| UV Cure 7155 | Epoxies, Etc. | UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and ...view more UV Cure 7155 is a rigid, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7155 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less | |
| UV Cure 7156 | Epoxies, Etc. | UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals a...view more UV Cure 7156 is a Flexible, low intensity UV Curable Epoxy Resin. It is water clear and cures to a smooth, bubble free finish with good aging and yellowing resistance. It can be used as protective coating due to its ability to resist moisture, chemicals and thermal shock. UV Cure 7156 may be used as decorative ultra clear doming resins on labels, pins, key fobs, magnets, ceramics, etc. view less | |
| Uvi-Cure S105E | Sartomer Americas | UviCure S105E is a high purity, low viscosity difunctional cycloaliphatic epoxide resin which gives clear, hard, glossy coatings when polymerised with onium salt photoinitiators. | |
| Uvi-Cure S128 | Sartomer Americas | UviCure S128 is an adipate based difunctional cycloaliphatic epoxide resin which can be used alone or as an additive in UviCure S105 based formulations to increase the flexibility of a cured coating when polymerised with onium salt photoinitiators. | |
| UV Cure 60-7105 | Epoxies, Etc. | UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. Thi...view more UV Cure 60-7105 is a low viscosity urethane adhesive, coating, and potting compound. This UV curable resin exhibits good adhesion, toughness, and exterior durability. UV Cure 60-7105 does not contain any solvents and is therefore a 100% solids system. This material is a good choice for products requiring deep section curing. view less | |
| UV Cure 60-7111 | Epoxies, Etc. | UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays goo...view more UV Cure 60-7111 is a non-yellowing, UV curable urethane adhesive and encapsulant featuring high impact strength and flexibility, as well as good water and weather resistance. This product is formulated to provide low stress on electronics and displays good adhesion to a variety of substances. view less | |
| UV Cure 60-7114 | Epoxies, Etc. | UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice fo...view more UV Cure 60-7114 is a low viscosity urethane adhesive, potting compound, and coating with very good adhesion to metal and plastic substrates. This UV curable resin is formulated to provide excellent water and chemical resistance, making it a good choice for potting electronic assemblies exposed to excessive moisture. view less | |
| UV Cure 60-7180 | Epoxies, Etc. | UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating...view more UV Cure 60-7180 is a one part, UV curable adhesive that is water clear and exhibits great yellowing resistance has been formulated to cure instantly when exposed to high intensity ultraviolet light. This product is ideal for use as an adhesive and coating on a wide variety of substrates. It can also be used in small potting applications as well as decorative clear doming on labels, pins, key fobs, magnets, etc. view less | |
| UV Cure 60-7108 | Epoxies, Etc. | UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in...view more UV Cure 60-7108 is a low viscosity and optically clear UV curable epoxy system designed for fiber optic and other clear adhesive and potting applications. With good electrical insulation properties and moisture resistance, this product is ideal for use in the manufacture of electronic assemblies. Low viscosity makes it suitable for a variety of other coating applications. view less | |
| UV Cure 60-7170 | Epoxies, Etc. | UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 i...view more UV Cure 60-7170 is a one- component epoxy that cures with low intensity black light or high intensity UV lamps. This system is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. UV Cure 60-7170 is a good choice for potting and encapsulating applications due to its ability to deep section cure up to ¾ inch. Another unique and important feature is its ability to “dark cure.” Once exposed to UV light the UV Cure 60-7170 will continue to cure in the absence of light. view less | |
| UV Cure 60-7155 | Epoxies, Etc. | UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and...view more UV Cure 60-7155 is a one part epoxy adhesive and potting compound that cures with low intensity black light or high intensity UV lamps. Displaying good moisture and chemical resistance, along with a deep section cure, this product is ideal for potting and encapsulating applications. view less | |
