UL Prospector

Success!

Successfully saved your search
4653-V-50 Rosin Modified Alkyd Gabriel Performance Products 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers.
4702-X-50 Chain Stopped Alkyd Resin Gabriel Performance Products 4702-X-50 Chain Stopped Alkyd Resin is based on low rosin, tall oil fatty acids. This resin gives rapid set and tack free times in air dry systems.
4714-P-75 Chain Stopped Water Soluble Alkyd Resin Gabriel Performance Products 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...view more 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. view less
4731-X-80 High Solids Polyester Resin Gabriel Performance Products 4731-X-80 High Solids Polyester Resin is a low molecular weight, oil free polyester resin designed to be cross linked with melamine type resins in high solids baking enamels.
4770-X-60 Short Oil Alkyd Resin Gabriel Performance Products 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability.
4778-X-50 Phenolic/rosin Modified Alkyd Resin Gabriel Performance Products 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used ...view more 4778-X-50 Phenolic/rosin Modified Alkyd Resin is a short oil, phenolic and rosin modified alkyd resin supplied at 50% non-volatile by weight. It is a rapid setting resin for use in lift resistant primers and fast drying industrial enamels. It can be used in the following government specification finishes: TT-P-64C, TT- E-515A, and MIL-E-15090C, Type II. view less
4845-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated.
4915-PMA-85 High Solids Short Oil Alkyd Gabriel Performance Products 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents.
4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil Gabriel Performance Products 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings.
4986-V-50 VT Modified Alkyd Resin Gabriel Performance Products 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels.
4996 Long Oil Alkyd Resin Gabriel Performance Products 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings.
4997-X-50 Epoxy Ester Resin Gabriel Performance Products 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat.
5009-BS-70 Water Reducible Alkyd Resin Gabriel Performance Products 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles.
5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin Gabriel Performance Products 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...view more 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. view less
5018-X-50 Acrylic Modified Alkyd Resin Gabriel Performance Products 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...view more 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. view less
5121-BC-85 Water Reducible Alkyd Resin Gabriel Performance Products 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...view more 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. view less
AFCONA - 1501 AFCONA Additives Sdn Bhd AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems ...view more AFCONA - 1501 is a modified fatty acid polymer in a water solution. This product is compatible with resins most commonly used in water-based coatings and provides pigment wetting, stabilizing performance, and is able to cross-link in polyurethane systems and baking paints. AFCONA - 1501 functions as a universal dispersing resin tailor-made for the production of aqueous-based universal pigment concentrates, finding application in water-based coatings. view less
AFCONA - 1503 AFCONA Additives Sdn Bhd AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of ...view more AFCONA - 1503 is a modified fatty acid polymer in a water solution, free of solvents and amines. This product is a universal dispersing resin with self-emulsifying properties and is suitable for use in VOC-free pigment concentrates, in the production of tinting systems where low shear force is used, and in systems with a wide pH range. AFCONA - 1503 finds application in water- and solvent-based decorative paint systems. view less
AM-636 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistanc...view more AM-636, in the form of a clear liquid, is a unique isocyanate based cross-linker disperse-able in water for the use with acrylic and polyurethane resins. It improves the solvent resistance, water resistance, toughness, block resistance, abrasion resistance, and flexibility. AM-636 is solvent free and features a low viscosity for ease of integration into coating. view less
AM-71 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in...view more AM-71, in the form of a whitish liquid, is an alkali swell-able thixotropic type of thickener for viscosity control of all coatings. Water resistance of the coating is affected to a slighter degree than other types of thixotropic thickeners. It is used in leather base coat or topcoat applications at levels from 1-3% to increase viscosity and enhance the rheology properties of the coating. view less
AM-80 Quaker Color (a Division of McAdoo & Allen, Inc.) AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applicatio...view more AM-80, in the form of a translucent liquid, is a rheological additive based on a new hydrophobic chemistry different from the ethoxylated urethane thickeners. It has applications in color coats and base coats and it is used in leather base coat applications at levels from 1-4% to increase viscosity and enhance the rheology properties of roll coated base coats. . view less
AR-515 Chan Sieh Enterprises Co, Ltd. AR-515 is an IBMA homo-polymer acrylic resin. This product has high tolerance for pigments and low odour. It can be used in aerosol paints and inks. AR-515 creates a flexible film and is solvent in ketones and aromatics.
