| BNX® 1000 | Mayzo, Inc. | BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditi...view more BNX® 1000 is a unique proprietary blended liquid antioxidant system. It provides ease in blending and should result in lower loading requirements since it disperses completely, virtually eliminating the particle dispersion problems associated with traditional powder antioxidants. BNX® 1000 is used in hot melt and water base adhesive systems. view less | |
| BENTONE® 1000 | Elementis | BENTONE® 1000 is an organic solventborne derivative of bentonite clay. This highly efficient and cost- effective rheological additive is designed for low- to intermediate polarity organic systems. | |
| MAXGARD® 1000 | Lycus Ltd. | MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption ...view more MAXGARD® 1000 is a light yellow powder UV light stabilizer used for protecting polyurethane coatings, oil paints and acrylic adhesives. This product has a melting point of 195-197°C and a mass density of 1.21 g/cm3 at 25°C. It exhibits a broad absorption band which extends into the UV-A range. view less | |
| SONGSORB® 1000 | Songwon International AG | SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to ...view more SONGSORB® 1000 is a strong absorber of ultraviolet radiation in the 290~400nm region and has a high degree of photostability - photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. Offers ultraviolet light protection to a wide range of polymers. It can be used in combination with phenolic & phosphite antioxidants, and HALS to optimize performance in outdoor use. view less | |
| POLYWAX™ 1000 | Univar Solutions | POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| Glissopal® 1000 | BASF Corporation | Glissopal® 1000 is a polyisobutene that is clear in appearance and highly viscous. An oily liquid that is freely miscible with mineral oils and poly-α-olefins. A homogeneous material with high quality. This material is less viscous than the conventional p...view more Glissopal® 1000 is a polyisobutene that is clear in appearance and highly viscous. An oily liquid that is freely miscible with mineral oils and poly-α-olefins. A homogeneous material with high quality. This material is less viscous than the conventional polyisobutenes, but is still highly viscous when compared to alternative materials. The low molar mass makes this suitable for thickening lubricating oils. Applications include two-stroke engine oils, transmission oils, hydraulic fluids, insulating oils, and metalworking fluids. view less | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...view more Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| Polydo GY-1000 | Kukdo Chemical Co., Ltd. | Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...view more Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. view less | |
| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Dovermulse H-1000 | Dover Chemical Corporation | Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000...view more Dovermulse H-1000 is a dark amber or brown viscous liquid made of a polyisobutylene succinic anhydride prepared from ~950 MW High Reactive PIB and maleic anhydride. It is prepared via the thermal route, so there is no residual chlorine. Dovermulse H-1000 is primarily used as an intermediate for a variety of PIBSA derivatives. view less | |
| Epokukdo KSR-1000 | Kukdo Chemical Co., Ltd. | Epokukdo KSR-1000 is a silicone modified epoxy resin specially designed for silicone modified bisphenol-A type in order to improve heat-resistance when it is properly formulated and cured. KSR-1000 could be used not only in straight epoxy system but also ...view more Epokukdo KSR-1000 is a silicone modified epoxy resin specially designed for silicone modified bisphenol-A type in order to improve heat-resistance when it is properly formulated and cured. KSR-1000 could be used not only in straight epoxy system but also in hybrid system in combination with the polyester resin for very good edge coverage, impact strength, and especially heat-resistance with excellent mechanical and chemical properties. view less | |
| BLACK PEARLS® 1000 | Univar Solutions | BLACK PEARLS® 1000 is a small particle-treated grade designed to enable excellent jet mass tone with strong tinting strength in high-performance automotive, industrial, and architecture coatings. BLACK PEARLS® 1000 specialty carbon black has small particl...view more BLACK PEARLS® 1000 is a small particle-treated grade designed to enable excellent jet mass tone with strong tinting strength in high-performance automotive, industrial, and architecture coatings. BLACK PEARLS® 1000 specialty carbon black has small particles that enable excellent jetness and UV absorption for good exterior durability. It is suitable for use in high-end coatings that require high jetness and strong tinting strength. view less | Request Sample |
| Zephrym PD 1000 | Croda Coatings & Polymers | Zephrym PD 1000 is a low VOC polymeric dispersant. It is used as a non VOC dispersant for inorganic particles in low polarity non-aqueous systems. | |
