| Filtrez™ 3320 A | Lawter | Filtrez™ 3320 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Filtrez™ 3320 A is considered suitable for use in gravure and flexographic inks and coatings. | |
| Filtrez™ 339 A | Lawter | Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure i...view more Filtrez™ 339 A is a maleic modified rosin ester made for ink and nitrocellulose lacquer systems that have low aromatic solvents. Benefits of using the resin include higher gloss, adhesion and hardness. Filtrez™ 339 A is used in flexographic and gravure inks and coatings. view less | |
| Filtrez™ 521 A | Lawter | Filtrez™ 521 A is a fumaric modified rosin ester, soluble in alcohol with a high acid value and softening point. The product's broad compatibility and solubility allow it to be an important consideration in flexographic printing inks. | |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...view more Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. view less | |
| Filtrez™ 530 A | Lawter | Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found i...view more Filtrez™ 530 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and softening point. Its low viscosity in aqueous ammonia solutions and alcohol, makes for high gloss in overprint varnishes. Filtrez™ 530 A is usually found in water-based gravure and flexographic inks and solvents. view less | |
| Filtrez™ 531 A | Lawter | Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-bas...view more Filtrez™ 531 A is a fumaric modified rosin ester, soluble in alcohol and with a moderately high acid value, but high softening point. The resin provides leveling and gloss and is an especially useful agent in floor polishes. It can be applied in water-based flexographic and gravure inks and solvents. view less | |
| Filtrez™ 567 A | Lawter | Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced perf...view more Filtrez™ 567 A is a fumaric modified rosin ester that is soluble in alcohol with similar characteristics as acrylic resins as far as transfer, drying, gloss and water resistance of the dry film. Its chemical difference leads it to display an enhanced performance when compared to other water-soluble resins. Filtrez™ 567 A is ideally suited for use in gravure and flexographic inks and coatings. view less | |
| Filtrez™ 591 A | Lawter | Filtrez™ 591 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and good solubility in glycol systems. Along with a low molecular weight and the nature of the rosin, the benefits combine to ensure an enhanced pigment recept...view more Filtrez™ 591 A is a fumaric modified rosin ester, soluble in alcohol and with a high acid value and good solubility in glycol systems. Along with a low molecular weight and the nature of the rosin, the benefits combine to ensure an enhanced pigment reception to wetting. The product is particularly suited for use in moisture set inks and pigment striking applications. view less | |
| Filtrez™ 618 A | Lawter | Filtrez™ 618 A is a phenolic modified rosin ester displaying high solubility in aliphatic and vegetable oils. It was created to provide good pigment wetting properties with low viscosity being an added feature. The product finds uses in offset inks and co...view more Filtrez™ 618 A is a phenolic modified rosin ester displaying high solubility in aliphatic and vegetable oils. It was created to provide good pigment wetting properties with low viscosity being an added feature. The product finds uses in offset inks and coatings. view less | |
| Filtrez™ 620 A | Lawter | Filtrez™ 620 A is a phenolic-modified rosin ester displaying high solubility in aliphatic and vegetable oils. The product was created to provide good pigment wetting ability and complements this feature by offering low viscosity. It is primarily used in g...view more Filtrez™ 620 A is a phenolic-modified rosin ester displaying high solubility in aliphatic and vegetable oils. The product was created to provide good pigment wetting ability and complements this feature by offering low viscosity. It is primarily used in grinding and flushing vehicles in offset inks and coatings. view less | |
| Filtrez™ 629 A | Lawter | Filtrez™ 629 A is a phenolic modified rosin ester that has medium viscosity with low solubility in aliphatic solvents. The product was created as a workhorse resin showing good gel reactivity with aluminum solvents. Filtrez™ 629 A is ideally suited for us...view more Filtrez™ 629 A is a phenolic modified rosin ester that has medium viscosity with low solubility in aliphatic solvents. The product was created as a workhorse resin showing good gel reactivity with aluminum solvents. Filtrez™ 629 A is ideally suited for use in heatset and sheet-fed inks. view less | |