AR-531 Chan Sieh Enterprises Co, Ltd. AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent ...view more AR-531 is a BMA copolymer acrylic resin. This product has a high tolerance for pigments, and shows good heat resistance. It can be used in aerosols, packaging inks, flexo and gravure printing inks, alkyd paints, and parquet polishes. AR-531 is solvent in alcohols, ketones, aromatics, and esters. view less
Abiester 90 Spolchemie Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks.
Abifen 125 D Spolchemie Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...view more Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. view less
Request Sample Acronal® 4160 BASF Dispersions & Resins Acronal® 4160 is an aqueous styrene-acrylic copolymer dispersion for creating versatile waterproofing membranes that resist standing water, withstand negative-side hydrostatic pressure, and prevent water intrusion. Formulations using Acronal® 4160 will pr...view more Acronal® 4160 is an aqueous styrene-acrylic copolymer dispersion for creating versatile waterproofing membranes that resist standing water, withstand negative-side hydrostatic pressure, and prevent water intrusion. Formulations using Acronal® 4160 will provide exceptional waterproofing performance for interior and exterior coating applications. view less
Request Sample Acronal® 4312 BASF Dispersions & Resins Acronal® 4312 is used for moisture vapor barriers over concrete and waterproofing. It is stable in mortars as well. This product is non-APEO and non-ammonia.
Request Sample Acronal® 4420 BASF Dispersions & Resins Acronal® 4420 is an acrylic binder for use in air barriers, waterproofing and cellulosic tapes, and asphalt. It offers superior moisture vapor permeability with low water uptake. This product is non-APEO.
Request Sample Acronal® 4787 BASF Dispersions & Resins Acronal® 4787 is an all purpose styrene acrylic used in adhesives, primers and coatings. It provides high strength, adhesion and water/alkali resistance. This product has low viscosity and is non-APEO.
Request Sample Acronal® NX 2727 na BASF Dispersions & Resins Acronal® NX 2727 na is an aqueous anionic dispersion of a polymer based on acrylic ester and styrene. It can be used as a primer coating to bind fine surface dust on composite substrates.
Request Sample Acronal® S 400 NA BASF Dispersions & Resins Acronal S 400 NA is an acrylic dispersion offering excellent crack bridging performance for flexible cementitious roof coatings.
Acrylic Resin GA-003 DKSH Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can ...view more Acrylic Resin GA-003 is a solid acrylic resin containing epoxy functionality (GMA acrylic). It is used in thermosetting powder coatings to provide excellent outdoor durability. Typical applications include automotive trim and wheel clear coat. GA-003 can be used with curative like 1, 12-dodecanedioic acid (DDDA) to produce clear coating of high gloss, smoothness and clarity. Other polyacrylic acids and polyanhydrides can also be used as curatives for specific coating properties. This product is available in Europe, Asia and North America. view less
Adhesion Promoter SZ 9166 Soltech Ltd Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is...view more Adhesion Promoter SZ 9166 is a silicon acrylate designed to provide light color, low viscosity, light color, adhesion, low odor, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9166 is 100% polymer solid by weight with a viscosity of 1,800-3,600 at 25℃. view less
Adhesion Promoter SZ 9167 Soltech Ltd Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesio...view more Adhesion Promoter SZ 9167 is an acrylate modified acidic adhesion promoter designed to provide light color, low viscosity, adhesion, high reactivity, and stability. Common applications of this product include UV cure coatings and EB cure coatings. Adhesion Promoter SZ 9167 is 100% polymer solid by weight with a viscosity of 2,000-4,000 at 25℃. view less
Agrol Diamond® BioBased Technologies Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (...view more Agrol Diamond® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Diamond® contains 86% bio-based content (ASTM D6866) and 70% primary hydroxyl groups. view less
Agrol Platinum™ BioBased Technologies Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ conta...view more Agrol Platinum™ is a liquid-mannich polyols derived from a highly reactive cashew nutshell liquid, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Platinum™ contains 80.8% bio-based content (ASTM D6866) and Three functional primary hydroxyl groups containing polyol. view less
Agrol Prime™ A-110 BioBased Technologies Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weigh...view more Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-110 contains 1,000 molecular weight polyol and 67% primary hydroxyl groups. view less
Agrol Prime™ A-56 BioBased Technologies Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight...view more Agrol Prime™ is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Product. Agrol Prime™ A-56 contains 2,000 molecular weight polyol and 67% primary hydroxyl groups. view less
Agrol® 2.0 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...view more Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). view less
Agrol® 3.0 AO BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6...view more Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 3.0 AO contains 97% bio-based content (ASTM D6866). view less
Agrol® 3.6 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...view more Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). view less
Agrol® 4.0 BioBased Technologies Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM...view more Agrol® is a soy-based polyols derived from purified soybean oil, and is suitable for all polyurethane applications. Made from an annually renewable feedstock, it is a USDA Certified Biobased Products. Agrol® 2.0 - 4.0 contains 99% bio-based content (ASTM D6866). view less
Alcohol Soluble Maleic Resin SL A130-6 SWISLOYD LIMITED Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pri...view more Alcohol Soluble Maleic Resin SL A130-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, view less
Alcohol Soluble Maleic Resin SL A145-10 SWISLOYD LIMITED Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and pr...view more Alcohol Soluble Maleic Resin SL A145-10 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 145±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, view less
Allyl Pentaerythritol Perstorp Allyl Pentaerythritol (APE) is mainly used as a crosslinker in various acrylic polymers used as thickeners.
