UL Prospector

Success!

Successfully saved your search
79 Results
AC-703 Anionic Fluorocarbon Surfactant Ark (Fogang) Chemicals Industry Co., Ltd. AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in s...view more AC-703 Anionic Fluorocarbon Surfactant is an anionic surfactant that is primarily used as a wetting, dispersing and leveling agent in paints, inks, dyes and leather production. This product has a high temperature and alkali resistance and can be used in strong base or strong oxidant media. It is a brownish, clear liquid in appearance. view less
BYK®-3400 BYK BYK®-3400 is a silicone surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-3410 BYK BYK®-3410 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the surface tension and thus improves subtrate wetting.
BYK®-345 BYK BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilizatio...view more BYK®-345 is a polyether modified siloxane. It is the solvent-free version of BYK-346. These additives improve substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization and they do not impair recoatability. view less
BYK®-346 BYK BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the p...view more BYK®-346 is a solution of a polyether modified siloxane. This product is the standard additive to improve substrate wetting in aqueous systems. It should normally be added to the finished paint. If necessary, however, it can be added at any stage of the production process. view less
BYK®-347 BYK BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-...view more BYK®-347 is a polyether modified siloxane. This product exhibits only minor activity at the interface paint/air due to its chemical structure. The advantage is a further improvement of recoatability. For better overspray acceptance a combination with BYK-345 is recommended. view less
BYK®-348 BYK BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...view more BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. view less
BYK®-349 BYK BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable...view more BYK®-349 is a silicone surfactant used to improve substrate wetting in aqueous systems. It is composed of polyether modified siloxane. This product provides various water-borne coatings with highly effective spreading, wetting and leveling. It is suitable for water-borne systems based on: styrene acrylic, pure acrylic and acrylic/PU combinations, crosslinkable polyurethanes and baking systems. view less
BYK®-DYNWET 800 BYK BYK®-DYNWET 800 is a silicone-free surface additive for aqueous adhesives and sealants. It reduces the dynamic surface tension during fast application processes and thus improves subtrate wetting.
CV1-1142 NuSil Silicone Technology 1 CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with co...view more CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with controlled flow for consistent bond lines in applications that require a high extrusion rate and one-part material. view less
CV1-1142-4 NuSil Silicone Technology 1 CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...view more CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. view less
DAPRO® W-95HS Elementis DAPRO® W-95HS is a surface tension modifier for waterborne systems. This product improves flow and leveling properties of coatings and inks.
Dow Corning® 26 Additive Univar Solutions Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. Request Sample
DOWSIL™ 11 Additive Univar Solutions DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, ...view more DOWSIL™ 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. view less Request Sample
DOWSIL™ 29 Additive Univar Solutions DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin ...view more DOWSIL™ 29 Additive is a carbinol functional silicone glycol surfactant used to provide leveling and wetting, and improve gloss. It is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids. view less Request Sample
DOWSIL™ 3 Additive Univar Solutions DOWSIL™ 3 Additive is a silanol functional silicone resin for dispersion of inorganic pigments to prevent flooding and floating. It has been tested successfully in solvent-based wood coatings and solvent-based industrial coatings. Request Sample
DOWSIL™ 401LS Additive Univar Solutions DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formul...view more DOWSIL™ 401LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in solventborne and waterborne formulations at low addition levels. This product is suitable for pigmented and clear coat formulations, wood coatings, plastic coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less Request Sample
DOWSIL™ 402LS Additive Univar Solutions DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coa...view more DOWSIL™ 402LS Additive is an easy-to-use, high performance silicone polyether additive that gives good flow, leveling and slip in waterborne and radiation curable formulations at low addition levels. This product is recommended for pigmented and clear coat formulations, wood coatings, industrial metal coatings, inks and overprint varnishes, and is compliant with legislation for food packaging inks. view less Request Sample
DOWSIL™ 56 Additive Univar Solutions DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood ...view more DOWSIL™ 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. view less Request Sample
DOWSIL™ 57 Additive Univar Solutions DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic...view more DOWSIL™ 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. view less Request Sample
