UL Prospector

Success!

Successfully saved your search
AROPLAZ® 6126-Z-65 Polynt Composites AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be u...view more AROPLAZ® 6126-Z-65 is a linear saturated polyester resin. This product offers flexibility with a minimal post-cure, good QUV gloss retention and Xenon weatherometer gloss retention, and it retains its color and gloss on high-temperature bakes. It can be used in melamine-crosslinked baking enamels for coil coating applications that need high flexibility. view less
ASKOFEN R 9600 ASK Chemicals ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be...view more ASKOFEN R 9600 is a butylated phenol resol with good compatibility to different resin systems, e.g. epoxy or polyester resins. The phenol resin has a low formaldehyde content of less than 0.5%, coatings with a formaldehyde content of less than 0.1% can be formulated. Coatings based on ASKOFEN R 9600 provide good adhesion, hardness and flexibility as well as excellent sterilization resistance and chemical resistance with exception of strong alkalines. This product is recommended as a crosslinker for epoxy and polyester resins for packaging coatings, and is also suitable for can and coil coatings. view less
Arobras™ 6120 ASK Chemicals Arobras™ 6120 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 9080 ASK Chemicals Arobras™ 9080 is a pure alkyd drying resin, average high solid soy oil. Shows good compatibility with other resins such as phenolated, short, medium, acrylated and regular, and compatibility with mineral oils.
BEPD Perstorp BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coating...view more BEPD is a polyalcohol in the form of a white crystalline solid. It is a diol containing primary hydroxyl groups and has a BEPD content of at least 99 percent. BEPD can be used in saturated polyesters for can and coil coatings and polyurethanes for coatings. view less
BEPD 70L Perstorp BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder c...view more BEPD 70L has two primary hydroxyl groups and is a mixture of 70% BEPD, 25% NEO, and 5% water. It is a clear and colorless liquid at room temperature. BEPD 70L can be used in saturated polyesters for can and coil coatings, high-solid coatings, and powder coatings. view less
CHS-Epoxy 030 Spolchemie CHS-Epoxy 030 is a high molecular weighted solid epoxy resin. This is a type 9 solid epoxy resin with epoxide equivalent weight (EEW) range between 2220-4000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 050 Spolchemie CHS-Epoxy 050 is a high molecular weighted solid epoxy resin. This is a type 7 solid epoxy resin with epoxide equivalent weight (EEW) range between 1550-2000 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings.
CHS-Epoxy 070 Spolchemie CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can ...view more CHS-Epoxy 070 is a clear colored high molecular weighted unmodified solid epoxy resin. This is a type 6 solid epoxy resin with epoxide equivalent weight (EEW) range between 1350-1640 g/mol. This product is primarily used for producing epoxy-phenolic, can and coil coatings. view less
Request Sample CYMEL® 5010B Resin Allnex - Liquid Coating Resins & Additives + Crosslinkers CYMEL® 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without...view more CYMEL® 5010B resin is a partially n-butylated benzoguanamine resin supplied in n-butanol and designed for solvent-based coatings. Like other benzoguanamine resins, this product imparts excellent adhesion and chemical resistance to the coating, but without the need for an external catalyst in the formulation. view less
Request Sample CYMEL® NF 2000 Crosslinking Agent Allnex - Liquid Coating Resins & Additives + Crosslinkers CYMEL® NF 2000 crosslinking agent is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resis...view more CYMEL® NF 2000 crosslinking agent is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. CYMEL® NF 2000 can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. This product is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less
Request Sample CYMEL® NF 2000A Resin Allnex - Liquid Coating Resins & Additives + Crosslinkers CYMEL® NF 2000A is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that ex...view more CYMEL® NF 2000A is a unique trifunctional melamine-based crosslinker containing reactive carbamate functionality supplied in n-butanol. It can be used to crosslink hydroxy- and epoxy-containing polymers to give highly durable, acid-resistant films that exhibit a favorable balance of hardness and flexibility. An important feature of CYMEL® NF 2000A is that it does not contain or emit formaldehyde on cure. It can be employed as the sole crosslinker in a coating or ink formulation, or it may be used at lower levels in combination with other crosslinkers, such as amino resins or isocyanates, in order to obtain a balance of properties. CYMEL® NF 2000A is recommended for high quality durable finishes such as automotive topcoats, exterior can varnishes, and coil coatings. view less
Coronate® 2507 Tosoh Corporation Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2507, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Coronate® 2513 Tosoh Corporation Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® 2513, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Coronate® AP-M Tosoh Corporation Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, ...view more Coronate® AP-M, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Coronate® BI-301 Tosoh Corporation Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals...view more Coronate® BI-301, in the form of a pale yellow to brownish flakes, is an isocyanate that is masked with blocking agents (E-caprolactam and phenol). This blocked isocyanate can be applied as baking finishes for coil coatings, wire, rubber, plastics, metals, and more. view less
Request Sample DYNAPOL® L 205 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used fo...view more DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings as a primer for hot dip galvanized steel, and may also be used for aluminium primers and appliance finishing. In can coatings, it may be used for metal decorating enamels and interior can coatings. view less
