UL Prospector

Success!

Successfully saved your search
1488 VT/OIL Copolymer Resin Gabriel Performance Products 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less
Acronal® NX 2727 na BASF Dispersions & Resins Acronal® NX 2727 na is an aqueous anionic dispersion of a polymer based on acrylic ester and styrene. It can be used as a primer coating to bind fine surface dust on composite substrates.
Akuabrid CRA 1610 T&L Co., Ltd. Polymer Technology Centre Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and ...view more Akuabrid CRA 1610 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less
Akuabrid PH 1200 T&L Co., Ltd. Polymer Technology Centre Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and w...view more Akuabrid PH 1200 is a liquid, waterborne polyurethane-acrylic dispersion mixed at the molecular level. This product displays good corrosion resistance and adhesion and is especially well-suited for phosphate-based AUD applications in plastic, metal, and wood coatings and adhesives. view less
BYD2600 Tianyi Chemical Engineering Material Co., Ltd. BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, an...view more BYD2600, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in pressure-sensitive adhesive tape applications, particularly for polypropylene films. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. view less
BYD3102 Tianyi Chemical Engineering Material Co., Ltd. BYD3102, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in non-woven fabric adhesives. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements.
Baybond® PU 130 Covestro Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers u...view more Baybond® PU 130 has anionic/non-ionic crosslinking polyether urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, and is useful for the sizing of glass fibers used to reinforce thermoplastics, especially polyamide. Glass fiber sizes based on Baybond® PU 130 have excellent filmforming properties and adhesion. This product also exhibits very good colorfastness at high temperatures and is also highly resistant to hydrolysis. Full mechanical properties of Baybond® PU 130 are developed by post-crosslinking for 20 minutes @ 170C. As with any product, use of Baybond® PU 130 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less
Baybond® PU 330 Covestro Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...view more Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less
Baybond® PU 401 A Covestro Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have ex...view more Baybond® PU 401 A has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. Commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on its polyurethane dispersion have excellent film-forming properties and very good adhesion. As with any product, use of Baybond® PU 401 A polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less
Baybond® PU 402 A Covestro Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based o...view more Baybond® PU 402 A has anionic/non-ionic polyester urethane polymer used as the film-forming component in glass fiber sizes. It was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 402 A are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. Baybond® PU 402 A is also very stable against shear forces. As with any product, use of Baybond® PU 402 A in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability view less
Baybond® PU 403 Covestro Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond...view more Baybond® PU 403 has anionic, non-ionic polyester urethane polymer, used as the film forming component in glass fiber sizes. Its polyurethane disperson is commonly used as the film-forming component in glass fiber sizing. Glass fiber sizes based on Baybond PU® 403 have excellent film-forming properties, and very good adhesion. The mechanical properties of Baybond® PU 403 are improved by post-curing at 150ºC or above for 30 minutes. As with any product, Baybond® PU 403 polyurethane dispersion in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less
Bayhydrol® UV 2280 Covestro Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking,...view more Bayhydrol® UV 2280 is a urethane acrylate dispersion. It is supplied as approximately 39% solids dispersion in water. It may be used in the formulation of aqueous UV-curing coatings, especially for applica- tion on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1.0 to 2.5% by weight photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. view less
Bitoner® Resin TR-100 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended appli...view more Bitoner® Resin TR-100, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat stability, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. view less
Bitoner® Resin TR-2080 Qingdao Bater Chemical Co., Ltd. Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended app...view more Bitoner® Resin TR-2080, in the form of a slightly yellow granular, is thermoplastic, low molecular weight, C9 and C5 co-polymerized resin. It has low odor, low volatility, good heat resistance, good compatibility, water resistance, and has recommended applications in sealants, coatings, hot melt adhesives, PSA, and rubber compounds. view less
CN104A75 Sartomer Americas CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...view more CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. view less
CN120Z Sartomer Americas CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...view more CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less
CN293 Sartomer Americas CN293 is a hexafunctional acrylated polyester oligomer that demonstrates good pigment wetting and fast cure response. CN293 is recommended for use in lithographic and flexographic ink formulations, as well as abrasion resistant coatings.