DOWSIL™ 7 Additive Univar Solutions DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solid...view more DOWSIL™ 7 Additive is a foam control and leveling/wetting aid in solvent-based ink and coating systems. It is effective at low concentrations. The amount required depends on type of formulation, the solvent it contains, resin system and total system solids. view less Request Sample
Gelycel® Amtex Gelycel® is a carboxymethylcellulose product which is available in different grades based on viscosity, degree of substitution, and purity. Carboxymethylcellulose are the most commonly used and versatile hydrocolloids since they supply properties such as ...view more Gelycel® is a carboxymethylcellulose product which is available in different grades based on viscosity, degree of substitution, and purity. Carboxymethylcellulose are the most commonly used and versatile hydrocolloids since they supply properties such as thickening, emulsifying, suspension, water retention, and film formation. It also functions as a crystallization retardant, binding agent, and colloid protector. view less
HB-132 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...view more HB-132 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. view less
HB-135 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, de...view more HB-135 is a structure-modified hydrophobic fumed silica. Featuring low thickening, excellent processability, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in adhesives & sealants, defoamers, and printing toners. view less
HB-139 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, an...view more HB-139 is a structure-modified hydrophobic fumed silica. Featuring good thickening effects, high water resistance, and good free-flow characteristics, it is well-suited for transparent powder systems. This product is designed for use in coatings, inks, and adhesives & sealants. view less
HB-612 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use i...view more HB-612 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features good rheological control, anti-sagging, free-flow, and anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less
HB-615 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-615 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in coatings, inks, negative toners, and adhesives & sealants. view less
HB-620 Guangzhou GBS High-Tech & Industry Co., Ltd. HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use i...view more HB-620 is a hydrophobic fumed silica, in the form of a high purity white colloidal powder, which has been treated with HMDS. It features high hydrophobicity, thixotropic stability, and free-flow & anti-caking properties. This product is designed for use in paints & coatings, inks, and adhesives & sealants. view less
HL-150 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants...view more HL-150 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control and improved free-flow & anti-caking characteristics. This product is designed for use in adhesives & sealants and paints & coatings. view less
HL-200 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in ...view more HL-200 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides high transparency, good rheological & thixotropic control, and improved free-flow & anti-caking characteristics. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less
HL-300 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-300 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less
HL-380 Guangzhou GBS High-Tech & Industry Co., Ltd. HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for us...view more HL-380 is a hydrophilic fumed silica, in the form of a high purity white colloidal powder, which provides good rheological & thixotropic control, improved free-flow & anti-caking characteristics, and excellent transparency. This product is designed for use in paints & coatings, adhesives & sealants, and printing inks. view less
METOLAT® 288 Munzing Chemie METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling,...view more METOLAT® 288 is a colourless liquid wetting and leveling agent for aqueous systems. It provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT® 288 provides good wetting and increases leveling, especially in low viscosity systems. Main applications include overprint varnishes, container coatings (ext.), printing inks, wood coatings, and adhesives. view less
PAT-ADD FL 7 Patcham USA PAT-ADD FL 7 is a liquid flow agent solvent-borne systems, notably industrial coatings; this product is silicone and fluoro-free. The use of PAT-ADD FL 7 contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel or...view more PAT-ADD FL 7 is a liquid flow agent solvent-borne systems, notably industrial coatings; this product is silicone and fluoro-free. The use of PAT-ADD FL 7 contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel or craters. Main benefits are: highly effective flow and leveling agent, reduced risk of orange peel, craters, pin-holes and film waviness, enables the formation of smooth film surface with high distinctness of image (DOI), and high transparency in lacquers and clears. view less
PAT-ADD FL 9 Patcham USA PAT-ADD FL 9 is a liquid flow and anti-cratering additive for industrial solvent-borne coatings and inks; the product is free of silicone and fluorine. It contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel o...view more PAT-ADD FL 9 is a liquid flow and anti-cratering additive for industrial solvent-borne coatings and inks; the product is free of silicone and fluorine. It contributes to smooth films, improved appearance; free of imperfections like pinholes, orange peel or craters. Main benefits are: highly effective flow and leveling agent, reduced risk of orange peel, craters, pin-holes and film waviness, enables the formation of smooth film surface with high distinctness of image (DOI), high transparency in lacquers and clears, active solids are thermally stable, and effective in a wide diversity of paint systems. view less
