| FS3-3730 | NuSil Silicone Technology 1 | FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistan...view more FS3-3730 is a translucent, one-part, adhesive/sealant that has 100 mole % flouorosilicone. It is strong and will bond aggressively to most surfaces. This product can be utilized for bonding and sealing applications that require solven and/or fuel resistance. It can also be used for protecting or bonding hardware components that have been exposed to gasoline or aviation fuels. view less | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...view more GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. view less | |
| GEL-8170 | NuSil Silicone Technology 1 | GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics ...view more GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics applications including HBLED's, photo detectors, flat panel displays and tacking/staking sensitive joints. This gel is ideal for applications that require an operating temperature range of -65°C to 200°C (-85°F to 392°F). view less | |
| GEL-8250 | NuSil Silicone Technology 1 | GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in appl...view more GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in applications that involve extreme temperatures with an operating temperature range of -115°C to 265°C (-178°F to 500°F). view less | |
| GEL1-8155 | NuSil Silicone Technology 1 | GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be use...view more GEL1-8155 is a dielectric firm silicone gel that has a high purity, and consist of two medium viscosity components that blend easily in a 1:1 ratio by weight or volume. It is recommended that this gel be used with automatic dispense systems. It can be used for backfilling, potting, dampening, and encapsulating applications that require a firm gel with optical clarity. view less | |
| LS-6140 | NuSil Silicone Technology 1 | LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics ...view more LS-6140 is a two-part, optically clear silicone system that is based on a methyl silicone polymer, and has a low viscosity. It can be used for casting, injecting or bonding molidng of high performance optical components. It can also be used for photonics applications that require a low outgassing and minimal volatile condensables to protect sensitive devices from condensation. view less | |
| LS-6143 | NuSil Silicone Technology 1 | LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It...view more LS-6143 is an optical thermoset that is based on a dimethyl-diphenyl copolymer with a broad operating temperature range. It can be used in photonics applications that require low outgassing to avoid condensation from forming on or in sensitive devices. It can also be used for bonding, casting or injection molding of permormance optical components. It is best for applications requiring an operating temperature range of -115°C to 260°C (-178°F to 500°F). view less | |
| LS-6941 | NuSil Silicone Technology 1 | LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This s...view more LS-6941 is an optical thermoset that is solvent free, and has a low viscosity. It will cure at room temperature or more rapidly when heat is added. It can be used for the bonding, casting or injecting molding of high performance optical components. This silicone is also ideal for applications that require index matching at 1.41. It is suitable for applications that require an operating temperature range of -65 to 240°C (–85 to 465°F). view less | |
| LS-6943 | NuSil Silicone Technology 1 | LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for ...view more LS-6943 is a two-part, clear silicone elastomer that is solvent free and has a low viscosity. The cure rate of this elastomer increases rapidly with the addition of heat. It is based on a dimethyl diphenyl silicone copolymer. This product can be used for the casting, injecting or bonding molding of high performance optical components. It is ideal to be used applications with an opertaing temperature range of -115 to 260°C (–175 to 500°F). view less | |
| LS-6946 | NuSil Silicone Technology 1 | LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product ...view more LS-6946 is a clear, pourable silicone system that cures at room temperature or rapidly with heat. It will cure in contact with most properly cleaned substrate materials uncluding optical plastics, optical glasses and photonic semiconductors. This product is physically strong and operates on a wide temperature range. It is ideal for the bonding, casting or injecting molding of high performance optical components. view less | |
| LS-8941 | NuSil Silicone Technology 1 | LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid ...view more LS-8941 is a two-part, optically clear, non-phenyl containing addition cure silicone. It is designed to stay thermo-optically stable with the exposure of heat and UV light. This product has a viscosity that is designed to be used with conventional Liquid Injection Molding equipment, and the material is self-leveling for casting application techniques. It is also ideal for molding or casting hard, non-yellowing lenses for LED, solar or other applications where a hard, optically-stable silicone is needed. view less | |
| LS1-6140 | NuSil Silicone Technology 1 | LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...view more LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. view less | |
