| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curta...view more Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI, supplied as solvent-free. It is combined with cycloaliphatic diamines to formulate highly flexible, one-component stoving coatings, including those for application by dipping and curtain coating and adhesive cements. view less | |
| Desmodur® E 14 | Covestro | Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant fin...view more Desmodur® E 14 is a solvent-free, linear aromatic prepolymer based on toluene diisocyanate (TDI). It is recommended for the formulation of both coatings and sealants. Combinations with Desmodur E 22 polyisocyanate yield highly flexible water-resistant finishes and sprayable coatings. Desmodur E 14 can be used with amine crosslinkers to provide tough flexible films. view less | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned w...view more Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). It is a solvent-free liquid of medium viscosity. It is suitable for use in the formulation of moisture-curing, one-component systems which, when thinned with a suitable solvent, can be used as primers and sealers for porous substrates to provide protection against moisture, oil, fuel and other chemicals. It can also be used as a binder in the formulation of synthetic resin mortars. view less | |
| Desmodur® IL 1451 | Covestro | Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is ...view more Desmodur® IL 1451 is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Two-pack polyurethane coatings based on Desmodur® IL 1451 are characterized by their rapid initial drying and early sandability. This is most important in industrial wood and furniture finishing. view less | |
| Desmodur® IL BA | Covestro | Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coati...view more Desmodur® IL BA is an aromatic polyisocyanate based on toluene diisocyanate (TDI) and dissolved in n-butyl acetate. Used in the formulation of fast drying two-component clear and pigmented polyurethane coatings for wood, metal, and paper substrates. Coatings based on Desmodur® IL BA lend themselves to applications requiring high production rates and fast dry-to-handle times. Wood coatings formulated with Desmodur® IL BA show quick sanding properties. The applied finishes show little tendency to run from sharp edges. view less | |
| Desmodur® IL EA | Covestro | Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used i...view more Desmodur® IL EA is an aromatic polyisocyanate resin based on toluene diisocyanate (TDI). Form supplied is approximately 51 % in ethyl acetate. Can be used as a hardener component for fast-drying, two-component polyurethane coatings. It can also be used in combination with various Baycoll® products or other hydroxyl-bearing substances to formulate adhesives. Because of its fast drying, Desmodur IL EA is mainly used in coatings for on-line applications, like the packaging industry or in industrial furniture finishing. view less | |
| Desmodur® L 67 BA | Covestro | Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-c...view more Desmodur® L 67 BA is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in butyl acetate. Can be used in combination with various Desmophen® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings. Systems crosslinked with Desmodur® L 67 BA can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
| Desmodur® L 67 MPA/X | Covestro | Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to ...view more Desmodur® L 67 MPA/X is an aromtic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 67% in 1-methoxypropylacetate-2/xylene (1:1). Can be used in combination with various Desmophen® grades or other hydroxylbearing substances to formulate air-drying twocomponent polyurethane coatings. Systems crosslinked with Desmodur® L 67 MPA/X can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. view less | |
| Desmodur® L 75 | Covestro | Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formul...view more Desmodur® L 75 is an aromatic polyisocyanate based on toluene diisocyanate. Form supplied is approximately 75% in ethyl acetate. Can be used in combination with various Desmophen®, Baycoll®, Desmocoll® grades or other hydroxyl-bearing substances to formulate air-drying two-component polyurethane coatings and adhesives. Systems crosslinked with Desmodur L 75 can be used as coatings for furniture, parquet flooring, metal, paper, plastics and mineral substrates. It is also suitable for room-temperature crosslinking of adhesives based on Desmocoll® or Baycoll®. These can be used to bond many materials,e.g. wood, metal and plastic. view less | |
| ISONATE 125M | Univar Solutions | ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional produ...view more ISONATE 125M is a crystalline, pure MDI mixture composed of approximately 98% 4,4’-diphenylmethane diisocyanate and 2 percent 2,4’-diphenylmethane diisocyanate. Characterized by high purity, low acidity and reproducible reactivity, this difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. view less | Request Sample |
| ISONATE 125MDR | Univar Solutions | ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key i...view more ISONATE 125MDR is a crystalline, pure MDI mixture of approximately 98% 4,4`-diphenylmethane diisocyanate and 2% 2,4`-diphenylmethane diisocyanateis characterized by high purity, low acidity and reproducible reactivity. This difunctional product is a key ingredient in preparing prepolymers for polyurethane processing. Judicious use of polyols, extenders and additives permits the manufacture of thermoplastic polymers suitable for extrusion, injection molding or solution applications. view less | Request Sample |
| ISONATE 128 | Univar Solutions | ISONATE 128 is a stable, liquid two-functional isocyanate that offers energy and cost savings, as well as easier handling for the elastomer and industrial polyurethane markets. This product offers superior handling, and with optimal storage conditions bet...view more ISONATE 128 is a stable, liquid two-functional isocyanate that offers energy and cost savings, as well as easier handling for the elastomer and industrial polyurethane markets. This product offers superior handling, and with optimal storage conditions between 80-95 °F (27-35 °C), it also provides stability in storage. . view less | Request Sample |
