| LA-400 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction an...view more LA-400, a glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (24). LA-400 has a specific gravity of 2.45, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.47 to 1.51. view less | |
| LA-500 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-500, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (25). LA-500 has a specific gravity of 2.5, a bulk density of 45 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-600 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-600, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (27). LA-600 has a specific gravity of 2.5, a bulk density of 43 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-700 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-700, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (28). LA-700 has a specific gravity of 2.5, a bulk density of 40 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| LA-800 | Glassfillers.com (A unit of Vitrominerals Inc.) | LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ra...view more LA-800, a high brightness glass powder, is an oxide that is combined in an amorphous state in a calcium aluminosilicate glass. Under a microscope, LA Glass powder particles are transparent, angular-shaped, with like dimensions in the x, y and z axis. X-ray diffraction and scanning electron microscopy indorses that the LA Glass calcium aluminosilicate powders contain no crystalline silica and are fully amorphous. LA Glass powders improve a wide range of plastics, paints, adhesives, and coatings. Stain/scrub resistance, tint retention, and high consistent brightness can be attained in most coating and paint systems. LA Glass powders can be effortlessly dispersed in solvent- or water- based systems and has low oil absorption (29). LA-800 has a specific gravity of 2.5, a bulk density of 35 lb/ft3, a pH of 10.5, and a refractive index of 1.51. view less | |
| Baybond® PU 330 | Covestro | Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. G...view more Baybond® PU 330 has anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fiber sizes. It is commonly used as the filmforming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent filmforming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| SiSiB® PC1220 | SiSiB SILICONES | SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne...view more SiSiB® PC1220 is a colorless, strongly alkaline liquid with amine smell being very sensitive to hydrolysis. It is a diamino-functional silane capable of providing adhesion and elougation and flexibility at the polymer-substrate interface. It is used to promote adhesion between glass, mineral and metal surfaces; as reinforcements, fillers and substrates; and with resins that react with amino groups in systems such as PVC plastisol, polyurethane, or epoxy-based adhesives and sealant, or in phenolic and epoxy molding compounds. It can be used in waterborne systems such as latex coatings, adhesives, and sealants; as an adhesion promoters in polysulfide, polyvinyl chloride plastisol, silicone two-part urethanes and epoxy adhesives and sealants; as an additive for cold-curing phenolic and furan foundry resins to improve the flexural strength of the sand-resin composites; as a starting material in the synthesis of amino-functional silicones; or as an adhesion promoters in one-part silylated urethane adhesives and sealants. view less | |
| Baybond® XL 825 | Covestro | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Coapur™ 520 W | Arkema Rheology & Specialty Additives | Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve s...view more Coapur™ 520 W is a solvent-free and APEO-free HEUR thickener. It provides a very balanced rheology profile contributing to high-shear viscosities and medium-shear viscosities. As a consequence it provides a very good leveling in satin paints and improve significantly spattering resistance while offering also some antisettling properties. Furthermore, it provides very good response and efficiency in VAE binders. This new polyurethane thickener could therefore easily replace the use of a combination of high-shear and low-shear thickeners. view less | Request Sample |
| Coapur™ 980 W | Arkema Rheology & Specialty Additives | Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...view more Coapur™ 980 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. view less | Request Sample |
| Coapur™ XS 22 | Arkema Rheology & Specialty Additives | Coapur™ XS 22 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It has been especially designed to offer a good reactivity with alkyd emulsion systems. | Request Sample |
| HYBRIDUR® 580 Polymer Dispersion | Evonik Operations GmbH, BL Crosslinkers | HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain re...view more HYBRIDUR® 580 Polymer Dispersion is an acrylic-urethane hybrid polymer dispersion. Cost-effective alternative to standard polyurethane dispersions. Provides outstanding adhesion to a wide variety of substrates, superior abrasion, and chemical and stain resistance. view less | Request Sample |