| LS1-6941 | NuSil Silicone Technology 1 | LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components....view more LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components. It will cure in contact with most materials common to biomedical assemblies. view less | |
| LS2-6140 | NuSil Silicone Technology 1 | LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazar...view more LS2-6140 is an optically clear, primerless silicone encapsulant that has a low volatility and a high purity. This product can help protect electrical components and assemblies from moisture, chemicals, dust, shock, vibration, and other environmental hazards. It has exceptional thermal stability and is designed to work in optically harsh environments where high power led and uv led packages are a factor. view less | |
| LS2-6941 | NuSil Silicone Technology 1 | LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detec...view more LS2-6941 is an optically clear silicone elastomer that has a low viscosity and is solvent free. This product offers excellent physical and electrical stability across a broad temperature range. It can be used for photonics applications such as photo detectors, lasers, HBLEDs, discrete optics and flat panel displays that require a 1.41 refractive index. It can also provide protection for electronic components from vibration, shock, dust, moisture and other environmental hazards by potting or encapsulating. view less | |
| PSA-1170 | NuSil Silicone Technology 1 | PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is...view more PSA-1170 is a one-part, non-curing, pressure sensitive silicone adhesive that has a translucent appearance and a low viscosity. It can be used for temporarily adhering to various substrates such as silicone, glass, metals, and organic rubbers. PSA-1170 is supplied in flammable solvents so it needs to be handled cautiously. Allow solvent to evaporate before adhering or attaching adhesive-coated objects together. view less | |
| R-1130 | NuSil Silicone Technology 1 | R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and ...view more R-1130 is a non-corrosive, rapid curing, nun-slumping RTV silicone adhesive that can be used as a coating for semi-conductors and integrated circuits. It can also be utilized as an adhesive/sealant for electrical wires, terminals, mounting resistors and connectors. It is ideal for overhead or side wall applications due to its non-slumping characteristics. view less | |
| R-1140 | NuSil Silicone Technology 1 | R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces ...view more R-1140 is a one part, translucent, non-slumping silicone adhesive that is supplied in ready to use Semco® cartridges. This product bonds aggressively to most surfaces including glass, ceramics, metals, natural and synthetic fibers, wood, painted surfaces and other silicone rubbers. It is best used for applications that require an operating temperature rang of 65 to 240°C (-85 to 465°F). view less | |
| R-1505 | NuSil Silicone Technology 1 | R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protect...view more R-1505 is a non-corrosive, static dissipative RTV silicone that cures at room temperature to form a flexible, resilient, conductive bond or seal. It is best used for applications that require a non-corrosive adhesive/sealant. This product provides protection from extremes in humidity, temperature, radiation, thermal stress and mechanical stress. It can also be utilized as a shielding for RFI and EMI in electronic applications. view less | |
| R-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by appl...view more R1-2145 is an extremely tough gray silicone adhesive that does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing. It rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. view less | |
| R-2160 | NuSil Silicone Technology 1 | R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high vo...view more R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals. seals and gaskets due to its high physical strength. It is best used for applications that require an operating temperature range of -65°C to 315°C (-85°F to 600°F). view less | |
| R-2165 | NuSil Silicone Technology 1 | R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applicati...view more R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applications such as potting for sensors, relays, and other electronic components that require protection from vibration and other harsh environmental conditions. view less | |
| R-2175 | NuSil Silicone Technology 1 | R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and ha...view more R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and has several applications which include potting for connectors, sensors, relays, power devices and other electronic components that require protection from shock, vibration and other environmental hazards. view less | |
| R-2182 | NuSil Silicone Technology 1 | R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone sub...view more R-2182 is a low coefficient of friction silicone coating that cures to a smooth film that decreases the friction and increases abrasion resistance for moving, sliding, and rubbing parts. It provides a heat-cured, low friction coating on cured silicone substrates and results in a reduction of surface tack. It is best to apply by spraying or dipping. view less | |