| Filtrez™ 656 A | Lawter | Filtrez™ 656 A is a phenolic modified rosin ester with a high viscosity and good solubility in aliphatic solvents. It was created as an elastic resin, showing gel structure without the need for additional chelates. The resin is regarded as a good foundati...view more Filtrez™ 656 A is a phenolic modified rosin ester with a high viscosity and good solubility in aliphatic solvents. It was created as an elastic resin, showing gel structure without the need for additional chelates. The resin is regarded as a good foundation for creating heatset and sheet-fed systems. view less | |
| Filtrez™ 672 A | Lawter | Filtrez™ 672 A is a phenolic modified rosin ester with a high viscosity, good solubility in aliphatic solvents and created as an elastic resin gel structure. The product offers a good base for the creation of heatset and sheet-fed systems in high temperat...view more Filtrez™ 672 A is a phenolic modified rosin ester with a high viscosity, good solubility in aliphatic solvents and created as an elastic resin gel structure. The product offers a good base for the creation of heatset and sheet-fed systems in high temperature and shear applications. It is considered ideal for use in offset inks and coatings. view less | |
| Filtrez™ 681 A | Lawter | Filtrez™ 681 A is a phenolic modified rosin ester with a high molecular weight and displaying good solubility in aliphatic solvents. The product was created as an elastic co-resin to help add compatibility while not losing structure. Filtrez™ 681 A offers...view more Filtrez™ 681 A is a phenolic modified rosin ester with a high molecular weight and displaying good solubility in aliphatic solvents. The product was created as an elastic co-resin to help add compatibility while not losing structure. Filtrez™ 681 A offers good pigment wetting and is ideally suited for use in offset inks and coatings. view less | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...view more Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. view less | |
| Flex-Rez™ 1084AS A | Lawter | Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is...view more Flex-Rez™ 1084AS A is a polyamide resin that is alcohol soluble, is non-film forming and has the advantage of displaying a high melting point. It also has high heat, grease and gel resistance properties and is a fast solvent release. Flex-Rez™ 1084AS A is suitable for use in flexo/gravure inks for plastics and foils and in overprint varnishes and coatings. view less | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...view more Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. view less | |
| Flex-Rez™ 2433AD A | Lawter | Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographi...view more Flex-Rez™ 2433AD A is an alcohol dilutable polyamide resin that displays good adhesion on substrates like polypropylene, polyethylene and coated foils together with suitable wet-pack resistance. It is considered suitable for use in gravure and flexographic inks, overprint varnishes and heat-seal coatings. view less | |
| Flex-Rez™ 3370CS A | Lawter | Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varn...view more Flex-Rez™ 3370CS A is a polyamide resin that has 100% solids with good adhesion and displaying gel, water, lard, grease, oil and alkali resistance. It is considered suitable for use in flexo/gravure inks for plastics and foils as well as in overprint varnishes and coatings. view less | |
| Flex-Rez™ 4584AD A | Lawter | Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics an...view more Flex-Rez™ 4584AD A is a polyamide resin with 100% solids and is compatible with phenolic and maleic resins. It has good wet pack, gel and block resistance with gloss as an added feature. Flex-Rez™ 4584AD A is used in flexo and gravure inks for plastics and foil, in cold seal release lacquers and in coatings and overprint varnishes. view less | |
| Fluo 400SM | Micro Powders, Inc. | Fluo 400SM is a unique emulsion grade PTFE grade consisting of aggregated sub-micron PTFE spheres ideal for thin film coatings and gloss retention. | |
