HPP-I-9725-20-100 | US Polymers - Accurez LLC | HPP-I-9725-20-100 is a water reducible, 100% solids modified oil for wood stains. | Request Sample |
Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
VISIOMER® PEG 8000 DMA W | Evonik Performance Materials GmbH, BL Oil Additives | VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures...view more VISIOMER® PEG 8000 DMA W (Polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic, crosslinking monomer. It is used as a co-monomer in formulations for joint sealants to close construction gaps in concrete slabs, decks, and similar structures. view less | |
ORGASOL® 2002 D NAT 1 | Arkema | ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption in waterborne, solvent born, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 20µm. view less | Request Sample |
LAROMER® UP 9118 | BASF Dispersions & Resins | LAROMER UP 9118 is an unsaturated polyester resin for the formulation of radiation-curable putties, primers and topcoats for wood and wood products. It is very easy to matt and gloss can be significantly reduced with small amount of matting agent. | |
GENOMER* 4293 | Rahn USA Corp. | GENOMER* 4293 is a bio-based aliphatic polyester urethane acrylate. Resin for radically curable inks and coatings, adhesives and 3D printing. The product has a high viscosity, but it can be rapidly reduced by adding reactive diluent. | Request Sample |
ORGASOL® 1002 D NAT 1 | Arkema | ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction a...view more ORGASOL® 1002 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 20µm. view less | Request Sample |
ORGASOL® 2001 EXD NAT 1 | Arkema | ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2001 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 2001 UD NAT 1 | Arkema | ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. view less | Request Sample |
ORGASOL® 2002 ES3 NAT 3 | Arkema | ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES3 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 30µm. view less | Request Sample |
ORGASOL® 2002 ES4 NAT 3 | Arkema | ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES4 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 40µm. view less | Request Sample |
ORGASOL® 2002 ES5 NAT 3 | Arkema | ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES5 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 50µm. view less | Request Sample |
ORGASOL® 2002 ES6 NAT 3 | Arkema | ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of frictio...view more ORGASOL® 2002 ES6 NAT 3 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology melting temperature is 177. The average rate diameter of 60µm. view less | Request Sample |
ORGASOL® 1002 ES5 NAT 1 | Arkema | ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction...view more ORGASOL® 1002 ES5 NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-6 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption make it suitable as well in waterborne, solvent born or solvent-free technology with reduced impact on rheology. High melting point temperature, above 210°C. The average diameter of 50µm. view less | Request Sample |
JONCRYL® 1907 | BASF Dispersions & Resins | JONCRYL 1907 is a film forming emulsion used as a blend vehicle to impart flexibility, adhesion and reduced solvent demand. This product is used for wood finishes and hardboard primers. It is also suitable for interior gloss brushing enamels and as a modi...view more JONCRYL 1907 is a film forming emulsion used as a blend vehicle to impart flexibility, adhesion and reduced solvent demand. This product is used for wood finishes and hardboard primers. It is also suitable for interior gloss brushing enamels and as a modifier to improve chalk penetration. view less | |
ORGASOL® 2001 UD NAT 2 | Arkema | ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction ...view more ORGASOL® 2001 UD NAT 2 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 5µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 2002 EXD NAT 1 | Arkema | ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction...view more ORGASOL® 2002 EXD NAT 1 is used as a matting agent (from satin to deep matt) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. This polyamide-12 powder reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 177°C. The average diameter of 10µm. Compliant with FDA regulations (FDA 177-1500 and FDA 175-300). view less | Request Sample |
ORGASOL® 3501 EXD NAT 1 | Arkema | ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ...view more ORGASOL® 3501 EXD NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 10µm. view less | Request Sample |
ORGASOL® 3502 D NAT 1 | Arkema | ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits ab...view more ORGASOL® 3502 D NAT 1 is used as a matting agent (from satin to deep matte) in all kinds of coatings, varnishes, or ink in addition to improving abrasion, scratch, scrub and burnish resistance. The porosity of this copolyamide-6/12 powder grade permits absorption exceeds of solvent in the ink-receptive layer for the transfer paper market. It reduces the coefficient of friction and provides haptic properties (from soft touch/smooth to textured), flexibility, and blocking resistance. The low oil absorption makes it suitable as well in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 142°C. The average diameter of 20µm. view less | Request Sample |
JONCRYL® 95 | BASF Dispersions & Resins | JONCRYL 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. JONCRYL 95 is recommended for interior waterborne wo...view more JONCRYL 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. JONCRYL 95 is recommended for interior waterborne wood coatings for furniture or millwork applications view less | |
DOWSIL™ 402LS Additive | Dow Performance Silicones | DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a f...view more DOWSIL™ 402LS Additive is a silicone additive which reduces the coefficient of friction of wood coatings, and offers blocking resistance, while improving the flow and levelling properties for the formulation. It performs at very low levels and exhibit a favorable environmental and health profile: it contains no solvent, no benzene, toluene, xylene, and meets European food contact regulations. view less | |
RILSAN® D30 NAT | Arkema | RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D30 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 21-27µm. view less | Request Sample |
RILSAN® D40 NAT | Arkema | RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D40 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 27-31µm. view less | Request Sample |
RILSAN® D50 NAT | Arkema | RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more RILSAN® D50 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 40-46µm. view less | Request Sample |
RILSAN® D60 NAT | Arkema | RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it sui...view more RILSAN® D60 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 43-55µm. view less | Request Sample |
RILSAN® D80 NAT | Arkema | RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it su...view more RILSAN® D80 NAT is a 100% bio-based polyamide 11 used to texture all kinds of coatings, varnishes, or ink in addition to improving abrasion and scratch resistance. This polyamide-11 powder provides anti-slip properties. The low oil absorption makes it suitable in waterborne, solvent-borne, or solvent-free technology with reduced impact on rheology. The melting point temperature is 186°C. The average diameter of 95-105µm. view less | Request Sample |
BENALAC UR 81 | Benasedo | BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance....view more BENALAC UR 81 is a solventless aromatic urethane modified oil endowed with fast air drying properties, hardness and gloss. It finds applications as a vehicle in “off set“ inks by reducing the tack-free time and improving levelling and rub test resistance. Due to its excellent pigments wetting properties is particularly suitable as grinding vehicle. It is also suitable for interior and exterior clear varnishes and for wood stains in compliance with CE 2004 – 42 requirements for the VOC reduction. view less | |
CoatOSil* DRI Waterborne Silicone | Momentive | CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic wate...view more CoatOSil DRI waterborne silicone can help reduce water uptake and improve UV resistance in organic waterborne coating compositions. Its innovative chemical structure enables it to overcome the difficulties of combining silicone materials with organic waterborne resins. This product has been shown to improve hydrophobicity and elongation properties when used as a cobinder with acrylic latexes, resulting in more flexible coatings and sealants. CoatOSil DRI waterborne silicone may also be considered as a sole binder when maximizing thermal and UV stability is a priority. When applied alone, this product typically cures at room temperature to form an elastomeric film. *CoatOSil, Momentive and the Momentive logo are trademarks of Momentive Performance Materials Inc. view less | |
WorléeSol E 927 W | Worlée-Chemie G.m.b.H. | WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with ...view more WorléeSol E 927 W is a short oil PU alkyd emulsion for the manufacture of airdrying water thinnable paint systems. This grade has a non volatile content of 40% ± 2. W´Sol E 927 W is mainly used for the production of water thinnable lacquers for wood with excellent through drying and hardness even without the addition of a co-drier. W´Sol E 927 W also shows good compatibility with acrylic dispersions. view less |