| R-2188 | NuSil Silicone Technology 1 | R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high ...view more R-2188 is a silicone potting and encapsulating elastomer that is pourable, self-leveling, and cures at room temperature. This product is ideal for the encapsulating, potting and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages. It can help protect against shock, vibration, moisture, contaminants and dust. The low viscosity of this elastomer will allow the potting of complex geometries, and it will not trap air. view less | |
| R-2370 | NuSil Silicone Technology 1 | R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...view more R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. view less | |
| R-2380 | NuSil Silicone Technology 1 | R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam...view more R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam that also has exceptional thermal and electrical properties. view less | |
| R-2550 | NuSil Silicone Technology 1 | R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coa...view more R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coatings that require a material that pours. It can withstand extreme temperatures, operating in a range of -115 to 260°C (-178 to 500°F). view less | |
| R-2560 | NuSil Silicone Technology 1 | R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°...view more R-2560 is a two part, pourable, red RTV silicone elastomer that has a base of dimethyl diphenyl silicone copolymer. It can withstand extreme temperatures and can be used for applications that require an operating temperature range of 115°C to 260°C (-175°F to 500°F). This product can be used for thermal insulating as a firewall sealant, or as an ablative coating in missiles, rockets, aircraft and launch equipment. view less | |
| R-2630 | NuSil Silicone Technology 1 | R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations r...view more R-2630 is a black, electrically conductive RTV silicone that has a high durometer. It is based on a methyl silicone polymer and has a broad temperature range. This product can be used to adhere covers on housings or where grooves or other configurations require a flowable to limited flow material with a low viscosity. It can also be used for RFI and EMI shielding for space and electrical applications. It is well suited for formed in place conductive gaskets and has an operating temperature range of 65°C to 200°C (-85°F to 392°F). view less | |
| R-2631 | NuSil Silicone Technology 1 | R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings...view more R-2631 is a two-part, black, static dissipative RTV silicone that has a base of methyl silicone polymer. It can provide protection from humidity, radiation, mechanical and thermal stress. This product can also act as an adhesive to bond covers on housings or where grooves or other configurations require a flowable to limited flow material with a moderate extrusion rate. It is excellent for formed-in-place conductive gaskets and can provide shielding for RFI and EMI in industrial applications. view less | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...view more R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. view less | |
| R-2637 | NuSil Silicone Technology 1 | R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-plac...view more R-2637 is a tan, electrically conductive RTV silicone that is designed to cure at room temperature and more rapidly at elevated temperatures. It can be used for RFI and EMI shielding for aerospace applications. This product is excellent for formed-in-place conductive grounding connections and gaskets. It can also be used to adhere covers on housings that require a non-flowable to limited flow material. view less | |
| R-2655 | NuSil Silicone Technology 1 | R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where r...view more R-2655 is a high strength, transparent RTV silicone elastomer that has a low viscosity and an accelerated cure rate when heat is added. This product can be used to provide environmental protection in potting, encapsulating and coating applications where radiation resistance, low temperature flexibility, oxidation and thermal stability are needed. The low viscosity of this elastomer allows for easy flow around complex parts and it provides exceptional shock and electrical insulation resistance. view less | |
| R-2682-12 | NuSil Silicone Technology 1 | R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for ...view more R-2682-12 is a RTV silicone film adhesive that cures at room temperature, or rapidly with heat from in an oven or with a heating lamp. It can be used for bonding or sealing silicone elastomers and some metals or plastic. This product can also be used for applications that would require shorter processing times, easy clean-up, and consistent bond thickness. view less | |
| R-2930 | NuSil Silicone Technology 1 | R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a ...view more R-2930 is a two-part, white, thermally conductive silicone that cures rapidly with the addition of heat. This product can be used as an adhesive for integrated circuit substrates, heat sinks, base plates or where grooves or other configurations require a non-flowable to limited flow material. It can also provide the transfer of heat between electrical/electronic components and their heat sinks. view less | |