Request Sample DYNAPOL® L 206 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance fi...view more DYNAPOL® L 205 is a saturated, high molecular, linear co-polyester. It is recommended for use in can coatings for foil primers and printing inks, and may also be use in heat sealing lacquers. In coil coatings, this product may be suitable for appliance finishing. view less
Request Sample DYNAPOL® L 208 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating appli...view more DYNAPOL® L 208 is a saturated, high molecular, branched co-polyester. It is recommended for use in coil coating applications such as primers for hot dip galvanized steel and hot laminating adhesives. This product may also be suitable for can coating applications like foil primers and printing inks. view less
Request Sample DYNAPOL® L 210 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacqu...view more DYNAPOL® L 210 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings for hot laminating adhesives. In can coatings, it is recommended for foil primers and printing inks, and may also be used for heat sealing lacquers. view less
Request Sample DYNAPOL® L 411 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings ...view more DYNAPOL® L 411 is a saturated, high molecular, linear co-polyester. It is recommended for use in coil coatings in primers for hot dip galvanized steel, primers for aluminium, hot laminating adhesives, and elastification resins, as well as in can coatings such as metal decorating enamels, interior can coatings, foil primers and printing inks, and heat sealing lacquers. This product may also be used for appliance finishing and adhesion promoters. view less
Request Sample DYNAPOL® L 952 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can ...view more DYNAPOL® L 952 is a saturated, high molecular, linear co-polyester. In coil coatings, it is recommended for appliance finishing applications, and may also be used for primers for hot dip galvanized steel. This product is also recommended for interior can coatings and may be suitable for metal decorating enamels. view less
Request Sample DYNAPOL® LH 538-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 538-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior architecture, appliance finishing, and traffic applications.
Request Sample DYNAPOL® LH 724-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and t...view more DYNAPOL® LH 724-24 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture. This product may also be suitable for appliance finishing and traffic uses. view less
Request Sample DYNAPOL® LH 727-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 727-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for back coatings.
Request Sample DYNAPOL® LH 744-23 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 744-23 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially for exterior architecture.
Request Sample DYNAPOL® LH 815-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable ...view more DYNAPOL® LH 815-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, interior can coatings, and tube and aerosol can coatings. This product may also be suitable for coil coating applications such as primers for hot dip galvanized steel and primers for aluminium. view less
Request Sample DYNAPOL® LH 818-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior arch...view more DYNAPOL® LH 818-05 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels. This product is also recommended for many coil coating applications, including interior architecture, appliance finishing, and aluminium primers. It may also be suitable for primers for hot dip galvanized steel. view less
Request Sample DYNAPOL® LH 820-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 820-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 822-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing app...view more DYNAPOL® LH 822-01 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior architecture and for traffic uses. This product may also be suitable for appliance finishing applications. view less
Request Sample DYNAPOL® LH 824-16 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 824-16 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as primers for hot dip galvanized steel. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 826-05/A Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other co...view more DYNAPOL® LH 826-05/A is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coatings such as metal decorating enamels, and coil coatings such as interior architecture. This product may be suitable for other coil coating applications, such as appliance finishing, primers for hot dip galvanized steel, and primers for aluminium. view less
Request Sample DYNAPOL® LH 828-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses...view more DYNAPOL® LH 828-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture and back coatings. This product may also be suitable for exterior architecture and traffic uses. view less
Request Sample DYNAPOL® LH 830-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for co...view more DYNAPOL® LH 830-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for can coating applications, especially metal decorating enamels and tube- and aerosol can coatings. This product is also recommended for coil coating applications such as exterior and interior architecture, appliance finishing, and traffic uses. view less
Request Sample DYNAPOL® LH 831-24 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may...view more DYNAPOL® LH 831-24 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture, and also for traffic uses and primers for aluminium. This product may also be suitable for can coating applications such as metal decorating enamels. view less
Request Sample DYNAPOL® LH 832-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 832-02 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially exterior and interior architecture, appliance finishing, and traffic uses.
