UL Prospector

Success!

Successfully saved your search
1,6-Hexanediol Perstorp 1,6-Hexanediol is a white, waxy, solid, linear difunctional alcohol. This product is used as a radiation curing monomer in adhesives, additives, and industrial coating applications.
4646-X-50 Epoxy Ester Gabriel Performance Products 4646-X-50 Epoxy Ester is a versatile epoxy ester resin which gives fast air drying enamels and primers excellent adhesion. 4646-X-50 can be cross linked with melamines for chemical and corrosion resistant finishes.
4724-XT-80 High Solids VT Alkyd Copolymer Resin Gabriel Performance Products 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs.
4845-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
4870-M-70 Alkyd Resin Gabriel Performance Products 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...view more 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. view less
4929-X-50 Silicone Modified Short Oil Alkyd Gabriel Performance Products 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes.
4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd Gabriel Performance Products 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry.
4962-M-75 Rosin Modified Epoxy Ester Resin Gabriel Performance Products 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less
5017-M-60 Chlorendic Modified Alkyd Resin Gabriel Performance Products 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time.
5060-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
5063-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...view more 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. view less
5075-BS-85 Water Reducible Saturated Polyester Resin Gabriel Performance Products 5075-BS-85 Water Reducible Saturated Polyester Resin is a fast curing water reducible polyester resin intended for industrial and OEM finishes.
AB-70F Quaker Color (a Division of McAdoo & Allen, Inc.) AB-70F is NMP free aliphatic urethane dispersion with good gloss, flow, water resistance, adhesion, tough, flexible, and is applicable in mold coatings. It is applicable for numerous different coatings such as, plastic, industrial, and more.
AB-72FD Quaker Color (a Division of McAdoo & Allen, Inc.) AB-72FD is NMP free aliphatic urethane dispersion with good chemical resistance, high clarity, solvent resistance, and good scratch and mar resistance. It is applicable for numerous different coatings such as, plastic, metal, wood, industrial, and more.
AB-91F Quaker Color (a Division of McAdoo & Allen, Inc.) AB-91F is NMP free aliphatic urethane dispersion that has medium hardness, good hydrolytic stability, tough, good adhesion, and more. It is applicable for numerous different coatings such as, plastic, metal, industrial, and more.
Request Sample ACMO Rahn USA Corp. ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the a...view more ACMO is an acryloyl morpholine. It is a resin for radically curable inks, coatings and adhesives. The product can be described as having low odor, good abrasion and solvent resistance, water soluble and good adhesion properties. The product improves the adhesion onto various substrates such as PVC, polyolefines, polyester and polystyrene. ACMO can be applied to the following applications: screen inks and varnishes; plastic coatings; laminating adhesives; printed circuit boards; and industrial coatings. view less
AMBERLAC® 13-031 Polynt Composites AMBERLAC® 13-031 is a styrene-modified alkyd resin that can be used in primers, hammertone finishes, and general air-dry or baking industrial enamel applications. This product features good color retention, hardness, and adhesion, and dries quickly.
AMBERLAC® 13-038 Polynt Composites AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P naphtha that can be used in aerosol finishes, toy enamels, coatings for plastics, and industrial primers and topcoats. This product provides good gloss and color with a tolerance for alip...view more AMBERLAC® 13-038 is a vinyl toluene-modified alkyd supplied in VM&P naphtha that can be used in aerosol finishes, toy enamels, coatings for plastics, and industrial primers and topcoats. This product provides good gloss and color with a tolerance for aliphatic solvents. It has a low viscosity for one-coat finishes. view less
AMBERLAC® 3755-X-80 Polynt Composites AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product has...view more AMBERLAC® 3755-X-80 is a high-solids, vinyl toluene copolymer soya alkyd resin that can be used in high-solids metal finishes, drum enamels, aerosol coatings, sanding sealers, coatings for toys, and other fast air-dry industrial finishes. This product has high gloss, good color retention and dries rapidly. The end product will have a hard film. view less
Request Sample ANCAMIDE 221-X70® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...view more ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less
Request Sample ANCAMIDE 221® Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...view more ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less
Request Sample ANCAMIDE® 220-IPA-73 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete.