CN307 Sartomer Americas CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated int...view more CN307 is a hydrophobic acrylate ester. CN307 demonstrates excellent flexibility, water resistance and chemical resistance. It is used in UV/EB-coatings, electronics, and photopolymers. CN307 is based on high vinyl polybutadiene and may be incorporated into peroxide cured natural and synthetic rubber systems, where it improves mechanical and performance properties. view less
CN9302 Sartomer Americas CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture c...view more CN9302 is a urethane acrylate oligomer bearing both acrylate and isocyanate (NCO) functionality. It can be used in UV/EB curable, two-part urethane and dual cure formulations. In UV/EB formulations the reactive isocyanate allows for secondary moisture cure of shadowed areas for enhanced coating performance. view less
Request Sample DEGACRYL® HS 4150 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less
Request Sample DEGACRYL® HS 4220 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyet...view more DEGACRYL® HS 4220 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4220 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less
Request Sample DEGACRYL® HS 4221 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4221 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. view less
Request Sample DEGACRYL® HS 4250 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...view more DEGACRYL® HS 4250 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4250 E will achieve good adhesion to aluminium in formulation with PVC-copolymer. Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® VP 4250 E has a higher solid content compared to the equivalent grade DEGACRYL® 4150 E. view less
Request Sample DEGACRYL® HS 4251 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), poly...view more DEGACRYL® HS 4251 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. DEGACRYL® HS 4251 E is applied as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). Primed with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4251 E has a higher solid content compared to the equivalent grade DEGACRYL® HS 4151 E. view less
Request Sample DEGACRYL® HS 4294 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polysty...view more DEGACRYL® HS 4294 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. It is suitable as an universal binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polylactic acid (PLA) or vinyl (PVC). Due to narrow molecular weight distribution, rub-off deposits can be minimized which leads to higher productivity. Additionally, DEGACRYL® HS 4294 E has a high solid content of 52%. view less
Request Sample DEGACRYL® HS 4322 E Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for tra...view more DEGACRYL® HS 4322 E is an organic dispersion of copolymers on methacrylic esters, olefins and polyesters basis. DEGACRYL® HS 4322 E achieves direct adhesion on aluminium and PET. Due to its low haze properties when dry coated, it is ideally suited for transparent applications. General usage is as a binder in PVC-free heat seal lacquers for sealing aluminium foil or PET film versus polystyrene (PS), polyethylene terephthalate (PET), poly lactic acid (PLA) and polyvinyl chloride (PVC). view less
Request Sample DEGACRYL® HS 555 Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less
Request Sample DEGACRYL® HS 666 Evonik Operations GmbH, BL Coating & Adhesive Resins DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene ...view more DEGACRYL® HS 666 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less
Desmodur® HL BA Covestro Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of...view more Desmodur® HL BA is an aliphatic/aromatic polyisocyanate copolymer based on toluene diisocyanate (TDI) and and hexamethylene diisocyanate (HDI) and dissolved in n-butyl acetate. Used in the formulation of fast-drying two-component coatings. Drying times of coatings using Desmodur® HL BA are considerably shorter than those of coatings based on Desmodur® CB polyisocyanates and somewhat longer than those based on Desmodur® IL polyisocyanate. view less
Flexipel S-11WS Innovative Chemical Technologies, Inc. Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in ...view more Flexipel S-11WS, in the form of a colorless to light yellow liquid, is a solvent soluble, partially fluorinated surface protectant acrylic copolymer. It can be used in grouts, concrete, stone, tile or wood deck applications. This product is insoluble in water and has a boiling point of approximately 320 degrees Fahrenheit. view less
Flexipel S-22WS Innovative Chemical Technologies, Inc. Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This prod...view more Flexipel S-22WS, in the form of a colorless to light yellow liquid, is a partially fluorinated acrylic copolymer that can be used in canvas, wood and decking, concrete, stone, tile and grout sealers and paint and coatings for metallic surfaces. This product is insoluble in water and has a mild odor. Its boiling point is approximately 320 degrees Fahrenheit, and contains 22-23% solids. view less
Request Sample GENOMER* 2235 Rahn USA Corp. GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product...view more GENOMER* 2235 is a low viscosity, aliphatic epoxy diacrylate resin for radically curable inks, coatings and adhesives. It can be used in the following applications: overprint varnishes, wood coatings, flexo inks, gravure inks and ink jet inks. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less
Request Sample GENOMER* 2252 Rahn USA Corp. GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpr...view more GENOMER* 2252 is a Bisphenol A epoxy diacrylate. It is a resin for radically curable inks, coatings and adhesives. It can be used in the following applications: lithographic inks and varnishes; screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings and adhesives. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less
Request Sample GENOMER* 2252/GP20 Rahn USA Corp. GENOMER* 2252/GP20 is a Bisphenol A epoxy diacrylate in 20% GPTA. It is a resin for radically curable inks, coatings and adhesives.