Request Sample DYNAPOL® LH 833-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for applian...view more DYNAPOL® LH 833-03 is a saturated, medium molecular, branched, hydroxylated co-polyester resin. It is recommended for coil coating applications, especially primers for hot dip galvanized steel and primers for aluminium. It may also be suitable for appliance finishing and for metal decorating enamels. view less
Request Sample DYNAPOL® LH 834-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 834-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for appliance finishing applications.
Request Sample DYNAPOL® LH 838-02 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applicatio...view more DYNAPOL® LH 838-02 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses and for can coating applications like metal decorating enamels. view less
Request Sample DYNAPOL® LH 874-26 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 874-26 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior architecture. This product may also be suitable for appliance finishing and for back coatings.
Request Sample DYNAPOL® LH 898-14 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LH 898-14 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for coil coatings such as interior and exterior architecture. This product may also be suitable for traffic uses.
Request Sample DYNAPOL® LS 4131-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applicati...view more DYNAPOL® LS 4131-10 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coatings for traffic uses and for can coatings such as foil primers and printing inks. Other can coating applications for this product may include adhesion promoters and heat sealing lacquers. view less
Request Sample DYNAPOL® LS 415-10 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil c...view more DYNAPOL® LS 415-10 is a saturated, medium molecular, linear, highly elastified, co-polyester resin. It is recommended for can coating applications such as interior can coatings, foil primers, and printing inks. This product may also be suitable for coil coating applications like interior architecture and appliance finishing. view less
Request Sample DYNAPOL® LS 436-12 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings...view more DYNAPOL® LS 436-12 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for coil coating applications such as interior and exterior architecture. This product may also be suitable for can coatings, including heat sealing lacquers. view less
Request Sample DYNAPOL® Terra 125 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil...view more DYNAPOL® Terra 125 is a saturated, medium molecular, linear, highly elastified, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for appliance finishing applications. view less
Request Sample DYNAPOL® Terra 127-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as e...view more DYNAPOL® Terra 125 is a saturated, medium molecular, linear, hydroxylated co-polyester resin. It is recommended for can coating applications such as lacquers for aluminium foils and interior can coatings. It is also recommended for coil coatings such as exterior and interior architecture, and may also be suitable for primers for hot dip galvanized steel and primers for aluminium. view less
Request Sample DYNAPOL® UB 1052-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1052-03 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture and for traffic uses.
Request Sample DYNAPOL® UB 1173-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1173-03 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture and for traffic uses.
Request Sample DYNAPOL® UB 1174-27 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1174-27 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture. This product may also be suitable for traffic uses and for industrial coatings.
Request Sample DYNAPOL® UB 1256-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 1256-06 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture and for traffic uses, and may also be suitable for appliance finishing.
Request Sample DYNAPOL® UB 41-05 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing...view more DYNAPOL® UB 41-05 is a blocked one pack polyester-polyurethane system. It is recommended for can coating applications such as metal decorating enamels. This product may also be suitable for coil coatings, such as interior architecture, appliance finishing, and primers for aluminium. view less
Request Sample DYNAPOL® UB 790-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 790-03 is a blocked one pack polyester-polyurethane system. It is recommended for several coil coating applications, such as exterior and interior architecture, primers for hot dip galvanized steel, primers for aluminium, and traffic uses. It ...view more DYNAPOL® UB 790-03 is a blocked one pack polyester-polyurethane system. It is recommended for several coil coating applications, such as exterior and interior architecture, primers for hot dip galvanized steel, primers for aluminium, and traffic uses. It may also be suitable for appliance finishing and industrial coatings. view less
Request Sample DYNAPOL® UB 791-03 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 791-03 is a blocked one pack polyester-polyurethane system. It is recommended for several coil coating applications, such as exterior and interior architecture, primers for hot dip galvanized steel, and primers for aluminium. It may also be su...view more DYNAPOL® UB 791-03 is a blocked one pack polyester-polyurethane system. It is recommended for several coil coating applications, such as exterior and interior architecture, primers for hot dip galvanized steel, and primers for aluminium. It may also be suitable for appliance finishing and traffic uses. view less
Request Sample DYNAPOL® UB 877-01 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 877-01 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as appliance finishing and primers for hot dip galvanized steel. This product may also be suitable for metal decorating enamels.
