| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...view more Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...view more Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...view more Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. view less | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...view more Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. view less | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...view more Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. view less | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...view more Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. view less | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...view more Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. view less | Request Sample |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA-NCO-6 is a solventborne dispersion of flatting agents in mineral sprits. It provides simple stir-in incorporation, uniform and efficient gloss reduction and consistency. | |
| Chemisnow® MZ-10HN | Kowa American Corporation | Chemisnow® MZ-10HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-12H | Kowa American Corporation | Chemisnow® MZ-12H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-16H | Kowa American Corporation | Chemisnow® MZ-16H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-20HN | Kowa American Corporation | Chemisnow® MZ-20HN is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| Chemisnow® MZ-30H | Kowa American Corporation | Chemisnow® MZ-30H is a cross-linked acrylic dispersed particle. It is highly cross linked, has excellent solvent resistance, and has a middle size distribution range. It is used as a light diffusing agent and a paint matting agent. | Request Sample |
| GENOMER* 7287 | Rahn USA Corp. | GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very low gloss coatings on plastic packaging; flexo inks; wood coatings; and screen inks. The low viscosity allows a high load of matting agent. The matting...view more GENOMER* 7287 is a specialty resin for radically curable inks and coatings. It has been developed for the use in matte UV curing inks and coatings. This product is recommended for use in the following applications: very low gloss coatings; sprayable, very low gloss coatings on plastic packaging; flexo inks; wood coatings; and screen inks. The low viscosity allows a high load of matting agent. The matting effect is only achieved when GENOMER* 7287 is combined with other oligomers or monomers. view less | Request Sample |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN N 87 | Hoffmann Mineral | SILLITIN N 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 85 | Hoffmann Mineral | SILLITIN V 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| SILLITIN N 85 PURISS | Hoffmann Mineral | SILLITIN N 85 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLIKOLLOID P 87 PURISS | Hoffmann Mineral | SILLIKOLLOID P 87 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL VM 56 | Hoffmann Mineral | AKTISIL VM 56 is an activated SILLITIN Z 86, produced by modifying the surface with Vinyl-triethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL VM 56/89 | Hoffmann Mineral | AKTISIL VM 56/89 is an activated SILLITIN Z 89, produced by modifying the surface with 3-Vinyltriethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTISIL PF 777 | Hoffmann Mineral | AKTISIL PF 777 is an activated SILLITIN Z 86, produced by modifying the surface with alkyl silane. Used as a functional filler alone by itself, or in combination with rheological additives and/or flatting agents. | |
| AKTISIL MAM-R | Hoffmann Mineral | AKTISIL MAM-R is an activated SILLITIN V 85, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Baristar® Zero | Minerals Girona S.A. | Baristar® Zero has an oil absorption DOP of 10g/100g and a top cut of 40µm. Barium sulphate is of high purity and has an excellent grade of brightness. It is specifically designed as a matting agent for the paint industry. | |
| AKTISIL MAM | Hoffmann Mineral | AKTISIL MAM is an activated SILLITIN V 88, produced by modifying the surface with 3-methacryloxypropyl-trimethoxy silane. Can be used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTIFIT VM | Hoffmann Mineral | AKTIFIT VM is an activated SILFIT Z 91 that can be used as a functional filler either on its own or combined with extenders or matting agents. The best effect is achieved in binder systems which polymerize or cure due to a radically initiated reaction. | |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting...view more PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. view less | |
| VINAVIL® 5844 | VINAVIL Americas Corp. | VINAVIL® 5844, in the form of a clear, non-tacky film, is an anionic/non-ionic acrylic core-shell copolymer emulsion that can be used in caulks and roof coatings. It can also be used in wood flatting paints and primers, pressure-sensitive adhesives, floo...view more VINAVIL® 5844, in the form of a clear, non-tacky film, is an anionic/non-ionic acrylic core-shell copolymer emulsion that can be used in caulks and roof coatings. It can also be used in wood flatting paints and primers, pressure-sensitive adhesives, floor adhesives, and cementitious waterproofing membranes. This product is water-resistant. view less | |
| Talkron® ST 20 | Minerals Girona S.A. | Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting...view more Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 20µm. view less | |
| Talkron® ST 30 | Minerals Girona S.A. | Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting...view more Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. It has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 30µm. view less | |
| Talkron® ST 40 | Minerals Girona S.A. | Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting...view more Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 40µm. view less | |
| VINAVIL® 5722 | VINAVIL Americas Corp. | VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in wa...view more VINAVIL® 5722, in the form of a transparent, flexible and tacky film, is an anionic/nonionic styrene/acrylic copolymer emulsion that can be used as a binder for organic adhesives and as a mortar additive for the cement industry. It can also be used in waterproofing membranes, wood flatting and primers, and in pressure-sensitive adhesives. view less | |
| Sylosphere | Fuji Silysia Chem. Ltd. | Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, ...view more Sylosphere is a fine powdered silica used as a matting agent in paints and an anti-blocking additive in plastics and has been used under the name of Sylysia for years. Furthermore, as in Sylysia, the adsorptive nature, viscosity, holding characteristics, and dispersivity characteristics are also found in Sylosphere. Sylosphere is used in plastics, paper and ink, in paints, and in cosmetics and perfume. view less | |