| UV Cure 60-7156 | Epoxies, Etc. | UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is wate...view more UV Cure 60-7156 is a one part flexible epoxy adhesive and potting compound that can cure in low intensity black light or high intensity UV lamps. Its low durometer (flexibility) provides less stress on sensitive electronic components. This product is water clear, moisture and chemical resistant, and designed to be used as an adhesive, coating, or encapsulant. view less | |
| XHG-9179 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...view more XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. view less | |
| XHG-9169 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...view more XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. view less | |
| 8600 | GIMEL Technical Materials | 8600 is an amino-functional acrylate used in coatings, inks, and adhesives. It improves deep curing and surface curing with a low volatility and low odor after curing. It has no solvent and improves heat and chemical resistance. | Request Sample |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| 7155 | GIMEL Technical Materials | 7155 is a modified diacrylate ester of bisphenol A epoxy oligomer used in UV-curable adhesives, nail gels, coatings, and inks. It shows a high gloss, fast curing response, and excellent toughness and tensile strength. | Request Sample |
| 7151 | GIMEL Technical Materials | 7151 is a modified diacrylate ester of bisphenol A epoxy oligomer used in UV-curable adhesives, nail gels, coatings, and inks. It shows a high gloss, fast curing response, and excellent toughness and tensile strength. | Request Sample |
| 2115A | GIMEL Technical Materials | 2115A is a fifteen-functional urethane acrylate used in plastic coatings and vacuum metallization top coatings. It shows high hardness, a fast curing response that promotes surface curing, and excellent abrasion and scratch resistance. | Request Sample |
| GENOMER* 5695 | Rahn USA Corp. | GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibili...view more GENOMER* 5695 is a newly introduced product which brings value to LED curing. Formulations containing GENOMER* 5695 cure rapidly with UV/LED. The product brings improved reactivity and surface cure in UV applications. GENOMER* 5695 features good flexibility, low yellowing and low odor and reduces oxygen inhibition. view less | Request Sample |
| Aldirez A | Incorez Ltd. | Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and...view more Aldirez A is a bis-aldimine and works as an accelerator for moisture cure PU primers that hydrolyse on exposure to moisture, yielding a reactive amine crosslinker and an aldehyde. It is specially designed to accelerate cure in moisture cure PU systems and is suitable for use with both aromatic and aliphatic prepolymers. Aldirez A inhibits CO2 generation and it allows the formulator to accelerate the cure of PU primers with a workable application potlife. view less | |
| GENOMER* 5161 | Rahn USA Corp. | GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use ...view more GENOMER* 5161 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface cure can be realized. This product is recommended for use in the following applications: overprint varnishes; coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. view less | Request Sample |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| 8000 | GIMEL Technical Materials | 8000 is an amino-functional acrylate used in coatings, inks, and adhesives. It improved deep and surface curing and shows low volatility and low odor after curing. It is free from restricted solvents and improves heat and chemical resistance. | Request Sample |
| Sunmide® 307D-60 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 307D-60 Curing Agent is a polyamide amine in xylene and n-butanol. It displays very good thixotropic properties. It is most commonly used for fast cure and fast dry applications for industrial epoxy coatings. | Request Sample |
| GENOMER* 4256 | Rahn USA Corp. | GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental ...view more GENOMER* 4256 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. The cured oligomer shows high elongation and stress at break. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; and UV adhesives. view less | Request Sample |
| DPHA | GIMEL Technical Materials | DPHA, Dipentaerythritol hexaacrylate, is a multifunctional monomer used in UV-curable inks and coatings. | Request Sample |
| DITMPTA | GIMEL Technical Materials | DITMPTA, Ditrimethylolpropane triacrylate, is a multifunctional monomer used in UV-curable inks and coatings. | Request Sample |