Request Sample DYNAPOL® UB 909-06 Evonik Resource Efficiency GmbH, BL Coating & Adhesive Resins DYNAPOL® UB 909-06 is a blocked one pack polyester-polyurethane system. It is recommended for coil coating applications such as exterior architecture and industrial coatings. This product may also be suitable for traffic uses.
Epotec® YD 010 S Aditya Birla Epotec® YD 010 S is a high molecular weight, unmodified, standard solid epoxy resin which displays excellent flexibility and good adhesion. This product is ideal for use in can coatings, tube & drum linings, and high performance primers.
Epotec® YD 017 Aditya Birla Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters f...view more Epotec® YD 017 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less
Epotec® YD 017S Aditya Birla Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufactu...view more Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less
Epotec® YD 019 Aditya Birla Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resist...view more Epotec® YD 019 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YD 019S Aditya Birla Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and ...view more Epotec® YD 019S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits optimum flexibility and food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YD 126 Aditya Birla Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is id...view more Epotec® YD 126 is an unmodified, low viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. Lower viscosity allows for the production of solvent-free and high solids coatings without or with minimal use of diluents. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. view less
Epotec® YD 127 Aditya Birla Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is i...view more Epotec® YD 127 is an unmodified, medium viscosity liquid epoxy resin produced from bisphenol-A and epichlorohydrin. When cured with an appropriate hardener, it delivers excellent mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automotive coatings, can & coil coatings, and marine & industrial protective coatings. view less
Epotec® YD 128 Aditya Birla Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use i...view more Epotec® YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. When cured with a hardener, it provides good mechanical, chemical, electrical, and adhesion properties. This product is ideal for use in solvent-based, high solids, and solvent-free coatings, adhesives, automobile coatings, can & coil coatings, and marine & industrial protective coatings. view less
Epotec® YD 128 ED Aditya Birla Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-dep...view more Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primers and coatings, this product is also well-suited for use in various solvent-based & solvent-free coatings, can & coil coatings, and marine & industrial coatings. view less
Epotec® YD 907 Aditya Birla Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coat...view more Epotec® YD 907 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. This product is ideal for use in can coatings, coil coatings, and linings for tubes and drums. view less
Epotec® YD 909 Aditya Birla Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical r...view more Epotec® YD 909 is a high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It exhibits good flexibility and optimum food chemical resistance. This product is ideal for use in can coatings, coil coatings, linings for tubes and drums, and high performance primers. view less
Epotec® YDFM 250 Aditya Birla Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins...view more Epotec® YDFM 250 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins. This blend ensures that the crystallization resistance of this material is better than individual BPA- or BPF-based liquid epoxy resins. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. view less
Epotec® YDFM 261LV Aditya Birla Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhe...view more Epotec® YDFM 261LV is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. view less
Epotec® YDFM 262 Aditya Birla Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...view more Epotec® YDFM 262 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. view less
Epotec® YDFM 269 Aditya Birla Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesi...view more Epotec® YDFM 269 is a blend of diglycidyl ether of bisphenol-A and diglycidyl ether of bisphenol-F liquid epoxy resins, featuring high crystallization resistance. This product is ideal for use in solvent-based, high solids, & solvent-free coatings, adhesives, automotive coatings, coil coatings, and marine & industrial protective coatings. view less
Epotec® YDPN 631 Aditya Birla Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings.