Request Sample GENOMER* 2252/GP25 Rahn USA Corp. GENOMER* 2252/GP25 is a Bisphenol A epoxy diacrylate in 25% GPTA. It is a resin for radically curable inks, coatings and adhesives.
Request Sample GENOMER* 2252/HD20 Rahn USA Corp. GENOMER* 2252/HD20 is a Bisphenol A epoxy diacrylate in 20% HDDA. It is a resin for radically curable inks, coatings and adhesives. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers.
Request Sample GENOMER* 2252/TM20 Rahn USA Corp. GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TM20 is a Bisphenol A epoxy diacrylate in 20% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less
Request Sample GENOMER* 2252/TM40 Rahn USA Corp. GENOMER* 2252/TM40 is a Bisphenol A epoxy diacrylate in 40% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TM40 is a Bisphenol A epoxy diacrylate in 40% TMPTA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less
Request Sample GENOMER* 2252/TP20 Rahn USA Corp. GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP20 is a Bisphenol A epoxy diacrylate in 20% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less
Request Sample GENOMER* 2252/TP30 Rahn USA Corp. GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP30 is a Bisphenol A epoxy diacrylate in 30% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less
Request Sample GENOMER* 2252/TP40 Rahn USA Corp. GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks;...view more GENOMER* 2252/TP40 is a Bisphenol A epoxy diacrylate in 40% TPGDA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: screen inks and varnishes; flexo inks and varnishes; letterpress inks; coatings for paper board and plastics; wood coatings; and adhesives. view less
Request Sample GENOMER* 2253 Rahn USA Corp. GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and v...view more GENOMER* 2253 is a modified epoxy acrylate resin. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is used in the following applications: letterpress inks, flexo inks and varnishes, screen inks and varnishes, and varnishes for paper, board and plastics. view less
Request Sample GENOMER* 2255 Rahn USA Corp. GENOMER* 2255 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: offset inks and varnishes, letterpress inks, screen inks and varnishes, flexo inks and ...view more GENOMER* 2255 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: offset inks and varnishes, letterpress inks, screen inks and varnishes, flexo inks and varnishes, coatings for paper, board and plastics, and wood coatings. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less
Request Sample GENOMER* 2259 Rahn USA Corp. GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the...view more GENOMER* 2259 is a modified epoxy acrylate resin. It is a resin for radically curable inks, coatings and adhesives. The product is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is used in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; coatings for paper, board and plastics; and wood coatings. view less
Request Sample GENOMER* 2263 Rahn USA Corp. GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, scr...view more GENOMER* 2263 is a vinylester resin. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high stress at break and high e-modulus. GENOMER* 2263 is typically applied in offset inks and varnishes, letterpress inks, screen inks and varnishes, and wood plastic, and paper coatings. view less
Request Sample GENOMER* 2280 Rahn USA Corp. GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...view more GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. view less
Request Sample GENOMER* 3364 Rahn USA Corp. GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coat...view more GENOMER* 3364 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. view less
Request Sample GENOMER* 3414 Rahn USA Corp. GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; ...view more GENOMER* 3414 is a modified polyether acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes; screen inks and varnishes; overprint varnishes; wood coatings; and printing inks and varnishes for plastic foils. view less
Request Sample GENOMER* 3430 Rahn USA Corp. GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured w...view more GENOMER* 3430 is an amine modified polyether acrylate. Formulations containing GENOMER* 3430 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 3430 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less
Request Sample GENOMER* 3457 Rahn USA Corp. GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and var...view more GENOMER* 3457 is a moderate viscosity product with high reactivity, good scratch and solvent resistance, medium flexibility and excellent adhesion to a variety of substrates. It is recommended for coatings for wood, paper, metal and plastics; inks and varnishes, industrial coatings and adhesives, and additive manufacturing applications. view less
Request Sample GENOMER* 3480 Rahn USA Corp. GENOMER* 3480 is a modified polyether acrylate resin with utility in UV and EB free radical inks, coatings and adhesives. It has good flexibility, excellent reactivity, high and gloss, high abrasion and solvent resistance, low odor, and low color/low yell...view more GENOMER* 3480 is a modified polyether acrylate resin with utility in UV and EB free radical inks, coatings and adhesives. It has good flexibility, excellent reactivity, high and gloss, high abrasion and solvent resistance, low odor, and low color/low yellowing post-cure. This product is recommended for coatings for wood, paper, metal, and plastics; screen inks and varnishes, flexo inks and varnishes, and printing inks and varnishes for plastic foils. view less
