UL Prospector

Success!

Successfully saved your search
112 Results
ADH (ADIPIC DIHYDRAZIDE) KH Neochem Americas, Inc. Crosslinking agent for self crosslinking emulsion resins using DAAM.
Baybond® XL 825 Covestro Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less
Bayhydur® 304 Covestro Bayhydur® 304 is a hydrophilically modified, aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It is primarily used as the crosslinker for aqueous polyol binders (Bayhydrol).
Bayhydur® BL XP 2706 Covestro Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate. Form supplied is approximately 40% in water (neutralized with 2.8 pts. dimethyl ethanol amine). It is used primarily in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast, one-component polyurethane baking coatings. It is also used as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less
Bayhydur® XP 2547 Covestro Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins s...view more Bayhydur® XP 2547 is a water-dispersible polyisocyanate based on hexamethylene diisocyanate (HDI). It is a solvent-free crosslinking agent for two-component waterborne polyurethane coatings. Suitable coreactants are hydroxyl-functional waterborne resins such as Bayhydrol® XP 2542. view less
Bayhydur® XP 2700 Covestro Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applica...view more Bayhydur® XP 2700 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Form supplied is approximately 65% in dipropylene glycol dimethyl ether. It is a crosslinker for aqueous coatings, developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less
Capa™ 4101 Univar Solutions Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility...view more Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility and highcross-linking density are required. view less Request Sample
Capa™ 4101 Perstorp Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility...view more Capa™ 4101 is a tetra-functional polyol terminated with primary hydroxyl groups. It has a molecular weight of 1000 and a typical OH value of 218 mg KOH/g. Capa™ 4101 is a clear liquid developed for production of high solids coatings where both flexibility and highcross-linking density are required. view less
CN9102 Sartomer Americas CN9102 is a 100% reactive, allylic functional aliphatic oligomer. CN9102 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. Suggested applications i...view more CN9102 is a 100% reactive, allylic functional aliphatic oligomer. CN9102 can be used in low temperature or photocured free radical polymerizations as a latent initiator or crosslinker to overcome surface tack due to air inhibiton. Suggested applications include: adhesives and peroxide cure adhesives, cast polymers, coatings and high solids peroxide cure coatings, composites, and open molding composites. view less
DMS-H03 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
DMS-H11 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
DMS-H21 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
DMS-H25 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
DMS-H31 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
DMS-H41 Gelest, Incorporated Hydride terminated polydimethylsiloxane. Request Sample
Dynasylan® AMEO Evonik Operations GmbH, BL Silanes Dynasylan® AMEO is a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) a...view more Dynasylan® AMEO is a bifunctional silane possessing a reactive primary amino group and hydrolyzable ethoxysilyl groups. The dual nature of its reactivity allows Dynasylan® AMEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers) thus functioning as an adhesion promoter, crosslinker, and/or surface modifier. Dynasylan® AMEO is a colorless to slightly yellowish low-viscosity liquid with an amine-like odor. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. In addition Dynasylan® AMEO is completely and immediately soluble in water (with reaction). view less
Dynasylan® GLYEO Evonik Operations GmbH, BL Silanes Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, ...view more Dynasylan® GLYEO is a bifunctional organosilane possessing a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. The dual nature of its reactivity allows Dynasylan® GLYEO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYEO is a colorless low-viscosity liquid with a slight terpentine-like odor. It is soluble in alcohols, ketones and aliphatic and aromatic hydrocarbons. view less
Dynasylan® GLYMO Evonik Operations GmbH, BL Silanes Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, met...view more Dynasylan® GLYMO is a bifunctional organosilane possessing a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. The dual nature of its reactivity allows Dynasylan® GLYMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent and/or surface modifier. Dynasylan® GLYMO is a colorless low-viscosity liquid with a slight terpentine-like odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons. view less
Dynasylan® MEMO Evonik Operations GmbH, BL Silanes Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic h...view more Dynasylan® MEMO is a methacrylfunctional silane that can be used as adhesion promoter, surface modifier, co-monomer for polymer synthesis and crosslinker. Dynasylan® MEMO is a clear, colorless liquid. It is soluble in alcohols, and aliphatic or aromatic hydrocarbons. view less
Dynasylan® MTMO Evonik Operations GmbH, BL Silanes Dynasylan® MTMO is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. The dual nature of its reactivity allows Dynasylan® MTMO to bind chemically to both inorganic materials (e.g. glass, met...view more Dynasylan® MTMO is a bifunctional organosilane possessing a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. The dual nature of its reactivity allows Dynasylan® MTMO to bind chemically to both inorganic materials (e.g. glass, metals, fillers) and organic polymers (e.g. thermosets, thermoplastics, elastomers), thus functioning as an adhesion promoter, crosslinking agent, surface modifier or reactive reagent. Dynasylan® MTMO is a clear, colorless to light yellow liquid with a slightly mercaptan odor. It is soluble in alcohols, ketones and aliphatic or aromatic hydrocarbons. view less
Dynasylan® VTEO Evonik Operations GmbH, BL Silanes Dynasylan® VTEO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick.
