| Altor™ 200 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 200 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. The formulation is designed to be tough but flexible, lightfast and for highly reactive two-component polyurethane spray coatings. | |
| Altor™ 202 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 202 polyaspartic ester is a low-color, solvent-free amine-functional co-reactant for polyisocyanates. This was product was designed for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. | |
| Altor™ 201 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 201 polyaspartic ester is a low-color, solvent-free amine-functional reactive partner for polyisocyanates. This low viscosity amine functional resin was developed for use in the formulation of high solids two-component polyurethane-urea coatings. | |
| Altor™ 205 Polyaspartic Ester | Cargill Industrial Specialties | Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as wel...view more Altor™ 205 is a 100% solids, UV resistant polyaspartic ester that maintains excellent cured film properties while increasing the pot life/working time when cured with an aliphatic polyisocyanate. It offers improved hardness and chemical resistance, as well as stain, scratch, and mar resistance. This product is recommended for concrete coatings, primed steel coatings, exterior railcar coatings, clean room coatings, institutional coatings, and windmill coatings. view less | |
| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...view more 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. view less | |
| 4983-BA-70 High Solids Epoxy Ester Resin | Gabriel Performance Products | 4983-BA-70 High Solids Epoxy Ester Resin gives rapid set to touch and tack free times. Very good adhesion to metal surfaces and good chemical resistance. | |
| Optirub™ SP1 A | Lawter | Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single c...view more Optirub™ SP1 A is a blend of polyethylene and PTFE wax formulated to produce a high degree of rub resistance and surface lubricity in coatings and inks. Other benefits of the wax blend include performance efficiency, formulation flexibility and a single component system. OptiruB™ SP1 A is used in flexographic and gravure inks and in heatset, sheet-fed, UV and metal decorating inks. view less | |
| Flexonic™ 601 A | Lawter | Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming ...view more Flexonic™ 601 A is an aqueous wax dispersion that has a concentrated wax blend that thrives in systems that need a high degree of transparency, gloss, slip and scratch, mar and wet rub resistance. The product uses a surfactant system that manages foaming without impacting on water resistance or contributing to incompatibility. Flexonic™ 601 A is suited for use in aqueous flexographic and gravure inks and in aqueous paper, metal, wood and OPV coatings. view less | |
| GENOMER* 1121M | Rahn USA Corp. | GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coa...view more GENOMER* 1121M is an acrylic acid ester. It is a reactive diluent for radically curable inks, coatings and adhesives. It can be used in the following applications: automotive coatings, coatings on metal and metallized substrates; coatings on plastics; coatings on glass; adhesives; and polymerization and copolymerization in emulsions and solutions. view less | Request Sample |
| WorléePol® 165 | Worlée-Chemie G.m.b.H. | WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechan...view more WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. view less | |
| Optirub™ PC A | Lawter | Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC ...view more Optirub™ PC A is a polyethylene and carnauba wax that is finely micronized and recommended for applications in which clarity, gloss and inter-coat adhesion are crucial. It provides good slip, wet scuff and block and mar resistance properties. Optirub™ PC A is suitable for use in flexographic and gravure inks, in heatset and sheet-fed inks and in UV metal deco inks. view less | |
| Optirub™ OP A | Lawter | Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax...view more Optirub™ OP A is a micronized, oxidized polyethylene that can disperse easily into aqueous systems and is formulated to give good lubricity, gloss, rub resistant and anti-blocking properties. Other benefits include rapid dispersion into aqueous systems and the elimination of wax flotation and defoamer interactions. Optirub™ OP A is used in flexographic and packaging gravure inks as well as publication gravure inks and aqueous overprint varnishes. view less | |
| Flexonic™ 902 A | Lawter | Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foa...view more Flexonic™ 902 A is a water-based polyethylene and paraffin wax dispersion for use in systems that need a high degree of gloss, wet rub resistance along with slip, scratch and mar resistance properties. The product uses a surfactant system that manages foaming without impacting on incompatibility or water resistance. Flexonic™ 902 A is suited for use in aqueous flexographic and gravure inks and in aqueous wood, paper, metal and OPV coatings. view less | |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...view more Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. view less | |
| CF6-135 | NuSil Silicone Technology 1 | CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product wil...view more CF6-135 is a one-component, high technology silicone primer that is translucent to preserve visibility with translucent products. It is specially designed to be used with platinum cured systems where conventional primers are insufficient. This product will improve the adhesion of addition-cured systems to many different substrates such as glass, metals, plastics, ceramics and other silicone material. view less | |