Epotec® YDPN 638 Aditya Birla Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings...view more Epotec® YDPN 638 is a semi-solid phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, tank linings, chemical resistant coatings, adhesives, and coil coatings. view less
Epotec® YDPN 638 MEK 80 Aditya Birla Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance....view more Epotec® YDPN 638 MEK 80 is a solution of semi-solid phenol novolac-based multifunctional epoxy resin in methyl ethyl ketene. It is used to improve the performance of cured epoxy resin systems at elevated temperatures or requiring high chemical resistance. This product is ideal for use in can, coil, marine, and protective coatings. view less
Epotec® YDPN 638LV Aditya Birla Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & p...view more Epotec® YDPN 638LV is a low viscosity, semi-solid, phenol novolac-based multifunctional epoxy resin which can be blended with conventional epoxy resins to improve chemical and thermal resistance characteristics. This product is ideal for use in marine & protective coatings, chemical resistant coatings, tank linings, adhesives, and coil coatings. view less
Epotec® YDPN 661 Aditya Birla Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings.
HS9701 Tianyi Chemical Engineering Material Co., Ltd. HS9701, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in coil coatings, inks, and vacuum plating primers. This product wets pigments well and is resistant to boiling water.
Methyl Propanediol Perstorp Methyl Propanediol is a clear colorless liquid that is used in saturated and unsaturated polyesters for powder coatings, coil coatings and other stoving enamels.
Neopentyl Glycol 90 Perstorp Neopentyl Glycol 90 is a colorless, aqueous solution. This product is used in saturated polyesters for powder coatings, coil coatings and other stoving enamels, and unsaturated polyesters for gel coats.
Nichigo-Polyester LP011 Nippon Gohsei Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...view more Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. view less
Permanent Yellow HR Hangzhou Tiankai (China) Enterprise Co., Ltd. Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solven...view more Permanent Yellow HR is a semi-transparent yellow pigment with good resistance to both light and solvents. This product has a density of 1.7 g/cm3 and a pH value of 6.0-7.0. It is commonly used in industrial paints, decorative paints, coil coatings, solvent-based inks, and water-based inks. view less
Polurene LP 1810 S.A.P.I.C.I. SpA Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and...view more Polurene LP 1810 is a TDI-based polyurethane prepolymer containing blocked isocyanic groups. This product is used in combination for aliphatic diamines for solvent-free coatings. It can be formulated in 1K stoving enamel applications for automotives and coil coatings. view less
Resiflow® L-210 Estron Chemical, Inc. Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and c...view more Resiflow® L-210 is a low viscosity, non-reactive acrylic polymer used as a leveling agent in high solids, UV curing, coil, and other coating systems. Resiflow® L-210 can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® L-210 has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
Resiflow® L-3075 Estron Chemical, Inc. Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellen...view more Resiflow® L-3075 is a specialty acrylic polymer additive provided at 75% solids in Solvent 100 (Hi-Sol 10) for use in coil coating systems. The recommended level of usage is between 0.2-2.0% based on coating resin weight. Resiflow® L-3075 affords excellent air release, improved film characteristics, and resistance to dirt-pick up. view less
Resiflow® L-37 Estron Chemical, Inc. Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and...view more Resiflow® L-37 is a silicone-free, 100% solids, reactive polyacrylate additive for high solids, solvent-based, free radical UV, cationic, coil, and general industrial coatings, inks and adhesives. Resiflow® L-37 has been tested in various formulations and is especially effective in urethane acrylates, epoxy acrylates, polyesters, and epoxies. Recommended level of usage is 0.1%-0.5% based on solids. Resiflow® L-37 can be cut in various reactive diluents, aromatic and aliphatic hydrocarbons, esters, ketones, or alcohols for easy incorporation into the formula. view less
Resiflow® L-45D Estron Chemical, Inc. Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and or...view more Resiflow® L-45D is an acrylic polymer solution used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it can eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel. Resiflow® L-45D can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
Resiflow® L5 Estron Chemical, Inc. Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel,...view more Resiflow® L-5 is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. When incorporated at effective concentrations, it will eliminate air entrapment, correct surface imperfections such as pinholes, craters, and orange peel, and can improve the flexibility of coatings. Resiflow®L-5 can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