PAT-ADD LE 1010 Patcham USA PAT-ADD LE 1010 is a leveling agent and slip agent for use in solvent-borne coatings. PAT-ADD LE 1010 is versatile in application and effective in various solvent-borne systems for optimizing flow, leveling slip, and mar resistance. Main benefits are: hig...view more PAT-ADD LE 1010 is a leveling agent and slip agent for use in solvent-borne coatings. PAT-ADD LE 1010 is versatile in application and effective in various solvent-borne systems for optimizing flow, leveling slip, and mar resistance. Main benefits are: highly effective leveling agent, increases slip and mar resistance, wide compatibility, limited foam stabilization, excellent compatibility, high transparency lacquers, and reduces coefficient of friction (COF). view less
PAT-ADD LE 1019 Patcham USA PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solven...view more PAT-ADD LE 1019 is a highly concentrated, solvent-free surface modifier, showing a very wide compatibility range. The additive provides excellent slip and mar resistance properties and contributes to improved flow and levelling in solvent-based and solvent-free systems. Main benefits are: broad range compatibility, highly effective slip, leveling, and mar resistance additive, provides optimal flow and leveling, and soluble in water, methanol, iso-propanol, and xylene. Limited solubility in mineral spirits. view less
PAT-ADD LE 1020 Patcham USA PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly...view more PAT-ADD LE 1020 is a levelling and substrate wetting agent for use in solvent-borne coatings PAT-ADD LE 1020 is very suitable for use in clear coatings. PAT-ADD LE 1020 enhances flow and levelling and provides gloss optimisation. Main benefits are: highly effective leveling and substrate wetting additive, wide range compatibility, reduce coefficent of friction (COF), reduce risk of pigment float, and effective in epoxies, PUR, acrylics, polyester industrial paints and inks. view less
PAT-ADD LE 1030 Patcham USA PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first cho...view more PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first choice for PUR systems, excellent substrate wetting and air release, effective leveling agent for water borne and polar solvent systems, wide range of compatibilty, strong surface tension reduction, reduces risk of pigment float, and effective in PUR, acrylic and polyester melamine industrial paints. view less
PAT-ADD LE 1040 Patcham USA PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefit...view more PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefits are: first choice for stoving systems, highly effective leveling additive, wide compatibility, reduces coefficient of friction (COF), reduces risk of pigment float, and effective in epoxies, acrylic and polester melamine resin based industrial paints. view less
PAT-ADD LE 1066 Patcham USA PAT-ADD LE 1066 is a leveling agent with a slight defoaming effect in solvent-free floor coatings, based on epoxy-, polyurethane or similar resin systems. It can be used in industrial and protective coatings. Main benefits are: specifically designed for f...view more PAT-ADD LE 1066 is a leveling agent with a slight defoaming effect in solvent-free floor coatings, based on epoxy-, polyurethane or similar resin systems. It can be used in industrial and protective coatings. Main benefits are: specifically designed for floor coatings, highly effective leveling additive, and excellent compatibility, high transparency. view less
PAT-ADD LE 1075 Patcham USA PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrat...view more PAT-ADD LE 1075 is leveling additive and multipurpose interfacial tension modifier for printing inks and paint formulations. It is silicone and fluorine free and highly suitable for eliminating coating surface defects. Main benefits are: improved substrate wetting, optimized wetting and adhesion, easy incorporation, add and mix, low surface tension in water (0,5%): approximately 33mNm, free of silicones: no adverse effect on intercoat adhesion. view less
PAT-ADD LE 1433 Patcham USA PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetti...view more PAT-ADD LE 1433 is a flow and leveling additive for waterborne and polar solvent clears as well as pigmented formulations. It contributes to appealing film performances, even in coatings applied to low surface energy substrates; optimizing substrate wetting, dearation, and crater resistance. Main benefits are: contributes to optimal film appearance and DOI, highly effective surface tension control, reduces risk for cratering, pin-holing, orange peel, provides optimal flow and leveling on low surface energy substrates, and promotes air release while retaining recoat properties. view less
PAT-ADD LE 1477 Patcham USA PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: o...view more PAT-ADD LE 1477 is flow and leveling additive for solvent-borne clear and pigmented coating formulations. It benefits coatings applied to low surface energy substrates, optimizing substrate wetting, deaeration, and preventing craters. Main benefits are: optimal film appearance, highly effective surface tension reducer, prevents cratering, pin-holing, orange peel; optimal flow and leveling on low surface energy substrates, air release without impact on recoat. view less