| GENOMER* 4297 | Rahn USA Corp. | GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; an...view more GENOMER* 4297 is an aliphatic urethane dimethacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: dental composites; visible light curing adhesives; UV adhesives; and printed circuit boards. The product improves resistance to solvents and chemicals. view less | Request Sample |
| TMP3EOTA | GIMEL Technical Materials | TMP3EOTA, 3Ethoxylated trimethylolpropane triacrylate, is a trifunctional monomer used in UV curable ink and coatings. | Request Sample |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| ANCAMIDE® 220-IPA-73 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 220-IPA-73 Curing Agent is one in a series of standard reactive polyamides intended for use in the curing of epoxy resins. It is ideal for use in solvent-based maintenance coatings, primers, sealers, and coatings for concrete. | Request Sample |
| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...view more ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. view less | Request Sample |
| DOUBLEMER® 281 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 281 is a low viscosity multifunctional polyester acrylate oligomer designed for use in ultraviolet (UV) and electron beam (EB) curable clear overprint varnishes, flex graphic inks and high gloss coatings. It exhibits low viscosity, light color ...view more DOUBLEMER® 281 is a low viscosity multifunctional polyester acrylate oligomer designed for use in ultraviolet (UV) and electron beam (EB) curable clear overprint varnishes, flex graphic inks and high gloss coatings. It exhibits low viscosity, light color and fast curing speed. Formulated UV/EB curable products containing DOUBLEMER® 281 may be applied via lithographic, screen, gravure, direct or reverse roll and curtain coating methods. This product is recommended for use in the following applications: clear coatings for paper, wood and plastics; top coats for wood; lithographic inks and varnishes; and high gloss coatings. view less | |
| Lumicryl® 1000 | Estron Chemical, Inc. | Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternativel...view more Lumicryl® 1000 is a unique energy curable (UV/EB) acrylic resin designed to help promote adhesion to low energy surfaces such as polyethylene, polypropylene, polyesters, other thermoplastics or thermosets, metals, and coated paper substrates. Alternatively, Lumicryl® 1000 may be appropriate for use as the major film forming component of UV curable coatings. view less | |
| DABCO® DC 1 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 1 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. | |
| BYD6008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6008, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| BYD6009 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6009, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| BYD6010 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6010, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it wets underlying substrates well. It is non toxic and the end product will have a high gloss. | |
| Boltorn™ H2004 | Perstorp | Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable...view more Boltorn™ H2004 is a yellow, liquid fatty acid modified dendritic polymer that offers improved flexibility and reactivity. This product improves the chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed. Boltorn™ H2004 improves ink transfer at high speeds in printing applications and is also used in UV-curable resins and industrial coatings. view less | |
| Urethane Acrylate Dispersion SW 5200 | Soltech Ltd | Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, ...view more Urethane Acrylate Dispersion SW 5200 is a urethane acrylate dispersion used in the manufacturing of UV curable paints,, aqueous radiation-curing coatings, primers, and top coatings. This product is designed to provide low viscosity, flexibility, clarity, scratch resistance, wetting properties, and fast curing. Urethane Acrylate Dispersion SW 5200 has a slightly colloidal and milky appearance with a viscosity of <300 at 25℃. view less | |
| 8680 | GIMEL Technical Materials | 8680 is an amino-functional acrylate used in coatings, inks, adhesives, and nail gels. It improves surface curing and reduces the amount of initiator needed. It shows a low volatility and low odor after curing. When compared with ordinary active resin, it...view more 8680 is an amino-functional acrylate used in coatings, inks, adhesives, and nail gels. It improves surface curing and reduces the amount of initiator needed. It shows a low volatility and low odor after curing. When compared with ordinary active resin, it has good adhesion and toughness while improving heat and chemical resistance. view less | Request Sample |