| EXOCOAT™ AM | Axcentive Sarl | EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down v...view more EXOCOAT® AM by Axcentive is a water-based, doped nano-titanium oxide sol with a strong antimicrobial effect and anatase structure. It prevents the build-up of microbes as the photocatalytic effect results in effective radical formation which breaks down viruses and bacteria. It eradicates viruses such as influenza, SARS-COV-2, dengue & hepatitis and bacteria such as E. coli, MSRA, streptococcus, listeria, pneumonia, and salmonella. It is activated by light and displays quick drying at room temperature. Spray application is recommended to reach thin monolayers. It exhibits curing at room temperature up to 300°C and super hard particles (1GPa Vickers). It is easy to apply & durable, allowing longer disinfection intervals while preserving hygiene level. It shows non-silver leaching, efficacious even under low light conditions, lower service frequency, and no need for frequent disinfection routine. It is used in the state-of-the-art continuous antimicrobial coating for high-traffic areas. EXOCOAT® AM is suitable for topcoats for any surface inside buildings, stores, hospitals, and vehicles. The shelf life of this product is 9 months. view less | |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Rheotech™ 1800 | Arkema Rheology & Specialty Additives | Rheotech™ 1800 is an associative thickener providing a Newtonian rheology profile. Compared to similar HASE-type thickeners, Rheotech™ 1800 shows a unique visco-elastic balance, with a smooth transition towards flow as more shear is applied. It provides t...view more Rheotech™ 1800 is an associative thickener providing a Newtonian rheology profile. Compared to similar HASE-type thickeners, Rheotech™ 1800 shows a unique visco-elastic balance, with a smooth transition towards flow as more shear is applied. It provides the paints with a liquid-to-creamy appearance while showing outstanding flow ability. Belonging to a high-performing product line, Rheotech™ 1800 meets the most advanced requirements: efficiency, optimized rheology profile, ease of use, pigment compatibility, versatility, and water resistance. view less | Request Sample |
| Rheotech™ 3300 | Arkema Rheology & Specialty Additives | Rheotech™ 3300 is a hydrophobically modified alkali swellable acrylic based associative thickener. Compared with Rheotech™ 2000, it provides more in–can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it i...view more Rheotech™ 3300 is a hydrophobically modified alkali swellable acrylic based associative thickener. Compared with Rheotech™ 2000, it provides more in–can viscosity, and is thus recommended for use in interior and exterior flat dispersion paints, where it imparts excellent rheological balance between high and low shear viscosities with low dosage. Rheotech™ 3300 therefore improves brush load and film build, spattering, and sag-levelling compromise. Rheotech™ 3300 is an ethoxylated nonylphenols-free alternative to Rheotech™ 3000. view less | Request Sample |
| AKTIFIT Q | Hoffmann Mineral | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...view more AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). view less | |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...view more Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. view less | Request Sample |
| Ecodis™ C 30 | Arkema Rheology & Specialty Additives | Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to ...view more Ecodis™ C 30 has been especially developed as a lighter-colored version of Ecodis™ P 30 with limited color evolution upon storage. It ensures the complete dispersion of extenders and inorganic pigments at high solids contents in systems showing medium to high PVC. view less | Request Sample |
| Ecodis™ N | Arkema Rheology & Specialty Additives | Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration...view more Ecodis™ N is a cost effective dispersant recommended for use in matt dispersion paints. It contributes to shorten the time needed for a proper incorporation of usual fillers and pigments (calcium carbonate, titanium dioxide) even when a high concentration in solids is required. Ecodis™ N also helps to ensure long term viscosity stability to dispersion paints showing a high solids content and/or a high PVC (pigment volumic concentration). view less | Request Sample |
| Ecodis™ P 30 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves the same performance as the...view more Ecodis™ P 30 MB is the Mass Balance version of the Ecodis™ P 30 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 30 MB achieves the same performance as the Ecodis™ P 30 and can be readily used and implemented as a direct drop-in. view less | Request Sample |
| Ecodis™ P 50 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 50 MB is the Mass Balance version of the Ecodis™ P 50 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 50 MB achieves the same performance as the...view more Ecodis™ P 50 MB is the Mass Balance version of the Ecodis™ P 50 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 50 MB achieves the same performance as the Ecodis™ P 50 and can be readily used and implemented as a direct drop-in. view less | Request Sample |