| ISONATE 143-L | Univar Solutions | ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation ...view more ISONATE 143-L is a polycarbodiimide-modified diphenylmethane diisocyanate. Liquid at room temperature, this product has a low viscosity and good storage stability down to 75°F. The polycarbodiimide adduct offers extra flexibility because adduct formation is reversible (dissociation generates an additional isocyanate function). The carbodiimide linkage aids the stabilization of the polymer against hydrolytic degradation. view less | Request Sample |
| ISONATE 181 | Univar Solutions | ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between iso...view more ISONATE 181 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with sufficient glycol to allow easy handling down to 80°F (27°C). This medium-viscosity, supercooled liquid provides more rapid compatibility between isocyanates and polyols, which increases the effectiveness of catalysts present and usually results in a more easily controlled polymer reaction. view less | Request Sample |
| ISONATE 240 | Univar Solutions | ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be form...view more ISONATE 240 is a modified MDI compound produced by reacting high-purity diphenylmethane diisocyanate with a high molecular weight polyester polyol, resulting in a material with good storage stability down to 72°F. This medium-viscosity product may be formulated with conventional polyether or polyester polyols and short chain diols or triols to yield high physical property elastomers or microcellular foams via the cast, low pressure or RIM-dispensing processes. view less | Request Sample |
| Millionate® MT | Tosoh Corporation | Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and art...view more Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Millionate® MT-F | Tosoh Corporation | Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and a...view more Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| PAPI 20 | Univar Solutions | PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurat...view more PAPI 20 is a polymethylene polyphenylisocyanate that contains MDI. This product`s functionality value of 3.2 and high viscosity result in highly rigid foams. This product is designed for uses where high viscosity is required for processing polyisocyanurate foams. view less | Request Sample |
| PAPI 23 | Univar Solutions | PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic...view more PAPI 23 is a light brown, low viscosity polymeric Methylene Diphenyl Diisocyanate (MDI) containing high quantities of Monomeric Methylene Diphenyl Diisocyanate (MMDI) isomers with an average functionality of 2.2-2.3. It may be used to produce viscoelastic (VE) and high resiliency (HR) foams. view less | Request Sample |
| PAPI 27 | Univar Solutions | PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, mak...view more PAPI 27 is a polymethylene polyphenylisocyanate that contains MDI. This product has a narrow molecular weight distribution and a high reactivity. Applicable to many foam processes, this product is compatible with rigid polyether and polyester polyols, making it suitable for a full range of low- to high-density semi-rigid foams, rigid foams and structural RIM processing. view less | Request Sample |
| PAPI 580N | Univar Solutions | PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excel...view more PAPI 580N is a polymethylene polyphenylisocyanate that contains MDI. This product has a high functionality and a relatively high viscosity. Recommended for use in polyisocyanurate rigid foams, this product imparts good resistance to heat distortion, excellent strength properties at low densities and improved humid age stability. view less | Request Sample |
| PAPI 94 | Univar Solutions | PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. ...view more PAPI 94 is A polymethylene polyphenylisocyanate that contains MDI. This product’s low viscosity, low functionality, increased diphenylmethane diisocyanate content and increased percentage of orthopara isomers make PAPI 94 polymeric MDI highly versatile. This product also offers delayed gel times, which results in better flow into molds for semiflexible and integral skin foams. view less | Request Sample |
| PAPI 95 | Univar Solutions | PAPI 95 is a polymethylene polyphenylisocyanate that contains MDI. This product’s viscosity and functionality have been optimized by maintaining a high diphenylmethane diisocyanate content and a high percentage of ortho-para isomers to provide excellent f...view more PAPI 95 is a polymethylene polyphenylisocyanate that contains MDI. This product’s viscosity and functionality have been optimized by maintaining a high diphenylmethane diisocyanate content and a high percentage of ortho-para isomers to provide excellent flowability and fast curing in a variety of polyurethane applications. This unique combination makes this product suitable for a full range of low and high density semi-flexible and semi-rigid foam applications that demand fast demold times for intricate parts. view less | Request Sample |
| Polurene OK.D AE | S.A.P.I.C.I. SpA | Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other...view more Polurene OK.D AE is an aliphatic-aromatic isocyanurate. This product is compatible with nitrocellulose. It can be used in polishable varnishes and enamels for wood. It can also be used in enamels with good colour retention for metal, plastics and other substrates. Finally, it can be used in polyurethane adhesives and inks. This product contains less than .5% TDI or HDI isocyanates. view less | |
| VORANATE T-80 TYPE I | Univar Solutions | VORANATE T-80 TYPE I is Pure Toluene diisocyanate with 80% 2,4-TDI with 20% 2,6-TDI with low acidity. Used in elastomers, flexible foams and carpet underlayment. | Request Sample |
| VORANATE T-80 TYPE II | Univar Solutions | VORANATE T-80 TYPE II is Pure Toluene diisocyanate with 80% 2,4-TDI with 20% 2,6-TDI with high acidity. Used in elastomers, flexible foams and carpet underlayment. | Request Sample |
