| VINNAPAS® 5021 T | Wacker Chemical Corporation | VINNAPAS® 5021 T is a thixotropic product with good adhesion and water resistance. | Request Sample |
| Cimsil G50 | Tolsa, S.A. | Cimsil G50 is a thixotropic and shear thinning additive. It is developed as an anti-sagging agent in gypsum systems. It can be used for gypsum spray plasters, gypsum compounds, and gypsum based adhesives. | |
| CHS-Alkyd ST 551 N 50 | Spolchemie | CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has...view more CHS-Alkyd ST 551 N 50 is a binder for thixotropic solvent borne coatings that is medium length oil. This alkyd resin is an air-drying resin that is made from soybean oil and polyamide. 50% of the solution is delivered in de-aromatized white spirit. It has as gel like structure, the aromatic content is less than 1 percent. This product is primarily used for air-drying thixotropic synthetic paints that are used for interiors and exteriors as penetrates and lacquers. It is used to prevent pigment and fillers from settling in synthetic paints. view less | |
| Epoxies® 50-3186 NC | Epoxies, Etc. | Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal e...view more Epoxies® 50-3186 NC is a two part thermally conductive epoxy adhesive. This thixotropic adhesive provides high temperature bonds to a variety of substrates. 50-3186 NC is a perfect choice for applications requiring high thermal conductivity, low thermal expansion, and high operating temperature performance. view less | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...view more CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. view less | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...view more R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. view less | |
| Epoxies® 10-2055I | Epoxies, Etc. | Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055I is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| Epoxies® 10-2055P | Epoxies, Etc. | Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055P is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| Epoxies® 10-2055PHV | Epoxies, Etc. | Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2055PHV is a light amber semi flexible polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2055PHV produces a consistency similar to grease with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| Epoxies® 10-2080I | Epoxies, Etc. | Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080I is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080I produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| Epoxies® 10-2080P | Epoxies, Etc. | Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080P is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080P produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| Epoxies® 10-2080PHV | Epoxies, Etc. | Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotrop...view more Epoxies® 10-2080PHV is a light amber semi rigid polyurethane adhesive. Primarily used for bonding a wide variety of plastics and metal substrates with high coefficients of thermal expansion (CTE) and substrates with different CTE's. Epoxies® 10-2080PHV produces a consistency similar to honey with low viscosity handling characteristics and turns thixotropic upon mixing. view less | |
| CN2273 | Sartomer Americas | CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithograp...view more CN2273 is designed for very fast cure response in inks and coatings. This polyester acrylate has low viscosity and flexibility with good pigment wetting characteristics. The unique structure provides natural thixotropic properties for screen and lithographic inks. Its flexibility, low viscosity, and fast surface cure speed make CN2273 suitable for overprint varnishes and coatings requiring low odor. view less | |
| CN2271E | Sartomer Americas | CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oli...view more CN2271E is designed to provide a higher UV cure rate than CN2270. Use of this oligomer with epoxy and urethane acrylates results in inks which behave thixotropically. CN2271E is ideal for high TiO2 dispersions. It can produce Newtonian like inks. This oligomer is perfect for diluting epoxy acrylates, improving adhesion, and increasing the cure rate. Recommended uses are coatings, flexo, gravure and offset inks. view less | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
| Valida L,3% | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
| Valida S191C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
| Valida S231C | Sappi Biotech | Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less | |
| Crestomer® 1152PA | Scott Bader | Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because o...view more Crestomer® 1152PA is a two part pre-accelerated structural adhesive that is highly thixotropic and is based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion to core materials, wood, FRP laminates and some metals and because of its good adhesion properties, Crestomer® 1152PA can be recommended for use as a general purpose adhesive. It can also be used to bond contour joints in FRP components, to bond diesel tanks as well as bonding damaged areas or "green" FRP. view less | |
| UV Cure 60-7158 | Epoxies, Etc. | UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotrop...view more UV Cure 60-7158 is a UV curable epoxy adhesive formulated to bond rigid substrates. This adhesive bonds extremely well to aluminum while also providing good water and chemical resistance. UV Cure 60-7158 is a semi-rigid adhesive and it is well suited for bonding rigid substrates. It is thixotropic and will not run once applied to the substrate. UV Cure 60-7158 does not contain any solvents, has little shrinkage and provides a smooth non-sticky surface. view less | |
| Crestomer® 1150PA | Scott Bader | Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good...view more Crestomer® 1150PA is a highly thixotropic structural adhesive that is pre-accelerated and based on unsaturated urethane acrylate in styrene monomer. It displays good adhesion and high elongation at break, shows no sagging on vertical surfaces and has good fatigue and impact resistance properties. Crestomer® 1150PA is mostly used in structural composite applications and has good adhesion to FRP laminates, wood and some metals as well as core materials. Crestomer® 1150PA can be used for bonding diesel tanks and contour joints in FRP components. view less | |
| Crestomer® 1153PA | Scott Bader | Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP lamina...view more Crestomer® 1153PA is a structural adhesive that is highly thixotropic and derived from unsaturated urethane acrylate in styrene monomer. The adhesive has a long open time of 90 minutes and shows good adhesion to core materials, metals, wood and FRP laminates. Because of its good adhesion properties, Crestomer® 1153PA is ideal for use as a general purpose adhesive. The adhesive is also used to contour joints in FRP components, to bond "green" FRP and to build up damaged areas. Crestomer® 1153PA is mainly used in structural composite applications. view less | |
| Jaylink® 106E | Bomar, formerly Dymax Oligomers & Coatings | Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotrop...view more Jaylink® 106E polymerizable cellulosic is an acrylamidomethyl-substituted cellulose ester polymer. Due to its high degree of acrylamide substitution, formulations using JL-106E cure very rapidly in response to UV/EB. Resulting films have excellent abrasion, chemical, and impact resistance. The hydrophobic and hydrophilic segments of 106E make it an excellent compatibilizer for materials of differing polarity. JL-106E is used for its thixotropic characteristics, which are particularly useful in improving UV ink holdout on porous substrates, without sacrificing cured properties. This material is INCI listed for use in the cosmetic industry. view less | |
| Crystic® Scottbond 102PA White | Scott Bader | Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is...view more Crystic® Scottbond 102PA White is a white-colored pourable adhesive paste that is from a specially selected unsaturated polyester resin that is pre-accelerated to offer a convenient working time. The resin-based adhesive has a thixotropic polyester and is meant for bonding GRP to rigid polyurethane foam in sandwich panel systems. Crystic® Scottbond 102PA is also used to bond GRP to plywood and plywood to polyurethane foam. It is designed to ensure ease of application and spreads easily under pressure, presenting a smoother surface in the finished product. However, it should not soak or drain too much into the polyurethane foam. Some penetration is necessary to ensure adhesion. view less | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotrop...view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less |