PAT-ADD SL 1120 Patcham USA PAT-ADD SL 1120 is a slip and leveling agent for use in solvent-borne coatings. PAT-ADD SL 1120 is mainly used in industrial coatings. PAT-ADD SL 1120 is extremely versatile in application, so efficient in various solventborne systems for optimizing slip,...view more PAT-ADD SL 1120 is a slip and leveling agent for use in solvent-borne coatings. PAT-ADD SL 1120 is mainly used in industrial coatings. PAT-ADD SL 1120 is extremely versatile in application, so efficient in various solventborne systems for optimizing slip, mar resistance and contributing to improved flow and leveling. Main benefits are: highly effective slip agent, defoaming, anti-blocking, mar resistance, excellent film transparency, and reduces coefficient of friction (COF). view less
PChem® BM708 Pioneer Chemicals Co., Ltd. PChem® BM708, in the form of syrup, is an acrylate copolymer that is soluble in chlorinated hydrocarbons, esters, aromatic, and ketones. It is a resin for manufacturers’ pressure sensitive pressure adhesives, a binder for hot melt adhesives, and is compat...view more PChem® BM708, in the form of syrup, is an acrylate copolymer that is soluble in chlorinated hydrocarbons, esters, aromatic, and ketones. It is a resin for manufacturers’ pressure sensitive pressure adhesives, a binder for hot melt adhesives, and is compatible with extensive variety of other resins including nitrocellulose resins, acrylics, and vinyl. PChem® BM708 has a molecular weight of 390,000 g/mol, moisture content of equal to or less than 1.0%, acid value of 27 mgKOH/g, and an inherent viscosity of 0.55. view less
PEL-SIL CL290 Ele Corporation PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with ma...view more PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. view less
PEL-SIL CL310 Ele Corporation PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative ...view more PEL-SIL CL310 is a hydrophobic organo-modified silicone-based additive consisting of a siloxane backbone and polypropylene oxide (PO) side chains. PEL-SIL CL310 minimizes foam stability and is an excellent defoamer for waterborne industrial or decorative coatings. PEL-SIL CL310 is compatible with solvent-borne coatings and inks. It provides good low and leveling performance, mar resistance, antiblocking and releasing properties. view less
PEL-SIL CL320 Ele Corporation PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl funct...view more PEL-SIL CL320 is a low HLB silicone surfactant and a leveling & gloss agent. It is used as an additive for polyurethane coating resin systems. PEL-SIL CL320 will react into PU coatings to give silicone properties to the surface because it is hydrxyl functional. It is useful for imparting silicone characteristics itno synthetic leather top coat formulations. view less
PEL-SIL CL330 Ele Corporation PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-...view more PEL-SIL CL330 is a silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) side chains. It is stable in neutral or mildly acid or alkaline aqueous solutions. It is recommended for use as a leveling and wetting agent in water-borne paints and coatings in automotive, transportation, construction and aerospace industries. It can also be used in solvent-based and high solid/UV curable coatings as leveling agent. For polyurethane foam coatings, PEL-SIL CL330 acts a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. It exhibits excellent compatibility with most polyol premixes. view less
PEL-SIL CL340 Ele Corporation PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it prov...view more PEL-SIL CL340 is a nonreactive, acetate capped, silicone glycol copolymer surfactant supplied at 100 percent active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. Additionally, it provides mar resistance for coatings applications such as glossy printed materials. view less
PEL-SIL CL350 Ele Corporation PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a r...view more PEL-SIL CL350 is a polysiloxane with EO/PO polyether side chains. It can be used as a low foaming flow and leveling agent and wetting agent in waterborne and solventborne coatings and inks. PEL-SIL CL350 is also reactive in 2K polyurethane systems as a resin and surface modifier. Other uses for PEL-SIL CL350 include surface tension reduction in silicone emulsions and improvement of drainage in pulp brownstock washing. view less
PEL-SIL CL360 Ele Corporation PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent f...view more PEL-SIL CL360 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. It has pendant molecular structure. PEL-SIL CL360 is an excellent flow and leveling agent for solvent-based coatings and inks. It can also be used as a defoamer or anti-foaming agent for waterborne coatings systems. In polyurethane foam coatings, PEL-SIL CL360 acts as a surfactant and foam cell stabilizer. It is not compatible on the isocyanate side and must be added with the polyol. view less
PEL-SIL CL400 Ele Corporation PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems throug...view more PEL-SIL CL400 is a linear, 100% active, PEG-10 siloxane polyether. It is a slip control agent for both waterborne, solventborne UV/EB coatings and inks. It is also a flow and leveling agent and defoamer that can be incorporated into polymer systems through its two primary hydroxyls in polyurethane systems. view less
Polyether Modified Siloxane FD-408 Zhejiang Feidian Chemical Co., Ltd. FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...view more FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. view less
Polyethylene Wax BassTech International Polyethylene Wax is a thermoplastic polymer which has a white appearance. This product is product has a variety of applications including paint, coatings, and inks, and is available in HDPE and LDPE forms.