| WorléePol® 808 | Worlée-Chemie G.m.b.H. | WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combinati...view more WorléePol® 808 is a highly reactive, low viscous polyester, which is partially water thinnable. It is used as a plastification compound in water thinnable, acid curing, or stoving finishes for paper, foils etc.. Another use of W´Pol 808, also in combination with suitable amino resins, is the production of high gloss, heat curing overprint varnishes and inks. view less | |
| IBOMA | GIMEL Technical Materials | IBOMA, Isobornyl Methacrylate, is a monomer used as a reactive diluent and is applied in radiation-curable paint, ink, and adhesive. | Request Sample |
| 2515 | GIMEL Technical Materials | 2515 is a difunctional aliphatic urethane acrylate used in UV-curable adhesives. It has excellent adhesion to plastic and high cohesion. | Request Sample |
| GENOMER* 3143 | Rahn USA Corp. | GENOMER* 3143 is a bio-based aliphatic polyester acrylate resin for UV/EB free radical-curable coatings, adhesives and 3D printing. | Request Sample |
| IBOA | GIMEL Technical Materials | IBOA, Isobornyl Acrylate, is a monofunctional monomer used as a reactive diluent that is applied in radiation-curable paint, ink, and adhesive. | Request Sample |
| GENOMER* 5142 | Rahn USA Corp. | GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in th...view more GENOMER* 5142 is an acrylated amine synergist for radically curable inks, coatings, and adhesives. When used in combination with Type II photoinitiators, increased cure speeds and improved surface can be realized. This product is recommended for use in the following applications: overprint varnishes, coatings for wood, paper and board; industrial coatings on metal and plastics; UV-adhesives; and screen and flexo inks. view less | Request Sample |
| CN294E | Sartomer Americas | CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable...view more CN294E is a clear liquid tetrafunctional acrylated polyester oligomer. This product has good chemical and heat resistance as well as good adhesion and high abrasion resistance. It also has a fast cure response, good lithographic behavior, and good pigment wetting. CN294E is used in UV curable coatings and inks including metal, paper, and plastic coatings and flexographic, screen, and lithographic inks. view less | |
| GENOMER* 2280 | Rahn USA Corp. | GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared t...view more GENOMER* 2280 is a modified bisphenol A epoxy diacrylate resin for radically curable inks, coatings and adhesives. This product is used in the following applications: coatings for paper, wood and plastics and metal decorative inks and coatings. Compared to standard bisphenol A epoxy acrylates, GENOMER* 2280 offers greater flexibility and toughness while maintaining fast cure response, high resistance properties and high hardness. view less | Request Sample |
| CN2264 | Sartomer Americas | CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, esp...view more CN2264 is a low color, polyester acrylate oligomer which has a fast cure response. This product has good hardness, high abrasion resistance, as well as good heat, chemical, and water resistance. CN2264 is developed for UV/EB-curable coatings and inks, especially where hardness and abrasion resistance are required, specifically for wood, paper, and flooring coatings and screen, inkjet, and flexo inks. view less | |
| HHPA | GIMEL Technical Materials | HHPA, hexahydrophthalic anhydride, is a monomer used in paints, epoxy curing agents, polyester resins, adhesives, plasticizers, and intermediates to prevent rust. | Request Sample |
| 616 | GIMEL Technical Materials | 616 is a tetrafunctional polyester acrylate used in inks. It has good pigment wetting, good adhesion, and a fast curing response. | Request Sample |
| 2123 | GIMEL Technical Materials | 2123 is a trifunctional aliphatic urethane acrylate used in coatings. It shows a fast curing response, yellowing resistance, high toughness, and good leveling with the film builds. | Request Sample |
| DABCO® DC 2 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reac...view more DABCO® DC 2 is a geling catalyst that gives a back-end cure similar to a tin catalyst and a similar working time as an amine catalyst. It can be used alone, or at low levels with existing amine catalysts to improve back-end cure. DABCO® DC 2 is more reactive than DABCO® DC 1. view less | |
| 713 | GIMEL Technical Materials | 713 is a difunctional amine-modified epoxy acrylate used in inks, wood coatings, and vacuum metallization coatings.It has a fast curing response, good adhesion, and excellent flexibility. | Request Sample |
