| RPF90 | Guangxi Zhongchang Resin Co., Ltd. | RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low ca...view more RPF90 is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than four and an acid number less than or equal to 20 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| RPF90W | Guangxi Zhongchang Resin Co., Ltd. | RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low ca...view more RPF90W is a light yellow flaky solid and a modified rosin pentaerythritol ester. This product has a softening point between 87-93ºC, a gardner color of less than one and an acid number less than or equal to 25 mgKOH/g. It provides dissolvability in low carbon alcohol, light color aging resistance and light resistance that is widely used in alcohol soluble and water soluble precoated adhesive, pressure-sensitive adhesive, plastic printing ink and electronic flux. view less | |
| S122 | GIMEL Technical Materials | S122 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and a small influence on curing speed. | Request Sample |
| S123 | GIMEL Technical Materials | S123 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and small influence on curing speed. | Request Sample |
| S128 | GIMEL Technical Materials | S128 is a high-efficiency stabilizer used in inks, coatings, and adhesives. It shows excellent polymerization inhibition effect and small influence on curing speed. | Request Sample |
| SA | GIMEL Technical Materials | SA, Succinic anhydride, is a monomer used in pharmaceutical intermediates, plasticizers, and adhesives. It has a white, granule appearance with 99% purity. It is a white, flake granule. | Request Sample |
| SCD 1040 | Etna Tec Limited, LLC | SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids ba...view more SCD 1040 is an oil-free polyester resin that is designed precisely for low VOC finishes. This product is compatible with alkyds and acrylics when used as a modifier to improve dry film properties. It is primarily used in machinery coatings, high solids baking enamels, and automotive OEM. view less | |
| SCD 1091 | Etna Tec Limited, LLC | SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties...view more SCD 1091 is an oil-free polyester resin that is designed specifically for excellent adhesion to a variety of metal and plastic substrates. It also offers a hardness/flexibility ratio at low temperature cure cycles while retaining excellent film properties. When modifies with SCD 1040, less than 3.0 pounds/gallon V.O.C. coatings can be formulated with SCD 1091. view less | |
| Setaprint™ 150 A | Lawter | Setaprint™ 150 A is a phenolic modified rosin ester offering a high viscosity and molecular weight resin with a workable dilution range. The high viscosity allows it to offer greater compatibility with alkyds and drying oils than before. Dot sharpness, gl...view more Setaprint™ 150 A is a phenolic modified rosin ester offering a high viscosity and molecular weight resin with a workable dilution range. The high viscosity allows it to offer greater compatibility with alkyds and drying oils than before. Dot sharpness, gloss, transfer, press stability and gel structure are all improved because of the combination of the properties. Setaprint™ 150 A is ideally used in sheet-fed and heatset gel vehicles and in overprint and gloss varnishes. view less | |
| Setaprint™ 2243 A | Lawter | Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setapr...view more Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setaprint™ 2243 A is ideally used in offset inks and coatings. view less | |
| SHIKOH™ UV-1700B | Nippon Gohsei | SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tape...view more SHIKOH™ UV-1700B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent adhesion and hardness properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-2000B | Nippon Gohsei | SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optic...view more SHIKOH™ UV-2000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity and electrical sealing properties. This product is well suited for use in applications such as plastic and electronic coatings, optical adhesives, masking tapes, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-2750B | Nippon Gohsei | SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes...view more SHIKOH™ UV-2750B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength. This product is well suited for use in applications such as plastic and electronic coatings, optical disk printing inks, masking tapes, screen printing inks, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-3000B | Nippon Gohsei | SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3000B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3200B | Nippon Gohsei | SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhes...view more SHIKOH™ UV-3200B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good rubber elasticity. This product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, and adhesive films and labels. view less | |
| SHIKOH™ UV-3210EA | Nippon Gohsei | SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optica...view more SHIKOH™ UV-3210EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good moisture and heat resistance, this product is well suited for use in applications such as adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. view less | |
| SHIKOH™ UV-3300B | Nippon Gohsei | SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive f...view more SHIKOH™ UV-3300B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring high elongation and good rubber elasticity. This product is well suited for use in metal undercoats and primers, plastic and electronic coatings, adhesive films and labels, and optical applications. view less | |