| R-2939 | NuSil Silicone Technology 1 | R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is i...view more R-2939 is a two-part, white, pourable, thermally conductive silicone that has a low viscosity and cures rapidly with the addition of heat. It can provide the transfer of heat between electrical/electronic components and their heat sinks. This product is ideally used as an adhesive for openings in modules and housings where grooves or other configurations require a non-flowable to limited flow material. view less | |
| R-2940 | NuSil Silicone Technology 1 | R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that ...view more R-2940 is a thermally conductive silicone that has a high strength that can be cured rapidly with the addition of heat. It can be used to adhere base plates, integrated circuit substrates, heat sinks, and other configurations that require a material that is non-flowable to a limited flow. It can also be used to provide heat transfer between electrical/electronic components and their heat sinks. view less | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...view more R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. view less | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...view more R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. view less | |
| R1-2145 | NuSil Silicone Technology 1 | R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by si...view more R1-2145 is an extremely tough gray silicone adhesive that rapidly cures at room temperature by applying heat in an oven or a heat gun or lamp. It does not require atmospheric moisture to cure and the product is available in easy to use, airless side by side kits that eliminate mixing and deairing, This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. It is ready for rapid production or prototyping due to the a rapid cure. view less | |
| R1-3930-11 | NuSil Silicone Technology 1 | R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for ...view more R1-3930-11 is a gray fluorosilicone, adhesive, sealant, and coating that bonds aggressively to most surfaces. This product can be utilized for sealing, coating, and bonding applications that require solvent and/or fuel resistance. It can also be used for bonding or protecting hardware components exposed to gasoline or aviation fuels. It can be further dispersed for spraying applications. view less | |
| R2-3930-11 | NuSil Silicone Technology 1 | R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications w...view more R2-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. This product can be used to bond or protect hardware components that are exposed to aviation fuels or gasoline. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance. It has strong physical attributes which make it bond aggressively to most surfaces. view less | |
| R21-2615 | NuSil Silicone Technology 1 | R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...view more R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. view less | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...view more R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. view less | |
| R3-3930-11 | NuSil Silicone Technology 1 | R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and ...view more R3-3930-11 is a gray, two-part, RTV silicone that can be further dispersed for spraying applications. It has strong physical attributes which make it bond aggressively to most surfaces. It can also be utilized in applications where coating, sealing, and bonding are necessary for fuel and /or solvent resistance.This product can be used to bond or protect hardware components that are exposed to gasoline or aviation fuels. view less | |
| R31-2186 | NuSil Silicone Technology 1 | R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kit...view more R31-2186 is a translucent, thixotropic, silicone adhesive that has a high tear strength and cures at room temperature, and rapidly with the addition of heat. The consistency of this product allows it to be supplied in easy-to-use, airless side-by-side kits that remove the need to mix. It can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as plastics and metals. view less | |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...view more R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). view less | |
| R4-1140 | NuSil Silicone Technology 1 | R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wo...view more R4-1140 is a one-part, self leveling, solvent-free silicone adhesive that cures at room temperature upon exposure to atmospheric moisture. This product bonds aggressively to many surfaces including ceramics, metals, glass, synthetic and natural fibers, wood, painted surfaces, many plastics and other silicone rubbers. view less | |
| R7-3521-11 | NuSil Silicone Technology 1 | R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stop...view more R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stoppers, and O-rings. It can also be used for applications that require a good solvent resistance. view less | |
| SCV-2585 | NuSil Silicone Technology 1 | SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards...view more SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards. It can also perform under a broad temperature range for electronic and space applications. view less | |