| ANCAMIDE 221® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excelle...view more ANCAMIDE 221® Curing Agent is a member of a series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
| 2153 | GIMEL Technical Materials | 2153 is a trifunctional aliphatic urethane acrylate used in color middle layer nail gels. It shows excellent pigment wetting, high toughness, fast curing response, and low shrinkage. | Request Sample |
| CN299 | Sartomer Americas | CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including me...view more CN299 is a clear to hazy liquid tetrafunctional acrylated polyester oligomer. It features fast cure response, good lithographic behavior, good pigment wetting, and hydrophobic/hydrophilic balance. CN299 is used in UV-curable coatings and inks including metal, plastic, and paper coatings as well as flexographic, screen, and lithographic inks. This product also has good chemical resistance, good heat resistance, high abrasion resistance and good adhesion. view less | |
| 2036W | GIMEL Technical Materials | 2036W is a hexa functional waterborne aliphatic urethane acrylate used in waterborne coatings. It shows fast curing response, good gloss and film build, and high hardness and abrasion resistance. | Request Sample |
| DOUBLEMER® 127-100 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable...view more DOUBLEMER® 127-100 is a standard bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 127-100 may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. view less | |
| DOUBLEMER® 129 | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 129 is a standard bisphenol A epoxy diacrylate oligomer acid modified. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable...view more DOUBLEMER® 129 is a standard bisphenol A epoxy diacrylate oligomer acid modified. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss and hardness. It belongs to the most common typical UV oligomer used in various UV/EB applications such as inks, coatings and overprinting varnishes. Formulated UV/EB curable products containing DOUBLEMER® 129 may be applied via lithographic, screen, direct or reverse roll and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint garnishes, lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; fast cure coatings; and metal coating. view less | |
| S128 | GIMEL Technical Materials | S128 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and small influence on curing speed. | Request Sample |
| S123 | GIMEL Technical Materials | S123 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and small influence on curing speed. | Request Sample |
| 6483 | GIMEL Technical Materials | 6483 is a tetrafunctional modified polyester acrylate used in vacuum metallization primers, wood coating primers, and paper varnishes. It has a fast curing response with boiling water resistance and good flexibility. | Request Sample |
| S122 | GIMEL Technical Materials | S122 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and a small influence on curing speed. | Request Sample |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...view more R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. view less | |
| R-3975 | NuSil Silicone Technology 1 | R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. ...view more R-3975 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It can be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. view less | |
| 700 | GIMEL Technical Materials | 700 is a difunctional standard bisphenol A epoxy acrylate used in inks, wood coatings, printing varnishes, adhesives, and vacuum metallization primers. It has a fast curing response and good abrasion resistance. | Request Sample |
| 2600 | GIMEL Technical Materials | 2600 is a hexafunctional aromatic urethane acrylate used in lithographic inks, screen printing inks, and PCB inks. It has a fast curing response, high hardness and toughness, and good abrasion resistance. | Request Sample |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| 6208Y | GIMEL Technical Materials | 6208Y is a modified polyester acrylate used in inks and plastic coatings. It has good adhesion to plastic, a fast curing response, good pigment wetting, and a very good printing performance. | Request Sample |
| Ucopol M 602 | S.A.P.I.C.I. SpA | Ucopol M 602 is a moisture-curing polyurethane. This product is solventless and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. | |
