UL Prospector

Success!

Successfully saved your search
AR-511 Chan Sieh Enterprises Co, Ltd. AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...view more AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. view less
AR-514 Chan Sieh Enterprises Co, Ltd. AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aroma...view more AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aromatics, and esters. view less
AR-517 Chan Sieh Enterprises Co, Ltd. AR-517 is a styrene-acrylic copolymer resin that displays good hardness, high gloss, and good chemical resistance. This product can be used in paints and coatings for road marking, marine, concrete, and interior and exterior wall applications.
Arobras™ 2424 ASK Chemicals Arobras™ 2424 is a catalyst for polyurethane systems. It was developed for use as an accelerator of reaction.
Arobras™ 2570 ASK Chemicals Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different...view more Arobras™ 2570 is an accelerator-based oxidizing agents developed for the system based on alkyd oils and resins. Its formulation is balanced with all the necessary environment for drying or kiln agents. Variations in amount of Arobras™ 2570 offer different drying time by increasing or decreasing the working time as needed. It is compatible with all alkyd-based oils. view less
BECKOSOL AQ® 400 Polynt Composites BECKOSOL AQ® 400 is a short-oil, chain-stopped alkyd latex. This product appears as a milky white liquid that offers good water-resistance and adhesion to a variety of road substrates, including concrete, asphalt and aggregates. It can be used in pavement...view more BECKOSOL AQ® 400 is a short-oil, chain-stopped alkyd latex. This product appears as a milky white liquid that offers good water-resistance and adhesion to a variety of road substrates, including concrete, asphalt and aggregates. It can be used in pavement marking paints (non-highway applications), particularly zone and curb marking paints and non-fast track traffic paints. view less
BECKOSOL® 11-081 Polynt Composites BECKOSOL® 11-081 is a medium-oil soy alkyd for air-dry and bake systems that can be used in traffic paints, structural steel paints, and baking primers. It can also be used as a grinding vehicle. This product features exterior durability, initial gloss, a...view more BECKOSOL® 11-081 is a medium-oil soy alkyd for air-dry and bake systems that can be used in traffic paints, structural steel paints, and baking primers. It can also be used as a grinding vehicle. This product features exterior durability, initial gloss, and good gloss retention. view less
BECKOSOL® 11-090 Polynt Composites BECKOSOL® 11-090 is a medium-oil soya alkyd containing 60% non-VOCs in VM&P naphtha. This product offers durability, abrasion-resistance, and water-resistance. It can be used in traffic paints.
BECKOSOL® 11081-E2 Polynt Composites BECKOSOL® 11081-E2 is a medium-oil soy alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents that can be used in maintenance enamels, traffic marking paints, and architectural enamels, including porch and deck applications. This product has a...view more BECKOSOL® 11081-E2 is a medium-oil soy alkyd supplied in tertiary butyl acetate and Aromatic 100 solvents that can be used in maintenance enamels, traffic marking paints, and architectural enamels, including porch and deck applications. This product has a formulating latitude to meet HAPs requirements, and includes conventional solids for a good drying speed and hardness development. view less
BECKOSOL® 1700-M-60 Polynt Composites BECKOSOL® 1700-M-60 is an air-dry, long oil, siliconized copolymer alkyd that meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels. This product exhibits high gloss and color re...view more BECKOSOL® 1700-M-60 is an air-dry, long oil, siliconized copolymer alkyd that meets the vehicle requirements of Federal Specifications TT-E-490E and TT-E-1593B for silicone alkyd interior and exterior enamels. This product exhibits high gloss and color retention on exterior exposures, and resists fading. It may be used in transportation equipment, exterior maintenance coatings, outdoor signs, metal siding and other metal surfaces, and enamels on metal surfaces where high gloss and color retention are desired in air-dry enamels. view less
BECKOSOL® 6440-A4-85 Polynt Composites BECKOSOL® 6440-A4-85 is a medium-oil, high solids, chain-stopped alkyd resin that can be used in utility enamels, railroad equipment finishes, farm and implement enamels, heavy equipment finishes, and air-dry primers. This product dries fast for medium-oi...view more BECKOSOL® 6440-A4-85 is a medium-oil, high solids, chain-stopped alkyd resin that can be used in utility enamels, railroad equipment finishes, farm and implement enamels, heavy equipment finishes, and air-dry primers. This product dries fast for medium-oil alkyds. It may be formulated so that the end product has low VOC below 3.0 lbs/gal. view less
BECKOSOL® AA-220-E2 Polynt Composites BECKOSOL® AA-220-E2 is a medium-oil, soy alkyd reduced in VOC-exempt t-butyl acetate solvent that can be used in traffic paint applications. This product has a quick time toward no pickup. It is incompatible with drying oils, melamines, urea, and nitrocel...view more BECKOSOL® AA-220-E2 is a medium-oil, soy alkyd reduced in VOC-exempt t-butyl acetate solvent that can be used in traffic paint applications. This product has a quick time toward no pickup. It is incompatible with drying oils, melamines, urea, and nitrocellulose, but works well with pigments. view less
BECKOSOL® IA-441 Polynt Composites BECKOSOL® IA-441 is a short-oil soy alkyd reduced to 55 +/- 1% non-volatiles in toluene, which can be used in non-coning traffic paints. This product features flexibility, durabilty, adhesion, and fast solvent release.