| SHIKOH™ UV-3310B | Nippon Gohsei | SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and pri...view more SHIKOH™ UV-3310B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good weather, moisture, and heat resistances. This product is well suited for use in adhesive films and labels, optical disc adhesives, and coatings and primers for plastic and electronic applications. view less | |
| SHIKOH™ UV-3500BA | Nippon Gohsei | SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and elec...view more SHIKOH™ UV-3500BA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in butyl acetate. Featuring exceptional strength, this product is well suited for use in applications such as metal undercoats and primers, plastic and electronic coatings, adhesive films and labels. view less | |
| SHIKOH™ UV-3520EA | Nippon Gohsei | SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, ad...view more SHIKOH™ UV-3520EA is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring exceptional strength, this product is well suited for use in primers and coatings for building and construction applications, adhesive films and labels, and plastic and electronic coatings. view less | |
| SHIKOH™ UV-3700B | Nippon Gohsei | SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings a...view more SHIKOH™ UV-3700B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water resistance, high adhesion, and good flexibility. This product is well suited for use in applications such as solventless UV adhesives, coatings and primers for plastics and electronics, and adhesive films and labels. view less | |
| SHIKOH™ UV-6300B | Nippon Gohsei | SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and ...view more SHIKOH™ UV-6300B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good stain and crack resistances. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-6630B | Nippon Gohsei | SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, pla...view more SHIKOH™ UV-6630B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, good water resistance, and good adhesion. This product is well suited for use in coatings for PVC flooring, optical discs, woodworking, plastics, and electronics, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-6640B | Nippon Gohsei | SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optica...view more SHIKOH™ UV-6640B is a soft-and-elastic-type, UV-curable urethane acrylate oligomer resin featuring good water and weather resistances, as well as good adhesion to plastics. This product is well suited for use in coatings, primers, and adhesives for optical discs, plastics, and electronics, as well as adhesive films and labels. view less | |
| SHIKOH™ UV-7000B | Nippon Gohsei | SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and scree...view more SHIKOH™ UV-7000B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring exceptional strength, as well as good stain and abrasion resistances. This product is well suited for use in building and construction coatings, offset and screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| SHIKOH™ UV-7461TE | Nippon Gohsei | SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plasti...view more SHIKOH™ UV-7461TE is a medium-hard-type, UV-curable urethane acrylate oligomer resin, diluted in acrylic ester. Featuring good weather resistance, this product is well suited for use in screen printing inks, coatings for optical discs, woodworking, plastics, and electronics, adhesive films and labels, and masking tapes. view less | |
| SHIKOH™ UV-7510B | Nippon Gohsei | SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, a...view more SHIKOH™ UV-7510B is a medium-hard-type, UV-curable urethane acrylate oligomer resin featuring good weather and water resistances, flexibility, and resistance to permanent marker. This product is well suited for use in building and construction coatings, adhesive films and labels, masking tapes, and coatings for optical discs, woodworking, plastics, and electronics. view less | |
| SHIKOH™ UV-7600B | Nippon Gohsei | SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and l...view more SHIKOH™ UV-7600B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness and low shrinkage. This product is well suited for use in optical film hard coatings, masking tapes, plastic and electronic coatings, adhesive films and labels, and woodworking applications. view less | |
| SHIKOH™ UV-7610B | Nippon Gohsei | SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking...view more SHIKOH™ UV-7610B is a hard-type, UV-curable urethane acrylate oligomer resin featuring a high molecular weight. This product is well suited for use in hard coatings for plastics, electronics, optical discs, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7620EA | Nippon Gohsei | SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs...view more SHIKOH™ UV-7620EA is a hard-type, UV-curable urethane acrylate oligomer resin, diluted in ethyl acetate. Featuring good adhesion on hard-to-adhere materials and tack-free surface formation, this product is well suited for use in coatings for optical discs, plastics, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7630B | Nippon Gohsei | SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...view more SHIKOH™ UV-7630B is a hard-type, UV-curable urethane acrylate oligomer resin featuring good crack resistance. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SHIKOH™ UV-7640B | Nippon Gohsei | SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, ele...view more SHIKOH™ UV-7640B is a hard-type, UV-curable urethane acrylate oligomer resin featuring high hardness, low shrinkage, and good abrasion resistance. This product is well suited for use in optical film hard coatings, masking tapes, coatings for plastics, electronics, and woodworking applications, and adhesive films and labels. view less | |