AROFLINT® 252-Z1-60 Polynt Composites AROFLINT® 252-Z1-60 is a high acid-value polyester resin. This product is designed to be used in combination with an oxirane-modified ester in order to yield high-performance coatings in tools and implements, marine or industrial maintenance finishes, por...view more AROFLINT® 252-Z1-60 is a high acid-value polyester resin. This product is designed to be used in combination with an oxirane-modified ester in order to yield high-performance coatings in tools and implements, marine or industrial maintenance finishes, porcelain and bathtub refinishes, or transportation and aerospace applications, among other uses. It features high gloss and depth of image for a "wet" look, with a wide formulating latitude in a tough, abrasion-resistant film. view less
AROFLINT® D808-XD-71 Polynt Composites AROFLINT® D808-XD-71 is a high acid-value polyester resin in an aromatic solvent blend. This product is used in combination with an oxirane-modified ester in order to yield high performance coatings in tools and implements, marine or industrial maintenanc...view more AROFLINT® D808-XD-71 is a high acid-value polyester resin in an aromatic solvent blend. This product is used in combination with an oxirane-modified ester in order to yield high performance coatings in tools and implements, marine or industrial maintenance finishes, porcelain or bathtub refinishes, and transportation or aerospace applications, among other uses. This product features high gloss and depth of image for a "wet look," with a wide formulating latitude in a tough, abrasion-resistant film. view less
AROLON® 559-G4-70 Polynt Composites AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain re...view more AROLON® 559-G4-70 is a non-oxidizing, water-dispersible acrylic resin that can be used in exterior durable baking enamels, non-yellowing clear coatings, and industrial topcoats. This product reduces faster with solids and offers good chemical and stain resistance, and wets pigments very well. The end product will develop a high gloss. view less
AROLON® 5900 Polynt Composites AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT to...view more AROLON® 5900, in the form of a translucent to milky white liquid, is an acrylic polyol emulsion polymer that should be reacted with polyisocyanate. It can be used in industrial maintenance topcoats, light industrial topcoats, rail car topcoats, and DOT topcoats. This product has high gloss, good chemical, water, and humidity resistance, with UV stability and UV inhibitors. view less
AROLON® 6436 Polynt Composites AROLON® 6436 is an acrylic polyol resin designed for use in high solids, high-performance polyurethane coatings, such as industrial maintenance topcoats, light industrial topcoats, OEM coatings, railcar topcoats, or off-road equipment. This product featur...view more AROLON® 6436 is an acrylic polyol resin designed for use in high solids, high-performance polyurethane coatings, such as industrial maintenance topcoats, light industrial topcoats, OEM coatings, railcar topcoats, or off-road equipment. This product features high gloss, good chemical resistance, with weatherability properties in an economical coating formulation. view less
AROLON® 6473 Polynt Composites AROLON® 6473, in the form of a clear liquid, is an acrylic polyol resin designed for used in high-performance, two-component polyurethane coatings. This product can be used in aerospace coatings, industrial maintenance coatings, high performance clear coa...view more AROLON® 6473, in the form of a clear liquid, is an acrylic polyol resin designed for used in high-performance, two-component polyurethane coatings. This product can be used in aerospace coatings, industrial maintenance coatings, high performance clear coats and pigmented topcoats, and automotive refinishes, among other uses. This product features chemical, scratch, and impact resistance, dries quickly, and is UV-durable. view less
Request Sample ASCONIUM® 110 GSI Exim America, Inc. ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be...view more ASCONIUM® 110 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 110 is ideal for use as a corrosion inhibitor or hydrophobic agent and can be used in any type of liquid metal coating for industrial or do-it-yourself use. For in-can corrosion protection, it can also be used in waterborne or solventborne systems, like strippers, glues, degreasers etc. view less
Request Sample ASCONIUM® 111 GSI Exim America, Inc. ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 111 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 111 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 112 GSI Exim America, Inc. ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 112 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 112 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 114 GSI Exim America, Inc. ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 114 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 114 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 140 GSI Exim America, Inc. ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 140 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 140 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 141 GSI Exim America, Inc. ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 141 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 141 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 142DA GSI Exim America, Inc. ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, profe...view more ASCONIUM® 142DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 142DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 143 GSI Exim America, Inc. ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professio...view more ASCONIUM® 143 is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 143 can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Request Sample ASCONIUM® 144DA GSI Exim America, Inc. ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, profe...view more ASCONIUM® 144DA is an organic corrosion inhibitor. It replaces mineral anticorrosion pigments or improves their performance in waterborne or solventborne metal coatings. ASCONIUM® 144DA can be used in any type of liquid metal coating for industrial, professional or do-it-yourself use, especially primers or direct-to-metal systems. view less
