| L911P Plasticizer | Chemceed | Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in a...view more Linear 911P is a plasticizer used when low-temperature flexibility is required or for specific end-use applications that require unique processing where the performance requirements cannot be met with branched plasticizers. 911P is especially useful in anti- fogging coatings, automotive sealants, and shoe polish. view less | |
| K-FLEX® 975P Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response of the base emulsion to the plasticizer...view more K-FLEX® 975P is economical to use and designed to offer a broad range of compatibility with polar polymers, with improved handling due to its lower freeze point. It improves elastomeric and adhesion characteristics, demonstrating strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). It also improves wet tack, suppresses Tg, extends open times, and reduces set times in adhesives. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| K-FLEX® 850S Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable option for food packaging adhesives. In both VAE an PVAc emulsions, K-FLEX 850S provides excellent performance properties, such as wet tack, extended open times, chalk point/Tg suppression, reduced set times, and strong viscosity response of the base emulsion to the plasticizer...view more K-FLEX® 850S is optimized for performance, compatibility, and economy in waterborne latex applications. It is a very effective for waterborne adhesives, as well as hot melt adhesives and putty. With FDA approvals for direct food contact, it is a viable option for food packaging adhesives. In both VAE an PVAc emulsions, K-FLEX 850S provides excellent performance properties, such as wet tack, extended open times, chalk point/Tg suppression, reduced set times, and strong viscosity response of the base emulsion to the plasticizer (demonstrating compatibility and allowing flexibility). Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| K-FLEX® DP Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...view more K-FLEX® DP is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. In adhesives applications, such as putty and water-based latex adhesives, K-FLEX DP is an effective, low-VOC choice. It also offers easier handling due to its extremely low freeze point. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| K-FLEX® PG Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesi...view more K-FLEX® PG is a non-phthalate, dibenzoate plasticizer, which achieves excellent performance and compatibility in waterborne adhesives, latex caulks, and reactive sealants, including acrylic, VAE, PVAc, STPE, and STPU types chemistries, food contact adhesives, and pressure sensitive adhesives. Benefits include good flexibility, viscosity response, and adhesion (even to challenging substrates), extended open times, reduced set times, improved wet tack, and enhanced weatherability. K-FLEX PG offers an excellent chemistry and regulatory profile and has no GHS label requirements in the U.S. and Europe. Like K-FLEX DP, K-FLEX PG has an extremely low freeze point, which results in easier handling. However, K-FLEX PG offers improved economy. It can be used at higher loading levels in waterborne adhesives without degrading performance. Ask LANXESS for more information about this product’s applicability to EU Ecolabel claims. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| K-FLEX® 850P Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 850P is a blend of dibenzoate plasticizers similar in composition to K-FLEX® 850S (DEGDB rich) that is designed for both vinyl and waterborne latex applications. Emerald Kalama Chemical was acquired by LANXESS in 2021. | |
| K-FLEX® 500 Plasticizer | LANXESS (former Emerald Performance Materials) | K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adh...view more K-FLEX® 500 is a classic blend of traditional dibenzoate plasticizers that optimizes the excellent performance of K-FLEX DP with improved handling, due to its low freeze point. It is an excellent choice for use in hot melt adhesives, water-based latex adhesives, and latex caulks. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| Alkylsulfonic Acid Ester of Phenol Plasticizer | Beijing Entrepreneur Science &Trading Co., Ltd. | Alkylsulfonic acid ester of phenol is a common environmental friendly plasticizer.It possess excellent plasticizing and saponifying effect are suitable for various types of polymers such as PU and PVC. | |
| RHOPLEX™ WP-1 | Univar Solutions | RHOPLEX™ WP-1 is a plasticizer. | Request Sample |
| TRIDECANOL (TRIDECYL ALCOHOL) | KH Neochem Americas, Inc. | Intermediate for plasticizer, detergent and polymer additive. | |