| SHIKOH™ UV-7650B | Nippon Gohsei | SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking t...view more SHIKOH™ UV-7650B is a hard-type, UV-curable urethane acrylate oligomer resin featuring excellent flexibility. This product is well suited for use in hard coatings for plastics, optical discs, electronics, and woodworking applications, as well as masking tapes and adhesive films and labels. view less | |
| SiSiB® PC5131 | SiSiB SILICONES | SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used main...view more SiSiB® PC5131 is a colorless clear liquid. It is an alkylalkoxysilane that hydrolyzes slowly in the presence of moisture (methanol released) to form reactive silanols, which react further to produce oligosiloxanes and then polysiloxanes. It is used mainly to render surfaces and material water repellent, but can also be used in the production of silicone resins and condensation-curing silicone rubber, and as a component in sol-gel systems. view less | |
| SiSiB® PC5132 | SiSiB SILICONES | SiSiB® PC5132 is a colorless clear liquid. It hydrolyzes slowly in the presence of moisture to form reactive silanols. It may be used as a water repellent to improve fillers dispersibility and reduces the sedimentation tendency, or as a component in sol-...view more SiSiB® PC5132 is a colorless clear liquid. It hydrolyzes slowly in the presence of moisture to form reactive silanols. It may be used as a water repellent to improve fillers dispersibility and reduces the sedimentation tendency, or as a component in sol-gel coating, silicone resins, and silicone rubber. view less | |
| SiSiB® PC5821 | SiSiB SILICONES | SiSiB® PC5821 is a clear to straw liquid. It is a long-chain alkyl silane. It can be used as a water-repellent by impregnation due to its hydrophobicity, or for the treatment of mineral fillers and pigments or inorganic surfaces. | |
| SiSiB® PC5861 | SiSiB SILICONES | SiSiB® PC5861 is a clear to straw liquid. It is a monomeric long chain alkyfunctional silane. It can be used as a water-repellent or surface modifier due to its hydrophobicity, as a mineral filler treatment, as a scorch retardant in moisture crosslinked...view more SiSiB® PC5861 is a clear to straw liquid. It is a monomeric long chain alkyfunctional silane. It can be used as a water-repellent or surface modifier due to its hydrophobicity, as a mineral filler treatment, as a scorch retardant in moisture crosslinked write and cable compounds, or for polyolefin production. view less | |
| SiSiB® PC5901 | SiSiB SILICONES | SiSiB® PC5901 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of ...view more SiSiB® PC5901 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of water repellent products. view less | |
| SiSiB® PC5902 | SiSiB SILICONES | SiSiB® PC5902 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of wa...view more SiSiB® PC5902 is a colorless transparent liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, and when diluted with an appropriate solvent, can be used in for the formulation of water repellent products. view less | |
| SiSiB® PC5904 | SiSiB SILICONES | SiSiB® PC5904 is a clear to straw liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, or when diluted with an appropriate solvent, can be used in the formulation of water repell...view more SiSiB® PC5904 is a clear to straw liquid. It is a monomeric medium-chain alkylfunctional silane. It can be used as a surface modifier to generate hydrophobicity, or when diluted with an appropriate solvent, can be used in the formulation of water repellent products. view less | |
| SL Tung Stand Oil - 90 Poise | SWISLOYD LIMITED | SL Tung Stand Oil - 90 Poise is a transparent yellowish-brown liquid that is obtained by pressing the seed from the nut of the Tung tree. This product is a drying oil that dries upon exposure to air resulting a transparent and plastic-like coating. | |
| Soya Fatty Acid | SWISLOYD LIMITED | Soya Fatty Acid is a monocarboxylic acid that is made of soya bean oil. This product is formulated to have an acid value in the range of 195-205 mgKOH/g. It is primarily used in paints, alkyd resins, inks, coatings and surfactants. | |
| ST-844 | Quaker Color (a Division of McAdoo & Allen, Inc.) | ST-844 is a solvent free, inherently dull, soft feel aliphatic urethane dispersion. ST-844 has a unique combination between soft feel, flexibility and toughness. It can be used in conjunction with isocyanate crosslinker or as is. | |
| StanChem SC 5174 | StanChem Polymers | StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with S...view more StanChem SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility. view less | Request Sample |
| StanChem SC 5218 | StanChem Polymers | StanChem SC 5218 is a surfactant stabilized vinyl/acrylic copolymer emulsion for paints and coatings. SC 5218 provides formulators with superior scrub resistance, durability and flexibility. | Request Sample |
| STRUKTOSIL 45 MAM | Hoffmann Mineral | STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, rel...view more STRUKTOSIL 45 MAM is a special activated talc, produced by modifying the surface with a methacrylic functional group. The process parameters are selected in such a way that, on the one hand, anchoring to the surface takes place and, on the other hand, released by-products are removed as far as possible during production. Undesirable byproducts, such as occur during in situ mixings (i.e. during the direct addition of the additives), are therefore practically completely prevented and the material improves its hydrophobic properties. view less | |