Abimal 125 Spolchemie Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...view more Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. view less
Accoat 1G Accoat A/S Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...view more Accoat 1G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accoat 2G Accoat A/S Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating proc...view more Accoat 2G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accofal 1G54 Accoat A/S Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...view more Accoat 1G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 20 to 60µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accofal 2G54 Accoat A/S Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pr...view more Accoat 2G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 30 to 80µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accofal 3G Accoat A/S Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating pro...view more Accoat 3G is a green colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accofal 3G54 Accoat A/S Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating p...view more Accoat 3G54 is a black colored coating that has a semi-glossy, smooth surface. Its layer thickness can range from 50 to 100µm. The product to be coated should be sand-blasted to ensure all impurities have been removed. This allows the electronic coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is safe to use in the foodstuffs industry and is well suited for coatings to protect from mild corrosion, textiles, paper and graphical industry rollers. view less
Accolan G Accoat A/S Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion...view more Accolan G is a tough, green, heat-resistant fluoroplastic coating with a semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in the glue, varnish and paint industries as a coating for a mixing vats, regular vats and other processing equipment. view less
Accolan LB Accoat A/S Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and...view more Accolan LB is a tough, grey/brown, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. view less
Accolan S Accoat A/S Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust...view more Accolan S is a tough, green and black, heat-resistant fluoroplastic coating with a smooth and semi-glossy finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is used for many purposes such as on pumps, switchgears, bearings, guides for paper and film, sawblades and other garden tools. view less
Accolan Silver Accoat A/S Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and ...view more Accolan Silver is a durable, silver-metallic, heat-resistant fluoroplastic coating with a half-matte finish. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. It offers good protection against rust and an optimal low friction to wear ratio. This product is safe to use in the foodstuffs industry, particularly in mixers, on conveyer belts and in dough vats. It is also an excellent coating for cutting tools, knives and freeze-drying trays. view less
Accoshield Accoat A/S Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have bee...view more Accoshield is a black, thermoplastic fluoropolymer coating with a smooth and half-matte finish. It is mainly used for its anti-corrosive and non-stick properties. The product to be coated should be rinsed and sand-blasted to ensure all impurities have been removed. This allows the coating process to achieve optimal adhesion, increasing the product's lifespan while applying a complete uniform coating thickness. This product is used in industries where corrosion protection at high temperatures are required. view less
Accotron Accoat A/S Accotron is a dark grey or green colored fluoropolymer coating. It is applied to products mainly to improve anti-corrosive attributes. This product is used in the paints and coatings industry.
Request Sample Acronal® 4400 BASF Dispersions & Resins Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates...view more Acronal® 4400 is an all-acrylic aqueous polymer dispersion designed primarily for zinc oxide-free formulations. It is optimized to offer a broad spectrum of enhanced performance benefits, such as improved adhesion across a wide range of roofing substrates, improved asphalt-bleed resistance, retention of film elasticity after weathering, and higher solar reflectivity due to enhanced dirt pick-up resistance. Further, Acronal® 4400 - when combined with BASF’s Quick-Trigger 4333 additive - delivers early rain resistance under even the most challenging weather conditions. Acronal® 4400 was value engineered to provide environmental benefits in zinc-free roof coating formulations and comply with the performance parameters of ASTM D 6083 & California Title 24 protocols. view less
Request Sample Acronal® PRO 761 BASF Dispersions & Resins Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corro...view more Acronal® PRO 761 is an acrylic latex polymer for corrosion-resistant primers for industrial coating applications. It is a medium viscosity, translucent emulsion that crosslinks upon curing to form clear, transparent, non-tacky films. Adding suitable corrosion protection pigments and extenders allows systems to be formulated with outstanding corrosion protection properties.This product is recommended for applications such as interior/exterior general industrial metal coating applications and industrial maintenance applications. view less
Request Sample Altor™ 200 Polyaspartic Ester Cargill Industrial Specialties Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings.
Request Sample Altor™ 201 Polyaspartic Ester Cargill Industrial Specialties Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings.
Request Sample Altor™ 202 Polyaspartic Ester Cargill Industrial Specialties Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials.
Request Sample Altor™ 205 Polyaspartic Ester Cargill Industrial Specialties Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...view more Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. view less
Request Sample Ancamide® 220 Curing Agent Evonik Resource Efficiency GmbH, BL Crosslinkers Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings.