Alpha-Rez™ 9200 E Lawter Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear condi...view more Alpha-Rez™ 9200 E is a hybrid resin comprised of a rosin base and a structured visco-elastic hydrocarbon that displays high solubility and viscosity. The product is fast setting with a high gloss and shows high rheological stability under high shear conditions. It also has a high critical toning index which is crucial for waterless offset inks. Alpha-Rez™ 9200 E is suitable for use in web offset, coldset and heatset applications as well as in letterpress and sheet-fed systems. view less
Amino Modified Polysiloxane R-8104 Zhejiang Feidian Chemical Co., Ltd. R-8104 is an amino modified polysiloxane. It maintains good amino reaction activity and coupling effect, and it provides better storage activity and low volatility. This product is widely used in modified plastics and coating applications.
Aqualac AYD-127 Aquent Impex Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...view more Aqualac AYD-127 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 180-190 (g/eq). view less
Aqualac AYD-128 Aquent Impex Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potti...view more Aqualac AYD-128 is a high quality, high performance, easy to use basic epoxy resin. It is colorless or yellow viscous liquid with low toxicity. Applications include use in coatings, adhesives, anticorrosion, electric insulation, laminated plates and potting fields or used as the raw material for high –grade epoxy resin processing. It has an epoxy equivalences of 184-194 (g/eq). view less
Aqualac AYD-801 Aquent Impex Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...view more Aqualac AYD-801 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-801 has and epoxy equivalent of 450~500 (g/eq) and softening point of 65~75 (℃). view less
Aqualac AYD-802 Aquent Impex Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...view more Aqualac AYD-802 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-802 has and epoxy equivalent of 600~700 (g/eq) and softening point of 81~89 (℃). view less
Aqualac AYD-803 Aquent Impex Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...view more Aqualac AYD-803 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-803 has and epoxy equivalent of 700~900 (g/eq) and softening point of 90~96 (℃). view less
Aqualac AYD-803U Aquent Impex Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...view more Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). view less
Aqualac AYD-804 Aquent Impex Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material ...view more Aqualac AYD-804 is a light yellow functional epoxy resin with low toxicity, characterized by higher softening point with wide molecule weight distribution. It is of high-molecule-weight compound of even polymerization degree. The product of such material has stronger impact resistance and flexibility. It is mainly used in coating and painting business. Aqualac AYD-804 has and epoxy equivalent of 900~1000 (g/eq) and softening point of 96~107 (℃). view less
Aqualac AYDPG- 660 Aquent Impex Aqualac AYDPG- 660 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 140-200 (g/eq).
Aqualac AYDPG- 669 Aquent Impex Aqualac AYDPG- 669 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 125-143 (g/eq).
Aqualac AYDPG-300 Aquent Impex Aqualac AYDPG-300 is a nonpoisonous, non-harmful epoxy resin. It is suitable for adhesives, casting, coatings, and non-solvent paints. It has an epoxy equivalent of 285-310 (g/eq).
Arobras™ 1770 ASK Chemicals Arobras™ 1770 is a thermosetting resin used for modifying alkyd resins. It has excellent compatibility with alkyd resins.