| STYROFAN® NX 1492 | BASF Dispersions & Resins | STYROFAN NX 1492 is a styrene butadiene dispersion ideal for waterproofing mastics and air weather barriers. It provides excellent water resistance, low moisture vapor permeability, flexibility, crack bridging and good filler compatibility. This product i...view more STYROFAN NX 1492 is a styrene butadiene dispersion ideal for waterproofing mastics and air weather barriers. It provides excellent water resistance, low moisture vapor permeability, flexibility, crack bridging and good filler compatibility. This product is non-APEO. view less | |
| Sunmide® 307D-60 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 307D-60 Curing Agent is a polyamide amine in xylene and n-butanol. It displays very good thixotropic properties. It is most commonly used for fast cure and fast dry applications for industrial epoxy coatings. | Request Sample |
| Sylysia | Fuji Silysia Chem. Ltd. | Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resi...view more Sylysia is characterized by large internal surface area with a large number of pores, forming a three dimensional structure by the silicate. These properties are precisely controlled to meet a wide variety of applications. Sylysia has applications in resin and water-based paints, inks, plastic films, pharmaceuticals & cosmetics, adhesives, as well as sensitized, electrostatic recording, and impact paper. view less | |
| SYNTHEMUL® 40-136 | Polynt Composites | SYNTHEMUL® 40-136 is a conventional vinyl acrylic latex copolymer supplied at 55% solids which can be used in interior flat paints, satin paints, semi-gloss paints, primers, contractor paints, and low-cost exterior flats where wet adhesion is not a requir...view more SYNTHEMUL® 40-136 is a conventional vinyl acrylic latex copolymer supplied at 55% solids which can be used in interior flat paints, satin paints, semi-gloss paints, primers, contractor paints, and low-cost exterior flats where wet adhesion is not a requirement. This product develops good gloss in latex enamels and is easy to formulate. view less | |
| TEC 3065 | Etna Tec Limited, LLC | TEC 3065 is a multifunctional acrylate based reactive dilutent. This product contains no volatile organic compounds (VOC), and can be used in paints and solvent based coatings without sacrificing coating performance. | |
| TEC 3570 | Etna Tec Limited, LLC | TEC 3570 is a Multifunctional Acrylate based reactive resin system. It contains Etna-TEC’s (E-TEC) patented cure technology, which allows it to be thermally cured in the presence of oxygen. TEC 3570 is a low viscosity, 100% NVM liquid, and thus, contains ...view more TEC 3570 is a Multifunctional Acrylate based reactive resin system. It contains Etna-TEC’s (E-TEC) patented cure technology, which allows it to be thermally cured in the presence of oxygen. TEC 3570 is a low viscosity, 100% NVM liquid, and thus, contains no Volatile Organic Compounds (VOC). view less | |
| TEGO® Foamex 11 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 11 is a highly efficient, especially low-VOC defoamer emulsion based on polyether siloxane technology. Developed for architectural paints. | Request Sample |
| TEGO® Protect 5000 N | Evonik Operations GmbH, BL Coating Additives | TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro...view more TEGO® Protect 5000 N is a liquid, anti-graffiti additive with utmost effectiveness. It is a solvent-free, hydroxy-functional polydimethyl siloxane with good marker resistance and an anti-graffiti effect. TEGO® Protect 5000 N also has an outstanding hydro- and oleophobic properties for 2-pack coatings based on acrylic/isocyanate and polyester/isocyanate applications. TEGO® Protect 5000 N is dilutable by esters, ketones and glycol ethers and is recommended to be added at the grind stage in pigmented formulations. view less | Request Sample |
| TEGO® Therm HPG 4000 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 4000 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 4000 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm HPG 6806 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm HPG 6806 is a purely mineral product based on silicone dioxide. TEGO® Therm HPG 6806 can be combined with other materials to produce thermal insulation coatings. | Request Sample |
| TEGO® Therm L 300 | Evonik Operations GmbH, BL Coating Additives | TEGO® Therm L 300 is a hybrid polysiloxane dispersion. | Request Sample |
| TEGOSTAB® B 8900 | Evonik Operations GmbH, BL Comfort & Insulation | TEGOSTAB® B 8900 is a silicone-based surfactant with strong cell-opening and degassing properties. | |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flu...view more Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. view less | |
| Terlon™ 603 A | Lawter | Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The prod...view more Terlon™ 603 A is a drying oil alkyd that possesses good pigment wetting ability, displays good adhesion and transfer and improves tack stability. It has the ability to carry and print higher pigment loads than conventional alkyds and bodied oils. The product has good color retention capabilities, making it ideal for use in heat-induced drying applications. It is suitable for use in coldset, web heatset, metal decorating inks and varnishes. view less | |