Aqualac AYD-127 Aquent Impex Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...view more Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). view less
Aqualac AYD-128 Aquent Impex Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...view more Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). view less
Arobras™ 1065/I ASK Chemicals Arobras™ 1065/I is a urea-formaldehyde isobutyl resin, unmodified. As for the compatibility, it shows up with excellent pigment, and is good with alkyd resins and nitrocellulose.
Arobras™ 2002 ASK Chemicals Arobras™ 2002 is a hydroxylated alkyd resin recommended for varnishes and polyurethane paint. As for the compatibility, it is shown with good nitrocellulose and alkyd resins with short oil compatible with amino-resins.
Arobras™ 5070/I ASK Chemicals Arobras™ 5070/I is a melamine-formaldehyde isobutyl resin for kiln-drying. As for the compatibility, it shows up with excellent pigment, good with alkyd resins, nitrocellulose with regular and is incompatible with oils.
Arobras™ 6120 ASK Chemicals Arobras™ 6120 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 663 ASK Chemicals Arobras ™ 663 is a short phenolated alkyd resin in soya oil. As for the compatibility, it shows up with excellent pigment, good with chlorinated rubber and Amino resins and regular oils.
Arobras™ 8040 ASK Chemicals Arobras™ 8040 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 8078 ASK Chemicals Arobras™ 8078 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it seems excellent with alkyd resins, pigments and other and with regular oils.
Arobras™ 8082 ASK Chemicals Arobras™ 8082 is a pure alkyd drying resin, short in soybean oil. As for the compatibility, it shows up with excellent pigment, good with nitrocellulose and with regular oils.
Arobras™ 9080 ASK Chemicals Arobras™ 9080 is a pure alkyd drying resin, average high solid soy oil. Shows good compatibility with other resins such as phenolated, short, medium, acrylated and regular, and compatibility with mineral oils.
Request Sample Aspartic Ester Resin Sunaspar SN220 Yantai Suny Chem International Co., Ltd. Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light cor...view more Aspartic Ester Resin Sunaspar SN220 is a solvent free amine-functional aspartic ester resin used as a reactive partner for polyisocyanates. It's used in adhesive fields, anti-corrosion surface coating for steel structure, oil pipeline, heavy and light corrosion protection, bubble landscape coating, fan blade coating and concrete water proofing materials. view less
Request Sample Aspartic Ester Resin Sunaspar SN520 Yantai Suny Chem International Co., Ltd. Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent ha...view more Sunaspar SN520 is a solvent free amine-functional aspartic ester resin used as reactive partner for polyisocyanates. This product has high solid content, low viscosity, and excellent compatibility with most hydroxy acrylate resins. It offers excellent hardness, fullness, leveling and gloss properties. It also has good resistance to weather, solvents, acids and alkalies and saline water. This product is widely used in automobile, industrial, and anti-corrosion paints. view less
BECKOSOL® 11-035 Polynt Composites BECKOSOL® 11-035 is a soy-based medium-oil alkyd that can be used in industrial primers and enamels, roller coating enamels, structural steel paints, and architectural enamels. This product is water-resistant and features good pigment-wetting properties w...view more BECKOSOL® 11-035 is a soy-based medium-oil alkyd that can be used in industrial primers and enamels, roller coating enamels, structural steel paints, and architectural enamels. This product is water-resistant and features good pigment-wetting properties with good durability. view less
BECKOSOL® 11-070 Polynt Composites BECKOSOL® 11-070 is a medium-oil soy/linseed alkyd designed to meet the resin requirements of Federal Specification TT-R-266 Type III. This product can be used in industrial primers and enamels, farm equipment finishes, and grinding vehicles. It features ...view more BECKOSOL® 11-070 is a medium-oil soy/linseed alkyd designed to meet the resin requirements of Federal Specification TT-R-266 Type III. This product can be used in industrial primers and enamels, farm equipment finishes, and grinding vehicles. It features good pigment wetting properties, with good flow, leveling, gloss, and gloss retention. view less
BECKOSOL® 12-054 Polynt Composites BECKOSOL® 12-054 is a high-viscosity, short oil TOFA alkyd that can be used in high-quality industrial baking primers and enamels. This product features good initial color and color retention, with a high reduction viscosity and exterior durability.
BECKOSOL® 12107-X-60 Polynt Composites BECKOSOL® 12107-X-60 is a chain-stopped alkyd that can be used in air-dry or low-bake industrial enamels. This product features good color and color retention, with good chemical resistance. It has a fast dry or conversion rate.