| ACTFLOW NE-1000 | Kowa American Corporation | ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excel...view more ACTFLOW NE-1000 is apart of a liquid type acrylic polymer grade range. ACTFLOW NE-1000 has an approximate molecular weight of 3000, and a viscosity of 1000 to 1500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| AEPD VOX 1000 | Univar Solutions | AEPD® VOX 1000 neutralizing amino alcohol is a multifunctional additive for low-odor, low-VOC interior water-based paints. The multifunctional nature allows significant reduction in primary dispersant, defoamer, glycols and coalescing agents. . | Request Sample |
| Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into...view more PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into polymer molecules. view less | |
| VERSALINK® P 1000 | Evonik Operations GmbH, BL Comfort & Insulation | VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepol...view more VERSALINK® products are specialty polymeric, non-toxic diamines of different molecular weights for use as curatives and chain extenders in high-performance polyurea and polyurea-hybrid applications. They can be liquid processed with MDI and TDI/MDI prepolymers. Allowing for excellent physical properties, formulations using our VERSALINK® curatives combine the material performance of polyurea with the ease of use that comes with long pot-life of the formulation. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| APMS Fluid A 1000 | Ark (Fogang) Chemicals Industry Co., Ltd. | APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a mod...view more APMS Fluid A 1000 is an Amino terminated polydimethoxysiloxane with the chemical formula (C2H6OSi)nC26H54O5Si2. Primarily used in the production of silicone-polyurethane grafted polymers. It has multiple uses as a sizing agent in glass fibers and as a modifier and curing agent for epoxy resins and coatings. view less | |
| WPA-1000 Paint Proofer | SEI Chemicals | WPA-1000 Paint Proofer increases paint performance by adding long-term water repellency to the paint itself. Paint Proofer also conditions the paint for easier application and greatly improves the fade resistance properties. This water-based, acrylic micr...view more WPA-1000 Paint Proofer increases paint performance by adding long-term water repellency to the paint itself. Paint Proofer also conditions the paint for easier application and greatly improves the fade resistance properties. This water-based, acrylic micro-emulsion additive increases the life, value and performance of all latex paints and stains. view less | |
| MD-1000 Mold Proofer Additive | SEI Chemicals | MD-1000 Mold Proofer Additive is a migrational cross-link within a coating system, which forms a dehydration matrix that does not allow moisture to penetrate. This product prevents a wide variety of molds, fungi and bacterias. It can be used in any inter...view more MD-1000 Mold Proofer Additive is a migrational cross-link within a coating system, which forms a dehydration matrix that does not allow moisture to penetrate. This product prevents a wide variety of molds, fungi and bacterias. It can be used in any interior or exterior products including: paints, coating, wax, stain, preservative, and wallpaper paste. view less | |
| XIAMETER™ PMX-200 Silicone Fluid 1000 CS | Univar Solutions | XIAMETER® PMX-200 Silicone Fluid 1000 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic ...view more XIAMETER® PMX-200 Silicone Fluid 1000 CS is a clear, colorless, medium viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of average kinematic viscosities. This product is is highly soluble in organic solvents and is easily emulsified in water with standard emulsifiers. It may be used as a surface agent or for de-soaping creams and lotions. It spreads easily on both skin and hair and protects the skin, imparting a soft, velvety skin feel. view less | Request Sample |
| KOMERATE D039M | Green Chemical Co., Ltd. | KOMERATE D039M is Polypropylene Glycol 1000 (EO)3 Dimethacrylate(PPG(1000(EO)3DMA). | |
| 1,3,5-Tris[(3,3,3-trifluoropropyl)methyl] cyclotrisiloxane FD-1000 | Zhejiang Feidian Chemical Co., Ltd. | FD-1000 is a 1,3,5-Trimethyl-1,3,5-tris(3,3,3-trifluoropropyl)cyclotrisiloxane. It is supplied in white crystal form. | |
| KOMERATE D159M | Green Chemical Co., Ltd. | KOMERATE D159M is Polypropylene Glycol 1000(EO)15 Dimethacrylate(PPG1000(EO)15DMA). | |
| PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000...view more PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce high flexibility into polymer molecules. view less | |
| VORANOL 220-110N | Univar Solutions | VORANOL 220-110N is a neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| VORANOL 220-110 | Univar Solutions | VORANOL 220-110 is a non-neutralized 1000 molecular weight polyether diol with a hydroxyl number of 110 used across a wide range of applications including adhesives, sealants, coatings, castings, foams and binders. | Request Sample |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...view more Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. view less | |