Crestacryl® 71-8026 Scott Bader Crestacryl® 71-8026 is a thermoplastic acrylic resin that displays good hardness, adhesion, and elasticity. This product is ideal for use in fast-drying, high grade road-marking paints.
Crestacryl® 71-9044 Scott Bader Crestacryl® 71-9044 is a thermoplastic acrylic resin that displays good hardness, elasticity, and adhesion properties. This product is ideal for use in fast-drying, high quality road-marking paints with excellent durability.
Crestakyd® 30-8062 Scott Bader Crestakyd® 30-8062 is a short oil air-drying alkyd that displays quick drying and high hardness properties. This product is ideal for use in air-drying primers and finishes for metal and wood, as well as road marking paints.
Disvalkyd-551 D.S.V. Chemicals Pvt. Ltd. Disvalkyd-551 is an alkyd resin that has been modified with a styrene resin. This product is made from fast-drying oils and penta polyols. It can be used in traffic paints, hammertone finishes, and fast-drying alkali-resistant industrial finishes and co...view more Disvalkyd-551 is an alkyd resin that has been modified with a styrene resin. This product is made from fast-drying oils and penta polyols. It can be used in traffic paints, hammertone finishes, and fast-drying alkali-resistant industrial finishes and coatings. view less
Disvipol-252 D.S.V. Chemicals Pvt. Ltd. Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives.
Disvipol-271 D.S.V. Chemicals Pvt. Ltd. Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels.
ECOPOLFIX Ecopol Tech ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good ...view more ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good elasticity, low water absorption and steam proof, dust repellent, abrasion resistant and soil stabilizer. view less
Request Sample EPS® 2717 EPS Materials EPS® 2717 is a high solids all-acrylic emulsion offering fast dry times and early water resistance. It is ideal for use in marking paints for parking lots or other applications not requiring instant in-service dry.
Epotec® YD 134 A Aditya Birla Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...view more Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. view less
Epoxy Resin HJ828 Shandong Huijin Chemical Co., Ltd. Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a ...view more Epoxy Resin HJ828 is a polymer that is formed by reacting epoxide units. When this product is cross-linked or hardened with compatible curing agents, it forms excellent mechanical, adhesive, dielectric and chemical resistance properties. Epoxy Resin is a highly versatile substance which has become a standard when used in formulation, fabrication and fusion technology. This product is best utilized as an adhesive and structural material. view less
Filtrez™ 3305 A Lawter Filtrez™ 3305 A is a maleic modified rosin ester made for the thermoplastic pavement marking industry. The resin needs less liquid plasticizer in the finished application and is ideally suited for use in coatings and pavement markings.
Filtrez™ 3310 A Lawter Filtrez™ 3310 A is a maleic modified rosin ester for use in nitrocellulose-based ink systems that need lower aromaticity to be compatible with alcohols in the system. It has good adhesion and is considered ideal for use in coatings and pavement markings.
Filtrez™ 3320 A Lawter Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings.
