croda Coatings & Polymers | Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane...view more Priplast™ 3190 is a liquid, semi-crystalline, dimer fatty acid based polyester polyol building block for PU coatings, adhesives and sealants with good compatability with polyether and polyester polyols. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) | Cargill Industrial Specialties | Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane...view more Priplast™ 3238 – Amorphous Polyester Polyol (2000 MW) is a 100% bio-based polyester polyol used in PU systems with rubbery elasticity, compatibility to low polar components. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| N,N-Dimethylcyclohexyl-amine Lupragen® N 100 | BASF SE, Intermediates Division | N,N-Dimethylcyclohexyl-amine Lupragen® N 100 is a catalyst for isocyanate reactions. Coatings technology for polyurethane resin production. | |
| Priplast 3172 | Croda Coatings & Polymers | Priplast 3172 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings and adhesives for excellent durability and adhesion. | |
| Bisomer® PPA 6 | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has a...view more Bisomer® PPA 6 offers a less traditional route to the production of UV curable urethane acrylate oligomers. It is an excellent low shrinkage reactive diluent for UV systems based on urethane acrylates and vinyl esters (epoxy acrylates). This product has an acid numer of < 0.3mg KOH/g, a saponification value of 126-138mg KOH/g, a volatile components pf 0.5% max., and a molecular weight of 420g/mol. Bisomer® PPA6 has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers, including emulsion polymers. This product is ideal in the preparation of UV oligomers, emulsion polymers, printing inks and polyurethane dispersions (PUDs). It is also used in more traditional acrylic polyols for surface coatings. view less | |
| Priplast™ 3190 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3190 is a semi crystalline polyester polyol building block for use in polyurethane coatings and adhesives. It offers good compatibility with polyether and polyester polyols. | |
| 2-Methylimidazole | BASF SE, Intermediates Division | 2-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Methylimidazole is used for two components epoxy systems; for the modification of epoxy resins and for the preparation of polyurethanes. | |
| Priplast 3186 | Cargill Industrial Specialties | Priplast 3186 is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. | |
| Priamine™ 1074 - Dimer Diamine | Cargill Industrial Specialties | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
| Priamine™ 1074 - Dimer Diamine | Croda Coatings & Polymers | Priamine™ 1074 is a low viscous dimer diamine building block for use in polyamides and polyurethane coatings and adhesives. It offers high flexibility, moisture repellency and adhesion. | |
| Priplast 3162 | Croda Coatings & Polymers | Priplast 3162 is a semicrystalline, dimer fatty acid based polyester polyol building block for PU coatings (PUD) for excellent wetting of rigid and fibrous substrates providing hardness, flexibility and good adhesion. | |
| TRI-REZ® Polyol 1030-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-60 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has a viscosity (Brookfield @ 25°C) of 40-60P, a moisture content of 0.05% max., and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| TRI-REZ® Polyol 1030-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1030-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1030-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product has an acid value (as supplied) of 0.8mg KOH/g max., a viscosity (Brookfield @ 25°C (as supplied)) of 15-30 Poise, and a colour (APHA) of 250 max. view less | |
| Polythf® 1400 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1400 is building block for plasticizer, and soft segment of poly-urethane dispersions. Polymers with PolyTHF® 1400 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1400 introduces high flexibility into polymer molecules. | |
| 2-Ethyl-4-Methylimidazole | BASF SE, Intermediates Division | 2-Ethyl-4-Methylimidazole is a selective catalyst for epoxy and urethane reactions. 2-Ethyl-4-methylimidazole is used for two components epoxy systems, for the modification of epoxy resins and for preparation of polyurethanes. | |
| Priplast™ 3192 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3192 is a semi crystalline polyester polyol building block for use in polyurethane dispersions for use in both rigid and flexible substrates. It offers superior hydrolytic resistance and mechanical properties. | |
| Priplast™ 3188 - Polyester Polyol (Amorphous) | Croda Coatings & Polymers | Priplast™ 3188 is an amorphous polyester polyol building block for use in a wide variety of polyurethane systems. It offers hydrolytic stability and is suitable for cross-linked or 2K systems. | |
| Priplast™ 3162 - Polyester Polyol (Semi-Crystalline) | Cargill Industrial Specialties | Priplast™ 3162 is a semi crystalline polyester polyol building block for use in polyurethane dispersions. It offers good surface hardness combined with flexibility and good adhesion and offers excellent wetting of substrates. | |