| SR740A | Sartomer Americas | SR740A is a water solution of polyethylene glycol 1000 dimethacrylate. This product is water soluble and produces soft, flexible films. SR740A offers good adhesion, low shrinkage, high flexibility, high impact strength, and good chemical and water resista...view more SR740A is a water solution of polyethylene glycol 1000 dimethacrylate. This product is water soluble and produces soft, flexible films. SR740A offers good adhesion, low shrinkage, high flexibility, high impact strength, and good chemical and water resistance for sealant, plastisol, elastomer, adhesive, and coating applications. view less | |
| Automated Discharge Systems | Charles Ross & Son Company | A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipm...view more A Ross Discharge System can eliminate wasted hours scraping heavy or sticky materials from a mix vessel. With push-button simplicity, the system can automatically discharge a 1000-gallon batch in minutes — into bulk containers, filling or packaging equipment, an extruder, or a two or three-roll mill. view less |  |
| Micaceous Iron Oxide Red Pigment Red 101 | Hangzhou Epsilon Chemical Co., Ltd. | Micaceous Iron Oxide Red Pigment Red 101 is a red powder pigment with high fastness to light, heat and weather, good anti-corrosion resistance, it doesn't change colors even at 1000?. Micaceous iron oxide red is recommended for anti-corrosion paints and c...view more Micaceous Iron Oxide Red Pigment Red 101 is a red powder pigment with high fastness to light, heat and weather, good anti-corrosion resistance, it doesn't change colors even at 1000?. Micaceous iron oxide red is recommended for anti-corrosion paints and coatings. The fineness available is 500mesh, 600mesh, 800mesh, 1000mesh and 1250mesh. view less | |
| BR-345 | Bomar, formerly Dymax Oligomers & Coatings | BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000...view more BR-345 is a difunctional polyether urethane acrylate that provides unique properties for 3D printing resins. This soft material is ideal for use in applications where high elongation is desired and can be used as an additive for impact resistance. Resins with less than 1000 cps can be formulated with this material when monomer levels are above 50%. view less | |
| Micaceous Iron Oxide Gray Pigment Red 101 | Hangzhou Epsilon Chemical Co., Ltd. | Micaceous Iron Oxide Gray Pigment Red 101 is a graypowder pigment with high fastness to light, heat and weather, good anti-corrosion resistance, it doesn't change colors even at 1000?. Micaceous iron oxide gray is recommended for anti-corrosion paints and...view more Micaceous Iron Oxide Gray Pigment Red 101 is a graypowder pigment with high fastness to light, heat and weather, good anti-corrosion resistance, it doesn't change colors even at 1000?. Micaceous iron oxide gray is recommended for anti-corrosion paints and coatings. The content of Fe2O3 available is 85%, 90%, 93% and 95%, fineness is 60-800mesh accordingly. view less | |
| FRS1600 Furnace Rheometer System | Anton Paar Viscosity & Rheology | FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000...view more FRS1600 Furnace Rheometer System combines a rheometer and a lab furnace for viscosity measurements of melts at temperatures up to 1600°C. This helps ensure a consistent high quality of the final product and to optimize this energy-intensive process. Materials of regular use in everyday life, such as glasses and metals, are processed or refined as melts at temperatures above 1000°C. view less |  |
| ACTFLOW UMM-1001 | Kowa American Corporation | ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and exc...view more ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer replacements, modifying agents and additive agents. view less | Request Sample |
| Capromer™ PD1–10 | BASF SE, Intermediates Division | Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydroly...view more Capromer™ PD1–10 is a polycaprolactone based polyester polyol for polyurethane based coatings. The difunctional product is based on Neopentyl glycol with a molecular weight of 1000. It is used where the unique combination of properties including hydrolytic stability, excellent weatherability, good dynamic characteristics, and outstanding low temperature flexibility is desired. PolyCLO products are designed for use in cast and TPU elastomers, adhesives, reactive diluents, and resin intermediates. view less | |
| EcoFlame APP205 | Unibrom Corp. | EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000...view more EcoFlame APP205 is a white fine particle ammonium polyphosphate that is used in a range of polyethylene, polyolefin blends, thermoplastics, polypropylene, ethylene/vinyl acetate copolymers, coating compounds, hot melt adhesives, and is suitable for both injection molding and extrusion applications. EcoFlame APP205 has a molecular weight of n>1000, a pH value of 6.0 to 8.5, a density of 1.8 kg/L at 25°C, an apparent density of 0.45 kg/L, and an average particle size equal to or less than 16 um. view less | |