Arobras™ 663 ASK Chemicals Arobras ™ 663 is a short phenolated alkyd resin in soya oil. As for the compatibility, it shows up with excellent pigment, good with chlorinated rubber and Amino resins and regular oils.
Aromatic C9 Hydrocarbon Resin Aquatac I100 Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...view more Aromatic C9 Hydrocarbon Resin Aquatac I100 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I100 has an Gardner colour value of 3-4. view less
Aromatic C9 Hydrocarbon Resin Aquatac I120S Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polyme...view more Aromatic C9 Hydrocarbon Resin Aquatac I120S is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I120S has an Gardner colour value of 4-5. view less
Aromatic C9 Hydrocarbon Resin Aquatac I140 Aquent Impex Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer...view more Aromatic C9 Hydrocarbon Resin Aquatac I140 is a tackifier resin which provides tack and adherence to varied surfaces and also influence through low color, odorless, and stable product. As a tackifier, it offers high thermal stability, light color, polymer compatibility, and low odor. Aromatic C9 Hydrocarbon Resin Aquatac I140 has an Gardner colour value of 5-6. view less
Aromatic Soluble Maleic Resin SL E120-6 SWISLOYD LIMITED Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and pr...view more Aromatic Soluble Maleic Resin SL E120-6 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 120±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, view less
Aromatic Soluble Maleic Resin SL E130-5 SWISLOYD LIMITED Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and pr...view more Aromatic Soluble Maleic Resin SL E130-5 is made from gum rosin and maleic anhydride via esterification with polyhydric alcohol. This product appears as clear flakes or granules with a softening point of 130±5°C. It is often used in surface coatings and primers to improve the gloss, hardness, drying speed, abrasion resistance and yellow resistance, view less
B-3000 Chan Sieh Enterprises Co, Ltd. B-3000 is an acrylic resin in the form of a brown liquid. This product offers good water solubility. It can be used as a binder for baking paint applications.
BECKOSOL® 12035-E1 Polynt Composites BECKOSOL® 12035-E1 is a short-oil coconut alkyd resin in a VOC-exempt solvent. This product has low color and color retention. It can be used as a plasticizer for nitrocellulose lacquers, as a vehicle for conversion varnishes, and in low-HAP and VOC bakin...view more BECKOSOL® 12035-E1 is a short-oil coconut alkyd resin in a VOC-exempt solvent. This product has low color and color retention. It can be used as a plasticizer for nitrocellulose lacquers, as a vehicle for conversion varnishes, and in low-HAP and VOC baking enamels. view less
BECKOSOL® 90-095 Polynt Composites BECKOSOL® 90-095 is a non-oxidizing short coconut oil alkyd resin. This product offers good color and color retention, high gloss, and does not yellow enamels. It can be used in high-temperature baking enamels and as a plasticizer for clear or light-color...view more BECKOSOL® 90-095 is a non-oxidizing short coconut oil alkyd resin. This product offers good color and color retention, high gloss, and does not yellow enamels. It can be used in high-temperature baking enamels and as a plasticizer for clear or light-colored lacquers. view less
BENASOL AS 452 Benasedo BENASOL AS 452 is an air-drying low-viscosity, non-yellowing alkyd resin especially modified so to guarantee very good wetting properties with pigments, fillers and wide compatibility with various binder types used in different formulations.
BENCRYL PU 137 Benasedo BENCRYL PU 137 is a linear aliphatic urethane acrylated oligomer endowed with very good flexibility, good hardnes and adhesion on wood, plastic and paper. It is an ideal UV curing binder for wood floor coatings.
BS-088N Quaker Color (a Division of McAdoo & Allen, Inc.) BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish...view more BS-088N, in the form of a clear liquid, is a fluorosurfactant leveling and wetting aid for water base leather coatings. It can be used in leather base or topcoat applications to reduce surface tension, promote flow, and eliminate surface defects like fish eyes or craters. view less
BS-287 Quaker Color (a Division of McAdoo & Allen, Inc.) BS-287, in the form of a translucent liquid, is silica based flatting agent with a very fine particle size. It is used in leather topcoat or base coat applications to reduce or adjust gloss levels of the coating system.