Flytac 197-100 Guangzhou Flying Dragon Chemical Ltd. Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-100 has a softening point (R&B) of 100 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made especially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less
Flytac 197-105 Guangzhou Flying Dragon Chemical Ltd. Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-105 has a softening point (R&B) of 105 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. It has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less
Flytac 197-110 Guangzhou Flying Dragon Chemical Ltd. Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proce...view more Flytac 197-110 has a softening point (R&B) of 110 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less
Flytac 197-95 Guangzhou Flying Dragon Chemical Ltd. Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceed...view more Flytac 197-95 has a softening point (R&B) of 95 ± 2°C, a color (Gardner Grade) of 4 max., and an acid value of 25mg KOH/g max. It is a hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints. It is made specially for marking road-marking paints which have good resistance to crushing, abrasion and smudge, appropriate leveling and fast drying. This product also has good resistance to yellowing and aging, and is suitable for all kinds of bitumen road surface and cement road surface. view less
G-100 Modified Petroleum Resin (C5/C9) Yangzhou Sunchem Co., Ltd. G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...view more G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. view less
G-110 Modified Petroleum Resin (C5/C9) Yangzhou Sunchem Co., Ltd. G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...view more G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. view less
HC125 Tianyi Chemical Engineering Material Co., Ltd. HC125, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. I...view more HC125, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less
HC125B Tianyi Chemical Engineering Material Co., Ltd. HC125B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC125B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less
HC130 Tianyi Chemical Engineering Material Co., Ltd. HC130, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. I...view more HC130, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less
HC130A Tianyi Chemical Engineering Material Co., Ltd. HC130A, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC130A, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less
HC130B Tianyi Chemical Engineering Material Co., Ltd. HC130B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC130B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less
HIKOREZ A-1100 Kolon HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking.
HIKOREZ C-1100 Kolon HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...view more HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. view less
HIKOREZ T-1095 Kolon HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives.
HIKOREZ T-1100 Kolon HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives.
HMR100 Wuzhou Longteng Chemical Co., Ltd. HMR100 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasio...view more HMR100 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 97-103°C. view less
HMR105 Wuzhou Longteng Chemical Co., Ltd. HMR105 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasio...view more HMR105 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 102-108°C. view less
HMR110 Wuzhou Longteng Chemical Co., Ltd. HMR110 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasio...view more HMR110 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It has resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 107-113°C. view less
HMR95 Wuzhou Longteng Chemical Co., Ltd. HMR95 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It ha resistance to crushing, crocking, abrasion ...view more HMR95 is a pale yellow, transparent with beads, thermoplastic traffic paint resin. This product is derived from gum rosin and other raw materials and is used to make white or yellow hot-melt traffic paint. It ha resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 92-98°C. view less
HR100 Tianyi Chemical Engineering Material Co., Ltd. HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less
HR100A Tianyi Chemical Engineering Material Co., Ltd. HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less
HR100B Tianyi Chemical Engineering Material Co., Ltd. HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less
HR105 Tianyi Chemical Engineering Material Co., Ltd. HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less
HR110 Tianyi Chemical Engineering Material Co., Ltd. HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging view less
HR95 Tianyi Chemical Engineering Material Co., Ltd. HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing ...view more HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less
HRC5 Wuzhou Longteng Chemical Co., Ltd. HRC5 is a kind of thermal plasticizing resin produced by C5 or by-products of petroleum cracking, through pretreatment, polymerization and distillation. This product is specifically designed for white or yellow hot-melt traffic paint to provide resistance...view more HRC5 is a kind of thermal plasticizing resin produced by C5 or by-products of petroleum cracking, through pretreatment, polymerization and distillation. This product is specifically designed for white or yellow hot-melt traffic paint to provide resistance to crushing, crocking, abrasion, aging and yellowing as well as appropriate leveling and quick drying properties. view less
Request Sample Joncryl® 934 BASF Dispersions & Resins Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Jo...view more Joncryl® 934 is a high equivalent weight polyol designed for low isocyanate demand, 2-component polyurethane coatings. High solids coatings that are as low as 2.9 pounds per gallon of VOC can be formulated to spray by conventional or airless equipment. Joncryl® 934 displays good cure rate and pot life. This product should be considered as a candidate for high performance maintenance and transportation coatings as a replacement for conventional solids urethane finishes. view less