R-2188 NuSil Silicone Technology 1 R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...view more R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. view less
R4-1140 NuSil Silicone Technology 1 R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...view more R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. view less
SpectrAl® 100 Cabot Corporation - Additives SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products.
SpectrAl® 51 Cabot Corporation - Additives SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products.
SpectrAl® 81 Cabot Corporation - Additives SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products.
Valida L,3% Sappi Biotech Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less
Valida S191C Sappi Biotech Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less
Valida S231C Sappi Biotech Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, e...view more Valida is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre-hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. In adhesive application, Valida improves dry-out time, enables recovery of viscosity, improves anti-settling of particles and in-can stability, as well as sagging & leveling balance. The highly shear thinning profile makes Valida easy to be processed and provide enhanced spray-ability. view less
Venadol™ 104 Harcros Chemicals, Inc. Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol...view more Venadol™ 104 is a 100% active surface-active agent with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104 PG50 Harcros Chemicals, Inc. Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various...view more Venadol™ 104 PG50 is a 50% active surface-active agent in propylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104 PG50 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104BC Harcros Chemicals, Inc. Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...view more Venadol™ 104BC is a 50% active surface-active agent in 2-Butoxyethanol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104BC to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104DPM Harcros Chemicals, Inc. Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilizati...view more Venadol™ 104DPM is a 50% active surface-active agent in Dipropylene glycol monomethyl ether with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104DPM to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104E Harcros Chemicals, Inc. Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...view more Venadol™ 104E is a 50% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104E to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104H Harcros Chemicals, Inc. Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various prop...view more Venadol™ 104H is a 75% active surface-active agent in ethylene glycol with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104H to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 104PA Harcros Chemicals, Inc. Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various pro...view more Venadol™ 104PA is a 50% active surface-active agent in 2-propanol(IPA) with a unique structure that allows multi-functional properties which include the following: foam control, reduction in surface tension, and viscosity stabilization. These various properties allow Venadol™ 104PA to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, This product is APE Free. view less
Venadol™ 20 Harcros Chemicals, Inc. Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubri...view more Venadol™ 20 is an effective wetting agent and molecular deofamer that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less
Venadol™ 40 Harcros Chemicals, Inc. Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be util...view more Venadol™ 40 is a non-foaming wetting agent with a unique structure that allows multi-functional properties which include the following: foam control, increased wetting and reduction in surface tension. These various properties allow Venadol™ 40 to be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less
Venadol™ 65 Harcros Chemicals, Inc. Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is...view more Venadol™ 65 is a low foaming wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less
Venadol™ 85 Harcros Chemicals, Inc. Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is ...view more Venadol™ 85 is an effective wetting agent that can be utilized in various application such as, inks, paint, coatings, adhesives, pigment manufacturing, pigment dispersion, dye processing, agricultural, cement, and metalworking lubricants. This product is APE Free. view less
VINNAPAS® 5025 L Wacker Chemical Corporation VINNAPAS® 5025 L is a leveling dispersible powder based on vinyl acetate and ethylene with good defoaming properties for smooth surfaces and very good tolerance against water over-dosage. Request Sample
VINNAPAS® 5111 L Wacker Chemical Corporation VINNAPAS® 5111 L is a leveling dispersible polymer powder based on vinyl acetate and ethylene with very good defoaming properties at low viscosity for very smooth, flat surfaces. Request Sample
VINNAPAS® 5222 L Wacker Chemical Corporation VINNAPAS® 5222 L is a dispersible polymer powder with very good defoaming properties that supports leveling for very smooth, flat surfaces of self-levelling compounds. Request Sample
VINNAPAS® 7031 H Wacker Chemical Corporation VINNAPAS® 7031 H is a flexible dispersible polymer powder based on vinyl acetate, ethylene and vinyl ester with hydrophobic effect and very good workability. Request Sample