Dynasylan® VTMO Evonik Operations GmbH, BL Silanes Dynasylan® VTMO is comonly used as a monomer for solvent or water-borne acrylic polymers. It is usually used in small amounts to increase the crosslinking density and improve adhesion on substrates such as concrete and brick.
HMS-013 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-031 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-064 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-071 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-082 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-151 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-301 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-501 Gelest, Incorporated Trimethylsiloxy terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
HMS-H271 Gelest, Incorporated Hydride terminated methylhydrosiloxane-dimethylsiloxane copolymer. Request Sample
Lonzamon™ AATMP Lonza Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers ...view more Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. view less Request Sample
PAN-040 Gelest, Incorporated Catalyst for transesterification. Request Sample
Polydo DP-1000 Kukdo Chemical Co., Ltd. Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...view more Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less
Polydo DP-2000 Kukdo Chemical Co., Ltd. Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property.
Polydo DP-3000 Kukdo Chemical Co., Ltd. Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...view more Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. view less
Polydo DP-400 Kukdo Chemical Co., Ltd. Polydo DP-400 polyether polyol is 400 molecular weight polyether diol. It is applied to a variety of applications. DP-400 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water.
Polydo DP-4000 Kukdo Chemical Co., Ltd. Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...view more Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. view less
Polydo DP-4000E Kukdo Chemical Co., Ltd. Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast e...view more Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. view less
Polydo DP-750 Kukdo Chemical Co., Ltd. Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...view more Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less
Polydo ED-500 Kukdo Chemical Co., Ltd. Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage.
Polydo ED-750 Kukdo Chemical Co., Ltd. Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage.
Polydo GY-1000 Kukdo Chemical Co., Ltd. Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...view more Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less
Polydo GY-250 Kukdo Chemical Co., Ltd. Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...view more Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less
Polydo GY-3000 Kukdo Chemical Co., Ltd. Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...view more Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. view less
Polydo GY-3000E Kukdo Chemical Co., Ltd. Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers.
Polydo GY-3010E Kukdo Chemical Co., Ltd. Polydo GY-3010E polyether polyol is a glycerine initiated, nominal 3,000 molecular weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams.
Polydo GY-3300E Kukdo Chemical Co., Ltd. Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell...view more Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell-opener for high resilient flexible foam and cold molded flexible foam. view less
Polydo GY-3500 Kukdo Chemical Co., Ltd. Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams.
Polydo GY-4000 Kukdo Chemical Co., Ltd. Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...view more Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. view less
Polydo GY-420 Kukdo Chemical Co., Ltd. Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing ...view more Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing materials. Foam density can be varied with formulation. view less
Polydo GY-5000E Kukdo Chemical Co., Ltd. Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...view more Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less
Polydo GY-5100 Kukdo Chemical Co., Ltd. Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot...view more Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less
Polydo GY-6000E Kukdo Chemical Co., Ltd. Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...view more Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. view less
Polydo GY-600E Kukdo Chemical Co., Ltd. Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most p...view more Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most polyether polyols and can be blended with other diols or triols. view less
Polydo GY-700 Kukdo Chemical Co., Ltd. Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...view more Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less
Polydo GY-750P Kukdo Chemical Co., Ltd. Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with ot...view more Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less
Polydo PN-400 Kukdo Chemical Co., Ltd. Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...view more Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. view less
Polydo PN-560 Kukdo Chemical Co., Ltd. Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...view more Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. view less
Polydo SC-357 Kukdo Chemical Co., Ltd. Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...view more Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less
Polydo SC-381 Kukdo Chemical Co., Ltd. Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...view more Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less
Polydo SC-400 Kukdo Chemical Co., Ltd. Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the p...view more Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. view less
Polydo SC-450 Kukdo Chemical Co., Ltd. Polydo SC-450 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the pre-polymer process.
Polydo SC-4508 Kukdo Chemical Co., Ltd. Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or i...view more Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less
Polydo SC-455 Kukdo Chemical Co., Ltd. Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...view more Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. view less
Polydo SC-490 Kukdo Chemical Co., Ltd. Polydo SC-490 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the prepolymer process.