BECKOSOL® 2575-T-60 Polynt Composites BECKOSOL® 2575-T-60 is a short-oil, non-drying coconut oil alkyd resin. This product imparts hardness, flexibility, durability, high gloss, and retention of color to industrial finishes. It is compatible with a variety of standard modifiers and can be use...view more BECKOSOL® 2575-T-60 is a short-oil, non-drying coconut oil alkyd resin. This product imparts hardness, flexibility, durability, high gloss, and retention of color to industrial finishes. It is compatible with a variety of standard modifiers and can be used in high-gloss baking enamels, exterior enamels and lacquers, furniture lacquers, and enamels for metal equipment or fixtures. It can also be used as a plasticizer for nitrocellulose, cellulose acetate butyrate, or vinyl lacquers. view less
BECKOSOL® 6421-X-75 Polynt Composites BECKOSOL® 6421-X-75 is a short-oil, high solids, chain-stopped alkyd in a xylene solution that can be used in industrial maintenance finishes, aerosol enamels, lacquer modifiers, fast air-dry primers and shopcoats, and finishes for farm, road, or construc...view more BECKOSOL® 6421-X-75 is a short-oil, high solids, chain-stopped alkyd in a xylene solution that can be used in industrial maintenance finishes, aerosol enamels, lacquer modifiers, fast air-dry primers and shopcoats, and finishes for farm, road, or construction equipment, among other uses. view less
BECKOSOL® 6423-A4K4-75 Polynt Composites BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as we...view more BECKOSOL® 6423-A4K4-75 is a high-solids, chain-stopped short-oil alkyd resin supplied at 75% non-volatiles in n-butyl acetate and methyl amyl ketones. This product does not contain HAPs. It can be used in industrial maintenance primers and topcoats, as well as air-dry and force-dry finishes for farm implements, refinishes, and general industrial uses. This product dries rapidly, and the end product will have good humidity resistance and gloss retention. view less
BECKOSOL® 663-X-50 Polynt Composites BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber ...view more BECKOSOL® 663-X-50 is a short oil, rosin and phenolic modified, oxidizing alkyd solution available in xylene. It can be used in lift-primers and surfacers for lacquer systems and fast-drying industrial enamels, and can be combined with chlorinated rubber for fast-drying finishes with strong resistance to chemicals. This product exhibits good adhesion, even on hard-to-coat substrates such as zinc die castings, plastics, or fiberglass, and the end product will have hard, tough, corrosion-resistant coatings. view less
BENASOL AS 3716 Benasedo BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber...view more BENASOL AS 3716 is a non–yellowing alkyd resin having fast trough drying, good gloss, hardness, adhesion and outdoor resistance. It is suitable to produce high-solids enamels for building and industrial applications, also combining with chlorinated rubber, for farm machinery enamels, when sudden outdoor exposure is required. view less
BENASOL HS 6922 Benasedo BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...view more BENASOL HS 6922 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. view less
BENASOL HS 7100 Benasedo BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured ...view more BENASOL HS 7100 is a non yellowing alkyd resin with a particular molecular structure, endowed with very fast air drying, good gloss and colour retention, good flow, superficial hardness. Easy to be applied by brush. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance. view less
BENASOL L 50 AV Benasedo BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combin...view more BENASOL L 50 is an air-drying alkyd resin, endowed with good body, gloss and pigment wetting power. It is suitable for sealers, rust-inhibitive primers, clear and pigmented finishes for building and industrial maintenance both when used alone or in combination with other alkyd resins. view less
BYD-1008 Tianyi Chemical Engineering Material Co., Ltd. BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinkin...view more BYD-1008, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in industrial paints, leather paints, and wood paints. This product is resistant to solvents and alcohol. It is durable for kinking applications and is resistant to yellowing. view less
BYD-1016 Tianyi Chemical Engineering Material Co., Ltd. BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an ...view more BYD-1016, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne industrial paints, wood paints, glass paints, and leather varnishes. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. view less
Request Sample Basonat® HB 275 B BASF Dispersions & Resins Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical pro...view more Basonat® HB 275 B is an aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is an approximately 75% solids solution in n-butyl acetate. It offers excellent weather and chemical resistance, excellent physical properties, and non-yellowing. Basonat® HB 275 B is used to formulate lightfast and weather-resistant coatings. Aliphatic polyisocyanates are sometimes even used in primers for difficult substrates such as aluminum or plastics. view less
Benasol 4V Benasedo Benasol 4V is a very fast air drying alkyd resin phenolic modified having good through dry. It is especially recommended for rust-inhibitive metal and nitrocellulose non lifting primers, fast air–drying enamels for farm and industrial equipment.