| nolax C35.3030 | nolax AG (Vanora) | nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000...view more nolax C35.3030 is a water-born dispersion for water vapor barrier and heat seal coatings on different substrates, and emulates a white transparent and practically odor-free film. With a base of ethylene-copolymer, its suggested use is in metals, carton, polyethylene, paper, and coating to coating. nolax C35.3030 can be applied by roll coating or air knife methods, has a density of approximately 1.0 g/cm³, a viscosity of 200 to 1000 mPa•s at 20°C, a pH value of 7.5 ± 1, and a particle size of approximately 250 nm. view less | |
| Flytac 188-C5 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000...view more Flytac 188-C5 is a kind of thermal plasticizing resin produced by C5, by-products of petroleum cracking, through pretreatment, polymerization and distillation. The major usages are tackifier for pressure sensitive adhesive, because of its well balance PSA properties such as trackness, adhesive strength and cohesive strength. It can also be used in the production of paints, adhesives and in rubber industries. Flytac 188-C5 has an average molecular weight of 1000-2600, a melt viscosity (CPS at 200°C) of 300 max., and a softening point (R&B) of 95-105°C. view less | |
| Amorphous Silica Microspheres & Nanospheres | Cospheric LLC | Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactants or stabilizers. Silane coatings enable silica microspheres to be modified to generate functional groups or alter surface properties. Additional advantage of silica microspheres is glass transition temperature of over 1000...view more Silica microspheres are inherently hydrophillic and negatively charged. These particles provide higher opacity than glass microspheres and are often used as contrast particles. Aqueous suspensions of silica microspheres rarely require the use of surfactants or stabilizers. Silane coatings enable silica microspheres to be modified to generate functional groups or alter surface properties. Additional advantage of silica microspheres is glass transition temperature of over 1000 degrees Celsius, which makes them suitable for high temperature applications. Silica microspheres and nanospheres are composed of synthetic amorphous silica made in a laboratory batch environment. view less | |
| EcoFlame APP201 | Unibrom Corp. | EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000...view more EcoFlame APP201 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP201 has a molecular weight of n>1000, a pH value of 5.5 to 7.0, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. view less | |
| ACTFLOW 1-A | Kowa American Corporation | ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal t...view more ACTFLOW 1-A is apart of a liquid type acrylic polymer range. ACTFLOW 1-A has an approximate molecular weight of 10000, and a viscosity of 1000 to 2000. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as plasticizer replacements, modifying agents and additive agents due to their environmentally sound characteristics as a non-solvent liquid polymer and normal-temperature fluidity. ACTFLOW grades are effectively used as an additive agent to improve the alkali cleaning of resist materials and the removal of residue/sediment in photolithographic processes. Other applications include additives for color filter and dry film resist, and modifying agents for olefin, ABS and cellulose resin. view less | Request Sample |
| EcoFlame APP203 | Unibrom Corp. | EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000...view more EcoFlame APP203 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP203 is also appropriate as acid donor for intumescent coatings and PU foams. It has a molecular weight of n>1000, a pH value of 7.5 to 8.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. view less | |
| EcoFlame APP204 | Unibrom Corp. | EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000...view more EcoFlame APP204 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP204 can be also be favorably used in solvent radical intumescent coatings and in thermoplastics. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. view less | |
| EcoFlame APP202 | Unibrom Corp. | EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000...view more EcoFlame APP202 is a white fine particle ammonium polyphosphate that is largely insoluble in water, completely insoluble in organic solvent, and is non-flammable and non-hygroscopic. It can be used in sealants and adhesives, polyurethane foam (PU rigid, flexible, and rigid integral skin foam), intumescent coatings, cellulose-containing material, and in thermoplastics (PP): where it can be used in casting resin based on unsaturated PET resin and epoxy resin. EcoFlame APP202 can also be used in favorably in intumescent coating for exterior applications where the ammonium polyphosphate is essential to have tremendously low water solubility, in cellulose-containing materials (car’s fireproof cloth, military cellulose materials, paper, and wood), and in numerous polymers for exterior applications. It has a molecular weight of n>1000, a pH value of 6.5 to 7.5, a density of 1.9 kg/L at 25°C, an apparent density of 0.7 kg/L, and an average particle size equal to or less than 15 um. view less |
