| MelaminebyOCI™ GPH | OCI MELAMINE | MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame reta...view more MelaminebyOCI™ GPH, in the form of a white crystalline powder, is a melamine. This product has a particle size that is below 350 microns and has been produced by the gas-phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less | |
| MelaminebyOCI™ SLP | OCI MELAMINE | MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, l...view more MelaminebyOCI™ SLP, in the form of a fine grade white crystalline powder, is a melamine. This product has a particle size that is below 180 microns and has been produced by the shortened-liquid phase process. It can be used in coatings, adhesive resins, laminates, and flame retardants. view less | |
| MelaminebyOCI™ GPH-LD | OCI MELAMINE | MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 mic...view more MelaminebyOCI™ GPH-LD, in the form of a white crystalline powder, is a melamine. This product can be used in coating, adhesive resins, laminates, molding compounds, and flame retardants, among other uses. It has a particle size that is smaller than 60 microns and has been produced in a low-density gas-phase process. view less | |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...view more ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. view less | Request Sample |
| Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone | BASF SE, Intermediates Division | Ethylene urea, N,N'-Ethyleneurea, 2-Imidozolidone is effective formaldehyde scavenger in amino-resins like urea-formaldehyde (UF), melamine-formaldehyde (MF) or melamine-urea-formaldehyde (MUF) condensates. | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| StanChem SC 6141 | StanChem Polymers | StanChem SC 6141 is a low molecular weight hydroxyl functional acrylic dispersion designed for cure with melamine or isocayanate crosslinking agents or used alone as a temporary, removable coating. | Request Sample |
| StanChem SC 6445 | StanChem Polymers | StanChem SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine. | Request Sample |
| 4731-X-80 High Solids Polyester Resin | Gabriel Performance Products | 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels. | |
| ACRYSOL™ WS-68 | Univar Solutions | ACRYSOL™ WS-68 is a colloidal dispersion that, when formulated with monomeric melamine resins, facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties. This product offers high gloss and DOI ...view more ACRYSOL™ WS-68 is a colloidal dispersion that, when formulated with monomeric melamine resins, facilitates the formulation of industrial baking enamels that offer excellent spray characteristics and film properties. This product offers high gloss and DOI properties. view less | Request Sample |
| SiSiB® PC2520 | SiSiB SILICONES | SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyuretha...view more SiSiB® PC2520 is a light amber paste. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. view less | |
| StanChem SC 6458 | StanChem Polymers | StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine ...view more StanChem SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine binders. view less | Request Sample |
| 4892-SD-50 Epoxy Ester | Gabriel Performance Products | 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enam...view more 4892-SD-50 Epoxy Ester is a tall oil fatty acid type epoxy ester intended for cross linking with melamine or urea-formaldehyde resins. This product gives excellent adhesion to metals and good intercoat adhesion when formulated into baking primers and enamels. view less | |
| SiSiB® PC2521 | SiSiB SILICONES | SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine...view more SiSiB® PC2521 is a colorless transparent liquid with an alcohol-like odor. It is a bifunctional organosilane having a reactive organic ureido group and a hydrolyzable inorganic triethoxysilyl group. It can be used with such polymers as epoxy, phenolic, furan and melamine resins, polyurethanes, PA, PBT, PE, EVA, PP, PVB, PVAC, acrylics, and silicones; as a size constituent of finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins for foundry resins and abrasives; as an additive for sealants and adhesives; or as an additive and/or primer for paints and varnishes to improve adhesion to the substrate. view less | |
| CHS-Epoxy 101 X 60 | Spolchemie | CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine...view more CHS-Epoxy 101 X 60 is a Gardner colored solution of epoxy resin. It has 60 percent xylene solution of a higher molecular weight esterified epoxy resin. This product is primarily used for manufacturing an air-dry coating or stove coatings, in combination with melamine-formaldehyde resins. view less | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...view more 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. view less | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...view more Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. view less | |
| 4-Hydroxybutyl vinyl ether (HBVE) | BASF SE, Intermediates Division | 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine...view more 4-Hydroxybutyl vinyl ether (HBVE) is a building block for macro monomers and monomer for vinyl copolymers, reactive diluents for UV coatings. Ethoxylatated HBVE is used as a monomer for concrete additive. Used for water and solvent based hydroxyfunctional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono | BASF SE, Intermediates Division | 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine...view more 1,4-Cyclohexane dimethanol mono vinyl ether, CHDM Mono is a building block for macro monomers and monomer for vinyl copolymers. It is a reactive diluent in UV-coatings and in adhesives. It is used for water and solvent based hydroxyl-functional vinyl polymers, which are cross-linked with polyisocyanates and melamine resins. view less | |
| Melapol 1010-60 B | Polidur San Luis | Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short,...view more Melapol 1010-60 B is a butylated melamine-formaldehyde resin at 60% in xilol-isobutanol. This product provides medium reactivity, good final hardness in stoving enamels and good compatibility with alkyd resins. It is for use in stoving enamels with short, medium and long oil alkyds and stoving enamels with epoxy esters. view less | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine...view more 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. view less | |