Request Sample Joncryl® OH 8314 BASF Dispersions & Resins Joncryl® OH 8314 is a hydroxyl functional acrylic dispersion for two-component polyurethane coatings designed with an indication of end of useful life (pot life). Unique synthesis allows for performance advantages and provides characteristics comparable t...view more Joncryl® OH 8314 is a hydroxyl functional acrylic dispersion for two-component polyurethane coatings designed with an indication of end of useful life (pot life). Unique synthesis allows for performance advantages and provides characteristics comparable to solventborne systems. Coatings formulated with Joncryl® OH 8314 exhibit good durability and feature a low viscosity, low isocyanate demand with excellent flow and leveling. Innovative processing provides a clean water phase which results in low foaming and reduced water sensitivity, an advantage for various applications. view less
KRATON® D1101 AIM Polymer Kraton Polymers International Ltd. KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...view more KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1101 AS Polymer Kraton Polymers International Ltd. KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...view more KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1101 ASM Polymer Kraton Polymers International Ltd. KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1101 AT Polymer Kraton Polymers International Ltd. KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...view more KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1101 AU Polymer Kraton Polymers International Ltd. KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...view more KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1101 ES Polymer Kraton Polymers International Ltd. KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less
KRATON® D1101 ESM Polymer Kraton Polymers International Ltd. KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...view more KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less
KRATON® D1101 ET Polymer Kraton Polymers International Ltd. KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...view more KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. view less
KRATON® D1155 JO Polymer Kraton Polymers International Ltd. KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...view more KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1155 JOP Polymer Kraton Polymers International Ltd. KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...view more KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1184 ES Polymer Kraton Polymers International Ltd. KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1184 ESM Polymer Kraton Polymers International Ltd. KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1184 ET Polymer Kraton Polymers International Ltd. KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1186 AS Polymer Kraton Polymers International Ltd. KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1186 ASM Polymer Kraton Polymers International Ltd. KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
KRATON® D1186 AT Polymer Kraton Polymers International Ltd. KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less
ML100 Guangxi Zhongchang Resin Co., Ltd. ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active ...view more ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active oxygen diminish. It does not pollute the air and contains strong wear and leveling that enables anti-yellowing and anti-aging advantages. view less
MR100 Wuzhou Longteng Chemical Co., Ltd. MR100 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to ...view more MR100 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 97-103°C. view less
MR105 Wuzhou Longteng Chemical Co., Ltd. MR105 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to ...view more MR105 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 102-108°C. view less
MR115 Wuzhou Longteng Chemical Co., Ltd. MR115 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to ...view more MR115 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 102-108°C. view less
MR120 Wuzhou Longteng Chemical Co., Ltd. MR120 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to ...view more MR120 is a slight yellow transparent solid of gum rosin and maleic anhydride derived from the esterification of glycerol through heat and light stabilizing. This product is commonly used for white or yellow hot-melt traffic paint to provide resistance to crushing, crocking, abrasion and aging as well as appropriate leveling and quick drying properties. With good adhesion, it also has binding qualities for the road marking paints with a softening point range of 107-113°C. view less
Maleic Acid Resin SMM-115 Zhaoqing Zhongbang Chemicals Co., Ltd. Maleic Acid Resin SMM-115 is an irregular transparent solid with a softening point of 110-117°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for roa...view more Maleic Acid Resin SMM-115 is an irregular transparent solid with a softening point of 110-117°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for road marking paints. view less
Maleic Acid Resin SMM-120 Zhaoqing Zhongbang Chemicals Co., Ltd. Maleic Acid Resin SMM-120 is an irregular transparent solid with a slightly higher softening point of 117-125°C. This product has multiple applications including being used to improve the hardness of paint films such as gloss, and also it can act as an ad...view more Maleic Acid Resin SMM-120 is an irregular transparent solid with a slightly higher softening point of 117-125°C. This product has multiple applications including being used to improve the hardness of paint films such as gloss, and also it can act as an adhesive or binder for road marking paints. view less