| Fluoron™ 672 A | Lawter | Fluoron™ 672 A is a PTFE concentrate dispersed in a non-volatile lubricating paste and is designed for abrasion resistance and lubricity in inks. Among the benefits are a narrow particle size distribution, good heat resistance, minimal effect on rheology ...view more Fluoron™ 672 A is a PTFE concentrate dispersed in a non-volatile lubricating paste and is designed for abrasion resistance and lubricity in inks. Among the benefits are a narrow particle size distribution, good heat resistance, minimal effect on rheology and gloss as well as abrasion and mar resistance properties. Fluoron™ 672 A is suitable for use in heatset offset inks, sheet-fed offset inks and in overprint varnishes. view less | |
| Fluoron™ 735 A | Lawter | Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resi...view more Fluoron™ 735 A is a blend of PTFE dispersed in a non-volatile lubricating paste in a high performance additive that gives good slip and rub. It narrows particle size distribution, has minimal effect on rheology and gloss and has good abrasion and mar resistance properties. Fluoron™ 735 A is used in heatset offset inks, sheet-fed offset inks and in overprint varnishes. view less | |
| Fluoron™ 960 A | Lawter | Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on ...view more Fluoron™ 960 A is an ultra-fine PTFE dispersed in a fast-setting resinated vehicle that is formulated to give the best rub resistance and lubricity in inks. It has good slip and heat, abrasion and mar resistance properties while showing minimal effect on rheology and gloss. Fluoron™ 960 A is ideally suited for use in heatset offset inks, in sheet-fed offset inks and in overprint varnishes. view less | |
| FMC-500 | FTC Korea Co.,Ltd | FMC-500 has excellent sagging control and good storage stability and gloss retention. It is suitable for use in clear coats and xylene solvents. | Request Sample |
| FMC-600 | FTC Korea Co.,Ltd | FMC-600 has excellent sagging control and good storage stability and gloss retention. It is suitable for use in clear coats and xylene solvents. | Request Sample |
| FSC-20 | FTC Korea Co.,Ltd | FSC-20 is easy to disperse into coating formulations. It has excellent high viscosity and is a long retained anti-sagging and anti-settling agent. It is suitable for use in marine, architecture, and heavy duty coatings. | Request Sample |
| GENOMER* 3498 | Rahn USA Corp. | GENOMER* 3498 is a modified polyetherpolyol acrylate. Resin for radically curable inks, coatings, and adhesives. | Request Sample |
| GMA-300 | Estron Chemical, Inc. | GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyest...view more GMA-300 is a highly functional, glycidyl-functional acrylic polymer capable of reacting with carboxyl and amine functional compounds to form durable coatings. It can be used either as a sole curing agent for polyesters to make polyester acrylic hybrids, or as a fortifying additive resin at amounts of 15% in systems such as polyester TGIC or hybrids to boost crosslink density, film hardness and chemical resistance. The dosage of GMA-300 as a crosslinker depends on the equivalent weight of the polyester resin. view less | |
| GMA-400 | Estron Chemical, Inc. | GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a ...view more GMA-400 is a solid, high-functionality glycidyl acrylic polymer capable of reacting with carboxyl and amine functional compounds. It can be used either as a sole curing agent for acid-functional polyester resins to make polyester/acrylic hybrids, or as a fortifying additive resin at low loadings in systems such as polyester/TGIC. GMA-400 can also be used in hybrid systems to boost crosslink density and increase film hardness/chemical resistance. view less | |
| GMA-500 | Estron Chemical, Inc. | GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linea...view more GMA-500 is a solid, glycidyl-functional acrylic crosslinker for exterior durable powder coatings. It is highly branched and can cure with carboxyl and amine-functional compounds. For example, GMA-500 can be used as the sole crosslinking agent with a linear carboxyl polyester resin to create an 75/25 polyester/acrylic hybrid powder coating for protective purposes or cured with dodecanedioic acid to make smooth, high gloss, clear top coats. view less | |
| Green 5605 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Green 5605 is a green iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0%, and finds application in v...view more Green 5605 is a green iron oxide pigment that provides maximum tinting strength, water wettability, colour consistency, UV stabilization capabilities, and alkali and chemical resistance. This product has a water content of 1.0%, and finds application in various types of coatings. view less | |