Benester 896 Benasedo Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers...view more Benester 896 is a saturated polyester resin, slightly branched, endowed with excellent mechanical properties, high reactivity, good flow and brightness. It is employed, crosslinked with amino-resins or blocked polyisocyanates, in industrial baking primers and enamels, particularly for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less
Benzimidazolone Yellow H4G Hangzhou Tiankai (China) Enterprise Co., Ltd. Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, ind...view more Benzimidazolone Yellow H4G is a greenish shade yellow pigment that features high color strength, good heat stability, and warping resistance. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and OEM paints. view less
Benzimidazolone Yellow S3G Hangzhou Tiankai (China) Enterprise Co., Ltd. Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, indust...view more Benzimidazolone Yellow S3G is a greenish yellow pigment that features good heat stability, excellent light fastness, and weather fastness. This product has a density of 1.57 g/cm3 and a pH value of 6.5-7.5. It is commonly used in decorative paints, industrial paints, and powder coatings. view less
Boltorn™ H2004 Perstorp Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Bolt...view more Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. view less
Brominated Epoxy Oligomers Hainan Zhongxin Chemical Co., Ltd. Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excelle...view more Brominated Epoxy Oligomers (BEO) is a white to light yellow powder/granule which contains between 51-54% Bromine. It is primarily used as a flame retardant in PBT, PET, PTV, PC/ABS, ABS and HIPS high polymer alloys. It has a good melting rate with excellent thermal and light stability. view less
Brominated Polystyrene Hainan Zhongxin Chemical Co., Ltd. Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(...view more Brominated Polystyrene (BPS) is a white granule powder with a bromine content of 68% or more. It is primarily used as a flame retardant in paints and plastics. Brominated Polystyrene is suitable for the production of polyester (PET, PBT, PCT) and daiamid(nylon) ect. view less
CH-910 Yangzhou Chenhua New Material CO., LTD. CH-910 is a milky liquid which is an aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and a clear luster. CH-910 is used as a rigid substrate coating.
CH-911 Yangzhou Chenhua New Material CO., LTD. CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance ...view more CH-911 is a transparent or half-transparent liquid which has a viscosity under 100 cps. This product has an aromatic, waterborne, polyurethane resin component and an anion iconicity parameter. CH-911 provides ripping, flexibility, and chemical resistance to coatings. view less
CH-920 Yangzhou Chenhua New Material CO., LTD. CH-920 is a milky liquid which is an aromatic water-borne polyurethane resin. This product has an anionic lonic charge and a luster of 96 60oC. CH-920 is used as a rigid substrate coating.
CH-940 Yangzhou Chenhua New Material CO., LTD. CH-940 is a milky liquid which is a aliphatic water-borne polyurethane resin. This product has an anionic lonic charge and an elongation of 100 percent. Ch-940 is used as a rigid substrate coating.
CHS-Alkyd AKS 281 X 60 Spolchemie CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this...view more CHS-Alkyd AKS 281 X 60 is a short oiled extremely fast drying binder for solvent borne coatings. This product is made from soybean oil and modified with acrylates. The product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 28%. The primary use for this product is for extremely fast drying anticorrosive primers for metal and concrete surfaces. view less
CHS-Alkyd AL 3701 Spolchemie CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. Th...view more CHS-Alkyd AL 3701 is a short oiled alkyd resin binder for solvent borne coatings. This product is made from tall oil fatty acids (TOFA) and is modified with rosin and phenolic resins. This product is provided as a medium viscous 60% solution in xylene. The oil length for this product is estimated to be around 37%. This product is primarily used for fast drying, lift resistant and anticorrosion coatings. view less
CHS-Alkyd AL 3964 Spolchemie CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment ...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less
CHS-Alkyd LUR 740 NN 80 Spolchemie CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%....view more CHS-Alkyd LUR 740 NN 80 is a long oiled urethane binder for high solid coatings. This product is delivered as a high viscous 80% solution in de-aromatized white spirit with flash point higher than 61 degrees Celsius. The aromatic content is just under 1%. The oil length for this product is estimated to be 74%. CHS-Alkyd LUR 740 NN 80 is primarily used for fast drying wood and metal stains and as penetrates for anticorrosion. view less