| DOUBLEMER® 1283C | Double Bond Chemical Ind., Co., Ltd. | DOUBLEMER® 1283C is a modified bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss, good dispersion and good flexibility after coating. It is used in various UV/EB applications such as inks, coatings and overprinting varnishes. This product is a clear yellowish liquid. Formulated UV/EB curable...view more DOUBLEMER® 1283C is a modified bisphenol A epoxy diacrylate oligomer. This resin is characterized by fast cure, light color, chemical and heat resistance with high gloss, good dispersion and good flexibility after coating. It is used in various UV/EB applications such as inks, coatings and overprinting varnishes. This product is a clear yellowish liquid. Formulated UV/EB curable products containing DOUBLEMER® 1283C may be applied via lithographic, screen, gravure, direct or reverse roller and curtain coating methods. This product is recommended for use in: clear coatings for paper, paper board, wood, chipboard and rigid plastics; overprint varnishes; lithographic and screen ink; wood sealers; paper upgrading; laminating adhesives; and fast cure coatings. view less | |
| Epoxy Acrylate SE 148 | Soltech Ltd | Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings...view more Epoxy Acrylate SE 148 is an difunctional epoxy acrylate oligomer with 20% TMPTA that is designed to provide solvent resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 148 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. view less | |
| Epoxy Acrylate SE 120 | Soltech Ltd | Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, lamina...view more Epoxy Acrylate SE 120 is a difunctional epoxy acrylate oligomer designed to provide chemical resistance, water resistance, high closs, light color, and a fast cure response. This product is commonly used in applications such as overprint varnishes, laminating adhesives, wood sealers, screen inks, lithographic inks, and fast cure coatings. Epoxy Acrylate SE 120 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 60℃. view less | |
| 7183 | GIMEL Technical Materials | 7183 is a modified diacrylate ester of bisphenol A epoxy oligomer used in vacuum metallization base coatings, wood coatings, and paper varnishes. It shows a good flexibility, fast curing response, and a boiling water resistance. | Request Sample |
| 2004 | GIMEL Technical Materials | 2004 is a special modified tetra functional aliphatic urethane acrylate used in coatings, inks, and varnishes. It boasts excellent hardness and abrasion resistance with a fast curing response. Applications include coating, ink, and varnish. | Request Sample |
| nolax M14.1070 | nolax AG (Vanora) | nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor an...view more nolax M14.1070 is a solid viscous liquid, slightly yellowish in color, UV-curable pressure sensitive hot melt adhesive, with high cohesion and high peel strength. The suggested uses are in UV curable hot melt, for direct skin contact, having a low odor and high MVTR. Depending on the viscosity, the adhesive can be processed on slot die, screen printing, and roller coating equipment. Tests for dermatological harmless approval must be checked, for each application. nolax M14.1070 has a flash point greater than 150 °C and a viscosity of 63000 mPa•s at 130°C. view less | |
| Epoxy Acrylate SE 146 | Soltech Ltd | Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applicat...view more Epoxy Acrylate SE 146 is a difunctional epoxy acrylate oligomer with 25% TPGDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, light color, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 146 is 75% polymer solid by weight with a viscosity of 8,000-14,000 at 25℃. view less | |
| Epoxy Acrylate SE 147 | Soltech Ltd | Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as ...view more Epoxy Acrylate SE 147 is an difunctional epoxy acrylate oligomer with 20% HDDA that is designed to provide chemical resistance, water resistance, low viscosity, high gloss, and a fast curing response. This product is commonly used in applications such as fast cure coatings, laminating adhesives, overprint varnishes, lithographic inks, screen inks, and wood sealers. Epoxy Acrylate SE 147 is 80% polymer solid by weight with a viscosity of 6,500-10,500 at 25℃. view less | |
| 236 | GIMEL Technical Materials | 236 is a hexa functional aliphatic urethane acrylate used in plastic and wood coatings. It shows a fast curing response with excellent gloss and good film builds. It has high hardness and good abrasion resistance. | Request Sample |
| 2292H | GIMEL Technical Materials | 2292H is a trifunctional water-soluble aliphatic urethane acrylate used in 3D printing. It shows good water solubility that can be washed without stickiness, high hardness and good toughness, fast curing response and low odor. | Request Sample |
| 2102D | GIMEL Technical Materials | 2102D is a difunctional aliphatic urethane acrylate used in extension nail gels and UV-curable adhesives. It shows high hardness, excellent toughness, and high gloss with very low heat release. | Request Sample |