| Gum Rosin WG | SWISLOYD LIMITED | Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents...view more Gum Rosin WG is a yellow solid resin that has a softening point at 75°C with an acid value of 165 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin WW | SWISLOYD LIMITED | Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic so...view more Gum Rosin WW is a light yellow solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, WW-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, WW-Grade, in the form of a pale yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. | |
| Gum Rosin X | SWISLOYD LIMITED | Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many ...view more Gum Rosin X is a pale yellow transparent solid resin that has a softening point at 76°C with an acid value of 166 mgKOH/g. This product is a natural organic compound that is mainly composed of resins and possesses chemical activity when dissolved in many organic solvents. It is primarily used for the production of paints and printing inks. view less | |
| Gum Rosin, X-Grade | Tianyi Chemical Engineering Material Co., Ltd. | Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents...view more Gum Rosin, X-Grade, in the form of a slightly yellow transparent solid, is a natural resin that can be used as a raw material in fabricating coatings and inks. This product is extremely chemically active and can be soluble in a number of organic solvents. view less | |
| Hanwha CP-430 | Hanwha Chemical Corporation | Hanwha CP-430 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-430 is well suited for use in the production of Gravure inks, adhesives and paints. | |
| Hanwha CP-450 | Hanwha Chemical Corporation | Hanwha CP-450 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-450 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha CP-710 | Hanwha Chemical Corporation | Hanwha CP-710 is a Vinyl Chloride-Vinyl Acetate Copolymer with outstanding solvent solubility, adhesion, transparency and liquidity. CP-710 is well suited for use in the production of inks, adhesives and paints. | |
| Hanwha KM-60 | Hanwha Chemical Corporation | Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other prod...view more Hanwha KM-60 is a micro-suspension PSR paste resin made from a Polyvinyl Chloride substrate with low density and a small change when stood up. It is well suitable for use in the production of Tarpaulin coatings, transparent labels, erasers and other products that require good resistance to water and whitening. view less | |
| Harcat Zinc Naphthenate 12 | Huntsman Pigments & Additives | Harcat Zinc Naphthenate 12 carboxylates is a straw coloured concentration of zinc naphthenate in a de-aromatised hydrocarbon solvent used in both the treatment of fibrous materials and rubber applications. | |
| Hauthane HD-2334 | Hauthaway | Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 w...view more Hauthane HD-2334 is a co-solvent free, high solids, flame-retardant, aliphatic, polyurethane dispersion. It was designed for use as a coating or finish for synthetic textile fabrics that must have permanent flame-retardancy. Low add-on levels of HD-2334 will enable synthetic fabrics to pass various FR tests including NFPA-701, MVSS-302 and others. The film properties of HD-2334 also provide a stiff hand and excellent molding/pleating properties. Due to its aliphatic composition, excellent UV resistance is also exhibited. view less | |
| Hauthane L-3415 | Hauthaway | Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include auto...view more Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. view less | |
| HDDA | GIMEL Technical Materials | HDDA,1,6-Hexanediol diacrylate, is a monomer used as a diluent for UV coating and UV ink. | Request Sample |
| HEA | GIMEL Technical Materials | HEA is a monomer used in raw materials for coating resin, paper coating resin, adhesive, and resin modifiers. | Request Sample |
| HEMA | GIMEL Technical Materials | HEMA is a monofunctional monomer used in raw materials for coating resin, paper coating resin, adhesive, and resin modifiers. | Request Sample |
| HHPA | GIMEL Technical Materials | HHPA, hexahydrophthalic anhydride, is a monomer used in paints, epoxy curing agents, polyester resins, adhesives, plasticizers, and intermediates to prevent rust. | Request Sample |
| HPA | GIMEL Technical Materials | HPA, 2-Hydroxypropyl acrylate, is the most popular monomer used for synthesizing both water-borne and solvent-borne acrylic resins. It supplies primary hydroxyl to acrylic resin which offers a fast reaction speed and moderate hardness. | Request Sample |