BYD-1002A Tianyi Chemical Engineering Material Co., Ltd. BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It...view more BYD-1002A, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne refinishing paints, wooden paints, and rubber paints. This product is non-flammable and resistant to scratching. It is pollution-free. view less
BYD-1014 Tianyi Chemical Engineering Material Co., Ltd. BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no afte...view more BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no after-tack with this product under high temperature conditions. view less
BYD-1348 Tianyi Chemical Engineering Material Co., Ltd. BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil...view more BYD-1348, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used as a surface varnish coating for transfer papers, particularly vacuum aluminizing paper, gold paper, silver paper, and aluminum foil paper applications. This product is non-toxic. Its substrate is an anionic aliphatic water-based polyurethane. view less
BYD3510 Tianyi Chemical Engineering Material Co., Ltd. BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-r...view more BYD3510, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in elastic interior or exterior wall coatings, gigging coatings, and one-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less
BYD3520 Tianyi Chemical Engineering Material Co., Ltd. BYD3520, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in two-component waterproof coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements.
BYD3928 Tianyi Chemical Engineering Material Co., Ltd. BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compat...view more BYD3928, in the form of a white, water-based anionic emulsion, is a styrene acrylic copolymer that can be used in stone coatings, relief coatings and both exterior and interior wall coatings. This product is waterproof and alkali-resistant. It is compatible with color pastes and cements. view less
BYD7630 Tianyi Chemical Engineering Material Co., Ltd. BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...view more BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. view less
BactiBlock® 101 R4.47 Laboratorios Argenol BactiBlock® 101 R4.47 is an antimicrobial additive to be used by compounding into many polymeric materials. It is designed to be incorporated before, during or after the manufacturing process to impart antimicrobial activity to the manufactured products. ...view more BactiBlock® 101 R4.47 is an antimicrobial additive to be used by compounding into many polymeric materials. It is designed to be incorporated before, during or after the manufacturing process to impart antimicrobial activity to the manufactured products. BactiBlock® 101 R4.47 suppresses the growth of algae, mold, mildew, fungi and bacteria which cause unpleasant odors, discoloration, staining, deterioration or corrosion only. When incorporated into treated articles, this product does not protect users of any such treated article or others against food borne or disease causing bacteria, viruses, germs or other disease causing organisms. It can be used in the manufacture of polymer, paints, plastic and latex products. view less
BarrierPro® 4545 Mallard Creek Polymers, Inc. BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applica...view more BarrierPro® 4545 is a general purpose latex binder of medium to high stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4545 can be compounded with fillers and other additives to form coatings for a variety of applications. Because of its high strength film, it makes an excellent product for blending with other BarrierPro® products to strengthen waterproof membranes, specialty paints, and sealants. view less
BarrierPro® 4550 Mallard Creek Polymers, Inc. BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications su...view more BarrierPro® 4550 is a general purpose latex binder of medium stiffness. It dries to form a flexible, tough film of high water resistance. BarrierPro® 4550 can be compounded with fillers and other additives to form coatings for a variety of applications such as damp proof membranes, specialty paints and sealants. view less
BarrierPro® 4551 Mallard Creek Polymers, Inc. BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excell...view more BarrierPro® 4551 is a carboxylated styrenebutadiene emulsion with excellent strength properties, high resistance to liquid water and water vapor, high blush resistance and excellent adhesion to multiple construction substrates. BarrierPro® 4551 has excellent stability with dry-add inorganic fillers and sets quickly into a low tack, high strength, water resistant film. BarrierPro® 4551 is also a good base polymer for blending with other BarrierPro® products to allow a membrane to be custom tailored to a specific strength and/or flexibility need. view less
BarrierPro® 4555 Mallard Creek Polymers, Inc. BarrierPro® 4555 is a general purpose latex binder of low stiffness. It dries to form a soft but tough film. Its softness makes it excellent for damp proofing where films must remain flexible at below freezing temperatures.
Benasol HS 754 Benasedo Benasol HS 754 is a non yellowing alkyd resin , endowed with good air drying, gloss and colour retention. It is suggested for white and coloured air-drying enamels with high solid content, in the building sector and for internal and external maintenance.
Benester 27 Benasedo Benester 27 is a sligty branched hydroxylated polyester resin. It is recommended for baking systems, crosslinked with amino resins and/or blocked aliphatic polyisocyanates, and particularly indicated for back coatings enamels in coil coating applications.