| Dibutyl Phthalate (DBP) | Chemceed | Dibutyl phthalate (DBP) is a plasticizer used in applications such as adhesives, lacquers and printing inks. Dibutyl phthalate can be used as a secondary plasticizer with other phthalates for highly concentrated PVC compounds. | |
| 3,5,5-TRIMETHYL HEXANOL (NONANOL) | KH Neochem Americas, Inc. | Intermediate for cosmetics, fragrance, detergent, lubricant and plasticizer. | |
| 2-ETHYL HEXANOIC ACID | KH Neochem Americas, Inc. | Intermediate for metal soap, plasticizer, detergent, alkyd resin, acid chloride and cosmetics. | |
| ISONONANOIC ACID (KYOWANOIC - N) | KH Neochem Americas, Inc. | Intermediate for metal soap, plasticizer, detergent, alkyd resin, acid chloride and cosmetics. | |
| Dioctyl Terephthalate (DOTP) | Chemceed | Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacque...view more Dioctyl Terephthalate (DOTP) is a general purpose plasticizer, and can be used as a phthalate replacement. As a PVC plasticizer, DOTP is used in formualtions of screen printing inks. Additionally, DOTP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. view less | |
| Dioctyl Phthalate (DOP) | Chemceed | Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, ad...view more Dioctyl Phthalate (DOP) is a general use Plasticizer. As a PVC plasticizer, DOP is used in formualtions of screen printing inks. Known for its good stability to heat and ultraviolet light, DOP can be used in applications such as paints, lacquers, inks, adhesives, and sealants. view less | |
| Diisononyl Phthalate (DINP) | Chemceed | Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling pain...view more Diisononyl Phthalate (DINP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DINP is used in formualtions of screen printing inks. Additionally, DINP can be used in applications such as anti-corrosion paints, anti-fouling paints, lacquers, inks, adhesives, and sealants. view less | |
| Diisodecyl Phthalate (DIDP) | Chemceed | Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coat...view more Diisodecyl Phthalate (DIDP) is a general use high molecular weight Plasticizer. As a PVC plasticizer, DIDP is used in formualtions of screen printing inks. Additionally, DIDP can be used in applications such latex coatings, printing inks, textile coatings, paper coatings, and leather coatings, inks, adhesives, and sealants. view less | |
| VINNAPAS® DP 500 | Wacker Chemical Corporation | VINNAPAS® DP 500 is an aqueous, plasticizer-free polymer dispersion produced from vinyl acetate monomer. | Request Sample |
| VINNAPAS® DP 600 | Wacker Chemical Corporation | VINNAPAS® DP 600 is an aqueous, plasticizer-free polymer dispersion produced from vinyl acetate monomer. | Request Sample |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| Dioctyl Adipate (DOA) | Chemceed | Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipat...view more Dioctyl adipate (DOA) is a PVC plasticizer that is also commonly used with primary plasticizers, like DOP, to create lubricant basetocks. Dioctyl adipate is also used in paints as a way to disperse pigments. For applications involving food, dioctyl adipate can be used as a plasticizer in food contact polymers and rubbers. view less | |
| VINNAPAS® EP 740 | Wacker Chemical Corporation | VINNAPAS® EP 740 is an aqueous plasticizer-free, 55% dispersion of a copolymer of vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 11 | Wacker Chemical Corporation | VINNAPAS® EP 11 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 14 | Wacker Chemical Corporation | VINNAPAS® EP 14 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 17 | Wacker Chemical Corporation | VINNAPAS® EP 17 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 400 | Wacker Chemical Corporation | VINNAPAS® EP 400 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 401 | Wacker Chemical Corporation | VINNAPAS® EP 401 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| VINNAPAS® EP 441 | Wacker Chemical Corporation | VINNAPAS® EP 441 is an aqueous, plasticizer-free polymer dispersion produced from the monomers vinyl acetate and ethylene. | Request Sample |
| REGALREZ 1018 | Univar Solutions | REGALREZ 1018 is a highly stable, light colored, low molecular weight, nonpolar liquid resin suggested for use in plastics modification, adhesives, coatings, sealants, and caulks. Due to its fully hydrogenated cycloaliphatic structure and low softening point it is useful as a plasticizer in systems where low color and thermal stability are primary concerns and plasticizer...view more REGALREZ 1018 is a highly stable, light colored, low molecular weight, nonpolar liquid resin suggested for use in plastics modification, adhesives, coatings, sealants, and caulks. Due to its fully hydrogenated cycloaliphatic structure and low softening point it is useful as a plasticizer in systems where low color and thermal stability are primary concerns and plasticizer migration must be minimized. view less | Request Sample |