| Terlon™ 605 A | Lawter | Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include t...view more Terlon™ 605 A is a drying oil alkyd which can carry and print a higher pigment load than conventional alkyds and bodied oils. It has good color retention capabilities making it suitable for use in heat-induced drying applications. Other benefits include the ability to improve tack stability, transfer and adhesion. It is ideally suited for use in coldset, web heatset systems and metal decorating inks and varnishes. view less | |
| Terlon™ 607 A | Lawter | Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. T...view more Terlon™ 607 A is a drying oil alkyd with a soybean base that is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It displays good color retention ability making it ideal for use in heat-induced drying applications. The product is able to facilitate tough, flexible ink films and is suitable for use in coldset systems, in web heatset and varnishes as well as in metal decorating inks. view less | |
| Terlon™ 613 A | Lawter | Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oi...view more Terlon™ 613 A is a drying oil alkyd with a soybase base and color retention characteristics that make it ideal for use in heat-induced drying applications. The product is able to carry and print a higher pigment load than conventional alkyds and bodied oils. It enhances tough flexibility in ink films, improves adhesion and transfer as well as tack stability. It is suitable for use in web heatset, varnishes, metal decorating inks and coldset systems. view less | |
| TKA-396 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environmen...view more TKA-396 is a solid alcohol soluble acrylic resin that is soluble in alcohol, ester, ketone, and aromatics at normal temperatures. This product features good gloss and abrasion resistance and is applied in inks and coatings that require a strict environment. It finds application in alcohol soluble inks, coatings, and adhesives. view less | |
| TKB-1C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings,...view more TKB-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-1D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings,...view more TKB-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a blue-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-3C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-3C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application...view more TKB-3C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-3D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-3D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 45 micrometers and finds application...view more TKB-3D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4A | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.5 to 2 millimeters and finds application...view more TKB-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.5 to 2 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 65 to 85 micrometers and finds application...view more TKB-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 65 to 85 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4BA | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.15 to 0.3 millimeters and finds applica...view more TKB-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 0.15 to 0.3 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 45 to 55 micrometers and finds application...view more TKB-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 45 to 55 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKB-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKB-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application...view more TKB-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKBW-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKBW-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and p...view more TKBW-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows in a blue-green color. It has a particle size of 15 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-1C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coating...view more TKG-1C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-1D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 15 to 40 micrometers and finds application in coating...view more TKG-1D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for ten hours in a yellow-green color. It has a particle size of 15 to 40 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds applicati...view more TKG-2C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 55 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 15 to 45 micrometers and finds applicati...view more TKG-2D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-2EW | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-2EW is a photoluminescent pigment manufactured with TK pigments through a coating process. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and fi...view more TKG-2EW is a photoluminescent pigment manufactured with TK pigments through a coating process. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds application in water-based paints and inks. view less | |