| SCV-2586 | NuSil Silicone Technology 1 | SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels an...view more SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels and for applications that require a product with minimal volatility. view less | |
| SCV-2590 | NuSil Silicone Technology 1 | SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from b...view more SCV-2590 is a two-part, clear silicone elastomer that can be used as an adhesive in low strength applications such as solar cell arrays where clarity, and a low volatility are needed. In electronic and space applications it can prevent condensation from building in sensitive devices. This product also features Ultra Low OutgassingTM which exceeds specifications outlined in NASA and the European Space Agency. view less | |
| SCV-2590-2 | NuSil Silicone Technology 1 | SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assem...view more SCV-2590-2 is a black silicone that has low viscosity and can be utilized as an adhesive in optical applications requiring a black material to block light. This product offers a broad operating temperature range and can be used to protect electronic assemblies from extreme temperatures, humidity and radiation. It also features Ultra Low OutgassingTM which makes it ideal to protect sensitive devices from condensation. view less | |
| SCV-2596 | NuSil Silicone Technology 1 | SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other confi...view more SCV-2596 is a two-part, black electrically conductive RTV silicone that can be used for RFI and EMI shielding in electronic and space applications. This product can be used to adhere covers onto housing or for any application where grooves and other configurations require a flowable to limited flow material. It features Ultra Low OutgassingTM which helps it perform under extreme operating conditions and helps avoid condensation in sensitive devices. view less | |
| SCV1-2590 | NuSil Silicone Technology 1 | SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require lo...view more SCV1-2590 is an optically clear silicone system with low viscosity and is a suitable adhesive in applications such as solar cell arrays, where clarity and low volatility are important. It can also be used in space and electric applications that require low outgassing to avoid condensation in sensitive devices. view less | |
| SCV1-2596 | NuSil Silicone Technology 1 | SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI...view more SCV1-2596 is an electrically conductive silicone adhesive/sealant that features Ultra Low OutgassingTM. It can be utilized in applications that require minimal volatile condensables under extreme operating conditions. This product can also be used for RFI and EMI shielding in electrical and space applications and is well suited to for form-in-place conductive gaskets. view less | |
| SCV1-2599 | NuSil Silicone Technology 1 | SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, ...view more SCV1-2599 is a two-part, white, thermally conductive silicone that cures with the addition of heat. It provides heat transfer between electrical/electronic components and their heat sinks. This product can be used to adhere integrated circuit substrates, base plates, heat sinks or where grooves require a non-flowable to limited flow material. view less | |
| SCV2-2590 | NuSil Silicone Technology 1 | SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of ...view more SCV2-2590 is a clear silicone that features Ultra Low OutgassingTM and has a low viscosity. It exceeds low outgas specifications outlined in NASA and the European Space Agency. This product can act as an embedding compound for environmental protection of electronic components. It will protect against extreme temperatures, humidity, radiation, thermal and mechanical stress. view less | |
| SCV2-2599 | NuSil Silicone Technology 1 | SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat...view more SCV2-2599 is a thixotropic, thermally conductive silicone that is designed to allow bond line thicknesses of < or = 50 microns. This product cures with the addition of heat and provides heat transfer between electrical/electronic components and their heat sinks. It can also be used as an adhesive for base plates, integrated circuit substrates, heat sinks or where grooves require a non-flow material. view less | |
| SFM5-2350 | NuSil Silicone Technology 1 | SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibrati...view more SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibration dampening situations that require a lightweight, flexible foam, and provides excellent thermal insulation and radiation resistance. It is useful where stability at higher and lower temperatures is required. view less | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...view more SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| SP-271 | NuSil Silicone Technology 1 | SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition...view more SP-271 is a one component primer that is supplied in VM&P Naphtha and it requires no mixing. It is designed specifically to be used with platinum catalyzed, addition cured systems. This product can help improve the adhesion of platinum catalyzed, addition cured systems to polymethylmethacrylate (PMMA) as well as other various substrates such as glass, metals, ceramics, other silicone materials, and some plastics. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less |