| VINNAPAS® EAF 67 | Wacker Chemical Corporation | VINNAPAS® EAF 67 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene and acrylate. | Request Sample |
| Diisodecyl Adipate (DIDA) | Chemceed | Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl ...view more Diisodecyl Adipate (DIDA) is a plasticizer with excellent low-temperature properties. DIDA works well as a part of a plasticizer blend, and is compatible with PVC, Cellulose acetate butyrate, Ethyl cellulose, Nitrocellulose, Polychloroprene,and Polyvinyl butyral. In inks and coatings, DIDA can soften binders to improve flexibility. DIDA can also be used in used in adhesives, caulk, sealants, and paint to improve properties. view less | |
| VISIOMER®Terra C13-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C13-MA is a hydrophobic methacrylate monomer with very low Tg. It is ideal for use as flexibilizer and internal plasticizer. | |
| ProFlex 4 | P.A.T. Products | ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylo...view more ProFlex 4 is N-Butylbenzene sulfonamide (BBSA). ProFlex 4 is a liquid sulfonamide plasticizer for a number of resins. These resins include polyacetals, polycarbonates, polysulfones, and polyamides. ProFlex 4 is a particularly effective plasticizer of Nylon-11 and Nylon-12. The addition of this plasticizer contributes to, improved mold release, improved machining, better finish, reduced water absorption, improved shape stability, and heat stability to 80 °C (176 °F). ProFlex 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Applications include packaging, A/C hoses, filaments, lubrication hoses, air brake tubing, and vacuum / hydraulic tubing. view less | Request Sample |
| VISIOMER®Terra C17,4-MA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER®Terra C17,4-MA is a hydrophobic methacrylate monomer with low Tg . It can be used as flexibilizer and internal plasticizer in coatings and reactive resins applications. | |
| DIBUTYL PHTHALATE (DBP) | Aekyung Petrochemical Co., Ltd. | DIBUTYL PHTHALATE (DBP) is a common plasticizer for PVC. This product is highly compatible with other resins. It is used in construction materials, paint, adhesives, and lubricants. | |
| VISIOMER® EHMA | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® EHMA is hydrophobic methacrylate monomer with low Tg. Used as flexibilizer and internal plasticizer. It is also an excellent co-monomer in coatings and adhesive applications. | |
| Trioctyl Trimellitate (TOTM) | Chemceed | Trioctyl Trimellitate (TOTM) is a non-phthlate plasticizer that is useful in adhesives and epoxies. It is compatible with chlorinated rubber, epichlorohydrin, hydrogenated nitrile, hydrogenated rubber, polychloroprene and polyvinyl chloride. | |
| Viplex 200 | Atmos Technologies | Viplex 200 is a general purpose extender or secondary plasticizer with a moderate viscosity used in flexible PVC, polyurethane elastomers, rubber, and epoxies. Applications include concrete crack repair and more. | |
| ACRONAL® V 275 NA | BASF Dispersions & Resins | ACRONAL V 275 NA is a high solids acrylic used in flooring adhesives and specialty sealants. It offers high cohesive strength, good plasticizer resistance, and filler acceptance. This product is ammonia free. | |
| Polythf® 1800 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1800 is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1800 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1800 introduces high flexibility into polymer molecules. | |
| Benzyl Benzoate, USP | Chemceed | Benzyl Benzoate is a high solvating benzoate ester plasticizer that can be used in applications such as adhesives, caulks, and sealants. In inks and coatings, Benzyl Benzoate can soften binders to improve flexibility. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| Polythf® 1400 (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1400 is building block for plasticizer, and soft segment of poly-urethane dispersions. Polymers with PolyTHF® 1400 are suitable for plastic-, foil- and leather coatings. PolyTHF® 1400 introduces high flexibility into polymer molecules. | |
| PICCOLASTIC A-5 | Univar Solutions | PICCOLASTIC A-5 is hydrocarbon resin is a low molecular weight, light colored, nonpolar, hydrocarbon resin derived from pure styrene monomer. It is commonly used in adhesives, coatings, plastics modification and rubber compounding, particularly as a plasticizer...view more PICCOLASTIC A-5 is hydrocarbon resin is a low molecular weight, light colored, nonpolar, hydrocarbon resin derived from pure styrene monomer. It is commonly used in adhesives, coatings, plastics modification and rubber compounding, particularly as a plasticizer or softener. view less | Request Sample |
| PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF...view more PolyTHF® 250 techn. (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment for polyurethane dispersions. Polymers with PolyTHF® 250 techn. are suitable for plastic-, foil- and leather coatings. PolyTHF® 250 techn. introduces flexibility into polymer molecules. view less | |
| PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S int...view more PolyTHF® 650 S (Polytetrahydrofurane) Polytetramethylene ether glycol is building block for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 650 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 650 S introduces flexibility into polymer molecules. view less | |
| Pycal® 94 | Croda Coatings & Polymers | Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thi...view more Pycal® 94 is a plasticizer for emulsion adhesives. It has a number of characteristics which make it unique among polyvinyl acetate plasticizers. It has a thickening effect on polyvinyl acetate emulsions, thus reducing or eliminating the need for other thickening agents. view less | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polymer ST 61 LV | Evonik Operations GmbH, BL Silanes | Polymer ST 61 LV is a plasticizer-free product which addresses the same formulation properties as Polymer ST 61. Its viscosity is approx. 70 % less, thus it allows quicker dosing, lower formulation viscosities and higher possible filler loading levels. | |
| Polythf® 1000, 1000 S (Polytetrahydrofurane) polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into...view more PolyTHF® 1000 and 1000 S are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 1000 and 1000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce flexibility into polymer molecules. view less | |
| Ketjenflex® 6 | Axcentive Sarl | Ketjenflex® 6 is a toluene sulfonamide in the form of a white crystalline powder. It is used as a plasticizer in inks, adhesives, and coatings. Ketjenflex® 6 can be used with resins such as nitrocellulose, polyamide, PVAC, rosin, epoxy, and more. | |
| Phosflex® 362 | Univar Solutions | Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also red...view more Phosflex® 362 is a highly efficient plasticizer for PVC, with very good low-temperature flexibility and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 362 is its ability to reduce flammability while also reducing smoke. view less | Request Sample |
| HCCFlex SP-390 | Hanwha Chemical Corporation | HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers a...view more HCCFlex SP-390 is a Non-phthalate plasticizer made of Dioctyl Terephthalate (DOTP) which is non-carcinogenic and contains no environmental hormones. It is well suited for use in the production of films, sheets, leathers, flooring materials, wall papers and wire coatings. view less | |
| Glycerine 99.7% | Acme Hardesty Co. | Glycerine 99.7% is one of the most versatile and safest chemicals available. It is used as an intermediate, softener and a plasticizer. This product can be either shipped in as small as a few drums or as large as a rail-car. | |
| FORALYN 5020 F | Univar Solutions | FORALYN 5020 F is a methyl ester of hydrogenated rosin, is a light amber liquid resin having marked resistance to aging with minimal odor and are used as a resinous plasticizer or tackifier in finished products such as adhesives, inks, and lacquers. | Request Sample |
| Polimer 3100 | Polidur San Luis | Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylat...view more Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylated oligomer. view less | |
| Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the syn...view more Dibenzothiazole Disulfide MBTS (DM) is a plasticizer and delay agent in the production of chloroprene rubbers and sealants. It is provided as a gray-white to light yellow powder or granule, it is usually used together with secondary accelerator in the synthesis of polymers. view less | |
| PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol | BASF SE, Intermediates Division | PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. ...view more PolyTHF® 2000, 2000 S (Polytetrahydrofurane) Polytetramethylene ether glycol are building blocks for plasticizer, and soft segment of polyurethane dispersions. Polymers with PolyTHF® 2000 and 2000 S are suitable for plastic-, foil- and leather coatings. PolyTHF® 1000 and 1000 S introduce high flexibility into polymer molecules. view less | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construct...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less | |