Maleic Acid Resin SMM-130 Zhaoqing Zhongbang Chemicals Co., Ltd. Maleic Acid Resin SMM-130 is an irregular transparent solid with a softening point of 127-135°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for roa...view more Maleic Acid Resin SMM-130 is an irregular transparent solid with a softening point of 127-135°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for road marking paints. view less
Maleic Acid Resin SMM-130A Zhaoqing Zhongbang Chemicals Co., Ltd. Maleic Acid Resin SMM-130A is an irregular transparent solid with a slightly higher softening point of 127-135°C. This product can be used in the making of phenolic paints, and its other primary uses are to improve the hardness of paint films such as glo...view more Maleic Acid Resin SMM-130A is an irregular transparent solid with a slightly higher softening point of 127-135°C. This product can be used in the making of phenolic paints, and its other primary uses are to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for road marking paints. view less
Maleic Acid Resin SMM-140 Zhaoqing Zhongbang Chemicals Co., Ltd. Maleic Acid Resin SMM-140 is an irregular transparent solid with a softening point of 136-145°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for roa...view more Maleic Acid Resin SMM-140 is an irregular transparent solid with a softening point of 136-145°C. This product can be used in the making of phenolic paints, to improve the hardness of paint films such as gloss, and also act as an adhesive or binder for road marking paints. view less
Request Sample NeoCryl® AF-10 DSM Coating Resins, LLC. NeoCryl® AF-10 is a water-based acrylic Fluoro copolymer emulsion for application in 2-component coatings. NeoCryl® AF-10 exhibits excellent chemical resistance and is a good choice for Anti-Graffiti coatings. NeoCryl® AF-10 when cross linked with a water...view more NeoCryl® AF-10 is a water-based acrylic Fluoro copolymer emulsion for application in 2-component coatings. NeoCryl® AF-10 exhibits excellent chemical resistance and is a good choice for Anti-Graffiti coatings. NeoCryl® AF-10 when cross linked with a water dispersible isocyanate resists most solvents, acids and bases. view less
Quintone® C200H (ZCT) Zeon Corporation Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Ce...view more Quintone® C200H (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 101 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. view less
Quintone® C200S Zeon Corporation Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it ...view more Quintone® C200S is a petroleum made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 96 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. view less
Quintone® C210 (ZCT) Zeon Corporation Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Cel...view more Quintone® C210 (ZCT) is a petroleum resin made mainly from 1,3-pentadiene that has been abstracted from C5 fractions. This product can be used in hot-melt traffic paints and provides good heat stability and colors. Its softening point is 110 degrees Celsius and it contains 1.7 mg of potassium hydroxide per gram. view less
Reversol 3108 Synthomer Reversol 3108 is a linoleic rich fatty acids modified, medium oil pentaerythritol esterified alkyd resin. This product is used in automotive refinishing enamels, air drying industrial enamels, and road marking paints.
Request Sample SILIKOPON® ED Evonik Resource Efficiency GmbH, BL Coating Additives SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel,...view more SILIKOPON® ED is a silicone epoxy resin with good chemical resistance and excellent corrosion resistance. It is suitable for ultra high solids coatings. Applications include industrial and anti-corrosion coatings, offshore/marine areas, structural steel, rail car and tank construction, concrete walls and floors, and commercial transport coatings. view less
Request Sample SILIKOPON® EF Evonik Resource Efficiency GmbH, BL Coating Additives SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...view more SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. view less
Sen-tech™ Signs Resin RR100 SEN-TECH SILVICHEMICAL TECHNOLOGY (GUILIN) CO., LTD. Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, ...view more Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, pressure and abrasion resistance, anti-pollution, and anti-aging properties. Sen-tech™ Signs Resin RR95 has a softening point from 85 to 95°C and finds application in hot-melt road marking paints used for a variety of asphalt and concrete pavement. view less
Sen-tech™ Signs Resin RR110 SEN-TECH SILVICHEMICAL TECHNOLOGY (GUILIN) CO., LTD. Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, ...view more Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, pressure and abrasion resistance, anti-pollution, and anti-aging properties. Sen-tech™ Signs Resin RR95 has a softening point from 85 to 95°C and finds application in hot-melt road marking paints used for a variety of asphalt and concrete pavement. view less
Sen-tech™ Signs Resin RR95 SEN-TECH SILVICHEMICAL TECHNOLOGY (GUILIN) CO., LTD. Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, ...view more Sen-tech™ Signs Resin RR95 is a solid rosin resin made from a high molecular polymer, unsaturated dibasic acid, and polyol by condensation that has been heat and light stabilizer added, then esterified. These yellow transparent granules provide adhesion, pressure and abrasion resistance, anti-pollution, and anti-aging properties. Sen-tech™ Signs Resin RR95 has a softening point from 85 to 95°C and finds application in hot-melt road marking paints used for a variety of asphalt and concrete pavement. view less