| HS11-70C | Tianyi Chemical Engineering Material Co., Ltd. | HS11-70C, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane and polyester high-gloss surface paints. This product has a high carboxyl group content, which makes the end ...view more HS11-70C, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane and polyester high-gloss surface paints. This product has a high carboxyl group content, which makes the end product dry faster. The end product will also have a brighter color and higher hardness. view less | |
| HS11-70D | Tianyi Chemical Engineering Material Co., Ltd. | HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end prod...view more HS11-70D, in the form of a light yellow, transparent, viscous liquid, is a soya-oil based short oil alkyd resin that can be used in polyurethane matte exterior coatings and primers. This product has a high carboxyl group content, which makes the end product dry faster. The end product will also have a brighter color and higher hardness. view less | |
| HS2255 | Tianyi Chemical Engineering Material Co., Ltd. | HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It conta...view more HS2255, in the form of a transparent, light yellow, viscous liquid, is an epoxy resin that can be used as an adhesive in solvent-free coatings and concrete floor paint applications. This product contains less than 300 ppm of inorganic chlorine. It contains less than .7% easily saponified chlorine. view less | |
| HS23-60 | Tianyi Chemical Engineering Material Co., Ltd. | HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-re...view more HS23-60, in the form of a clear, transparent, viscous liquid, is a hydroxy acrylic resin that can be used in polyurethane surface coatings, floor coatings, automotive coatings, and top coats. This product has high gloss, is flexible, and shows weather-resistant characteristics. The end product will dry easily with a light-colored finish. view less | |
| HS9301 | Tianyi Chemical Engineering Material Co., Ltd. | HS9301, in the form of a transparent resin, is a pure acrylate resin that can be used in vacuum plating surface paints, top coating varnishes, or metal UV paints. This product is soluble in active monomers or inert solvents. | |
| HS9301B | Tianyi Chemical Engineering Material Co., Ltd. | HS9301B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV cured coatings, paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9303B | Tianyi Chemical Engineering Material Co., Ltd. | HS9303B, in the form of a transparent resin, is a pure acrylate resin that can be used in UV-cured coatings like paper coatings, wooden coatings, metal coatings, or UV inks. This product is soluble in active monomers or inert solvents. | |
| HS9514 | Tianyi Chemical Engineering Material Co., Ltd. | HS9514, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in stain resistant coatings and PCB photo-resistant coatings. This product is resistant to yellowing, stains, and abrasion. Its substrate is an oligomer that...view more HS9514, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in stain resistant coatings and PCB photo-resistant coatings. This product is resistant to yellowing, stains, and abrasion. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. view less | |
| HS9553 | Tianyi Chemical Engineering Material Co., Ltd. | HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. I...view more HS9553, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in special material primers and BMC high-temperature resistant coating systems. This product adheres well to its underplating. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. view less | |
| HS9706 | Tianyi Chemical Engineering Material Co., Ltd. | HS9706, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in gravure inks, inkjet printing applications, oil inks, and gravure varnishes. This product has low viscosity and is highly reactive. | |
| HS9714 | Tianyi Chemical Engineering Material Co., Ltd. | HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good ...view more HS9714, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in offset printing, vacuum plating primers, wooden coatings, and grinding color slurries. This product is resistant to boiling water and exhibits good plating properties with high reactivity. view less | |