| Mirel™ M Grade Resins | Metabolix | Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powder form for matting...view more Mirel™ Virgin biobased PHA resins range from crystalline to amorphous. They can be used as binders in solvent based paints, coatings, and Inks. They are soluble in many industrial solvent systems. Mirel™ Virgin biobased PHA resins can also be used in powder form for matting etc. In aqueous formulations, Mirel™ Virgin biobased PHA resins are biodegradable in soil and in marine and fresh water environments. view less | |
| 200W™ | Univar Solutions | 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grout...view more 200W™ is a coarse particle size, dry ground marble with a white color and low binder demand. The low binder demand permits very high loading levels in applications such as carpet backing and textured paints. This corase product finds applications in grouts, ceramics, and coatings. view less | Request Sample |
| Chemisnow® MX-80H3wT | Kowa American Corporation | Chemisnow® MX-80H3wT is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-150 | Kowa American Corporation | Chemisnow® MX-150 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-180 | Kowa American Corporation | Chemisnow® MX-180 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-300 | Kowa American Corporation | Chemisnow® MX-300 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-500 | Kowa American Corporation | Chemisnow® MX-500 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-1000 | Kowa American Corporation | Chemisnow® MX-1000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-2000 | Kowa American Corporation | Chemisnow® MX-2000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MX-3000 | Kowa American Corporation | Chemisnow® MX-3000 is a cross-linked acrylic mono-dispersed particle. It has a very narrow distribution range and is used as a light diffusing agent and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-1HG | Kowa American Corporation | Chemisnow® MR-1HG is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-2G | Kowa American Corporation | Chemisnow® MR-2G is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-5C | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® MR-7GC | Kowa American Corporation | Chemisnow® MR-5C is a cross-linked acrylic particle that has a broad distribution range. It is used as a light diffusing agent, a painted surface modifying agent, and a film surface modifying agent. | Request Sample |
| Chemisnow® SX-130H | Kowa American Corporation | Chemisnow® SX-130H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-350H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SX-500H | Kowa American Corporation | Chemisnow® SX-350H is a crosslinked polystyrene mono-dispersed particle. This product is used as a light diffusing agent for AG (anti-glare) film. | Request Sample |
| Chemisnow® SGP-70C | Kowa American Corporation | Chemisnow® SGP-70C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Chemisnow® SGP-150C | Kowa American Corporation | Chemisnow® SGP-150C is a polystyrene particle that has low, medium, and high crosslinking levels available. This product is used as a low shrinking agent for FRP. | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...view more Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. view less | Request Sample |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...view more AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. view less | |
| PAT-ADD DA 1814 | Patcham USA | PAT-ADD DA 1814 is an anionic dispersing additive for Solventborne paints, inks, colorants, and ambient curing plastic systems. It is multifunctional and compatible in a wide range of medium to high polarity solventborne systems. This product is particularly effective as dispersant for mixed pigment formulations to prevent float and flood. Main benefits are: prevents pigment float and Benard-cell formation, prevents pigment flood and silking, contributes to proper orientation of aluminum pigments and matting...view more PAT-ADD DA 1814 is an anionic dispersing additive for Solventborne paints, inks, colorants, and ambient curing plastic systems. It is multifunctional and compatible in a wide range of medium to high polarity solventborne systems. This product is particularly effective as dispersant for mixed pigment formulations to prevent float and flood. Main benefits are: prevents pigment float and Benard-cell formation, prevents pigment flood and silking, contributes to proper orientation of aluminum pigments and matting agents, and optimizes the milling process, enabling higher pigment loadings. view less | |
| Fumed Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting...view more Fumed silica is a high value-added fine chemical product; it is a white, loose, amorphous, non-toxic, non-polluting inorganic non-metallic oxide.The primary particle size betweens 7 ~ 40nm and the specific surface area is generally greater than 100m2 / g. Because of its nano-effects, in the material the fumed silica exhibits excellent properties of reinforcing, thickening, thixotropic, insulation, matting, anti-sagging, which are widely used in the silicone rubber (polyester plastics, sealing materials,etc.), siliconeglue (adhesives,paints,coatings,etc.)and high-performance fibers, new synthetic unsaturated resin, electric insulation, inks, pharmaceuticals, paper, food, cosmetics, chemical mechanical polishing, etc., to be known as the "industrial MSG". view less | |
| POLYWAX™ 400 | Univar Solutions | POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 500 | Univar Solutions | POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 850 | Univar Solutions | POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...view more POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 1000 | Univar Solutions | POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 2000 | Univar Solutions | POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ 3000 | Univar Solutions | POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...view more POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ EP-700 Copolymer | Univar Solutions | POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density ...view more POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| POLYWAX™ EP-1100 Copolymer | Univar Solutions | POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density...view more POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. view less | Request Sample |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...view more CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. view less | Request Sample |
| AQUASET 110 | Univar Solutions | AQUASET 110 is a 50% solids binder made without formaldehyde or formaldehyde-generating materials, engineered for fiberglass webs used in roofing, flooring, specialty mats, and HVAC filters. It can also be used for bonding other substrates such as cellulo...view more AQUASET 110 is a 50% solids binder made without formaldehyde or formaldehyde-generating materials, engineered for fiberglass webs used in roofing, flooring, specialty mats, and HVAC filters. It can also be used for bonding other substrates such as cellulose, carbon, ceramic and high-temperature polyester fibers. view less | Request Sample |