| Priplast 3187 | Cargill Industrial Specialties | Priplast 3187 is a dimer fatty acid based polyester polyols building block for PU adhesives, sealants and elastomers; provides high flexibility at very low temperatures, and good compatibility to low polar components. | |
| Polurene LP 100 LV | S.A.P.I.C.I. SpA | Polurene LP 100 LV is a polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and can be used to improve the flexibility of epoxy systems. It is designed for use in adhesives. | |
| tert.-Amyl alcohol | BASF SE, Intermediates Division | Tert.-Amyl alcohol special solvent for coatings. Tert.-Amyl alcohol is suitable for two-components (2K) polyurethane coatings (automotive repair coatings, plastic coatings). It increases the pot-life of two-component (2K) coatings. | |
| Polythf® 1800 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1800 is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1800 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1800 introduces high flexibility into polymer molecules. | |
| Pripol™ 1025 | Cargill Industrial Specialties | Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resist...view more Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Pripol 2030 Dimerdiol | Cargill Industrial Specialties | Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical re...view more Pripol 2030 Dimerdiol is a dimer diol building block for polyurethane and polyester coatings, adhesives and elastomers. It provides exceptional thermo-oxidative stability, good colour, water repellency, flexibility and outstanding hydrolysis / chemical resistance. view less | |
| TRI-REZ® Polyol 1230-90 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for...view more TRI-REZ® Polyol 1230-90 Polyester Resin is a non-crystalline low viscosity saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-90 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with an acid value (as supplied) of 0.8mg KOH/g max., a hydroxyl content (as supplied) of 87-93mg KOH/g, and a viscosity (Brookfield @ 25°C (as supplied)) of 100-200P. view less | |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | Univar Solutions | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | Request Sample |
| Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 | BASF SE, Intermediates Division | Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints...view more Diazabicylooctane (DABCO) Lupragen® N 201, N 202, N 203 catalyst for urethane reactions. Diazabicyclooctane is suitable for production of polyurethanes and as catalyst for two-components paints (automotive OEM and repair paints, plastic paints and paints for general industry). view less | |
| PRIPOL™ 1009 | Cargill Industrial Specialties | High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and...view more High purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics / elastomers. Provides water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| Priplast 3196 | Cargill Industrial Specialties | Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications...view more Priplast 3196 is a diimer fatty acid based polyester polyol building block for PU sealants and elastomers providing extreme hydrophobicity, excellent durability and good hydrocarbon compatibility for polymer blends. Possible use in soft touch applications. view less | |
| Pripol 1006 | Cargill Industrial Specialties | Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemi...view more Pripol 1006 is a high purity hydrogenated dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good color, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. view less | |
| TRI-REZ® Polyol 1230-60 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating h...view more TRI-REZ® Polyol 1230-60 Polyester Resin is a non-crystalline saturated linear polyester polyol designed for polyurethane based coatings, adhesives and foams. The hydrophobic flexible structure of TRI-REZ® 1230-60 makes it an ideal polyol for formulating high solids and water-borne polyurethane resins. This product is a clear, viscous liquid, with a density (pounds / gallon @ 25°C) of 9.3 +/- 0.3, a moisture content of 0.05 max., viscosity (Brookfield @ 25°C (as supplied)) of 300-500P, and a hydroxyl number (as supplied) of 57-63mg KOH/g. view less | |
| Priplast 1838 | Cargill Industrial Specialties | Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plasti...view more Priplast 1838 is a dimer fatty acid based polyester polyol building block for PU adhesives, sealants and elastomers providing extreme hydrophobicity, excellent colour and durability and good flow and wetting properties on non-polar substrates, like plastics. view less | |
| PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF...view more PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF® 250 techn. introduces flexibility into polymer molecules. view less | |
| PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S int...view more PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S introduces flexibility into polymer molecules. view less | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construct...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and constructi...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less | |
| Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into...view more PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into polymer molecules. view less | |
| Polurene LP 100 NFF | S.A.P.I.C.I. SpA | Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving t...view more Polurene LP 100 NFF is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product has good rheology and does not release any nonyl-phenoles, which reduces its hazard classification. It can be used as an adhesive in improving the flexibility of epoxy systems. view less | |
| N,N-BIS(3-Aminopropyl)-methylamine | BASF SE, Intermediates Division | N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized...view more N,N-BIS(3-Aminopropyl) methylamine is a potential building block for polyurethanes, cross linker for epoxy resins. N,N-Bisaminopropyl-methylamine is suitable for epoxy coatings and epoxy-based plastic parts. It may be used to prepare cationic stabilized polyurethane dispersions. view less | |
| PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. ...view more PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce high flexibility into polymer molecules. view less | |
| N-Methylpyrrolidone, NMP | BASF SE, Intermediates Division | N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings...view more N-Methylpyrrolidone, NMP is a universal polar solvent for cleaning of metals, glasses and plastics, for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Methylpyrrolidone is used for plastic coatings, for water-borne coatings and for electro insulation coatings. view less | |
| epsilon-Caprolactone, CLO | BASF SE, Intermediates Division | Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combinatio...view more Epsilon-Caprolactone, CLO can be used as an intermediate for two-components paints for plastic coatings and automotive repair coatings, for poly-urethane dispersions for waterborne coatings and for UV-coatings. Epsilon-Caprolactone, CLO with a combination of flexibility and hardness (toughness) epsilon-Caprolactone can provide special mechanical properties in segmented polymers. view less | |
| Bisomer® PEM6 LD | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane...view more Bisomer® PEM6 LD is based on ethylene oxide, is water soluble and contains a primary hydroxyl group. It is non-toxic and has an EINECS “Polymer” classification. It has a low Glass Transition Temperature (Tg) and offers excellent plasticising properties when incorporated into polymers. This product has a hydroxul value of 145-165mg KOH/g, a molecular weigh (av) of 350g/mol, and an inhibitor (MEHQ) content of 500-800ppm. Bisomer® PEM6 LD is ideal in the preparation of hydrogels, wood impregnants, soil stabilisers and polyurethane dispersions (PUDs). It is also used extensively in the manufacture of more traditional acrylic polyols and urethane methacrylate oligomers for use in photo imaging applications such as printed circuit boards (PCBs) and dry film resists (DFRs). view less | |
| M-CURE® 203 | Sartomer Americas | M-CURE® 203 is an aromatic urethane acrylate designed to improve the flexibility and toughness of epoxy/amine cured coatings. Cured epoxy coatings containing M-CURE® 203 will have improved elongation properties, moderate tensile strengths, and improved ab...view more M-CURE® 203 is an aromatic urethane acrylate designed to improve the flexibility and toughness of epoxy/amine cured coatings. Cured epoxy coatings containing M-CURE® 203 will have improved elongation properties, moderate tensile strengths, and improved abrasion properties. Adhesives, coatings, floor and metal coatings and sealants are the recommended uses for this product. view less | |
| Trixene SC 7702 | Baxenden Chemicals Ltd. | Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stabili...view more Trixene SC 7702 is an isocyanate-terminated prepolymer based on aromatic diisocyanates. It has recommended applications mainly in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7703 | Baxenden Chemicals Ltd. | Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/...view more Trixene SC 7703 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It's recommended applications are in coatings and 1-K roof membranes. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7707 | Baxenden Chemicals Ltd. | Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance ...view more Trixene SC 7707 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It is mainly recommended for applications in coatings. This aliphatic product is mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7722 | Baxenden Chemicals Ltd. | Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7722 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7725 | Baxenden Chemicals Ltd. | Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability...view more Trixene SC 7725 is isocyanate-terminated prepolymers based on aromatic diisocyanates. It has recommended applications mainly in low monomer and 1,2-K coatings. The aliphatic products are mainly exploited for coating applications where good light stability and/or resistance to yellowing are prime requirements. view less | |