| SPUR+ 1015 prepolymer | Momentive Performance Materials | SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and constructi...view more SPUR+ 1015 prepolymer is a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Plasticizer-free and of relatively low viscosity, it is an excellent base resin for low modulus sealants in building and construction applications where good elastic recovery is required. view less | |
| Hanwha DINP (Diisononyl Phthalate) | Hanwha Chemical Corporation | Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...view more Hanwha DINP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. view less | |
| Hanwha DIDP (Diisodecyl Phthalate) | Hanwha Chemical Corporation | Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials...view more Hanwha DIDP is a transparent plasticizer made of Diisononyl Phthalate with excellent viscosity and outstanding electrical insulation. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. view less | |
| Dioctyl Sebacate (DOS) | Chemceed | Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and o...view more Dioctyl Sebacate (DOS) is a phthalate-free plasticizer used for PVC, nitrocelluloses, styrene resins, and synthetic rubbers where low temperature performance is required. It is soluble in hydrocarbons, alcohols, ester, chlorocarbons, ether, benzene and other organic solvents. DOS is recommended for use in adhesives and sealants. view less | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications whe...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and applications where higher tensile strength is required. view less | |
| Alkipol 469-100 | Polidur San Luis | Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking pa...view more Alkipol 469-100 is a long oil alkyd resin at 100% of solids. This product provides good pigment wetting, good air dry and final film hardness and very good abrasion resistance. Alkipol 469-100 is a vehicle for milling and a plasticizer for road marking paints. view less | |
| Hanwha DOP (Dioctyl Phthalate) | Hanwha Chemical Corporation | Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring mat...view more Hanwha DOP is a transparent plasticizer made of Dioctyl Phthalate with excellent viscosity and outstanding compatibility with other resins. It is well suited for use in the production of films, sheets, leathers, wire coatings, wall papers and flooring materials where ever cold, light and chemicals resistance is required. view less | |
| Refined Dibenzothiazole Disulfide | Hainan Zhongxin Chemical Co., Ltd. | Refined Dibenzothiazole Disulfide is a light yellow powder or granule that is primarily used as a as plasticizer and delay agent in chloroprene rubbers and sealants. It is commonly combined with a secondary accelerator in the synthesis of polymers. Refin...view more Refined Dibenzothiazole Disulfide is a light yellow powder or granule that is primarily used as a as plasticizer and delay agent in chloroprene rubbers and sealants. It is commonly combined with a secondary accelerator in the synthesis of polymers. Refined Dibenzothiazole Disulfide has improved scorch safety compared to MBT. view less | |
| Phosflex® 390 | Univar Solutions | Phosflex® 390 is isodecyl diphenyl phosphate made from synthetic feedstock. It is a highly efficient plasticizer for PVC, with very good low-temperature flexibility, and excellent solvating properties for fast fusion. One of the unique characteristics of ...view more Phosflex® 390 is isodecyl diphenyl phosphate made from synthetic feedstock. It is a highly efficient plasticizer for PVC, with very good low-temperature flexibility, and excellent solvating properties for fast fusion. One of the unique characteristics of Phosflex® 390 is its ability to reduce flammability while also reducing smoke. view less | Request Sample |
| Ketjenflex® 8 | Axcentive Sarl | Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coa...view more Ketjenflex® 8 is a toluene sulfonamide in the form of a clear, slightly yellow liquid. It is used as a plasticizer and adhesion promoter in inks, adhesives, and coatings. Ketjenflex® 8 can be used with applications such as PVAC, nitrocellulose, powder coatings, synthetic polyamides, epoxy coatings and adhesives, and more. view less | |
| Ketjenflex® 9S | Axcentive Sarl | Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wo...view more Ketjenflex® 9S is a toluene sulfonamide in the form of white crystalline powder. It is used as a reactive plasticizer in coatings and adhesives and provides fungicidal activity in coatings. Ketjenflex® 9S can be used in melamine laminates and coatings, wood adhesives, epoxy and polyurethane coatings and adhesives, and other applications. view less | |