| Ecodis™ P 90 MB | Arkema Rheology & Specialty Additives | Ecodis™ P 90 MB is the Mass Balance version of the Ecodis™ P 90 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 90 MB achieves the same performance as the...view more Ecodis™ P 90 MB is the Mass Balance version of the Ecodis™ P 90 with a Bio-attributed content of 100%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Ecodis™ P 90 MB achieves the same performance as the Ecodis™ P 90 and can be readily used and implemented as a direct drop-in. view less | Request Sample |
| Coapur™ 6050 | Arkema Rheology & Specialty Additives | Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear ra...view more Coapur™ 6050 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). Designed for fine rheological adjustment of flat or semi-gloss paints. It is characterised by its excellent thickening at low shear rates. view less | Request Sample |
| Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...view more Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. view less | Request Sample |
| Rheotech™ 3500 | Arkema Rheology & Specialty Additives | Rheotech™ 3500 is highly recommendable for the rheology adjustment of semi-gloss and matt dispersion paints. It provides an improved rheological behaviour to semi-gloss and matt dispersion paints. Thanks to its associative character, It is also highly eff...view more Rheotech™ 3500 is highly recommendable for the rheology adjustment of semi-gloss and matt dispersion paints. It provides an improved rheological behaviour to semi-gloss and matt dispersion paints. Thanks to its associative character, It is also highly effective at medium and high shear rates. In particular, it is the ideal tool in order tomatch a given Stormer viscosity (medium shear viscosity). Therefore, compared to cellulosic ethers, it provides both better in-can appearance and coating properties: the better control of the medium shear viscosity allows to reinforce the in-can consistency, thus the perceived quality of the paint. It can be used in combination with other thickeners, either those effective at low shear rates (e.g cellulosic ethers and acrylic thickeners such as Viscoatex™ 730 or Thixol™ 53 L), or those providing a Newtonian rheology (e.g polyurethane thickeners such as Coapur™ 3025). view less | Request Sample |
| Viscoatex™ 46 | Arkema Rheology & Specialty Additives | Viscoatex™ 46 avoids the formation of syneresis and sagging in paints and adhesives. In pigments and extender dispersions (pigment pastes or slurries), the use of Viscoatex™ 46 avoids settling. | Request Sample |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...view more Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. view less | Request Sample |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...view more Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. view less | Request Sample |
| Rheotech™ M 02 | Arkema Rheology & Specialty Additives | Rheotech™ M 02 is a highly effective associative acrylic based thickener specifically designed for putty and textured coatings formulations Rheotech™ M 02 provides high viscosities at low and medium shear rates and outstanding resistance to crushing. | Request Sample |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc.TRIMET Products Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...view more DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. view less | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Coapur™ 817 W | Arkema Rheology & Specialty Additives | Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...view more Coapur™ 817 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. view less | Request Sample |
| Rheotech™ 4000 MB | Arkema Rheology & Specialty Additives | Rheotech™ 4000 MB is the Mass Balance version of the Rheotech™ 4000 LC with a Bio-attributed content of 60%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Rheotech™ 4000 MB achieves the same performanc...view more Rheotech™ 4000 MB is the Mass Balance version of the Rheotech™ 4000 LC with a Bio-attributed content of 60%. It allows a significant reduction of the product's carbon footprint compared to its fossil version. Rheotech™ 4000 MB achieves the same performance as the Rheotech™ 4000 LC and can be readily used and implemented as a direct drop-in. view less | Request Sample |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...view more AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). view less | |
| Rheotech™ 146 | Arkema Rheology & Specialty Additives | Rheotech™ 146 is a non associative thickener designed for use in adhesives, paints, sealants & mastics. | Request Sample |
| Gelycel® | Amtex | Gelycel® is a carboxymethylcellulose product which is available in different grades based on viscosity, degree of substitution, and purity. Carboxymethylcellulose are the most commonly used and versatile hydrocolloids since they supply properties such as ...view more Gelycel® is a carboxymethylcellulose product which is available in different grades based on viscosity, degree of substitution, and purity. Carboxymethylcellulose are the most commonly used and versatile hydrocolloids since they supply properties such as thickening, emulsifying, suspension, water retention, and film formation. It also functions as a crystallization retardant, binding agent, and colloid protector. view less | |