| Trixene SC 7902 | Baxenden Chemicals Ltd. | Trixene SC 7902 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Trixene SC 7930 | Baxenden Chemicals Ltd. | Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coat...view more Trixene SC 7930 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements, 1-K moisture cure coatings. view less | |
| Trixene SC 7931 | Baxenden Chemicals Ltd. | Trixene SC 7931 is isocyanate-terminated prepolymers based on aliphatic diisocyanates. It has recommended mainly for sealants and coating applications where good light resistance and/or stability to yellowing are prime requirements. | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan RB 1150 | Baxenden Chemicals Ltd. | Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and floori...view more Quasilan RB 1150, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Alongside the appropriate crosslinkers, Quasilan polyols can be formulated as 2-K coating and sealant systems mainly for DIY and flooring markets. view less | |
| Quasilan RB 1943 | Baxenden Chemicals Ltd. | Quasilan RB 1943, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. Quasilan RB 1943 has applications in DIY and flooring markets and 2-K sealants and coatings. | |
| Quasilan RB 1999 | Baxenden Chemicals Ltd. | Quasilan RB 1999, in the form of a clear-hazy amber liquid, is branched polyols containing both ester and ether groups. This product is mainly used in 2-K sealants and coatings. | |
| N,N-Dimethylethanol-amine Lupragen® N 101 | BASF SE, Intermediates Division | N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints...view more N,N-Dimethylethanol-amine Lupragen® N 101 is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Dimethylethanolamine can be used for the synthesis of polyurethanes and as catalyst for two-component paints. N,N-Dimethylethanolamine is also used as neutralization agent in paints based on water-borne polyesters, alkyds, acrylic resins and polyurethanes. view less | |
| TRI-REZ® Polyol 1220A-300 Polyester Resin | GEO Specialty Chemicals, Inc.TRIMET Products Group | TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane...view more TRI-REZ® Polyol 1220A-300 is a 100% solids highly branched saturated polyester polyol based on TRIMET® TME (Trimethylolethane). The highly branched structure of TRI-REZ® Polyol 1220A-300 makes it an ideal choice for formulating two component, high solids polyurethane coatings and elastomers that require excellent UV and chemical resistance properties. view less | |
| N-Ethylpyrrolidone, NEP | BASF SE, Intermediates Division | N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for...view more N-Ethylpyrrolidone, NEP is a special polar solvent for cleaning of metals, glasses and plastics; for pretreating of plastics, for polyurethane dispersions and for high polar resins and resin production. N-Ethylpyrrolidone is used in plastic coatings, for water-borne coatings, and for electro insulation coatings. In many applications N-Ethylpyrrolidone can replace N-Methylpyrrolidone. view less | |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| Capromer™ PD1–20 | BASF SE, Intermediates Division | Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–20 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 2000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate view less | |
| Capromer™ PD4-05 (PolyCLO DEG550) | BASF SE, Intermediates Division | Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties i...view more Capromer™ PD4-05 (PolyCLO DEG550) is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Diethylene glycol with a molecular weight of 550. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediate. view less | |
| Capromer™ PT1–05 (PolyCLO TMP540) | BASF SE, Intermediates Division | Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of ...view more Capromer™ PT1–05 (PolyCLO TMP540) is a polycaprolactone based polyester polyol for polyurethane based coatings and adhesives. The trifunctional product is based on Trimethylolpropane a molecular weight of 540. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for the use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates view less | |
| 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 | BASF SE, Intermediates Division | 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic pai...view more 1,8-Diazabicyclo-5,4,0-undecene-7 Lupragen® N 700 is a catalyst for urethane reactions. 1,8-Diazabicyclo-5,4,0-undecene-7 is suitable for production of polyurethanes and as catalyst for two-components paints for automotive OEM, repair paints, plastic paints and paints for general application. 1,8-Diazabicyclo-5,4,0-undecene-7 is highly effective. As a liquid, it is easy to handle and shows high compatibility with resins. view less | |