| Dibutyl Sebacate (DBS) | Chemceed | Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibuty...view more Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals. view less | |
| SPUR+ 1050 prepolymer | Momentive Performance Materials | SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in ind...view more SPUR+ 1050 prepolymer is a silylated prepolymer, plasticizer-free, with low viscosity, for use in the manufacture of one-part, moisture-curing sealants. It is an excellent material of choice as a base resin for medium modulus sealants and adhesives in industrial and transportation applications where higher tensile strength is required. view less | |
| Dibutyl Maleate (DBM) | Chemceed | Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Othe...view more Dibutyl Maleate (DBM) is a plasticizer for vinyl resins, and is used for copolymers applications involving PVC and vinyl acetates. Dibutyl Maleate is an unsaturated ester which is used for creating sulfosuccinate surfactants in detergents and paints. Other applications of DBM include use in plastisols, dispersions, coatings, adhesives, and synthetic lubricants. view less | |
| CHS-Epoxy RR 300 | Spolchemie | CHS-Epoxy RR 300 is a reactive diluent for epoxy resin systems. This product is made up of polypropylene glycol diglycidyl ether. CHS-Epoxy RR 300 is primarily used as a reactive diluent solvent with lower ability to dilute. It has low toxicity and can also act as a plasticizer...view more CHS-Epoxy RR 300 is a reactive diluent for epoxy resin systems. This product is made up of polypropylene glycol diglycidyl ether. CHS-Epoxy RR 300 is primarily used as a reactive diluent solvent with lower ability to dilute. It has low toxicity and can also act as a plasticizer. view less | |
| Domide G-700 | Kukdo Chemical Co., Ltd. | Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based mainten...view more Domide G-700 is a reactive semisolid Polyamide Rresin which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. Also, it is used as hot-melt plasticizer. Also it is well suited for use in production of solvent-based maintenance coatings, primers, sealers and coatings for concrete. view less | |
| Jagroplast-BR | Alnor Oil Company, Inc. | Jagroplast-BR is an ester plasticizer, in the form of a yellowish liquid, derived from castor oil and providing low temperature flexibility and low viscosity. This product can be used in adhesives, candles, coatings, cosmetics, soaps, hydraulic fluids, in...view more Jagroplast-BR is an ester plasticizer, in the form of a yellowish liquid, derived from castor oil and providing low temperature flexibility and low viscosity. This product can be used in adhesives, candles, coatings, cosmetics, soaps, hydraulic fluids, inks, lacquers, lubricants, metal working fluids, personal care items, plastics & plasticizers, polishes, and textiles. view less | |
| SPUR+ 1060 prepolymer | Momentive Performance Materials | SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve...view more SPUR+ 1060 prepolymer is a plasticizer-free, ethoxysilane-modified resin used in the manufacture of one-part moisture-curing adhesives and sealants. It is an excellent material of choice as a base resin for medium modulus adhesives and sealants that serve a range of applications, particularly where HAPs emissions are a significant factor. view less | |
| Butyl Benzyl Phthalate (BBP) | Chemceed | Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP...view more Butyl Benzyl Phthalate (BBP) is a is high solvating, fast fusing plasticizer with high efficiency which can be used with a variety of resins. BBP is used for many PVC calendaring and extrusion operations and is an industry standard for vinyl flooring. BBP also finds use in many coatings, inks, adhesives, and caulks. view less | |
| Poliuret 750-60 XD | Polidur San Luis | Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyu...view more Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyurethane lacquers for wood, metal lacquers and concrete floors sealers. view less | |
| Phosflex® 375 | Univar Solutions | Phosflex® 375 is a proprietary plasticizer blend containing an alkyl diphenyl phosphate and a triaryl phosphate ester to offer both reasonable plasticizing performance in addition to enhanced flame retardant properties. This mixture is useful in several P...view more Phosflex® 375 is a proprietary plasticizer blend containing an alkyl diphenyl phosphate and a triaryl phosphate ester to offer both reasonable plasticizing performance in addition to enhanced flame retardant properties. This mixture is useful in several PVC applications including wallcovering, transparent sheet goods, laminated products, or any other flexible vinyl composite requiring a high degree of flame retardancy. view less | Request Sample |