| PAT-ADD DA 788 | Patcham USA | PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mi...view more PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mineral spirits with water. This results in reduction in VOC content, at lowest cost. Main benefits are: enabling paint cost reduction by water addition, enabling reduction in VOC level, and replacement of 20 to 35% of traditionally used white spirit in alkyd paint. view less | |
| Baymedix® FP503 | Covestro | Baymedix® FP503 is an aliphatic, hydrophilic NCO prepolymer blend based on hexamethylene diisocyanate (HDI). | |
| Humocer® 100 A 45 TM EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM EX is a water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. It is based on water beyond the masses with base acrylic resins and PVA. | |
| CN104A60 | Sartomer Americas | CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's ...view more CN104A60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Performance properties for CN104A60 include good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include are adhesives, coatings, electronics, inks and sealants. view less | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...view more AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. view less | |
| CRYSTAZENE 110 | DRT (Les Derives Resiniques et Terpeniques) | CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, a...view more CRYSTAZENE 110 is a water-white, highly stabilized, terpene-modified tackifying resin. It shows excellent adhesive performances. This product is recommended for metallocene polyethylene based hot melt-synthetic rubber adhesives, acrylic based adhesives, and for plastic film modification. view less | |
| Humocer® 100 A 45 SP | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 SP is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 SP is used as water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and ex...view more Humocer® 100 A 45 SP is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 SP is used as water repellent additive, applied as beating of water, lubricant and lifting of pattern agent in the inks and internal and external coverings. Based on water beyond the masses with base acrylic resins and PVA. view less | |
| CN104B80Z | Sartomer Americas | CN104B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238, hexanediol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer’s bisphenol A-bas...view more CN104B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238, hexanediol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer’s bisphenol A-based epoxy acrylates. view less | |
| CN120B80Z | Sartomer Americas | CN120B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238 hexane diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN120, offers the lowest viscosity of Sartomer's bisphenol A-base...view more CN120B80Z is a difunctional bisphenol A-based epoxy acrylate blended with 20% SR238 hexane diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN120, offers the lowest viscosity of Sartomer's bisphenol A-based epoxy acrylates. view less | |
| CN110 | Sartomer Americas | CN110 is a difunctional bisphenol A-based epoxy acrylate oligomer that provides a good balance of water properties and high reactivity. The performance properties for this product are abrasion resistance, adhesion, chemical resistance and water resistance...view more CN110 is a difunctional bisphenol A-based epoxy acrylate oligomer that provides a good balance of water properties and high reactivity. The performance properties for this product are abrasion resistance, adhesion, chemical resistance and water resistance. Suggested applications include adhesives, coatings, electronics, inks and sealants. view less | |
| Texicryl® AD8077 | Scott Bader | Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water ...view more Texicryl® AD8077 is a styrene acrylic copolymer emulsion made to be formulated with a variety of filler types into water-resistant tile adhesives and grouts. Ceramic tiles that are based on the product provide good trowelability, wet bond strength, water and slip resistance and white color. view less | |
| Priplast 3186 | Cargill Industrial Specialties | Priplast 3186 is a dimer fatty acid based polyester polyol building block for cross-linked PU adhesives, foams and sealants providing excellent hydrolytic stability and water repellency. | |
| ADDAPT® AS 400 | ADDAPT Chemicals BV | ADDAPT® AS 400 is an acrylic copolymer based emulsion in water. It is used as an emulsion rheology modifier in paints, adhesives, printing inks, and paper coatings. | |
| SIT8189.0 | Gelest, Incorporated | Water soluble, hydrophilic silane. | |
| XIAMETER® OFX-0190 Fluid | Univar Solutions | XIAMETER® OFX-0190 Fluid is a modified silicone, designed primarily to provide leveling, slip and mar resistance in water and solvent borne paints, inks and coatings. This additive also improves anti blocking properties, gloss and substrate wetting. | Request Sample |
| Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) | Croda Coatings & Polymers | Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative ...view more Priplast™ 3286 – Amorphous Polyester Polyol (1700 MW) is a bio-based polyester polyol used in water repellent PU flexible foams and sealants, cast PU elastomers, and 2K PU adhesives. It provides resistance to hydrolytic attack, alkali and acid, oxidative and temperature degradation for applications in polyurethane coating resins, adhesive resins, elastomers, and water repellent foams. view less | |