Request Sample GENOMER* 3497 Rahn USA Corp. GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coat...view more GENOMER* 3497 is a modified polyetherpolyol acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: flexo inks and varnishes, screen inks and varnishes, overprint varnishes, wood coatings, printing inks and varnishes for plastic foils and protective coatings for metals. view less
Request Sample GENOMER* 3611 Rahn USA Corp. GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigme...view more GENOMER* 3611 is a fatty acid modified polyester acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where high reactivity and good pigment wetting are required. Properties include very good pigment wetting, high reactivity, good scratch and solvent resistance, high abrasion resistance, and very good lithographic behavior. This product is used in flexo inks and varnishes, as well as in offset inks and varnishes. view less
Request Sample GENOMER* 4188/EHA Rahn USA Corp. GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industr...view more GENOMER* 4188/EHA is a monofunctional urethane acrylate in EHA. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less
Request Sample GENOMER* 4188/M22 Rahn USA Corp. GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives a...view more GENOMER* 4188/M22 is a monofunctional urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: adhesives, pressure sensitive adhesives, laminating adhesives and industrial adhesives. view less
Request Sample GENOMER* 4205 Rahn USA Corp. GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives.
Request Sample GENOMER* 4212 Rahn USA Corp. GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of f...view more GENOMER* 4212 is an aliphatic polyester urethane . It is a resin for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4212 are soft, flexible and non-yellowing. GENOMER* 4212 can be used as a modifier to improve the flexibility of finished formulations. view less
Request Sample GENOMER* 4215 Rahn USA Corp. GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PV...view more GENOMER* 4215 is an aliphatic Polyester Urethane Acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC,PE etc.); PVC flooring; adhesives; and plastic varnishes. view less
Request Sample GENOMER* 4215/M22 Rahn USA Corp. GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic fo...view more GENOMER* 4215/M22 is an aliphatic polyester urethane acrylate in GENOMER* 1122. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes for plastic foils (PVC, PE etc.); PVC flooring; industrial coatings and adhesives; and plastic varnishes. view less
Request Sample GENOMER* 4217 Rahn USA Corp. GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulati...view more GENOMER* 4217 is a flexible aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. It is recommended for applications where adhesion and flexibility are required. GENOMER* 4217 is used in flexible and tough formulations producing strong, but still flexible films. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastic and metal; wood coatings; flexo inks; and screen inks. view less
Request Sample GENOMER* 4230 Rahn USA Corp. GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulat...view more GENOMER* 4230 is a difunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. Cured films of GENOMER* 4230 are soft, flexible and non-yellowing. It can be used as a modifier to improve the flexibility of finished formulations. This product is recommended for use in the following applications: coatings for metal and plastic; printing inks; laminating adhesives; and peroxide curing. view less
Request Sample GENOMER* 4247 Rahn USA Corp. GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low...view more GENOMER* 4247 is a 2-functional aliphatic urethane methacrylate for radically curable coatings. It has high hardness, high scratch and abrasion resistance, and high transparency, clarity, and gloss. It has low yellowing characteristics, good adhesion, low viscosity, and medium-high reactivity. This product provides films with exceptional hardness and good mechanical properties. It is recommended for clear and pigmented coatings. view less
Request Sample GENOMER* 4256 Rahn USA Corp. GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...view more GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. view less
Request Sample GENOMER* 4259 Rahn USA Corp. GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...view more GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. view less
Request Sample GENOMER* 4267 Rahn USA Corp. GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are req...view more GENOMER* 4267 is an aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4267 is recommended for applications where both high flexibility combined with the toughness expected of urethane acrylates are required. The product is used in combination with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. This product is recommended for use in the following applications: non-yellowing industrial coatings; coatings for automotive applications and mobile phones; printing inks and varnishes; adhesives; and flexibilizer for corrosion-resistant systems. view less
Request Sample GENOMER* 4269/M22 Rahn USA Corp. GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and var...view more GENOMER* 4269/M22 is an aliphatic urethane acrylate in GENOMER* 1122. It is a resin for radically curable coatings and adhesives. This product is recommended for use in the following applications: adhesives; laminating adhesives; and printing inks and varnishes for plastic foils (PVC, PE etc.). The cured oligomer provides excellent mechanical properties. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less
Request Sample GENOMER* 4277 Rahn USA Corp. GENOMER* 4277 is an aliphatic urethane acrylate. It is a resin for radically coatings. It provides high flexibility and toughness, good adhesion, and high viscosity.