| TKG-4A | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds applicati...view more TKG-4A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds applicati...view more TKG-4B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4BA | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds appli...view more TKG-4BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds applicati...view more TKG-4C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds applicati...view more TKG-4D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-4E | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-4E is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds applicatio...view more TKG-4E is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 5 to 15 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-6A | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-6A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds applicati...view more TKG-6A is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.5 to 2 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-6B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-6B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds applicati...view more TKG-6B is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 65 to 85 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-6BA | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-6BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds appli...view more TKG-6BA is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 0.15 to 0.3 millimeters and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-6C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-6C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds applicati...view more TKG-6C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 45 to 55 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKG-6D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKG-6D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds applicati...view more TKG-6D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a light yellow powder and glows for more than twelve hours in a yellow-green color. It has a particle size of 25 to 35 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKP-6C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKP-6C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for three hours in a purple color. It has a particle size of 45 to 75 micrometers and finds application in coatings, inks, pa...view more TKP-6C is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for three hours in a purple color. It has a particle size of 45 to 75 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKP-6D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKP-6D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for three hours in a purple color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, pa...view more TKP-6D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for three hours in a purple color. It has a particle size of 15 to 45 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TKSB-8D | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKSB-8D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for six hours in a blue color. It has a particle size of 15 to 50 micrometers and finds application in coatings, inks, paint...view more TKSB-8D is a photoluminescent pigment that is made from alkaline earth aluminate. This product appears as a white powder and glows for six hours in a blue color. It has a particle size of 15 to 50 micrometers and finds application in coatings, inks, paints, and printing pastes. view less | |
| TMP3EOTA | GIMEL Technical Materials | TMP3EOTA, 3Ethoxylated trimethylolpropane triacrylate, is a trifunctional monomer used in UV curable ink and coatings. | Request Sample |
| TMPTA | GIMEL Technical Materials | TMPTA, trimethylolpropane triacrylate, is a trifunctional monomer used in UV-curable ink and coatings. | Request Sample |
| TPGDA | GIMEL Technical Materials | TPGDA, tripropylene glycol diacrylate, is a monomer appearing in a transparent liquid with 95% purity. It is used as a diluent for UV coating, and UV ink. | Request Sample |
| Tylac® 4193 | Mallard Creek Polymers, Inc. | Tylac® 4193 is a soft, flexible styrene-butadiene concrete modifier. It may be used at low add-on to give strength, flexibility and water/ion resistance to cementitious systems. At higher add-on levels, Tylac® 4193 gives a flexible cementitious damp proof...view more Tylac® 4193 is a soft, flexible styrene-butadiene concrete modifier. It may be used at low add-on to give strength, flexibility and water/ion resistance to cementitious systems. At higher add-on levels, Tylac® 4193 gives a flexible cementitious damp proofing membrane. view less | |
| Ucopol OL 18 50 X | S.A.P.I.C.I. SpA | Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw material...view more Ucopol OL 18 50 X is an oleo-urethanic resin. This product dries quickly with good weather resistance and hardness. It can be used in anti-corrosive paints and as an impregnating agent for wood. This product has been obtained from renewable raw materials. view less | |
| Ucopol OL 51 60 OD | S.A.P.I.C.I. SpA | Ucopol OL 51 60 OD is an oleo-urethanic resin. This product dries quickly with good weather resistance. It can be used in high quality gloss and matte coatings. It will show a good overcoating performance. This product has been obtained from renewable...view more Ucopol OL 51 60 OD is an oleo-urethanic resin. This product dries quickly with good weather resistance. It can be used in high quality gloss and matte coatings. It will show a good overcoating performance. This product has been obtained from renewable raw materials. view less | |
| Ultrafine™ 1W A | Lawter | Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective perfo...view more Ultrafine™ 1W A is a micronized ultrafine polytetrafluoroethylene powder to improve surface properties of coatings and printing inks. It is made for heat resistance, abrasion and lubricity and can be used together with other waxes for more effective performance and cost. Ultrafine™ 1W A is used in heatset and sheet-fed offset inks and in UV, metal deco and overprint varnishes. view less |