| VINNAPAS® 5025 L | Wacker Chemical Corporation | VINNAPAS® 5025 L is a leveling dispersible powder based on vinyl acetate and ethylene with good defoaming properties for smooth surfaces and very good tolerance against water over-dosage. | Request Sample |
| Viscoatex™ 560 | Arkema Rheology & Specialty Additives | Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type,...view more Viscoatex™ 560 is a formaldehyde-free, APEO-free, Heavy metal-free and Solvent-free non associative thickener designed for use in adhesives, paints, sealants & mastics. Viscoatex™ 560 imparts robustness versus variations of ingredients such as latex type, surfactant and co-solvent. view less | Request Sample |
| ADDAPT® Foamstop™ EM 19 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, ...view more ADDAPT® Foamstop™ EM 19 is an emulsion of surface active components and mineral oil in water. It is used as a foam control agent for emulsion systems based on PVAC, VA/VEOVA, Styrene/Acrylics, or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. view less | |
| HIKOTACK P-90S | Kolon | HIKOTACK P-90S is pale yellow thermoplastic resin n be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| HIKOTACK P-90HS | Kolon | HIKOTACK P-90HS is pale yellow thermoplastic resin which is used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| RHEOBYK-7405 | BYK | RHEOBYK-7405 is an aromatic- and tin-free rheology additive for solvent-free and solvent-borne systems to enhance the rheological properties in conjunction with organophilic phyllosilicates and hydrophilic fumed silica. | |
| OZ WHITE™ | Univar Solutions | OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based...view more OZ WHITE™ is a dry ground limestone marble with a very coarse particle size that is controlled between 6 mesh and 14 mesh. Textured coatings and water treatment are the main applications. OZ WHITE™ is suited for use in textured coatings and stuccos based on cement of acrylics, acid neutralization, and water filtration systems. view less | Request Sample |
| HIKOTACK P-90 | Kolon | HIKOTACK P-90 is pale yellow thermoplastic resin that can be used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives, water repellent agent, concrete curing agent and binder for asphalt. | |
| CN104A75 | Sartomer Americas | CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphen...view more CN104A75 is a difunctional bisphenol A-based epoxy acrylate blended with 25% SR306, tripropylene glycol diacrylate. It provides a good balance of water properties and high reactivity. The base oligomer, CN104, offers the lowest color of Sartomer's bisphenol A based epoxy acrylates. Suggested applications for this include adhesives, coatings, electronics and inks. view less | |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...view more ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. view less | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| CN120C60 | Sartomer Americas | CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based...view more CN120C60 is a difunctional bisphenol A based epoxy acrylate blended with 40% SR351, trimethylol propane triacrylate. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomer's bisphenol A based epoxy acrylates. Performance properties for this product are good adhesion, good chemical resistance, good hardness, good water resistance and high abrasion resistance. Suggested applications include adhesives, binder adhesives, pressure sensitive and structural adhesives, coatings, floor, metal, plastic and paper coatings, electronics, inks, flexo and gravure inks, offset and screen inks and sealants. view less | |
| SILLITIN N 85 | Hoffmann Mineral | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| CN120A75 | Sartomer Americas | CN120A75 is a difunctional bisphenol A based epoxy acrylate blended with SR-306. It provides a good balance of water properties and high reactivity. The base oligomer, CN-120, offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. CN1...view more CN120A75 is a difunctional bisphenol A based epoxy acrylate blended with SR-306. It provides a good balance of water properties and high reactivity. The base oligomer, CN-120, offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. CN120A75 imparts chemical resistance, film hardness and high reactivity. Suggested applications include adhesives, coatings, electronics and inks. view less | |
| Humocer® 100 A 45 TM | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 TM is a paraffin emulsion with high stability and excellent dispersion in water. Humocer® 100 A 45 TM is a hydro-relent used as an additive, lubricant and release agent in paints and exterior coatings of internal water and beyond the bas...view more Humocer® 100 A 45 TM is a paraffin emulsion with high stability and excellent dispersion in water. Humocer® 100 A 45 TM is a hydro-relent used as an additive, lubricant and release agent in paints and exterior coatings of internal water and beyond the base of the masses based on acrylic resin and PVA. Perfect for your application, shake well before use. view less | |
