| Pigment Yellow 138 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Pigment Yellow 138 is a greenish yellow pigment with good resistance to light, weather, heat, and solvent. This product has a density of 1.845 g/cm3 and a pH value of 6.5-7.5. It is commonly used in industrial coatings and automobile coatings. | |
| Pigment Yellow RLT | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Pigment Yellow RLT is a high strength reddish yellow pigment with good resistance to light, weather, heat, and migration. This product has a density of 1.82 g/cm3 and a pH value of 6.5-7.5. It is commonly used in metal decorative paints, inks, automobile ...view more Pigment Yellow RLT is a high strength reddish yellow pigment with good resistance to light, weather, heat, and migration. This product has a density of 1.82 g/cm3 and a pH value of 6.5-7.5. It is commonly used in metal decorative paints, inks, automobile paints, and latex paints. view less | |
| Bayhydrol® UH 2558 | Covestro | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH ...view more Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. view less | |
| Bayhydrol® UH 2593/1 | Covestro | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH ...view more Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. view less |