Benester 742 Benasedo Benester 742 is a slightly branched saturated polyester having a very good adhesion on aluminium and galvanized steel. Good balance between flexibility and surface hardness, colour and exterior resistance.
Benester 839 Benasedo Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industria...view more Benester 839 is a saturated polyester resin, slightly branched, endowed with excellent mechanical and high reactivity properties matched with good flow and brightness. It is employed, crosslinked with amino- resins or blocked polyisocyanates, in industrial baking primers and enamels, especially for base- coats and over-print varnishes with good printability properties also with UV inks, in cans, spray-bottles and collapsible tubes. view less
Benzidine Yellow G Hangzhou Tiankai (China) Enterprise Co., Ltd. Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-bas...view more Benzidine Yellow G is a diarylide aniline yellow pigment that features high transparency, high tinting and color strength, and good liquidity. This product has a density of 1.5 g/cm3 and a pH value of 6.0-7.0. It is commonly used in offset inks, water-based inks, solvent-based inks, and coatings. view less
Berlin Blue Hangzhou Tiankai (China) Enterprise Co., Ltd. Berlin Blue is a dark blue powder pigment featuring good color strength. This product is insoluble in water, ethanol and ether, and has a density of 1.8 g/cm3 and a pH value of 6-8. It finds application in coatings.
Biolin 100 ASK Chemicals Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains n...view more Biolin 100 is a solvent-free copolymer resin based on renewable materials. Due to its high content of unsaturated double bonds and the hydrophobic polymer backbone Biolin 100 features a rapid air-drying with excellent final hardness. Biolin 100 contains no siccative and therefore cobalt free or cobalt driers can be used. Biolin 100 can be used as 1K resin to formulate air-drying jointing compounds and sealants. Its distinct wetting behavior with various substrates like quartz sand and rubber granules is just one further advantage. view less
Black 722 Hangzhou Tiankai (China) Enterprise Co., Ltd. Black 722 is a black iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.5% and a pH value of 5-8. It fi...view more Black 722 is a black iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.5% and a pH value of 5-8. It finds application in various types of coatings. view less
Blue 6101 Hangzhou Tiankai (China) Enterprise Co., Ltd. Blue 6101 is a blue iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and finds application in vari...view more Blue 6101 is a blue iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and finds application in various types of coatings. view less
Bluepur 2937 S.A.P.I.C.I. SpA Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K ...view more Bluepur 2937 is a waterborne polyurethane dispersion. This product has a self cross-linking behaviour that confers high hardness in the end system. It can be used to formulate transparent or pigmented coatings, especially in the formulation of 1K or 2K waterborne systems. view less
Brown 686 Hangzhou Tiankai (China) Enterprise Co., Ltd. Brown 686 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It fi...view more Brown 686 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It finds application in various types of coatings. view less
Brown 860 Hangzhou Tiankai (China) Enterprise Co., Ltd. Brown 860 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It fi...view more Brown 860 is a brown iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0% and a pH value of 4-7. It finds application in various types of coatings. view less
Request Sample Butanol® NS 104 BASF Dispersions & Resins Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibi...view more Butanol® NS 104 is an extensible, high molecular weight, resin-oil compatible styrene butadiene dispersion suitable for flooring adhesives and asphaltic emulsion waterproofing. It promotes webbing/legging. This product also improves elasticity and flexibility at low temperatures. It is non-APEO and non-ammonia. view less
Request Sample Butanol® NS 198 BASF Dispersions & Resins Butanol® NS 198 is a cationic, high molecular weight styrene butadiene dispersion designed for use in asphalt modification and waterproofing. It improves strength, ductility and flexibility. This product is non-APEO and non-ammonia.
Request Sample Butofan® NS 299 BASF Dispersions & Resins Butofan® NS 299 is an aqueous aqueous non-carboxylated butadiene-styrene copolymer dispersion for use in flooring adhesives and asphalt modification.
C9 Resin Yangzhou Sunchem Co., Ltd. C9 Resin is a light yellow granular synthetic resin that has a pH value of 6-8 and an acid value of 0.5 mgKOH/g maximum. This product is used as a raw material for adhesives, sealants, coatings, and printing inks.
C9-10 SWISLOYD LIMITED C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...view more C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. view less