| Domide G-5022 | Kukdo Chemical Co., Ltd. | Domide G-5022 is a reactive polyamide resin which shows excellent adhesion, toughness, water and chemical resistance as a curing agent for epoxy coatings and adhesives. It is particularly designed for use in solvent-based surface coatings. | |
| REGALITE R-1125 | Univar Solutions | REGALITE R-1125 is a low molecular weight fully hydrogenated water-white inert thermoplastic resin derived from petrochemical feedstocks. This resin is particularly useful as tackifier for hot melt systems based on EVA copolymers and SIS block copolymers. | Request Sample |
| Humocer® 100 A 45 T EX | Isogama Industria Quimica Ltda. | Humocer® 100 A 45 T EX is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 T EX It is applied as beating of water, lifting of pattern agent and lubricant in the inks and internal and external coverings based on w...view more Humocer® 100 A 45 T EX is a great stable paraffin emulsion with excellent dispersion in watery way. Humocer® 100 A 45 T EX It is applied as beating of water, lifting of pattern agent and lubricant in the inks and internal and external coverings based on water beyond the masses with base acrylic resins and PVA. For its perfect application, to stir before use. view less | |
| CN120Z | Sartomer Americas | CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, ana...view more CN120Z is a difunctional bisphenol A based epoxy acrylate. It provides a good balance of water properties and high reactivity. CN120Z offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN104A80Z | Sartomer Americas | CN104A80Z is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-306, tripropylene glycol diacrylate. It provides good balance of water properties and high reactivity. The base oligomer, CN-104, is the lowest color of Sartomer’s bisphenol ...view more CN104A80Z is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-306, tripropylene glycol diacrylate. It provides good balance of water properties and high reactivity. The base oligomer, CN-104, is the lowest color of Sartomer’s bisphenol A based epoxy acrylates. CN104A80Z imparts chemical resistance, excellent gloss, high reactivity and low color. Suggested applications include adhesives, coatings, electronics, inks and sealants. view less | |
| HIKOTACK P-120S | Kolon | HIKOTACK P-120S is pale yellow thermoplastic resin which is primarily used as tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-120S can be also used as water repellent agent, concrete curing agent, and binder for asphalt. | |
| Priplast 3197 | Cargill Industrial Specialties | Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low pola...view more Priplast 3197 is a liquid, amorphous polyester polyol that is a 100% bio-based building block for PU adhesives and sealants. It provides extreme hydrophobicity, water repellency and flexibility in PU systems with rubbery elasticity, compatible to low polar components. view less | |
| Docure KH-506 | Kukdo Chemical Co., Ltd. | Docure KH-506 is an aliphatic amine modified mannich based hardener. KH-506 has good water spot resistance in the area of floorings. It is well suited for the production of solvent free coatings that are curable at low temperatures. | |
| Priplast™ 3294 | Cargill Industrial Specialties | Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with ...view more Priplast™ 3294 is a 100% bio-based polyol: it provides PU coatings, adhesives, PU dispersions and elastomers with excellent water resistance, superior surface hardness, and outstanding mechanical properties. It is a semi-crystalline polyester polyol with a molecular weight of 2000. view less | |
| PAT-ADD DA 786 | Patcham USA | PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent com...view more PAT-ADD DA 786 is a blend of anionic and non-ionic surface active compounds to use as emulsifier to allow the addition of water into oil based coating systems without any loss of Gloss and hardness of the final paint film. Main benefits are: excellent compatibility with all alkyd resins, strong water-alkyd hybrid resulting in longer stability, imparts high viscosity to the system thus reduces separation, no rusting or water separation on storage as well as on reduction, no reduction of gloss or hardness, and cost reduction. view less | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...view more A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. view less | |
| CN120C80 | Sartomer Americas | CN120C80 is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-351.It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested application...view more CN120C80 is a difunctional bisphenol A based epoxy acrylate blended with 20% SR-351.It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor,metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| CN120D80 | Sartomer Americas | CN120D80 difunctional bisphenol A based epoxy acrylate blended with 20% SR-9020. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications i...view more CN120D80 difunctional bisphenol A based epoxy acrylate blended with 20% SR-9020. It provides a good balance of water properties and high reactivity. CN120 offers the lowest viscosity of Sartomers bisphenol A based epoxy acrylates. Suggested applications include adhesives, anaerobic, binder, pressure sensitive and structural adhesives. It is also recommended for floor, metal, paper and plastic coatings, electronics, inks, flexo, gravure and offset inks. view less | |