Request Sample GENOMER* 4297 Rahn USA Corp. GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...view more GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. view less
Request Sample GENOMER* 4302 Rahn USA Corp. GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen an...view more GENOMER* 4302 is an aliphatic polyester triurethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: non yellowing coatings for plastics; non yellowing screen and decor varnishes; paper and board coatings premiums; and industrial coatings. The product provides outstanding weatherability and mechanical properties. The product is used as the sole oligomer or in association with other urethane acrylates and acrylate monomers. view less
Request Sample GENOMER* 4312 Rahn USA Corp. GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and pla...view more GENOMER* 4312 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; varnishes for paper, board and plastics; wood and industrial coatings; and adhesives. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less
Request Sample GENOMER* 4316 Rahn USA Corp. GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood an...view more GENOMER* 4316 is an aliphatic polyester urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: printing inks and varnishes; paper and board varnishes; wood and industrial coatings; and plastic varnishes. Excellent reactivity and non yellowing is achieved with GENOCURE* MBF as a photoinitiator. view less
Request Sample GENOMER* 4335 Rahn USA Corp. GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be...view more GENOMER* 4335 is a hydroxy functional aliphatic urethane acrylate. This resin is recommended for radically curable inks, coatings and adhesives. It offers low yellowing, improved adhesion, and very good scratch and chemical resistance. This product can be used for automotive coatings, industrial coatings, and outdoor applications. view less
Request Sample GENOMER* 4425 Rahn USA Corp. GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are require...view more GENOMER* 4425 is a low viscosity, aliphatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. GENOMER* 4425 is recommended for application where adhesion, low yellowing, exterior durability and low viscosity are required. This product is recommended for use in the following applications: overprint varnishes; industrial coatings on plastics and metal; wood coatings; flexo inks; and screen inks. view less
Request Sample GENOMER* 4514 Rahn USA Corp. GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and...view more GENOMER* 4514 is an amine modified aromatic urethane acrylate. Formulations containing GENOMER* 4514 cure rapidly with UV/LED (at e.g. 365/385/395nm), without adding additional amine synergist. GENOMER* 4514 in combination with Type II photoinitiators and cured with a standard UV lamp provides rapid cure speed and improved surface cure. view less
Request Sample GENOMER* 4590/PP Rahn USA Corp. GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks ...view more GENOMER* 4590/PP is a urethane acrylate in GENOMER 1456 (PPTTA). It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: offset inks and varnishes; letterpress inks; screen inks and varnishes; and wood and industrial coatings. The low viscosity in combination with the high functionality allows for an easy product handling. view less
Request Sample GENOMER* 4622 Rahn USA Corp. GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used ...view more GENOMER* 4622 is an aromatic urethane acrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: wood coatings; offset inks; and industrial coatings. It is typically used in concentrations from 5 up to 50% in association with urethane, polyester or epoxy acrylates. view less
Request Sample GENOMER* 4690 Rahn USA Corp. GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems whe...view more GENOMER* 4690 is a hexafunctional aliphatic urethane acrylate for radically curable inks, coatings and adhesives. It can be used as an additive to improve cure speed, solvent resistance and abrasion resistance. GENOMER* 4690 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required. This product is specifically recommended for use in the following applications: hard coats on plastic; top coats on wood; and coatings on paper, board, wood and plastics. view less
Request Sample GENOMER* 4691 Rahn USA Corp. GENOMER* 4691 is an aliphatic urethane hexaacrylate. GENOMER* 4691 is recommended for systems where outstanding hardness, scratch and abrasion resistance, chemical resistance, and low yellowing are required.