Resiflow® LF Estron Chemical, Inc. Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow...view more Resiflow® LF is an acrylic polymer used in high solids, UV curing, coil, and other coating systems. It is used to eliminate pinholes, craters, air entrapment, to improve flow and leveling (orange peel), and to improve the flexibility of coatings. Resiflow® LF can be used in acrylics, alkyds, phenolics, epoxies, polyesters, polyurethanes, nitrocellulose lacquers, and other systems. view less
Resiflow® LH-241 Estron Chemical, Inc. Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety o...view more Resiflow® LH-241 is a specialty acrylic flow control additive that is in the reactive family of Resiflow® products. Typical dosage of Resiflow LH-241 is from 0.2 - 2%. Resiflow® LH-241 is a viscous liquid additive that can be incorporated into a variety of binder chemistries to promote smoothness and gloss. Resiflow® LH-241 is well suited for coil coatings and clearcoats. view less
Resiflow® LV Estron Chemical, Inc. Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as...view more Resiflow® LV is a low viscosity acrylic polymer used in high solids, UV curing, coil, and other coating systems. It used for improving flow and leveling (orange peel). Resiflow® LV can also facilitate air release and minimize surface imperfections such as pinholes and craters. Resiflow® LV has compatibility with all coating systems including acrylic, alkyd, phenolic, epoxy, polyester, polyurethane, nitrocellulose lacquer, and other systems. view less
Resiflow® LV-67 Estron Chemical, Inc. Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1....view more Resiflow® LV-67 is an industry recognized standard acrylic polymer flow and leveling additive. It is used in general industrial and coil coating systems to improve air release and reduce solvent popping. Typical dosage of Resiflow® LV-67 is between 0.2-1.5%, and as with any raw material, laboratory evaluation is recommended to determine the best processing method and the optimum concentration of the additive. view less
Resiflow® S Estron Chemical, Inc. Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder...view more Resiflow® S is an acrylic polymer cut 50% in Solvent 100 (Hi-Sol 10) used primarily as a flow and leveling agent. Resiflow® S should not negatively affect intercoat or recoat adhesion. The recommended level of usage is between 0.4 – 3% based on the binder content. Resiflow® S is suitable for solvent borne coatings including primers and coil coatings. view less
SCD 1066 Etna Tec Limited, LLC SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and prim...view more SCD 1066 is a saturated, oil-free polyester resin intended for use in coil coating applications. This product has excellent flexibility and flow features, as well as excellent elongation for drawing. It is primarily used for coil coating topcoats and primers, but can also be used for adhesives, appliance coatings, and container coatings. view less
Request Sample TEGO® AddBond LP 1600 Evonik Resource Efficiency GmbH, BL Coating Additives TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatin...view more TEGO® AddBond LP 1600 is a solvent-free adhesion resin. It improves intercoat adhesion, increases the solids content, improves gloss, and offers wide solubility and compatibility. This product is recommended for can and coil coatings and industrial coatings. view less
Request Sample TEGO® AddBond LP 1611 Evonik Resource Efficiency GmbH, BL Coating Additives TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It...view more TEGO® AddBond LP 1611 is a solvent-free adhesion resin. It improves the intercoat adhesion, corrosion protection, and gloss. This product offers excellent adhesion improvement on aluminium, steel and galvanized steel, as well as plastics, PVC, and ABS. It is recommended for can and coil coatings, industrial coatings, and 2-pack coatings. view less
Request Sample TEGO® AddBond LTW Evonik Resource Efficiency GmbH, BL Coating Additives TEGO® AddBond LTW is an adhesion resin solution of a modified special polyester in xylene for solventborne formulations. It is used for can and coil coatings, industrial coatings, silk screen inks, and architectural coatings. TEGO® AddBond LTW has excelle...view more TEGO® AddBond LTW is an adhesion resin solution of a modified special polyester in xylene for solventborne formulations. It is used for can and coil coatings, industrial coatings, silk screen inks, and architectural coatings. TEGO® AddBond LTW has excellent adhesion improvement on aluminum and steel as well as on plastics such PVC and ABS. It also improves the gloss, the flexibility, the intercoat adhesion, and the corrosion protection. view less
Ultrafine™ 1000 A Lawter Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...view more Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. view less
Ultrafine™ 1WLS A Lawter Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve perfor...view more Ultrafine™ 1WLS A is a micronized ultrafine polytetrafluoroethylene powder made for abrasion, heat resistance and lubricity and is used to improve surface properties of coatings and printing inks. It can be used together with other waxes to improve performance. Ultrafine™ 1WLS A is used in UV, metal deco and overprint varnishes, in heatset and sheet-fed inks and in can, coil and wood powder coatings. view less