| HT100 | Tianyi Chemical Engineering Material Co., Ltd. | HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT105 | Tianyi Chemical Engineering Material Co., Ltd. | HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT115 | Tianyi Chemical Engineering Material Co., Ltd. | HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...view more HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT85 | Tianyi Chemical Engineering Material Co., Ltd. | HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...view more HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT90 | Tianyi Chemical Engineering Material Co., Ltd. | HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...view more HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HT95 | Tianyi Chemical Engineering Material Co., Ltd. | HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...view more HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. view less | |
| HydriCryl 130-S | Hydrite Chemical Co. | HydriCryl 130-S is a high viscosity, high molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 132HV | Hydrite Chemical Co. | HydriCryl 132HV is a high viscosity mid range molecular weight resin solution. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 345 | Hydrite Chemical Co. | HydriCryl 345 is a low molecular weight solution resin for enhancing gloss in coatings and overprint varnishes. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| Hydro PLIOLITE® 050 | Omnova Solutions | Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideall...view more Hydro PLIOLITE® 050 is based on a proprietary ABS technology (Amphoteric Binding System, polymer that contains both anionic and cationic groups). It is a core-shell acrylic copolymer incorporating adhesion promoting monomers. Hydro PLIOLITE® 050 is ideally suited for stain blocking primers and paints, multi purpose low VOC primers. view less | |
| Hydro PLIOLITE® 211 | Omnova Solutions | Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive...view more Hydro PLIOLITE® 211 is a styrene acrylic copolymer designed for high performance waterborne intumescent coatings for indoor or outdoor exposure. Based on the same technology and know-how as durable and effective PLIOLITE® resins for solvent based reactive fire protection coatings, Hydro PLIOLITE 211 APEO-free styrene-acrylic emulsion copolymer offers performance similar to solvent-based coatings. This new binder demonstrates excellent resistance to water and weathering, which helps maintain coating integrity for structural steel exposed to weather extremes during construction. Additionally, its intumescent properties provides an excellent char structure with good adhesion and uniform char consistency. Ideal for all durability categories, it permits the formulation of coatings with 30–120 minutes of best-in-class fire protection. view less | |
| Hydro-Rez™ 1000D A | Lawter | Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film f...view more Hydro-Rez™ 1000D A is a water-based sulfo polyester polymer dispersion that can be used in combination with a higher Tg sulfo polyester polymer as a plasticizing resin or just as a lone resin. When it is used as a plasticizer, the polymer improves film formation, adhesion and flexibility on non-absorbent substrates. The product is a stable dispersion with no surfactants or solvents. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The polymer has the benefit of giving off gloss, adhesion, transparency, fast drying speeds, low odor and scuff resistance on coatings, inks and primers. It is ideally suited for use in water-based primers and coatings or in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1100D A | Lawter | Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the pre...view more Hydro-Rez™ 1100D A is a stable water-based sulfo polyester polymer dispersion with no surfactants or solvents. Since it also has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product gives off a low odor, gloss, fast drying speed, rub, transparency, adhesion and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1100D A is suitable for use in water-based coatings and primers as well as water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1200D2 A | Lawter | Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on th...view more Hydro-Rez™ 1200D2 A is a water-based sulfo polyester polymer dispersion with 30% resin solids with no amines or ammonia. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with Hydro-Rez™ resins don't need pH adjustment on the press. The product has the benefit of providing low odor, gloss, adhesion, transparency, fast drying speed and water, rub and scuff resistance on coatings, primers and inks. Hydro-Rez™ 1200D2 A is suitable for use in water-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 1400D A | Lawter | Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that...view more Hydro-Rez™ 1400D A is a water-based sulfo polyester polymer dispersion which, when used as a plasticizer, helps film formation, adhesion and flexibility when used on non-absorbent substrates. It has no ammonia or amines for neutralization. This means that pH neutral inks formulated with the product's resins don't need pH adjustment on the press. Hydro-Rez™ 1400D A provides gloss, low odor, adhesion, fast drying speed, rub, transparency and scuff resistance to coatings, inks and primers. It is suitable for use in waster-based coatings and primers and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 2140D A | Lawter | Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks...view more Hydro-Rez™ 2140D A is a water-based sulfo polyester polymer dispersion that is compatible with various inorganic and organic pigments which allow it to develop a complete color palette. Since it has no ammonia or amines for neutralization, pH neutral inks formulated with resins from the product line don't need pH adjustment on the press. The product gives off a fast drying speed, low odor, adhesion, gloss, rub, transparency and scuff resistance to coatings, inks and primers. Hydro-Rez™ 2140D A is suitable for use in water-based primers and coatings and in water-based gravure and flexo inks. view less | |
| Hydro-Rez™ 3886 A | Lawter | Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hyd...view more Hydro-Rez™ 3886 A is a fumaric modified rosin ester which shows good compatibility with ethyl cellulose and nitrocellulose and has good solubility in alcohol. It is mostly used in flexographic inks to enhance adhesion and gloss and to increase solids. Hydro-Rez™ 3886 A can also be used is SS nitrocellulose-based lacquer systems if the solvents are to be based on alcohols. Further usage of the product is in carton and specialty inks, spirit varnishes and shellac substitutes. view less | |
| Hydro-Rez™ 5614 A | Lawter | Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its hig...view more Hydro-Rez™ 5614 A is a fumarated modified rosin ester that can be dispersed in water with amines, ammonia or morpholine and is also soluble in alcohol. It displays fast water release in aqueous inks, exhibits good flexibility and low viscosity and its high melting point ensures good leveling and fast solvent release. The product is particularly recommended for use in flexographic inks, while also finding uses in gravure, carton and specialty inks and spirit varnishes. view less | |
| Hydro-Rez™ 5626 A | Lawter | Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins...view more Hydro-Rez™ 5626 A is a fumarated rosin ester that can be dispersed in water with morpholine, ammonia or amines and shows solubility in alcohol. A high melting point provides good leveling and fast solvent release and shows compatibility with manila resins, shellac and most acrylic resins and dispersions. It offers high gloss, a high softening point, flexibility and good color and odor. The product is used in gravure and flexographic inks, overprint varnishes, specialty varnishes, spirit varnishes and carton inks. view less | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| Hydrorexin PU 1083 | S.A.P.I.C.I. SpA | Hydrorexin PU 1083 is a waterborne polyurethane dispersion. This product has good chemical resistance, abrasion resistance, and sandability. Its solvent resistance makes it suitable for use in mixed (water/solvent) coating cycle applications. | |
| IBOA | GIMEL Technical Materials | IBOA, Isobornyl Acrylate, is a monofunctional monomer used as a reactive diluent that is applied in radiation-curable paint, ink, and adhesive. | Request Sample |
| IBOMA | GIMEL Technical Materials | IBOMA, Isobornyl Methacrylate, is a monomer used as a reactive diluent and is applied in radiation-curable paint, ink, and adhesive. | Request Sample |
| Idroben 207 | Benasedo | Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 ca...view more Idroben 207 is an antiyellowing and very fast drying film forming binder with good characteristics of flexibility, adhesion and hardness. It is suggested to formulate non-yellowing topcoats,clear or pigmented, for wood, metals and plastics. Idroben 207 can be used in baking enamels, alone or crosslinked with amino- resins achieving good antiyellowing properties matched with noticeable chemical resistance properties. view less | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| KANEKA MS POLYMER® | Kaneka North America LLC | KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial ap...view more KANEKA MS POLYMER® is an isocyanate-free, low-VOC Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. KANEKA MS POLYMER® has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the various Silane functional groups, which vary based on grade. With over 40 grades available, KANEKA MS POLYMER® is suitable for a variety of requirements. view less | Request Sample |