| N,N-Dimethylbenzyl-amine Lupragen® N 103 | BASF SE, Intermediates Division | N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modifie...view more N,N-Dimethylbenzyl-amine Lupragen® N 103 is a catalyst for urethane reactions, for epoxy reactions and co-catalysts for radical initiated polymerization of unsaturated polyester resins. N,N-Dimethylbenzyl-amine is used to modify epoxy resins. The modified epoxy resins are used for cationic electro deposition coatings. N,N-Dimethylbenzyl-amine is used as catalyst for the production of polyurethanes (e.g. for plastic parts). view less | |
| Ethylene diamine | Univar Solutions | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | Request Sample |
| Ethylene diamine | BASF SE, Intermediates Division | Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for wa...view more Ethylene diamine is a cross linker for epoxy resins, building block for polyamides and polyurethanes. Ethylene diamine is frequently used in epoxy coatings and adhesives as well as in epoxy composites. In addition, it can be used as chain extender for waterborne polyurethane dispersions. Alkyds containing isononanoic acid are distinguished by optimal solubility and compatibility, weather- and yellowing resistance and hydrophobicity. view less | |
| Methyl Formate | Univar Solutions | Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane...view more Methyl Formate is a water-clear, quickly evaporating liquid and dissolves slowly in water. This methyl ester of formic acid is a cure agent for foundry resin using the beta-set process. It also serves as a blowing agent for a variety of polymers, specifically in polyurethane foams. It is also used as a chemical intermediate and solvent in the production of fine chemicals, fumigants, and insecticides. view less | Request Sample |
| Pripol™ 1010 | Croda Coatings & Polymers | Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, im...view more Pripol™ 1010 is a high purity hydrogenated dimer acid building block with high difunctionality for epoxy, polyurethane, polyester and polyamide coatings, adhesives and engineering plastics/elastomers. It provides good color, excellent water repellency, improved flexibility, thermo-oxidative stability, good flow and wetting properties, as well as excellent hydrolysis and chemical resistance. This product is used for adhesives & sealants, elastomers, automotive coatings, engineering plastics, advanced ceramics, and industrial coating applications. view less | |
| N,N-Diethylethanol-amine | Univar Solutions | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...view more N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. view less | Request Sample |
| N,N-Diethylethanol-amine | BASF SE, Intermediates Division | N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethy...view more N,N-Diethylethanol-amine is a catalyst for urethane reaction, neutralization agent for anionic stabilized waterborne resins. N,N-Diethylethanolamine is well suitable for the production of polyurethanes and as catalyst for two-component paints. N,N-Diethylamine is also used as neutralization agent in paints based on waterborne polyesters, alkyds, acrylic resins and polyurethanes. N,N-Diethylethanolamine offers an optimal compatibility with resins and film matrix. N,N-Diethylethanolamine supports the flow and leveling during film forming. view less | |
| DMPA® Polyol HA-0135LV2 | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersio...view more DMPA® Polyol HA-0135LV2 is a low crystalline polyester polyol with both acid and hydroxyl functionality. Like DMPA® Polyol HA-0135, this resin is designed to eliminate the need for NMP as a processing solvent in the manufacturing of polyurethane dispersions. This product offers increased hydroxyl concentration, increased coating hardness and chemical resistance. It has low crystallinity and allows for ease of handling at lower temperatures. DMPA® Polyol HA-0135LV2 has a hydroxyl value of 330-345mg KOH/g, a density @ 25°C of 1170-1200g/l, a viscosity @ 25°C of 172 poise, and a colour content (APHA) of < 250 max. view less | |
| Desmodur® I | Covestro | Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane...view more Desmodur® I is a monomeric cycloaliphatic diisocyanate. It is also known as 3-isocyanatomethyl-3, 5,5-trimethylcyclohexyl isocyanate or IPDI. It is useful as a reactive building block for the preparation of chemical products, reactive intermediates and polymers. The isocyanate groups present in Desmodur® I diisocyanate can undergo addition reactions at room temperature with compounds which contain active hydrogens, making it a valuable organic intermediate. The difference in reactivity between the isocyanate groups in Desmodur® I diisocyanate is especially useful in the preparation of polyurethane products. view less | |
| Triethylamine anhydrous | Univar Solutions | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...view more Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. view less | Request Sample |
| Triethylamine anhydrous | BASF SE, Intermediates Division | Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for ...view more Triethylamine anhydrous is a chemical compound which can be used as a catalyst for isocyanate reactions and as a neutralization agent for anionic stabilized waterborne resins. Triethylamine is used as a catalyst for the synthesis of polyurethanes and for two-component paints. Triethylamine is suitable as neutralization agent in waterborne paints based on polyesters, alkyds, acrylic resins and polyurethanes containing carboxyl or other acidic groups. Due to excellent water solubility and lack of active hydrogen atoms, triethylamine is often used for the production of water-borne polyurethane dispersions. view less | |