| OPTIBENT® 6042 | BYK | OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly ...view more OPTIBENT® 6042 is a natural occurring rheology modifier based on phyllosilicates providing softer consistency, improved sag control and open time with no negative impact on setting time. OPTIBENT 6042 is effective in mineral based adhesives, particularly in cementitious, fast setting and mid-set adhesives. OPTIBENT® 6042 is suitable in cementitious construction application allowing a balance of other organic thickeners such as water retention aids. view less | |
| CN308 | Sartomer Americas | CN308 is an aliphatic acrylate ester-based off a hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN308 will have a low Tg, and low crosslink density, and will b...view more CN308 is an aliphatic acrylate ester-based off a hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN308 will have a low Tg, and low crosslink density, and will be flexible. view less | |
| HDK® V15A | Wacker Chemical Corporation | Synthetic, hydrophilic amorphous silica, produced via flame hydrolysis. | Request Sample |
| Organosilane NOEO | Dalian Onichem Co., Ltd. | Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon...view more Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. view less | Request Sample |
| Eastman Optifilm™ Enhancer 400 | Univar Solutions | Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman ...view more Eastman Optifilm™ enhancer 400 is a very low VOC, low odor coalescent that is compatible with a variety of latex types. It is an efficient coalescent that aids in the development of latex paints that have a good balance of performance properties. Eastman Optifilm™ enhancer 400 delivers excellent film integrity, touch-up properties, and scrub resistance, even at the lowest VOCs content. Paints prepared with Eastman Optifilm™ enhancer 400 have also demonstrated good exterior durability after one year exposure. view less | Request Sample |
| Fumapol 71-100 | Polidur San Luis | Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss w...view more Fumapol 71-100 is a rosin modified fumaric resin at 100% of solids. This product presents a high melting range, fast solvent release and excellent compatibility with alcohols. It has applications in water and alcohol based flexographics inks, auto gloss waxes and nitrocellulose lacquers. view less | |
| SIB1660.0 | Gelest, Incorporated | Hydrophilic dipodal silane that, with tin catalyst, forms moisture-crosslinkable resins. | |
| STARPOL® 136 | Univar Solutions | STARPOL® 136 is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud as well as a number of other applications. STARPO...view more STARPOL® 136 is an easily dispersible, highly substituted, nonionic water soluble polymer designed to be used at lower solids levels in wall treatments, adhesives, tile mortar, tile grout, oil drilling mud as well as a number of other applications. STARPOL® 136 is a modified waxy corn based starch polymer. Pregelatinization allows the polymer to hydrate and build high viscosity in water at low temperatures. The STARPOL® 136 polymer is modified to give enhanced water holding capacity which allows this product to serve as an excellent fluid loss control agent. In addition, STARPOL® 136 is also crosslinked to provide resistance to shear breakdown. view less | Request Sample |
| SIA0050.0 | Gelest, Incorporated | Hydrolyzes to form stable silanol solutions in neutral water. | |
| SSP-058 | Gelest, Incorporated | Water tree resistance additive for crosslinkable HDPE cable cladding. | |
| M-2070 Polyether Amine | Yangzhou Chenhua New Material CO., LTD. | M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water so...view more M-2070 Polyether Amine is a colorless to light yellow monoamine which is based on copolymer backbone. This product has an average molecular weight of about 2000 and a PO/EO ratio of 10/31. M-2070 Polyether Amine provides surfactant properties and water solubility to adhesives. view less | |
| CN9070 | Sartomer Americas | CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg...view more CN9070 is a hydrophobic aliphatic urethane acrylate oligomer based off of an aliphatic hydrophobic backbone. The oligomer possesses good resistance to water, both liquid and vapor, and to various chemicals. Upon crosslinking, the CN9070 will have a low Tg, low crosslink density, and will be flexible. view less | |
| Exolit® OP 935 | Clariant Plastics & Coatings Ltd. | Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in ...view more Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in solvents like acetone or MEK. view less | |
| NEVPENE® 9545 | Neville Chemical Company | NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesive...view more NEVPENE® 9545 resin is a unique low molecular weight petroleum hydrocarbon resin. This amber liquid is compatible with most elastomers, has thermal stability and enhances water resistance. It can be applied to adhesives and sealants, construction adhesives, high solids solvent borne coatings and in asphalt modification. view less | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers...view more N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. view less |