| KELSOL® 3906-B2G-75 | Polynt Composites | KELSOL® 3906-B2G-75 is a water-dispersible alkyd resin that can be used in air-dry or force-dry primers and topcoats, as well as in spray, dip or flowcoat applications. This product has good humidity and water-resistance with a good air-dry rate. It is al...view more KELSOL® 3906-B2G-75 is a water-dispersible alkyd resin that can be used in air-dry or force-dry primers and topcoats, as well as in spray, dip or flowcoat applications. This product has good humidity and water-resistance with a good air-dry rate. It is also corrosion-resistant. view less | |
| KELSOL® 3961-B2G-75 | Polynt Composites | KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give corrosion resistance and a very fast dry rate. It can be used in fast air-dry or force-dry topcoats and primers, spray, dip and flowcoat applications, and baking systems that...view more KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give corrosion resistance and a very fast dry rate. It can be used in fast air-dry or force-dry topcoats and primers, spray, dip and flowcoat applications, and baking systems that use melamine resins. This product has a high hydroxyl rate, which makes it compatible with cross-linking agents. view less | |
| KELSOL® 3964-B2G-70 | Polynt Composites | KELSOL® 3964-B2G-70 is a water-dispersible, chain-stopped alkyd that can be used in fast air-dry or force-dry topcoats and primers, spray, dip and flowcoats, and in baking enamels. This product features a fast air-dry rate, with a high hydroxyl value for ...view more KELSOL® 3964-B2G-70 is a water-dispersible, chain-stopped alkyd that can be used in fast air-dry or force-dry topcoats and primers, spray, dip and flowcoats, and in baking enamels. This product features a fast air-dry rate, with a high hydroxyl value for better cross-linking. view less | |
| KELSOL® 3966-B2G-70 | Polynt Composites | KELSOL® 3966-B2G-70 is a water-dispersible, chain-stopped alkyd resin that can be used in fast air-dry or force-dry topcoats and primers, baking enamels, and in spray, dip and flowcoat applications. This product has good corrosion resistance and a high hy...view more KELSOL® 3966-B2G-70 is a water-dispersible, chain-stopped alkyd resin that can be used in fast air-dry or force-dry topcoats and primers, baking enamels, and in spray, dip and flowcoat applications. This product has good corrosion resistance and a high hydroxyl value for better cross-linking capacity. view less | |
| KELSOL® 3969-B2G-70 | Polynt Composites | KELSOL® 3969-B2G-70 is a water-dispersible, chain-stopped alkyd resin that can be used in topcoats and primers for air-dry, force-dry, or baking enamels and in spray, dip or flowcoat applications. This product features good corrosion and humidity resistan...view more KELSOL® 3969-B2G-70 is a water-dispersible, chain-stopped alkyd resin that can be used in topcoats and primers for air-dry, force-dry, or baking enamels and in spray, dip or flowcoat applications. This product features good corrosion and humidity resistance with good gasoline and early water resistance. It can be crosslinked with melamine resins and can be blended with styrenated acrylic emulsions. view less | |
| KELSOL® 585-W-43 | Polynt Composites | KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be ...view more KELSOL® 585-W-43 is a water dispersion alkyd resin that can be used in high solids coatings for fast water reduction, inks requiring a quick set and early wet rub resistance, and as a modifier for other water-reducible resins or emulsions. It can also be used in fast air-dry or force-dry industrial primers, enamels, and clear finishes. view less | |
| KOSMOS® T 100 | Evonik Operations GmbH, BL Comfort & Insulation | KOSMOS® T 100 is the strongest gel catalyst particularly suitable for fast curing applications such as spray coatings and RIM. | |
| L-2812 | Chan Sieh Enterprises Co, Ltd. | L-2812 is an aliphatic polyether polyol with a solid content ratio of 30%. This product is soft and flexible, provides water resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. | |
| L-2812M | Chan Sieh Enterprises Co, Ltd. | L-2812M is an aliphatic polyether polyol with a solid content ratio of 35%. This product is soft and flexible, provides water-resistance, and does not yellow. It can be used to coat flexible substrates, and to coat leather. |