| Epoxy Acrylate SE 1605 | Soltech Ltd | Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is c...view more Epoxy Acrylate SE 1605 is a partially acrylated ester of a bisphenol A type epoxy resin that contains both acrylate and epoxy properties that is designed to provide solvent resistance, high gloss, flexibility, and a good curing response. This product is commonly used in applications such as metal substrate inks, metal substrate coatings, and 2 component curing systems, Epoxy Acrylate SE 1605 is 100% polymer solid by weight with a viscosity of 800-1,200 at 60℃. view less | |
| 6582 | GIMEL Technical Materials | 6582 is a tetrafunctional polyester acrylate used in vacuum metallization primers, wood coatings, paper varnishes, and inks. It has a fast curing response with excellent adhesion, good flexibility and leveling, and a boiling water resistance. | Request Sample |
| GENOMER* 4205 | Rahn USA Corp. | GENOMER* 4205 is an aliphatic urethane methacrylate. It is a resin for radically curable inks, coatings and adhesives. This product is used in the following applications: dental composites, sterolithography and adhesives. | Request Sample |
| 6380 | GIMEL Technical Materials | 6380 is a hexafunctional polyester acrylate used in plastic coatings, wood coating primers, and inks. It has a fast curing response with good scratch resistance and pigment-wetting. It shows high gloss with excellent adhesion. | Request Sample |
| New! GENOMER* 4281 | Rahn USA Corp. | GENOMER* 4281 is a medium viscosity, bio-based urethane acrylate resin for radically curable inks, coatings, adhesives, and 3D printing. Exhibiting low colour and an excellent combination of hardness and flexibility. | Request Sample |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...view more ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. view less | Request Sample |
| R32-2186 | NuSil Silicone Technology 1 | R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bo...view more R32-2186 is a two-part, translucent, thixotropic, high tear strength silicone adhesive that cures rapidly with the application of heat in an oven, or by a heat gun or lamp. It does not require atmospheric moisture to cure. This adhesive can be used for bonding and sealing silicones to each other and other substrates such as metals and plastics. This product is ready for rapid production or prototyping due to its rapid cure rate. view less | |
| 2102C | GIMEL Technical Materials | 2102C is a difunctional aliphatic urethane acrylate used in extension nail gels and UV-curable adhesives. It shows yellowing resistance, excellent toughness and abrasion resistance, and high gloss with very low heat release. | Request Sample |
| ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta | Penn Color, Inc. | ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGD...view more ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Magenta uses pigment PR 122 with 20% pigment loading. view less | Request Sample |
| ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet | Penn Color, Inc. | ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA...view more ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet is a sustainable solution, offering low energy curing, broad compatibility, and various degrees of functionality to ensure optimal performance. ASTRAD-UV Tri (Propylene Glycol) Diacrylate (TRPGDA) Violet uses pigment PV 23 with 20% pigment loading. view less | Request Sample |
| 7322 | GIMEL Technical Materials | 7322 is a difunctional modified epoxy acrylate used in nail color gels, UV adhesives, paints, and inks. It has low color and odor with good flexibility and pigment-wetting. It shows a fast curing response and good surface dry. | Request Sample |
| R33-2186 | NuSil Silicone Technology 1 | R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding s...view more R33-2183 is a fast-curing silicone adhesive that cures at room temperature, or rapidly with the use of heat in an oven, or a heat gun lamp. It does not require atmospheric moisture to cure. This product can be used as an adhesive for sealing and bonding silicones to each other and other substrates such as metals and plastics. It is best used for applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F). view less | |
| Coronate® 2030 | Tosoh Corporation | Coronate® 2030 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. | |
| Coronate® 2031 | Tosoh Corporation | Coronate® 2031 is a fast-curing polyisocyanate resin, in the form of a pale yellow liquid, that contains isocyanurate rings. This product finds application in wood sanding sealers, metal paints, and gravure inks. |