| ALQUIMEX SC-60X | Polimeros Sinteticos, S.A de C.V | The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine...view more The chain stopped Alkyd of soybean oil diluted in xylene, owns excellent characteristics of fast drying, high brightness, durability outdoors. For automotive painting formulation of fast and finished drying, of high brightness. Can be mixed with resins in solution and resins of urea, and melamine, to obtain finished from greater hardness by baked systems. view less | |
| Melapol 1040-60 B | Polidur San Luis | Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enam...view more Melapol 1040-60 B is a butylated melamine-formaldehyde resin at 60% in butanol. This product provides high reactivity, excellent gloss and nivelation in stoving enamels and good compatibility with hydroxylated acrylic resins. It is for use in stoving enamels combined with short, medium and long oil alkyds and stoving enamels combined with acrylic resins and epoxy esters. view less | |
| VINAVIL® K60 | VINAVIL Americas Corp. | VINAVIL® K60, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine...view more VINAVIL® K60, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| VINAVIL® K70 | VINAVIL Americas Corp. | VINAVIL® K70, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine...view more VINAVIL® K70, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, and solvent-based adhesives. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| Lonzamon™ AATMP | Arxada | Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine...view more Lonzamon™ AATMP is an acetyl acetonate trimer used for the modification of adhesives, sealants, and coating applications. It provides lower viscosity and better adhesion to any surface. The multitude of possible reaction pathways as a cross linker offers a broad versatility for various application fields. At the active methylane group, Lonzamon™ AATMP has a reaction with melamine, aldehyde, isocyanates, and diazonium salts. At the carbonyl group, it has a chelation reaction and an enamine formation. view less | |
| VINAVIL® K50 | VINAVIL Americas Corp. | VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine...view more VINAVIL® K50, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| VINAVIL® K55 | VINAVIL Americas Corp. | VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine...view more VINAVIL® K55, in the form of a transparent bead, is a solid homopolymer that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| VINAVIL® K40 | VINAVIL Americas Corp. | VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine...view more VINAVIL® K40, in the form of a transparent bead, is a solid homopolymer of vinyl acetate that can be used in primers, finish paints, solvent-based adhesives, and as a binder in printing inks. This product is compatible with a wide range of plasticizers, resins, pigments, extenders or dyestuffs in order to obtain a variety of final product formulations. Compatible ingredients include phenol, urea, or melamine precondensates, inorganic pigments, calcium carbonate, calcium sulfate dihydrate, wood sawdust, mica and cork. view less | |
| PAT-ADD LE 1040 | Patcham USA | PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefits are: first choice for stoving systems, highly effective leveling additive, wide compatibility, reduces coefficient of friction (COF), reduces risk of pigment float, and effective in epoxies, acrylic and polester melamine...view more PAT-ADD LE 1040 is a levelling agent for use in waterborne and polar solvent-borne coatings. PAT-ADD LE 1040 is mainly used in industrial coatings. PAT-ADD LE 1040 enhances flow and levelling and provides slip and mar resistance optimisation. Main benefits are: first choice for stoving systems, highly effective leveling additive, wide compatibility, reduces coefficient of friction (COF), reduces risk of pigment float, and effective in epoxies, acrylic and polester melamine resin based industrial paints. view less | |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine...view more EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. view less | Request Sample |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamine...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less | |
| ACRYSOL™ I-62 A | Univar Solutions | ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine...view more ACRYSOL™ I-62 A is an alkali-soluble acrylic copolymer which has broad utility as a dispersant for organic and inorganic pigments. As a pigment dispersant, it offers excellent dispersion for whites and a variety of deep-tone formulations. It is especially useful in formulations designed for thermosetting applications. It is a waterborne colloidal dispersion containing both carboxylic acid and hydroxyl functionality, and as such will crosslink with melamine-formaldehyde or urea-formaldehyde resins, thereby becoming part of the polymer matrix and improving the film properties. view less | Request Sample |
| PAT-ADD LE 1030 | Patcham USA | PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first choice for PUR systems, excellent substrate wetting and air release, effective leveling agent for water borne and polar solvent systems, wide range of compatibilty, strong surface tension reduction, reduces risk of pigment float, and effective in PUR, acrylic and polyester melamine...view more PAT-ADD LE 1030 is a levelling agent for use in waterborne and polar solvent-borne coatings PAT-ADD LE 1030 is mainly used in industrial coatings. PAT-ADD LE 1030 enhances flow and levelling, substrate wetting and air release. Main benefits are: first choice for PUR systems, excellent substrate wetting and air release, effective leveling agent for water borne and polar solvent systems, wide range of compatibilty, strong surface tension reduction, reduces risk of pigment float, and effective in PUR, acrylic and polyester melamine industrial paints. view less | |
| Phenoxy PK™HP-80 | Gabriel Performance Products | Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine...view more Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. view less | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine...view more Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine...view more Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine...view more Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine...view more Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. view less | |