Setal 11-1495 Nuplex Resins LLC Setal 11-1495 is a higher solids chain-stopped soybean oil alkyd for use in the manufacture of coatings that must comply with lower VOC levels. Coatings based upon this resin are characterized by high specular gloss, good color retention and a high order ...view more Setal 11-1495 is a higher solids chain-stopped soybean oil alkyd for use in the manufacture of coatings that must comply with lower VOC levels. Coatings based upon this resin are characterized by high specular gloss, good color retention and a high order of resistance to sunlight degradation. This product meets decreased VOC requirements, has lower viscosity, good hardness and adhesion, has good metal wetting properties, and has good gloss development and good color retention. It can be used for industrial metal enamels, automotive and rail car refinishes, and increased solids maintenance coatings and marine finishes. view less
Setal 11-2460 Nuplex Resins LLC Setal 11-2460 is a higher solids medium soybean oil alkyd designed for use as a modifier in air dry coatings. It produces films with high gloss and good flexibility. This product is recommended for rail car enamels, industrial maintenance primers and shop...view more Setal 11-2460 is a higher solids medium soybean oil alkyd designed for use as a modifier in air dry coatings. It produces films with high gloss and good flexibility. This product is recommended for rail car enamels, industrial maintenance primers and shop coats, and for bridge paints and architectural coatings. view less
Setal 11-2463 Nuplex Resins LLC Setal 11-2463 is a medium soybean oil alkyd designed for use in general purpose high drink air dry or force dry coatings. It exhibits good color retention properties, toughness, flexibility and durability. This product is suitable for use in machinery an...view more Setal 11-2463 is a medium soybean oil alkyd designed for use in general purpose high drink air dry or force dry coatings. It exhibits good color retention properties, toughness, flexibility and durability. This product is suitable for use in machinery and implement enamels, industrial maintenance and shop coats, floor finishes and traffic marking paints. view less
Setalux 17-1190 Nuplex Resins LLC Setalux 17-1190 is an acrylic polyol designed for use with aliphatic polyisocyanates in two-component coatings. It exhibits excellent gloss and DOI, application properties, exterior durability and gloss retention. This product should be used in clearcoat...view more Setalux 17-1190 is an acrylic polyol designed for use with aliphatic polyisocyanates in two-component coatings. It exhibits excellent gloss and DOI, application properties, exterior durability and gloss retention. This product should be used in clearcoats for vehicle refinishes, solid color systems for refinishing and transportation coatings and industrial 2-component topcoats. view less
Setalux 17-1196 Nuplex Resins LLC Setalux 17-1196 is an acrylic polyol that, when combined with appropriate aliphatic polyisocyanates, provides rapid ambient curing properties, good thorough hardening, excellent durability, good chemical resistance, and outstanding gloss retention. It sho...view more Setalux 17-1196 is an acrylic polyol that, when combined with appropriate aliphatic polyisocyanates, provides rapid ambient curing properties, good thorough hardening, excellent durability, good chemical resistance, and outstanding gloss retention. It should be used in transportation/equipment coatings, clearcoats for vehicle refinishing, topcoats for steel and plastics and as a basis for chemical maintenance coatings. view less
Setalux 17-1608 Nuplex Resins LLC Setalux 17-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. Its features include excellent drying and application properties with good outdoor durability and flexibility. This product ...view more Setalux 17-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. Its features include excellent drying and application properties with good outdoor durability and flexibility. This product is suitable for high performance coatings for wood, metal, or plastics and can be used with transportation, chemical maintenance or construction equipment. view less
Setalux 17-1762 Nuplex Resins LLC Setalux 17-1762 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. Its features include excellent drying and application properties with good outdoor durability and flexibility. This product i...view more Setalux 17-1762 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. Its features include excellent drying and application properties with good outdoor durability and flexibility. This product is suitable for high performance coatings for wood, metal, or plastics and can be used with transportation, chemical maintenance or construction equipment. view less
Special Resin SMR-100 for Road Marking Paint Zhaoqing Zhongbang Chemicals Co., Ltd. Special Resin SMR-100 for Road Marking Paint is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road markin...view more Special Resin SMR-100 for Road Marking Paint is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road marking. It has good resistance to yellowing and aging as well with a softening point of 98-103°C. view less
Special Resin SMR-100A for Road Marking Paints Zhaoqing Zhongbang Chemicals Co., Ltd. Special Resin SMR-100A for Road Marking Paints is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road mark...view more Special Resin SMR-100A for Road Marking Paints is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road marking. It has good resistance to yellowing and aging as well with a softening point of 98-103°C. view less
Special Resin SMR-105 for Road Marking Paints Zhaoqing Zhongbang Chemicals Co., Ltd. Special Resin SMR-105 for Road Marking Paints is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road marki...view more Special Resin SMR-105 for Road Marking Paints is irregular hemisphere particles which have a strong resistance to crushing, crocking and abrasion. This product is the primary chemical used as a binder in the production of paint that is used for road marking. It has good resistance to yellowing and aging as well with a softening point of 103-108°C. view less