UL Prospector

Success!

Successfully saved your search
Microbrite 2 Micronized Products Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in coating, adhesive, and mastic...view more Microbrite 2 is a refined and milled crystalline anhydrous sodium potassium aluminium silicate. This product has been separated, washed, refined, and milled to product a clean, white, low iron content end product. Microbrite 2 is most commonly used in coating, adhesive, and mastic applications. view less
Plextol R 123 Synthomer Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher...view more Plextol R 123 is an acrylic copolymer dispersion. This product has a total solids content of 60% and a viscosity of 300 mPa.s. Plextol R 123 is most commonly used in exterior elastomeric wall coating, caulk, mastic, and sealant applications where higher alkali and water-resistance is required. view less
RAYFLEX® 2024 Specialty Polymers, Inc. RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...view more RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. view less
Texicryl® 13-023 Scott Bader Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considered for use in mastic...view more Texicryl® 13-023 is a high performance water resistant binder used in the making of ceramic tile adhesives. Because of its special emulsifier system, it can be used with various fillers like silicas and calcium carbonate. Texicryl® 13-023 can be considered for use in mastic formulations, glass fiber bonding tapes and adhesives for expanded polystyrene tiles. It displays good water handling capabilities and offers adhesive bonds high strength. view less
Request Sample Proxel™ CMC-E Preservative Lonza Proxel™ CMC-E Preservative is an antibacterial and antifungal preservative for aqueous industrial compositions such as adhesives, tackifiers, dispersed pigments, sealants, mastics, caulks, paints, coatings and other building materials.
RC 84 CINKARNA RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster...view more RC 84 is a micronized, rutile titanium dioxide pigment. This product has been lattice-stabilized with alumina and surface treated with aluminum and silicon compounds. It can be used in dispersion paints, wallpaper coatings, mastics and sealants, plaster and silicon paints. view less
LX®-1200, 130 Neville Chemical Company LX®-1200, 130 is an inert thermoplastic hydrocarbon resin flake. This product is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks, metallic litho printing inks and aluminum paint.
Pangel AD Tolsa, S.A. Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastic...view more Pangel AD is a rheological additive that is manufactured from high purity sepiolite. It controls system flow and consistency for components such as solvents and fillers. It can be used in water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants, and mastics. view less
Cimsil G30 Tolsa, S.A. Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastic...view more Cimsil G30 is an attapulgite based additive developed to modify the rheology of wet and dry joint compounds and adhesives. It is developed to improve sag resistance of the compound before drying or setting. It can be used in wet and dry joint fillers, spackle compounds, crack fillers, mastics, and sealants. view less
RAYFLEX® 765 Specialty Polymers, Inc. RAYFLEX® 765 is anionic elastomeric styrene acrylic emulsion. This product is intended for several different outdoor coatings. The primary use of RAYFLEX® 765 is for flexible roof coatings, textured finishes and wall mastics. Using this product to formula...view more RAYFLEX® 765 is anionic elastomeric styrene acrylic emulsion. This product is intended for several different outdoor coatings. The primary use of RAYFLEX® 765 is for flexible roof coatings, textured finishes and wall mastics. Using this product to formulate a coating offers stretchable strength, elongation properties, low temperature flexibility and outstanding water resistance. view less
LX®-1200 Neville Chemical Company LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, constructi...view more LX®-1200 is an inert thermoplastic hydrocarbon resin. This product promotes wetting of pigments and fillers, improves tack and bond strength in adhesives and enhances leafing and brilliance in metallic paints and inks. It is applied to mastics, construction and flooring adhesives, high solids solvent-borne alkyd based coatings, litho printing inks and aluminum paint. view less
LX®-2161 Resin Neville Chemical Company LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastic...view more LX®-2161 Resin is an inert thermoplastic hydrocarbon resin of amber flakes that enhances the wetting of pigments and fillers, improves tack and bond strength in adhesives and are soluble in aliphatic solvents and vegetable oils. They can be applied to litho printing inks and high solids solvent-borne alkyd based coatings in addition to mastics, construction and flooring adhesives. view less
Pangel S9 Tolsa, S.A. Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastic...view more Pangel S9 is a powdered rheological additive made from sepiolite for use in aqueous systems. It controls the system flow and consistency of components including solvents and fillers. It can be used for asphalt sheets and emulsions, anti-corrosion coatings, water-based paints, foundry coatings, friction elements, gaskets, epoxy adhesives, sealants and mastics, and additives for cement and gypsum systems. view less
Microsil 200 Tolsa, S.A. Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastic...view more Microsil 200 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. view less
Microsil 100 Tolsa, S.A. Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastic...view more Microsil 100 consists of inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. view less
Microsil 200S Tolsa, S.A. Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastic...view more Microsil 200S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, putties and mastics, and tile adhesives. view less
Microsil 100S Tolsa, S.A. Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastic...view more Microsil 100S consists of coated inert microspheres obtained by thermal treatment at high temperatures, which creates a hard glass crust around a hollow space filled by air. It is designed to be used in applications where particle size is not a limiting factor that also require a lower viscosity or smaller absorption. It can be used as joint filler for drywall and gypsum boards, cement boards, mortars and stuccos, bitumen membranes for waterproofing, asphalt emulsions, resin based waterproofing coatings, textural paint, putties and mastics, and tile adhesives. view less