| SiSiB® PC1951 | SiSiB SILICONES | SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inorganic trimethoxysilyl groups. It can be used as a primer or additive and for the chemical modification of sealants and adhesives; as a size constituent or finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine...view more SiSiB® PC1951 is a colorless to slight yellowish liquid with a light amine-like odor, that is soluble in alcohols, and aliphatic or aromatic hydrocarbons. It is a bifunctional organosilane possessing a reactive secondary amino group and hydrolyzable inorganic trimethoxysilyl groups. It can be used as a primer or additive and for the chemical modification of sealants and adhesives; as a size constituent or finish for glass fiber/glass fabric composites; as an additive to phenolic, furan and melamine resins used in foundry resins; for pretreatment of fillers and pigments used in mineral-filled polymers; as a primer and additive to improve the adhesion of paints and coatings to the substrate; as an endcapper for polyurethanes; or as starting material in the synthesis of amino-functional silicones. view less | |
| SiSiB® PC1118 | SiSiB SILICONES | SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine...view more SiSiB® PC1118 is a yellowish clear liquid with an amine-like odor. It may act as an adhesion promoter between inorganic materials and organic polymers, as a surface modifier and for chemical modification of substances. It can be used in applications including a size constituent or finish for glass fiber/glass fabric composites; metal primer; as an additive to phenolic resin binders in mineral fiber insulating materials and abrasives; as an additive to phenolic, furane and melamine resins; a primer or additive in sealants and adhesives; mineral-filled polymers (composites) or HFFR cables; pretreatment of fillers and pigments; improvement of adhesion to the substrate in paints and coatings; improvement of flexural strength, tensile strength, impact strength and modulus of elasticity; or resistance to moisture and corrosion. view less | |
| SiSiB® PC1108 | SiSiB SILICONES | SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural strength, tensile strength, impact strength and modulus of elasticity; moisture and corrosion resistance; adhesion; or filler dispersion. It can be used for applications including glass fiber/glass fabric composites; metal primers; as additive to phenolic resin binders for mineral fiber insulating materials and abrasives; as additive to phenolic, furane and melamine...view more SiSiB® PC1108 is a yellowish clear liquid with an amine-like odor. It may act as an adhesive promoter between inorganic materials and organic polymers, as a surface modifier, or for chemical modification of substrates. It can be used to improve flexural strength, tensile strength, impact strength and modulus of elasticity; moisture and corrosion resistance; adhesion; or filler dispersion. It can be used for applications including glass fiber/glass fabric composites; metal primers; as additive to phenolic resin binders for mineral fiber insulating materials and abrasives; as additive to phenolic, furane and melamine resins; as a primer or additive in sealants and adhesives; as mineral-filled polymers (composites) or HFFR cables; as pretreatment of fillers and pigments; or for improvement of adhesive to the substrate in paints and coatings. view less | |
| Phenoxy PK™HM-301 | Gabriel Performance Products | Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine...view more Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. view less | |
| SiSiB® PC1200 | SiSiB SILICONES | SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine...view more SiSiB® PC1200 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. It is used as an adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone polymers, or as a crosslinker (moisture crosslinking of polymers). It may be used as an effective coupling agent for clay reinforced elastomers such as natural and nitrile rubber, to improve physical and dynamic properties; as a coupling agent for mineral reinforced nylon 6, nylon 6/6 and polybutyleneterephthalate, to increase the flexural and tensile strength of the thermoplastic composite; as a fiberglass finish or a resinous additive for fiberglass reinforced phenolic, melamine and epoxy thermoset composites; as mineral binders in foundry and abrasive composite applications, to improve adhesion, increase composite strength; as a glass and metal primer, to improve the adhesion of many coatings (urethanes, epoxies, phenolics and others) to glass and metal surfaces; or as an adhesion promoter in polysulfide, polyvinyl chloride plastisol, silicone two part urethane and epoxy adhesives and sealants. view less | |
| 4646-X-50 Epoxy Ester | Gabriel Performance Products | 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes. | |
| Superchlon® 822S | PhibroChem | Superchlon® 822S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamine...view more Superchlon® 822S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds. This product appears as a yellow pellet. view less | Request Sample |
| Superchlon® 930S | PhibroChem | Superchlon® 930S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamine...view more Superchlon® 930S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. It has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds at low baking temperatures. This product appears as a pale-yellow to light brown pellet. view less | Request Sample |
| Superchlon® JF421S | PhibroChem | Superchlon® JF421S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. Superchlon® JF421S has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamine...view more Superchlon® JF421S is a pellet-type chlorinated polypropylene, mainly used for “primer coating for polypropylene substrates”. Superchlon® JF421S has an excellent adhesion to polypropylene and gives an excellent adhesion to top coats based on polyurethanes, acrylics, melamines, epoxies, and alkyds at low baking temperatures. This product appears as a pale-yellow to light brown pellet. view less | Request Sample |
| RAYCORE® 9506A | Specialty Polymers, Inc. | RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfa...view more RAYCORE® 9506A is anionic hydroxyl functional polyurethane-acrylic core shell hybrid. This product is intended to offer chemical, scratch and UV resistance. It has the ability to be cross-linked with isocyanates or melamines. It is intended for hard surfaces and to produce scratch resistance. This product primarily is used for topcoat chemical, water and scratches resistance on hard wood and cement surfaces. view less |