Request Sample GENOMER* 7302 Rahn USA Corp. GENOMER* 7302 is a mercaptan-modified polyether acrylate. Formulations containing GENOMER* 7302 can be readily cured with UV LED, UVA or low energy UV lamps. This product reduces oxygen inhibition of the free radical curing process and improves surface cu...view more GENOMER* 7302 is a mercaptan-modified polyether acrylate. Formulations containing GENOMER* 7302 can be readily cured with UV LED, UVA or low energy UV lamps. This product reduces oxygen inhibition of the free radical curing process and improves surface cure without increasing odor. view less
Request Sample GENOMER* 7311 Rahn USA Corp. GENOMER * 7311 is completely water-soluble prior to cure. Recommended applications are additive manufacturing, coatings for wood, paper, metal and plastics, water-based inks and varnishes.
Request Sample HYBRIDUR® 580 Polymer Dispersion Evonik Operations GmbH, BL Crosslinkers HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...view more HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. view less
Licocene® PP 1302 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1302 granules is a low melting, metallocene-technology based propylene-ethylene copolymer wax, which exhibits a low degree of crystallinity.
Licocene® PP 1502 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1502 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.
Licocene® PP 1602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 1602 granules is a low melting, metallocene-technology based propylene-ethylene copolymer, which exhibits a low degree of crystallinity.
Licocene® PP 2502 granules TP Clariant Plastics & Coatings Ltd. Licocene® PP 2502 granules TP is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
Licocene® PP 2602 fine grain TP Clariant Plastics & Coatings Ltd. Licocene® PP 2602 fine grain TP is a low crystalline metallocene-technololgy based propylene-ethylene-copolymer.
Licocene® PP 2602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 2602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
Licocene® PP 3602 granules Clariant Plastics & Coatings Ltd. Licocene® PP 3602 granules is a low crystalline metallocene-technology based propylene-ethylene-copolymer.
M35/73 Solution Synthomer M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, s...view more M35/73 Solution is a copolymer of vinyl acetate and dibutyl maleate dissolved in ethyl acetate in a colorless solution form. This product has a total solid content of 59-61% and a density of 1.05 g/cm3. M35/73 Solution is most commonly used in primer, sealer, binder, and heat seal adhesive formulation applications. view less
MCT5 Synthomer MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali...view more MCT5 is a low molecular weight, solid copolymer of vinyl acetate and crotonic acid. This product has a total solids content of greater than 99% and a viscosity of 7-13 mPa.s. MCT5 is most commonly used in solvent-based adhesive and ink, as well as alkali removable coating applications. view less
Request Sample MIRAMER M140 Rahn USA Corp. MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks...view more MIRAMER M140 is a polyether acrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: adhesives; industrial coatings; flexo inks; screen inks; and gravure inks. It exhibits low volatility, good flexibility, good adhesion and low shrinkage. view less
Mowinyl 6720 Nippon Gohsei Mowinyl 6720 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to films and topcoats, this product is well suited for use in primer and sealer applications.
Mowinyl 880 Nippon Gohsei Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications.
Mowinyl 940 Nippon Gohsei Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications.
Request Sample POLYESTER ACRYLATE 03-849 Rahn USA Corp. POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in print...view more POLYESTER ACRYLATE 03-849 is a polyester acrylate resin for radically curable inks, coatings and adhesives. The product provides good adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. It is recommended for use in printing inks and varnishes, overprint varnishes, plastic coatings and wood and industrial coatings. view less
PRO13471 Sartomer Americas PRO13471 is a tailored, engineered resin blend featuring proprietary block copolymer technology. It is designed to create a fully integrated polymeric network with soft rubbery domains.
PRO13944 Sartomer Americas PRO13944 is a high molecular weight, difunctional polyether urethane-acrylate. On cure, it can undergo a phase separation process to improve toughness of some formulations.
PVP/VA28W Shanghai WellTone Material Technology Co., Ltd. PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and vis...view more PVP/VA28W is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 16-22 and a total solids content of 48-52%. PVP/VA28W is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less
PVP/VA37E Shanghai WellTone Material Technology Co., Ltd. PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and vis...view more PVP/VA37E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32 and a total solids content of 48-52%. PVP/VA37E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less
PVP/VA55E Shanghai WellTone Material Technology Co., Ltd. PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is...view more PVP/VA55E is a copolymer of vinylpyrrolidone and vinylacetate in a colorless to slight yellow-colored, transparent liquid form. This product has a K value of 24-32, a moisture content of less than 0.5%, and a total solids content of 48-52%. PVP/VA55E is most commonly used as a binder and viscosity-enhancing agent in paper adhesive, coating, and printing ink applications. view less