| Poliuret 778-75 AE | Polidur San Luis | Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose plasticizer...view more Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose plasticizer por laminating inks and adhesives, front and laminating inks and inks for application on rubber and plastics. view less | |
| Epoxidized Soybean Oil (ESO) | Chemceed | Epoxidized Soybean Oil (ESO) is used as a co-plasticizer for flexible PVC applications, as well as a secondary heat and light stabilizer. In addition, ESO acts as an acid scavenger for soy-based inks, agricultural chemicals, and insecticides. ESO can be u...view more Epoxidized Soybean Oil (ESO) is used as a co-plasticizer for flexible PVC applications, as well as a secondary heat and light stabilizer. In addition, ESO acts as an acid scavenger for soy-based inks, agricultural chemicals, and insecticides. ESO can be used as a pigment dispersion agent, chemical intermediate, and in lubricants and cutting oils. view less | |
| Tetradecanedioic Acid (DC14S) | Cathay Industrial Biotechnology | Tetradecanedioic Acid (DC14S), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)12COOH. It has recommended applications in polyamide and polyester resins, plasticizer...view more Tetradecanedioic Acid (DC14S), in the form of a white powder or flake, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)12COOH. It has recommended applications in polyamide and polyester resins, plasticizer diesters, powder coatings, hot melt adhesives, and more. view less | |
| CHS-Epoxy 324 | Spolchemie | CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambi...view more CHS-Epoxy 324 is a medium molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 324 is primarily used as a bonding agent for adhesive and construction sealants. view less | |
| Undecanedioic Acid (DC12S) | Cathay Industrial Biotechnology | Undecanedioic Acid (DC12S), in the form of a white powder, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)10COOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, polyamide and polyester resins, powder coatings, plasticizer...view more Undecanedioic Acid (DC12S), in the form of a white powder, is dibasic acids which is a family of organic compounds, also known as ‘long-chain dicarboxylic acids’, and has a chemical formula of HOOC(CH2)10COOH. It has recommended applications in corrosion inhibitors, hot melt adhesives, polyamide and polyester resins, powder coatings, plasticizer diesters, and more. view less | |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer...view more POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. view less | Request Sample |
| Ketjenflex® 12 | Axcentive Sarl | Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl com...view more Ketjenflex® 12 is a citrate based clear liquid. It is used as a partially bio-based plasticizer for inks, adhesives, and coatings. Ketjenflex® 12 can be used in vinyl formulations such as PVC plastics, vinyl flooring, solution vinyl resins, wood vinyl compounds, and PVC based plastisols. It can also be used in PVC based polymers, nitrocellulose resins, and cyanoacrylate adhesives. view less | |
| ProFlex 9S | P.A.T. Products | ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts ...view more ProFlex 9S is a is a toluene sulfonamide based reactive plasticizer used in Melamine laminates, Coatings, and Adhesives. ProFlex 9S is a basic starting material in the preparation of high pressure melamine formaldehyde based laminates. ProFlex 9S imparts improved impact resistance, reduced shrinkage and wrap of the hardened laminate. ProFlex 9S can also be used in low pressure melamine formaldehyde laminates, urea formaldehyde resins, and as reactive plasticizer in epoxy, polyurethane, and melamine based resins. In addition, systems reacted with ProFlex 9S show improved resistance to oils, solvents, and moisture. ProFlex 9S has good UV and thermal stability. In coatings it imparts fungicidal activity. Applications include melamine based laminates, melamine based coatings, melamine/urea formaldehyde wood adhesives, phenol/resorcinol formaldehyde wood adhesives, epoxy coating and adhesives, polyurethane coating and adhesives, raw material for fluorescent pigments, and brightening agent for metal plating. view less | Request Sample |
| ACTFLOW UMM-1001 | Kowa American Corporation | ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer...view more ACTFLOW UMM-1001 is apart of a liquid type acrylic polymer grade range. ACTFLOW UMM-1001 has an approximate molecular weight of 1000, and a viscosity of 6500 to 9500. Due to its environmentally sound characteristics as a non-solvent liquid polymer and excellent normal temperature fluidity, ACTFLOW grades are recommended as a plasticizer replacements, modifying agents and additive agents. view less | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer...view more POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. view less | Request Sample |