Polydo ST-480 Kukdo Chemical Co., Ltd. Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...view more Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation prepolymer process. view less
Polydo ST-481 Kukdo Chemical Co., Ltd. Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...view more Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. view less
Polydo TD-400 Kukdo Chemical Co., Ltd. Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...view more Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. view less
Polydo TD-405 Kukdo Chemical Co., Ltd. Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...view more Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. view less
Polydo TE-360 Kukdo Chemical Co., Ltd. Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration,...view more Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, transportation and construction applications. view less
PSI-021 Gelest, Incorporated Crosslinker for two-component condensation cure (silanol) RTV's. Request Sample
PSI-023 Gelest, Incorporated Base for zinc-rich paints. Request Sample
PSI-026 Gelest, Incorporated Highest silicon dioxide content precursor for sol-gel. Request Sample
PSIAL-007 Gelest, Incorporated Sol-gel intermediate for aluminum silicates. Request Sample
PSITI-019 Gelest, Incorporated Employed in formation of titania-silica aerogels. Request Sample
PTI-008 Gelest, Incorporated Polymeric metal alkoxide that contains roughly 5% free 2-ethyl-1,3-hexanediol. Request Sample
PTI-023 Gelest, Incorporated Polymeric metal alkoxide stabilized with roughly 5% ethylene glycol. Request Sample
Saret® SR515 Sartomer Americas Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber...view more Saret® SR515 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains nitroso inhibitor packages. This product improves mechanical and performance properties when incorporated into peroxide cure natural and synthetic rubber systems. Saret® SR500 offers good hardness and high modulus. It has a low mooney viscosity and a low compression set. Suggested applications of this product are for rubber and plastics, elastomers for rubber and plastics, and sealants. view less
Saret® SR516 Sartomer Americas Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performa...view more Saret® SR516 coagent is a difunctional, low color, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less
Saret® SR517 Sartomer Americas Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performanc...view more Saret® SR517 coagent is a trifunctional, low color, low staining, scorch retarding aid which contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less
Saret® SR517HP Sartomer Americas Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...view more Saret® SR517HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR517HP is also available as a solid dispersion. Suggested applications include: plastisols, rubber and plastics, building profile, elastomers, molded goods, radiator hose and rolls rubbers and plastics, and sealants. view less
Saret® SR519HP Sartomer Americas Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical...view more Saret® SR519HP coagent is a trifunctional, low color, low odor, low staining, scorch retarding coagent that contains non-nitroso inhibitor packages. When incorporated into peroxide cure natural and synthetic rubber systems, the product improves mechanical and performance properties. Saret® SR519HP is also available as a solid dispersion. Suggested applications include: elastomers, plastisols, rubber and plastics, building profile, injection molding and radiator hose rubbers and plastics, and sealants. view less
Saret® SR522D Sartomer Americas Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D co...view more Saret® SR522D is a dispersion of an acrylic coagent that can be used with peroxide to cure EPDM and other elastomers to give extremely low compression set, high tensile strength, and fast curing times while maintaining good scorch safety. Saret® SR522D contains a safe, non-nitroso scorch retarder and exhibits low color and low staining. Suggested applications for this product include belts, cables, and hoses; as well as, injection molding, radiator hose, rolls, and other rubber and plastics applications. view less
SIB1610.0 Gelest, Incorporated Bis(n-methylbenzamido)ethoxymethyl-silane. Request Sample
SIB1817.0 Gelest, Incorporated Additive to formulations that enhances adhesion. Request Sample
SID2790.0 Gelest, Incorporated Adhesion promoter for silicone RTV's. Request Sample
SIE4899.0 Gelest, Incorporated Liquid crosslinker for silicone RTV's. Request Sample
SIM6519.0 Gelest, Incorporated Most common crosslinker for condensation cure silicone RTV's. Request Sample
SIM6519.2 Gelest, Incorporated Liquid crosslinker blend for silicone RTV's. Request Sample
SIM6555.0 Gelest, Incorporated Methyltriethyoxysilane. Request Sample
SIM6560.0 Gelest, Incorporated Methyltrimethoxysilane. Request Sample
SIM6590.0 Gelest, Incorporated Methyltris(methylethylketoximino)-silane that is a neutral crosslinker for condensation cure silicones. Request Sample
SIP6826.0 Gelest, Incorporated Crosslinker for medium refractive index vinyl addition silicone elastomers. Request Sample
SIT7110.0 Gelest, Incorporated Tetraethoxysilane. Request Sample
SIT7278.0 Gelest, Incorporated Tetrakis(dimethylsiloxy)silane. Request Sample
SIT7777.0 Gelest, Incorporated Tetra-n-propoxysilane. Request Sample
SIT8372.4 Gelest, Incorporated Trifluoropropyltris(dimethylsiloxy)-silane. Request Sample
SIT8710.0 Gelest, Incorporated Tris(cyclohexylamino)methylsilane. Request Sample
SR507A Sartomer Americas SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesive...view more SR507A is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems, including polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: adhesives, coatings, electronics, encapsulants, inks, polyurethane foams, and rubber & plastics. view less
SR533 Sartomer Americas SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coat...view more SR533 is a trifunctional monomer that can be used to enhance hardness, heat and solvent resistance, and electrical properties in polymer systems including, polyolefins, epoxies, polyesters, and polyvinyl chloride. Suggested applications include: foam coatings, TPE, inks, rubber and plastics, and wire and cable insulation. view less