| CF2-135 | NuSil Silicone Technology 1 | CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as woo...view more CF2-135 is a silicone primer that is specifically designed to be used with platinum-cured systems where conventional primers will not be sufficient. This product will help to improve the adhesion of addition-cured systems to various substrates such as wood, metals, ceramics, plastics, and other silicone materials. For the best bonding results, be sure that the surface being primed is clean and degreased. view less | |
| DOUBLEMER® 421P | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 421P is a low viscosity, high purity, cycloaliphatic epoxide oligomer which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator which generates a cationic catalyst. Onium salt photoinitiators are used to ...view more DOUBLEMER® 421P is a low viscosity, high purity, cycloaliphatic epoxide oligomer which undergoes rapid polymerization when exposed to UV light in the presence of a photoinitiator which generates a cationic catalyst. Onium salt photoinitiators are used to produce the cationic species on exposure to UV light, while remaining stable in the absence of UV light. Formulations containing DOUBLEMER® 421P, along with other epoxide resins and polyol modifiers, can provide a range of cured film properties. Coatings containing DOUBLEMER® 421P generally have excellent toughness, solvent resistance, and good adhesion to a variety of substrates, including metals and plastics. view less | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...view more SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. view less | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| DOUBLEMER® 5900 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 5900 is an aliphatic urethane diacrylate oligomer diluted with 25% IBOA monomer. Films of DOUBLEMER® 5900 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. Formulated UV/EB curabl...view more DOUBLEMER® 5900 is an aliphatic urethane diacrylate oligomer diluted with 25% IBOA monomer. Films of DOUBLEMER® 5900 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. Formulated UV/EB curable products containing DOUBLEMER® 5900 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in: coatings for wood and plastic; metal coating; pigment coatings; and adhesives. view less | |
| DOUBLEMER® 5220 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 5220 is an aliphatic urethane dimethacrylate oligomer diluted with 25% IBOA monomer. Films of DOUBLEMER® 5220 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. Formulated UV/EB cur...view more DOUBLEMER® 5220 is an aliphatic urethane dimethacrylate oligomer diluted with 25% IBOA monomer. Films of DOUBLEMER® 5220 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. Formulated UV/EB curable products containing DOUBLEMER® 5220 may be applied via lithographic, screen, gravure and direct or reverse roll methods. This product is recommended for use in: coatings for wood and plastic; metal coating; pigment coatings; and adhesives. view less | |
| DOUBLEMER® 7200 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 7200 is an aromatic urethane dimethacrylate oligomer diluted with 20% IBOA monomer. Films of DOUBLEMER® 7200 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. This clear yellowish to ...view more DOUBLEMER® 7200 is an aromatic urethane dimethacrylate oligomer diluted with 20% IBOA monomer. Films of DOUBLEMER® 7200 cured by ultraviolet light (UV) or electron beam (EB) systems impart excellent flexibility and good toughness. This clear yellowish to misty yellowish liquid is recommended for use in: coatings for wood and plastic; metal coating; pigment coatings; and adhesives. view less | |
| VISIOMER® HEMA-P 100 | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion ...view more VISIOMER® HEMA-P 100 is a monofunctional methacrylate with a phosphate group in the side chain. It enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct-to-metal coatings, VISIOMER® HEMA-P100 enhances corrosion resistance and improves film strength. It can be used e.g. as a functional co-monomer in acrylic emulsion for coating resins, as a reactive co-diluent in composite resins, or as an adhesion promoter in adhesive formulations. view less | |
| VISIOMER® HEMA-P 70M | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metal...view more VISIOMER® HEMA-P 70M is a monofunctional methacrylate with a phosphate group in the side chain. Supplied in 30% methyl methacrylate, it is easy to handle due to its low viscosity. VISIOMER® HEMA-P 70M enables superior adhesion to polar surfaces like metals, glass, ceramics, and concrete. In direct to metal coatings, it enhances corrosion resistance and improves film strength. VISIOMER® HEMA-P 70M can be used e.g. as a functional co-monomer in acrylic emulsions for coating resins or as an adhesion promoter in adhesive formulations. view less | |
| GENOMER* 7151 | Rahn USA Corp. | GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use...view more GENOMER* 7151 is a carboxyfunctional polyester acrylate resin for radically curable inks and coatings and adhesives. Very good adhesion can be obtained 24 hours after curing. The use of amines may affect the properties. This product is recommended for use in the following applications: printing inks for glass, metals and metalized substrates; protective coatings for metals; and wood coatings. It is used in association with urethane acrylates, polyester or epoxy acrylates and acrylate monomers. view less | Request Sample |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less | |
| Ultrafine™ 1W A | Lawter | Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective perfo...view more Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal deco and overprint varnishes. view less |