| POLYVEST® eCO MA 75 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessibl...view more POLYVEST® eCO MA 75 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO MA 75 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO MA 75 Bio brings the same well-known performance but has reduced carbon emissions. The polar, hydrophobic hydrocarbon resin POLYVEST® eCO MA 75 Bio is a highly reactive binder featuring characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers, good compatibility with long-oil alkyd resins, rosin resins and zinc resonates. POLYVEST® eCO MA 75 Bio is used in adhesives and sealants compositions, electrical insulations, and potting compounds (2pack systems), polymeric chalk activator in EPDM-compounds, modifier in carbon black filled EPDM-compounds, modifier in silica filled rubber compounds, modifier in rubber compounds for car tires, modifier in silicone sealants, and many more. view less | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...view more POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. view less | Request Sample |
| Dimethyl Sebacate (DMS) | Chemceed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...view more Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. view less | |
| Polisat 738-65 X | Polidur San Luis | Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer...view more Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer. view less | |
| CHS-Epoxy 455 | Spolchemie | CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient...view more CHS-Epoxy 455 is a low molecular weight solvent-free epoxy bonding agent with non-phthalate modifier. This product viscosity is modified by non-reactive, non-phthalate plasticizer. It is able to dry at two different levels at either an elevated or ambient temperature. CHS-Epoxy 455 is primarily used for modifying, saturating, condensing and preserving and in particular, electrical, electronic, building and civil engineering. view less | |
| Acetyl Tributyl Citrate (ATBC) | Chemceed | Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics...view more Acetyl Tributyl Citrate (ATBC) is a used as a biodegradable plasticizer for PVC and cellulose derivates, and it is approved for food contact materials and can even been used as a food additive. ATBC is also used as an emollient for personal care/cosmetics products such as aerosol hair sprays and nail polishes. In addition, ATBC can be used for pharmaceutical coatings (USP grade available), lubricants, and inks. view less | |
| REAXIS® C248D | Reaxis Inc. | REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acryl...view more REAXIS® C248D is a clear liquid form of an organotin blended in a plasticizer. It is used mainly in esterification and polycondensation reactions. Made of Dibutyltin Oxide, REAXIS® C248D is well suited for the transesterification of vinyl acetate or acrylic acid copolymers, the synthesis of alkyd and polyester resins, as well as the production of polycarbonates, electrodeposition coatings. REAXIS® C248D is typically used at concentrations ranging from 0.01 - 0.5 wt% at 90 - 260°C. view less | |
| DO-8110 | Dover Chemical Corporation | DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer...view more DO-8110 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. DO-8110 can also be used as a plasticizer or as an additive in EP metalworking packages. view less | |
| Paroil® 45 | Dover Chemical Corporation | Paroil® 45 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 45 can also be used as a plasticizer...view more Paroil® 45 is a thick yellowish liquid made from a chlorinated olefin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 45 can also be used as a plasticizer or as an additive in EP metalworking packages. view less | |
| Paroil® 152 | Dover Chemical Corporation | Paroil® 152 is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 152 can also be used as a plasticizer...view more Paroil® 152 is a thick yellowish liquid made from a chlorinated paraffin compound with a medium carbon chain and contains a trace amount of stabilizer to maintain product integrity during transport and storage. Primarily used for drawing and stamping applications, Paroil® products can be considered as a cost effective alternatives for brominated flame retardants in coatings and adhesives. Paroil® 152 can also be used as a plasticizer or as an additive in EP metalworking packages. view less |