| 1,6-Hexanediol HDO® | BASF SE, Intermediates Division | 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automo...view more 1,6-Hexanediol HDO® is a building block for saturated polyesters and polyurethanes acrylic esters of 1,6-Hexanediol are used as reactive diluent for UV-coatings. 1,6-Hexanediol is used in polyesters for solvent-borne paints, in stoving enamels for automotive coatings, for can-& coil-coating and for general applications. It is preferentially used in two-component paints for plastic coatings and repair coatings. It is suitable for polyester plasticizers and in soft segments for polyurethanes. 1,6-Hexanediol shows an optimum balance of flexibility and toughness (excellent flexibility in combination with sufficient hardness) in polyesters and polyurethane. view less | |
| Bisomer® PPM5 LI | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g...view more Bisomer® PPM5 LI (Polypropyleneglycol Monomethacrylate) is a firmly established capping agent in urethane methacrylate oligomers for the production of photopolymer printing plates and dry film resists. This product has a hydroxyl number of 145-160mg KOH/g, a molecular weight (av) of 376g/mol, and an inhibitor (MEHQ) content of 300-500ppm. Bisomer PPM5 LI shows excellent properties in acrylic polyols for automotive OEM and refinish applications, especially flexibility and weathering properties. It is hydrophobic and offers a low Glass Transition Temperature (Tg) and low shrinkage on polymerisation. It is an excellent component in anaerobic adhesives, vacuum impregnation of aluminium castings and general sealants. This product is also a useful co-monomer in the production of vinyl, acrylic and styrene acrylic decorative paints. view less | |
| Bisomer® MPEG 350 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane...view more Bisomer® MPEG 350 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. It is water soluble and contains approximately 8 ethylene oxide (EO) units in the chain. This product has saponification value of 127-140mg KOH/g, an inhibitor (MEHQ) content of 0.45-0.55%, and a water content of 0.5% max. Bisomer® MPEG 350 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 350 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). view less | |
| Bisomer® MPEG 550 MA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane...view more Bisomer® MPEG 550 MA (Methoxy Polyethyleneglycol Metha-crylate) is a long chain methacrylate monoester based on an ethylene oxide backbone. This product has a saponification value of 85-95mg KOH/g, an inhibitor (MEHQ) content of 0.15-0.20%, and a molecular weight (av) of 628g/mol. Bisomer® MPEG 550 MA is an excellent material to impart water solubility or water dispersibility into non-ionic organic molecules. It is also an excellent flexibilising molecule due to its low Glass Transition Temperature (Tg). Bisomer® MPEG 550 MA is ideal in water-based automotive coatings, alkyd dispersions, polyurethane dispersions (PUDs), soil stabilising hydrogels, flocculating agents, anaerobic adhesives and water-based pressure sensitive adhesives (PSAs). Bisomer® MPEG 550 MA is non-toxic and a liquid at ambient temperature. view less | |
| Nippollan 4002 | Tosoh Corporation | Nippollan 4002, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4040 | Tosoh Corporation | Nippollan 4040, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4009 | Tosoh Corporation | Nippollan 4009, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4010 | Tosoh Corporation | Nippollan 4010, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 3027 | Tosoh Corporation | Nippollan 3027, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 164 | Tosoh Corporation | Nippollan 164, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4073 | Tosoh Corporation | Nippollan 4073, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 136 | Tosoh Corporation | Nippollan 136, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 141 | Tosoh Corporation | Nippollan 141, in the form of a yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 4042 | Tosoh Corporation | Nippollan 4042, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5018 | Tosoh Corporation | Nippollan 5018, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 5035 | Tosoh Corporation | Nippollan 5035, in the form of a white solid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 152 | Tosoh Corporation | Nippollan 152, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 1004 | Tosoh Corporation | Nippollan 1004, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. | |
| Nippollan 163 | Tosoh Corporation | Nippollan 163, in the form of a pale yellow liquid, is a polyester polyol for elastomers. It has applications in coatings, TPU (thermos set urethanes), adhesives, and more. |
